Table in Master Page

Hi all,
According to my requirement i have one table which i have to display on the master page.Now my problem is that is it appers only on the first page of the pdf.Rest of the pages doesnot show that table which i have put in master page.
Thanks in advance.

You can control by Form Calc.
In READY LAYOUT
var curpage = $layout.page ( ref ( $ ) )
if ( curpage = 1 ) then
$.presence = "visible"
endif
Kanagaraja L

Similar Messages

Inserting variable data markers in tables on master pages

I have a two-cell table on a verso master page that is styled and set to hold my <ChapterNumber> and <ChapterTitle>. A one-cell table is set on the recto master page to hold my <A_Head>.<br /><br />The problem is that I can't seem to insert the variables into the table cells. They work fine when inserted into standard text frames, but I can't see the markers on the master pages, nor does the data associated with the appropriate paragraph styles show up on the regular pages, as it does when I simply insert the variables into standard text frames.<br /><br />I tested the default variables that are installed with InDesign CS3, and they can be inserted into the table cells on the master pages and display on the regular pages. The variables that I defined work properly in a text frame, but not in a table.<br /><br />Is there an explanation for this? The cells have styles associated with them, but there's plenty of room in the cells for the variables. Any advice will be appreciated. Thanks!

This is so weird. In my original file, I did everything that you did, and even when I flipped back through the pages, the information wasn't appearing in the appropriate cells
(BTW, the chapter number actually goes next to the word "Chapter" in the green cell on the verso, and the A head actually goes in the white cell on the recto; chapter title will be in the white cell on the verso). The markers were showing up--thinly, as you pointed out--when I had originally inserted the markers, but the difference was that I did not see the results on the actual pages. Go figure. Everything looks fine now, and there were no problems with my variables.
I have avoided using the default Chapter Number variable because it doesn't reflect the chapter number based on what the chapter number is in the text provided by the client. For example, I changed the chapter number on the chapter opener just now to 12, and the variable you inserted for the chapter number did not update; it stayed at 10, because that variable is based on the Document Chapter Numbering feature, not on text. When I use a running header variable based on the CN paragraph style I define, my chapter number variables are correct, and if the text changes, the change is picked up without having to go to the Pages panel. It's just a different way of doing things.
Thanks for checking the file!

Repeating Table in Master Pages

Hi =)
I'm having some trouble with a dynamic xml form I'm creating.
Inside a page I have a repeating table that allows the user to insert a new row (max 4 rows).
All I want is this page to adjust nicely to the size of the repeating table.
Since I've read that it is not possible to change master page size through javaScript, I've created a page set with different sized master pages that adjust to the different number of rows.
I tried to set some conditional breaks to change from master page to master page accordingly to the table size. The thing is, whenever the user adds a row, the two master pages will appear. The first one blank and the next one with the table.
I think I only need a way to make the previous master page disappear.
Can someone give me some advise?
I need help.
Thank you =)

Hi =)
I'm trying something different: I want to make the blank pages disappear by changing the position of the Pages in the Page Set.
Suppose the table only has 2 rows.
The script on the click event of the button "add row" is the following:
     //Adds an instance to the row
     form1.page1a.Table1.Row1.instanceManager.addInstance(true);
     //Counts the number of instances
     var n = form1.page1a.Table1.Row1.instanceManager.count;
     //If number of instances = 2 then the Pages position is changed
     if (n == 2){
          xfa.form.form1.page1a.pageSet.Page1.pagePosition = "rest";
          xfa.form.form1.page1a.pageSet.Page2.pagePosition = "first";
I also have a conditional break in the Table1 like this:
     "When"
          form1.page1a.Table1.Row1.instanceManager.count == 2
     "Break"
          before
     "to"
          Page2
This forces the entire table to change to the Page2 once it has 2rows.
The only thing that ruins this brilliant idea (cof cof =P) is...well, are this commands:
     xfa.form.form1.page1a.pageSet.Page1.pagePosition = "rest"
     xfa.form.form1.page1a.pageSet.Page2.pagePosition = "first";
They don't work! Why? Does anyone know?
Thanks =)

Problem in displaying dynamic table placed in master page

Hi all,
I have placed a dynamic table in my master page. When the page overflows the dynamic table is shown only in 1st page. I want this table to be shown in every page. Please help me solve this.
Regards,
Devaiah

hi,
Thank you all for your reply. But i cannot keep the table in body page as i want this table to be displayed in every page in the header. Actually i am displaying an address through this table.
I have moved the content area in master page to center and reduced its size and in the body page i have placed a table which will display the report. When this table overflows to next page all the contents in master page are shown except for the address table in master page. I am not sure whether i am doing it the right way as i am bit new to adobe forms.
Please let me know where am i going wrong. Also please suggest me some alternative method ( if any ) to display the address in every page if the above method is not feasible.
Regards,
Devaiah

Include Master Page Items in Table of Contents

I am building a table of contents in InDesign CS3. I've got paragraph style applied to my section heading and well as section subheadings. However, my sections headings are located on Master Pages (as they are repeating on several pages), and my section subheadings are located directly on the pages themselves (as they do not repeat).
When I set up my table of contents only my section subheadings show up, not both. When I go to a page with a section heading and override the master page item and then update my table of contents my section header shows up. Is there any way to include my secion headers without overriding the master page items?
-Carina

I found this article about using Power Headers to override master frames that addresses the table of contents issue: http://in-tools.com/article/power-headers/power-headers-overrides-master-frames/
Hope this helps!

No master pages applied because MasterPageMaps table contains no mapping information

I use FM8 and DITA files to create my books. I have tired in the past to apply masters automatically but have not been able to. Now that I create books from xml, it is even more important to automate this process. I use structured FM and have deleted and re-created the StructMasterPageMaps in my file. I created a book that has my one test file so I can experiment quickly. In that file I have a Master page defined as Chapter_cover which I can apply manually no problem. In the StructMasterPageMap, I refer to the paragraph tag title.0 and the right-hand MasterPage Chapter_cover and set the range to Single.
When I then select the book and try to update the master pages (Update book->Master Pages->update), I get the error "No master pages applied because the MasterPageMaps table contains no mapping information.
I have searched the forum and the archive and found an instance similar to mine (Jun19/07), but no clear resolution was found. I have tried the suggestions made therein such as re-creating the MasterPages reference page, which I have done. And I am sure that I have typed them correctly (case sensitive etc).
What could be my problem? I could send the book since it consists of only one 2-page fm file.
Thanks in advance for any help,
Kevin

Further to this problem, I found that if I create a brand new file, import the structure definitions and then refer to E:title in the StructMasterPage table, it will apply the Master page, but not when I refer to the paragraph tag title.0
So I see that I am close, but I cannot use the Title element since it is used by all the tasks in the real files. Only the title.o paragraph tag will flag the first page.
Does anyone have any suggestions why the p tag does not work while the element does?
I have tried defining E:title or title and p:title.0 or title.0 to see if that made a difference, but it did not.
Thanks again

How to show master and detail tables in different pages?

Hi,
Can somebody expalin me how to include or bind the master and detail tables to different pages which are included at runtime.
thnaks,
Naresh.

Hello!
you have ti create a Master/Detail data structure.
In the first page drag the master table, on the second drag a detail table.
It should work out of the box. Selecting a record on the master table selects
the details on the detail table automatically!
regards,
Mario Udina

2 master pages with table data flow

Hi,
My form got 2 master pages. Each master page will display atleast once in the output preview. First page displays table data which may or may not flow to the second page depending on the no.of records. But, the form will show both the master pages in pdf preview( even if the second master page is empty).
Now, I have a field in the both the master pages which will show the total amount. Total amount field will have a value which should be displayed in the first page if the data doesn't flow to the second page. The total should display in the second page if data flows to the second page. Where can I write the condition and how will I know whether the form is flowing to the second page or not? I cannot write based on the pagecount because the output will always contain 2 pages.
How will I know my table is flowing to the next page or not so that I will write my logic based on it.
Thanks,
kc

Hello Dude,
Try to find out the field of the table is in which page. If it is in page 2 so u can print the amount there.
try this script
for(var i = 0 ; i < xfa.host.numPages ; i++) // loop uoto total number of pages
var oFields = xfa.layout.pageContent(i, "field");
totalfields   = oFields.length;                    // gives the number of fields in a page
   flag=1;
for (var nNodeCount = 0; nNodeCount < z; nNodeCount++) // loop through the fields
         if (oFields.item(nNodeCount).name == "find your table field")   // Here find for that field if it works print maount in that page
Good Luck
Regards,
RAkesh

Master page Dynamic data not getting displayed in consecutive pages

Hi,
   I have buit a dynamic form which has some dynamic content in master page and a dynamic table in the body page.
Layout is
Master page
      Sub form
             Field1 -TextView
             Field2 - TextField      bind with Node1--->Attribute1
             Field2- TextField       bind with Node2---->Attribute2
            Field n - TextField
all the text fields are bound to various nodes from RFC
Body Page
         Sub form
              Table -Grows Dynamically
When i run the application all the fields are displayed perfectly in the first page.
when the table data goes more than one page the problem arises
The Text fields in the master page is not displaying the values in the second page ,but the text views and the table values are fine.
The values are getting displayed in both pages if i put any attribute inside the parent node.Is there any property i need to set at node level or subform level?
Thanks in advance,
Siva

Hi
I Would like to give a suggestion eventhough i don,t have answer to you question.
Master Page is used for static content as per SAP and Adobe like company logo and company address footer section and placing watermarks etc....
I feel because of the Dynamic behavior in master page it Leeds this problem.
Regards
Malli

Items are not flowing into the second master page.

Hello,
any help on this is really appreciated. this is the situation. There are two master pages. I have created a flow content subform. And within this, i have created a position content subform. Within this, i have the different fields of an item level table. There are a total of 14 records. three pages are used. And all the three are the first master page. The second master page is not being used. I have tried many ways, but could not suceed. Could any one out there suggest a way to solve this problem?

Hello,
I'm facing a problem here. Within my print form I have one master page.
Basically I have a dynamic table which must be followed by a standard text.
So I've created a subform (flow content), in it I have another subform (flow content, table): in it one subform (flow content, table row) and a subform (position content with my text).
Although all the 'allow page breaks' are checked, the issue I have is that the second page is never printed...

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!

Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped

Master Detail module returns to Master page after Detail record saved

Using Oracle Designer Editor version 10.1.2.0.2 I have generated a Web PL/SQL package
set up as a Master/Detail where the Master and Detail records appear in separate windows.
The Master window contains multi-records each with a link to the related Detail records.
The user clicks on the Detail link and the window that appears will allow the user to insert
a new Detail record. Once the user clicks the Save button I need the Detail window to disappear
and the focus returned to the Master records preferably after a new query is performed.
What are the steps I need to perform to navigate back to the Master page and close the Detail
page?
Thanks,
Mark

The simple answer is that to do exactly what you want would take some fundamental changes to the way the framework works. The actionInsert procedure does what it does - it saves the changes and redisplays the form. You can do post-generation changes to make it do something else, like return to the Master, but I'd advise against it.
But if you want a way to return to the Master window, where the user clicks a button or link on the detail form after saving changes, that we can do. Just make a note of the URL that does the initial display of the Master page - probably my_module_name$.startup. Go into the detail module component, and click the User Text tab. Then at Text Location, "Bottom of View Form" (or Top if you want the link there) add for a link:
htf.anchor('my_module_name$.startup','Return to Master')Or for a button:
htf.formOpen('my_module_name$.startup','GET')||htf.formsubmit('Return to Master')||htf.formCloseYou may need to set the SECECS preference for this module to "No" to get this to work.
An alternative to my method is to define an Action Item in the module that does a navigation. I often am linking directly to the View form for a master table, rather than a record list, as you are, and Action Items don't work well for that, but one might work fine for you.

How to: Print table on first page, use second page (back) for text only

Hi, I am looking for a clear document on how to use pagination and the Odd and Even pages.
We need to print a table over several pages, but only on Odd pages.
On the back of each page we need to print "Terms and Conditions". Is that possible? Can it be done without scripting
We are on ADOBE version 8.1
In the file properties, double sided is switched on, and version set to 8.1 and higher.
I created two Master pages, a FrontPage with ContentArea1and a BackPage with ContentArea2.
FrontPage is used for uneven pages, BackPage is used for the even pages. The masterpages are printed correctly (alternating properly).
Two pages were created for the content area's:
ITEMS: contains item data (table with header and footer). Place is "On Odd Page". After "Goto page BackPage". And if the table needs to be paginated it goes to BackPage with overflow leader "Conditions".
CONDITIONS: contains a textfield (Terms and Conditions). Place is "On Even Page". After "Goto page FrontPage". No overflow.
What should happen is that on the front pages the item table is printed. If there are too many lines it should overflow to page number 3 then 5 etc. All the even pages should display the text.
What actually happens is that the item table also gets printed in the content area for the Condition text...
Also the "Conditions" are not printed on the last back page. But only once before it...
Cheers,
Edwin.

Fixed it... After a lot of creating, deleting, playing around with pagination and the inevitable cursing...
I have created 5 pages:
1. FirstPage
     - Odd/Even: Odd (Front) Pages
     - Placement: First page (In page set)
2. FrontPage (For Odd pages)
     - Odd/Even: Odd/Front Pages
     - Placement: Rest of Pages
3. BackPage (For Even pages)
     - Odd/Even: Even (Back) Pages
     - Placement: Rest of Pages
4. LastPage
     - Odd/Even: No Odd/Even Restrictions
     - Placement: Last page (In page set)
5. DummyPage
     - Odd/Even: Blank pages
The 'Terms and conditions' are located on the BackPage and LastPage (as a text).
The table that is printed is (of course) located on a normal page (flowed subform).
Pagination tab: Placement = Following previous, and After = "Continue filling parent". No overflow... Basically, it's all default.
The table lines will now start on the first page and if there are more lines than can be printed on this page, it will continue in the next content area. That will be on the FrontPage.
The trick is that each master page must have a content area (mandatory). Except for Blank pages, but these cannot be used... Blank pages would only be used once, after the first page.
What I discovered is that you can drag a content area away from the Master page and attach it to a different master page.
Logically, if there is no content area on a page, then data cannot be printed there. So, I created a Dummypage. On this page I dumped the content areas from the LastPage and the BackPage. As a result, content cannot be printed anymore on the back of pages. Only the standard text (a text field) is printed there. When the data from the table is overflowing, it will automatically overflow from the FirstPage to the next content area. Which is located on the FrontPages only.
The DummyPage is NOT used anywhere.
The result is that the records can only be printed on the content areas that exist on the First and Front pages. The back pages are now skipped.
Duplex printing is now working correctly, and the text is printed on the back of all the pages.
Cheers,
Edwin.

Can I specify more than one para tag for master page mapping?

Hi,
I want to map the same master page to be used by four different tags. Must I create a new row in the mapping table for each or can I separate the tag names by a comma and a space, for example, "Body, Bullet, Heading1, Note"?
I tried the latter and expected it to work, but it did not.
Thanks,
Sean

> ... create a new row in the mapping table for each ...
That works, and has no side effects that I've seen.
It appears, by the way, that FM applies the MP based on the first para tag found that has a MasterPageMaps table entry, so multiple matches per page, even conflicting, are not a problem, as long as getting the MP for first-found is OK with you.

How to reduce the weight of SharePoint master page.

Hi
I have given my sharePoint master page (without any additional content) & source-generated in browser.
we want to reduce the weight of the page(source)
can anyone tell me what are the things from the below-master page I can remove.
our master page is for simple static html pages (so no need of view state etc.)
mailny there are lot of js links. can we reduce this. if so what link we can remove?
and Iam getting viewstate also(is this for ribbon?)
==================Eg. We want to remove ==================================
<input type="hidden" name="__VIEWSTATE" id="__VIEWSTATE" value="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"
/>
<script type="text/javascript" src="/_layouts/15/init.debug.js?rev=Hj977U2n5ZIN5oS6ATVanQ%3D%3D"></script>
<script type="text/javascript" src="/ScriptResource.axd?d=HCvGktx1A8A1lPZ_uUB9cGFlYk3HE_mWfN2BaMhCiXhEC0xNyXeG83EOG9vsM4AmfPSa5taspY6EXh9PxbHLYzWtkcG86D_c9EC6SLdKd37Gu3SyyGjJCi_sI2xSqbDH3NIT9xXdebl4q-d4eNVUlwffzNurI4I_1RnznQoxjFJX02JqTYb-le9qw53raxgq0&t=6119e399"></script>
<script type="text/javascript" src="/_layouts/15/blank.js?rev=ZaOXZEobVwykPO9g8hq%2F8A%3D%3D"></script>
<script type="text/javascript" src="/ScriptResource.axd?d=b-pFE2MM677quNb0_5VStXi9opok7kYtAYU_KkApt4G5-TnDhtoCVwrUmOen_-CqUIisaQf36RheGO3mh0InVT5q6WDz0yEh2SpgFy4NS-3ks2YPydbrpbaHUUQOeZBvxZkIDclTh0KezpCLIOKGHGtP1WozsMT5yy77vMh0mvBgk_sgs01gInqNy4LwGjXz_IiAvU7rcFTwLtwaokhh3A2&t=6119e399"></script>
<script type="text/javascript">RegisterSod("initstrings.js", "\u002f_layouts\u002f15\u002f1033\u002finitstrings.debug.js?rev=I1g8M0L6SHEhFP0dpcdMAg\u00253D\u00253D");</script>
<script type="text/javascript">RegisterSod("strings.js", "\u002f_layouts\u002f15\u002f1033\u002fstrings.debug.js?rev=Iggk2Q7N9CL63RKBTScOLg\u00253D\u00253D"); RegisterSodDep("strings.js", "initstrings.js");</script>
<script type="text/javascript">RegisterSod("sp.init.js", "\u002f_layouts\u002f15\u002fsp.init.debug.js?rev=K\u00252BPANXVo5GtElzSq70zhSw\u00253D\u00253D");</script>
<script type="text/javascript">RegisterSod("sp.res.resx", "\u002f_layouts\u002f15\u002fScriptResx.ashx?culture=en\u00252Dus\u0026name=SP\u00252ERes\u0026rev=yNk\u00252FhRzgBn40LJVP\u00252BqfgdQ\u00253D\u00253D");</script>
<script type="text/javascript">RegisterSod("sp.ui.dialog.js", "\u002f_layouts\u002f15\u002fsp.ui.dialog.debug.js?rev=EmVQKmKF\u00252BmjLtrcRjI3zww\u00253D\u00253D"); RegisterSodDep("sp.ui.dialog.js", "sp.init.js");
RegisterSodDep("sp.ui.dialog.js", "sp.res.resx");</script>
<script type="text/javascript">RegisterSod("core.js", "\u002f_layouts\u002f15\u002fcore.debug.js?rev=HMlx90NziE60dQZ6I9yj2Q\u00253D\u00253D"); RegisterSodDep("core.js", "strings.js");</script>
<script type="text/javascript">RegisterSod("menu.js", "\u002f_layouts\u002f15\u002fmenu.debug.js?rev=bxANkB9\u00252Fa1ztnGu\u00252FWXYvaw\u00253D\u00253D");</script>
<script type="text/javascript">RegisterSod("mQuery.js", "\u002f_layouts\u002f15\u002fmquery.debug.js?rev=eg22Wtb4UOCtZAR\u00252BS9foWQ\u00253D\u00253D");</script>
<script type="text/javascript">RegisterSod("callout.js", "\u002f_layouts\u002f15\u002fcallout.debug.js?rev=IF6FsxpN89rIqqbAN4WzEA\u00253D\u00253D"); RegisterSodDep("callout.js", "strings.js"); RegisterSodDep("callout.js",
"mQuery.js"); RegisterSodDep("callout.js", "core.js");</script>
<script type="text/javascript">RegisterSod("clienttemplates.js", "\u002f_layouts\u002f15\u002fclienttemplates.debug.js?rev=lLXTuIkEXZ6o9j8Ab8CDAQ\u00253D\u00253D"); RegisterSodDep("clienttemplates.js", "initstrings.js");</script>
<script type="text/javascript">RegisterSod("sharing.js", "\u002f_layouts\u002f15\u002fsharing.debug.js?rev=i3xiltVGmH60p2cMnA\u00252Fqkw\u00253D\u00253D"); RegisterSodDep("sharing.js", "strings.js"); RegisterSodDep("sharing.js",
"mQuery.js"); RegisterSodDep("sharing.js", "clienttemplates.js"); RegisterSodDep("sharing.js", "core.js");</script>
<script type="text/javascript">RegisterSod("suitelinks.js", "\u002f_layouts\u002f15\u002fsuitelinks.debug.js?rev=vvrDF6GGwC8iHM1ukVFXjw\u00253D\u00253D"); RegisterSodDep("suitelinks.js", "strings.js");
RegisterSodDep("suitelinks.js", "core.js");</script>
<script type="text/javascript">RegisterSod("sp.runtime.js", "\u002f_layouts\u002f15\u002fsp.runtime.debug.js?rev=VFkBZgkYpbAZS6abSrBqIg\u00253D\u00253D"); RegisterSodDep("sp.runtime.js", "sp.res.resx");</script>
<script type="text/javascript">RegisterSod("sp.js", "\u002f_layouts\u002f15\u002fsp.debug.js?rev=IR\u00252FvhMqBTNIUqECkE3HAZw\u00253D\u00253D"); RegisterSodDep("sp.js", "sp.runtime.js"); RegisterSodDep("sp.js",
"sp.ui.dialog.js"); RegisterSodDep("sp.js", "sp.res.resx");</script>
<script type="text/javascript">RegisterSod("userprofile", "\u002f_layouts\u002f15\u002fsp.userprofiles.debug.js?rev=SFEKakO2PFSjG0qOjeB4Fw\u00253D\u00253D"); RegisterSodDep("userprofile", "sp.runtime.js");</script>
<script type="text/javascript">RegisterSod("followingcommon.js", "\u002f_layouts\u002f15\u002ffollowingcommon.debug.js?rev=QlAqfMuxiHOMCoHCTvpncg\u00253D\u00253D"); RegisterSodDep("followingcommon.js", "strings.js");
RegisterSodDep("followingcommon.js", "sp.js"); RegisterSodDep("followingcommon.js", "userprofile"); RegisterSodDep("followingcommon.js", "core.js"); RegisterSodDep("followingcommon.js",
"mQuery.js");</script>
<script type="text/javascript">RegisterSod("profilebrowserscriptres.resx", "\u002f_layouts\u002f15\u002fScriptResx.ashx?culture=en\u00252Dus\u0026name=ProfileBrowserScriptRes\u0026rev=PEn82Mp1iMY2FYDo2ApuAQ\u00253D\u00253D");</script>
<script type="text/javascript">RegisterSod("sp.ui.mysitecommon.js", "\u002f_layouts\u002f15\u002fsp.ui.mysitecommon.debug.js?rev=Cbv5CFidFecFvehmi\u00252BlK\u00252Bg\u00253D\u00253D"); RegisterSodDep("sp.ui.mysitecommon.js",
"sp.init.js"); RegisterSodDep("sp.ui.mysitecommon.js", "sp.runtime.js"); RegisterSodDep("sp.ui.mysitecommon.js", "userprofile"); RegisterSodDep("sp.ui.mysitecommon.js", "profilebrowserscriptres.resx");</script>
<script type="text/javascript">RegisterSod("browserScript", "\u002f_layouts\u002f15\u002fie55up.debug.js?rev=pVBnO13dp7gFq\u00252FZalDmroA\u00253D\u00253D"); RegisterSodDep("browserScript", "strings.js");</script>
<script type="text/javascript">RegisterSod("inplview", "\u002f_layouts\u002f15\u002finplview.debug.js?rev=1gK1dBB5qS2N78GzeDqwjA\u00253D\u00253D"); RegisterSodDep("inplview", "strings.js"); RegisterSodDep("inplview",
"core.js"); RegisterSodDep("inplview", "sp.js");</script>
<script type="text/javascript">RegisterSod("offline.js", "\u002f_layouts\u002f15\u002foffline.debug.js?rev=kGGV\u00252F1CHiLpCkfHyY3G5ZA\u00253D\u00253D");</script>
<script type="text/javascript">RegisterSod("sp.core.js", "\u002f_layouts\u002f15\u002fsp.core.debug.js?rev=GMkzPiQMx626LcptMQNo7g\u00253D\u00253D"); RegisterSodDep("sp.core.js", "strings.js"); RegisterSodDep("sp.core.js",
"sp.init.js"); RegisterSodDep("sp.core.js", "core.js");</script>
<script type="text/javascript">RegisterSod("cui.js", "\u002f_layouts\u002f15\u002fcui.debug.js?rev=l3Pt78EOb2DRXM4xdwfiIA\u00253D\u00253D");</script>
<script type="text/javascript">RegisterSod("ribbon", "\u002f_layouts\u002f15\u002fsp.ribbon.debug.js?rev=UX8Ji7oewSCpI\u00252BHzzUQQqA\u00253D\u00253D"); RegisterSodDep("ribbon", "strings.js"); RegisterSodDep("ribbon",
"core.js"); RegisterSodDep("ribbon", "sp.core.js"); RegisterSodDep("ribbon", "sp.js"); RegisterSodDep("ribbon", "cui.js"); RegisterSodDep("ribbon", "sp.res.resx"); RegisterSodDep("ribbon",
"sp.runtime.js"); RegisterSodDep("ribbon", "inplview");</script>
<script type="text/javascript">RegisterSod("WPAdderClass", "\u002f_layouts\u002f15\u002fwpadder.debug.js?rev=02m3ocMoqeXw1OPHrzEAYw\u00253D\u00253D");</script>
<link type="text/xml" rel="alternate" href="/sites/firstbank/_vti_bin/spsdisco.aspx" />
-==============================master page=====================================
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE html[]>
<html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882">
<head>
<meta http-equiv="X-UA-Compatible" content="IE=10" />






<meta name="GENERATOR" content="Microsoft SharePoint" />
<meta http-equiv="Content-type" content="text/html; charset=utf-8" />
<meta http-equiv="Expires" content="0" />







firstbank








<link rel="stylesheet" type="text/css" href="assets/css/corev15V1.css" />








<script type="text/javascript" src="http://win-6q11jqp4kh5:1111/_layouts/15/init.js?rev=zwpf9CD1m7am6imImmQglQ%3D%3D">//<![CDATA[//]]></script><script
type="text/javascript">
//<![CDATA[RegisterSod("initstrings.js",
"\u002f_layouts\u002f15\u002f1033\u002finitstrings.js?rev=uNmvBiHdrBzcPQzXRpm\u00252FnQ\u00253D\u00253D");//]]></script><script type="text/javascript">
//<![CDATA[RegisterSod("strings.js", "\u002f_layouts\u002f15\u002f1033\u002fstrings.js?rev=cSu1pcWiRc999fyCNzJplg\u00253D\u00253D");RegisterSodDep("strings.js",
"initstrings.js");//]]></script><script type="text/javascript">
//<![CDATA[RegisterSod("sp.init.js", "\u002f_layouts\u002f15\u002fsp.init.js?rev=QI1yUCfCoUkadL93jNZLOg\u00253D\u00253D");//]]></script><script type="text/javascript">
//<![CDATA[RegisterSod("sp.res.resx",
"\u002f_layouts\u002f15\u002fScriptResx.ashx?culture=en\u00252Dus\u0026name=SP\u00252ERes\u0026rev=yNk\u00252FhRzgBn40LJVP\u00252BqfgdQ\u00253D\u00253D");//]]></script><script type="text/javascript">
//<![CDATA[RegisterSod("sp.ui.dialog.js",
"\u002f_layouts\u002f15\u002fsp.ui.dialog.js?rev=0xf6wCIW4E1pN83I9nSIJQ\u00253D\u00253D");RegisterSodDep("sp.ui.dialog.js", "sp.init.js");RegisterSodDep("sp.ui.dialog.js", "sp.res.resx");//]]></script><script
type="text/javascript">
//<![CDATA[RegisterSod("core.js",
"\u002f_layouts\u002f15\u002fcore.js?rev=\u00252FmcwmyWAFSbQRHlXU4BIBg\u00253D\u00253D");RegisterSodDep("core.js", "strings.js");//]]></script><script type="text/javascript">
//<![CDATA[RegisterSod("menu.js", "\u002f_layouts\u002f15\u002fmenu.js?rev=pcr83s11QGFA2kLt5rDQ1g\u00253D\u00253D");//]]></script><script
type="text/javascript">
//<![CDATA[RegisterSod("mQuery.js",
"\u002f_layouts\u002f15\u002fmquery.js?rev=VYAJYBo5H8I3gVSL3MzD6A\u00253D\u00253D");//]]></script><script type="text/javascript">
//<![CDATA[RegisterSod("callout.js", "\u002f_layouts\u002f15\u002fcallout.js?rev=ryx2n4ePkYj1\u00252FALmcsXZfA\u00253D\u00253D");RegisterSodDep("callout.js",
"strings.js");RegisterSodDep("callout.js", "mQuery.js");RegisterSodDep("callout.js", "core.js");//]]></script><script type="text/javascript">
//<![CDATA[RegisterSod("clienttemplates.js", "\u002f_layouts\u002f15\u002fclienttemplates.js?rev=vtrc0n3sjgxKB4WQrCEeaA\u00253D\u00253D");RegisterSodDep("clienttemplates.js",
"initstrings.js");//]]></script><script type="text/javascript">
//<![CDATA[RegisterSod("sharing.js", "\u002f_layouts\u002f15\u002fsharing.js?rev=EojJW\u00252FD7vytDfjPyrFWfzw\u00253D\u00253D");RegisterSodDep("sharing.js", "strings.js");RegisterSodDep("sharing.js",
"mQuery.js");RegisterSodDep("sharing.js", "clienttemplates.js");RegisterSodDep("sharing.js", "core.js");//]]></script><script type="text/javascript">
//<![CDATA[RegisterSod("suitelinks.js", "\u002f_layouts\u002f15\u002fsuitelinks.js?rev=LW8KECQqnuLhetUeLd3iSg\u00253D\u00253D");RegisterSodDep("suitelinks.js",
"strings.js");RegisterSodDep("suitelinks.js", "core.js");//]]></script>

















<link type="text/xml" rel="alternate" href="http://win-6q11jqp4kh5:1111/sites/firstbank/_vti_bin/spsdisco.aspx" />







[ MyLinksRibbon "ctl79" ][ SpellCheckV4Action "ctl80" ][ PublishingInformationControl "ctl81" ][ RTEV4Action "ctl82" ][ ProjectPolicyStatusBar "ctl83" ][ InsertMediaRibbonButton "ctl84" ][ SeoBrowserTitle
"ctl85" ][ SeoCustomMeta "ctl86" ]<link rel="canonical" href="http://win-6q11jqp4kh5:1111/sites/firstbank/_catalogs/masterpage/FirstBankHtml.html" />[ SeoNoIndex "ctl88" ][ SeoKeywords "ctl89"
][ SeoMetaDescription "ctl90" ][ SiteStatusBar "ctl91" ][ FollowingScriptControl "ctl92" ]






<link rel="stylesheet" type="text/css" href="assets/css/corev15V1.css" />




<table cellpadding="4" cellspacing="0" style="font:messagebox;color:buttontext;background-color:buttonface;border:
solid 1px;border-top-color:buttonhighlight;border-left-color:buttonhighlight;border-bottom-color:buttonshadow;border-right-color:buttonshadow"><tr><td nowrap="nowrap"><span style="font-weight:bold">SPWebPartManager</span>
- Unnamed63</td></tr><tr><td></td></tr></table>




<meta charset="utf-8" />

<script src="/_layouts/15/SP.Runtime.js">//<![CDATA[
//]]>
</script>
<script src="/_layouts/15/SP.js">//<![CDATA[
//]]>
</script>
<meta name="viewport" content="width=device-width, initial-scale=1.0, maximum-scale=1.0, user-scalable=no" />

</head>
<body>



<div id="ms-designer-ribbon">

<div class="DefaultContentBlock" style="background:rgb(0, 114, 198); color:white; width:100%; padding:8px; height:64px; ">The SharePoint
ribbon will be here when your file is either previewed on or applied to your site.</div>
</div>

<div id="s4-workspace">
<div id="s4-bodyContainer">
<div data-name="ContentPlaceHolderMain">









</div>
</div>
</div>
</body>
</html>
S H A J A N

I am not sure if you can really disable something but try to use minimal master page. It will increase performance a lot.
http://www.themossblog.com/sharepoint-general/10-tips-to-improve-sharepoint-performance
http://www.chaitumadala.com/2012/01/how-to-tune-sharepoint-2010-server-for.html
http://sharepointroot.com/2008/12/07/improving-sharepoint-performance-publishing/
If this helped you resolve your issue, please mark it Answered
but our client dont want to change the masterpage. he want to remove content from his existing master page
S H A J A N

Table in Master Page

Similar Messages

Maybe you are looking for