Table of onetime customer in sales
Dear ABAPER's,
We can get data in KNA1 table of One Time Customer created through XD01.
THEN
While creating a sales order (for cash sales etc.,) a pop-up window comes where we can enter the walkin customers name and address who does only one transaction and goes off. Can you guide me in which table this information is stored.
i checked VBPA table, where i got (primary key VBELN) One time customers number, VAT number and SoldToAddr no (9000000185) but not the Name and address details.
please help
Thank you,
bye
Rajam
strange..
in FI it's Table bsec and vbsec....
is there a adrnr in table vbpa which leads us to adr.-table like adrc?
A.
Similar Messages
-
Wht r the standard tables for vendor customer and sales order report/
Hi wht r the standard tables for vendor and customer reports and is how in normal we cannot use them for vendor reporting and etc ?
Hi
Customer is related to Sales Module
So for a customer we fetch the reports of Sales orders , Deliveries and Billing doc's
CUstomer and Vendor related tables with important fields:
KNA1: Customer Master-General(KUNNR,NAME1,LAND1)
KNB1: Customer Master(Company Code)(KUNNR,BUKRS,PERNR)
KNC1: Customer Master Data (Transaction Figures)(KUNNR,BUKRS,GJAHR)
KNVK: Customer Master Contact Partner(PARNR,KUNNR,NAME1)
KNVV: Customer Master sales data(KUNNR,VKORG,VTWEG,KDGRP)
KNBK: Customer Bank Details(KUNNR,BANKS,BANKL,BANKN)
KNVH: Customer Hierarchy (HITYP,KUNNR,VKORG,VTWEG,SPART)
KNVP: Customer Master Partner Functions(KUNNR,PARVW,KUNN2)
KNVS: Customer Shipment data(KUNNR,VSTEL,TRANS)
KNVI: Customer Tax data(KUNNR,ALAND,TATYP)
LFA1: Vendor Master-General (LIFNR,NAME1,ORT01)
LFB1: Vendor Master(Company Code)(LIFNR,BUKRS,PERNR)
LFC1: Vendor Master (Transaction Figures)(LIFNR,BUKRS,GJAHR)
Sales related Tables for a customer
VBAK: Sales Document(Header Data) (VBELN, KUNNR)
VBAP: Sales Document(Item Data) (VBELN,POSNR,MATNR,ARKTX,CHARG)
Enquiry, Quotation, Sales Order are differentiated based on Doc.
Type(VBTYP field) in VBAK,VBAP Tables( for Enquiry VBTYP = A,
for Quotation 'B' & for Order it is 'C'.)
LIKP: Delivery Table (Header Data)(VBELN,LFART,KUNNR,WADAT,INCO1)
LIPS: Delivery Table (Item Data)(VBELN,POSNR,WERKS,LGORT,MATNR,VGBEL)
(LIPS-VGBEL = VBAK-VBELN, LIPS-VGPOS = VBAP-POSNR)
VTTK: Shipment Table (Header Data)(TKNUM)
VTTP: Shipment Table (Item Data)( TKNUM,TPNUM,VBELN)
(VTTP-VBELN = LIKP-VBELN)
VTFA: Shipping Document Flow(TKNUM,VBELV,VBELN)
VTPA: Shipping Partners data(VBELN,PARVW,KUNNR,PERNR)
VTTS: Stages in Shipment(TKNUM,TSNUM,TSTYP)
VTSP: Transport Stage/Shipment Item Allocation(TKNUM,TSNUM,TPNUM)
VEKP: Handling Unit: Header(Packing)(VENUM,VSTEL)
VEPO: Handling Unit: Item (Packing)(VENUM,VEPOS,VBELN)
VBRK: Billing Table(Header Data)(VBELN,FKART,BELNR)
VBRP: Billing Table(Item Data)(VBELN,POSNR,FKIMG,NETWR,VGBEL,VGPOS)
(VBRP-AUBEL = VBAK-VBELN, VBRP-VGBEL = LIKP-VBELN)
Apart from these tables there are lot of other tables which starts with
V, but we use the following tables frequently.
VBUK: All Sales Documents status & Admn. Data(Header)(VBELN,VBTYP)
VBTYP= C(Sales Order) VBTYP=J(Delivery) VBTYP=M(Invoice)
VBUP: Sales Documents status & Admn. Data(Item)(VBELN,POSNR)
VBEP: Sales Doc. Schedule Lines Data(VBELN,POSNR,EDATU,WMENG)
VBKD: To get sales related Business data like Payment terms etc.(VBELN,ZTERM)
VBFA: sales document flow data(VBELV,VBELN,POSNV,VBTYP)
VBPA: Partner functions Data(VBELN,PARVW,KUNNR,LIFNR)
VEDA: Contract Data(VBELN,VPOSN)
VEDAPO: Contract Data(VBELN,VPOSN)
Vendor related MM tables
EBAN-- Pur.Reqn. Data (BANFN,BNFPO,BADAT,MATNR)
EBKN-- Purchase Requisition Account Assignment(BANFN,BNFPO,VBELN)
EINA- Purchase Info.Record (General Data)(INFNR,MATNR,LIFNR)
EINE-- Purchase Info.Record (Pur.Orgn Data )(INFNR,EKORG)
ELBK-- Vendor Evaluation Header Data(LIFNR,EKORG,KLASS)
EKKO-- Purchase Order Data (Header)(EBELN,BSTYP,BSART)
EKPO-- Purchase Order Data (Item)(EBELN,EBELP,MATNR)
RFQ and PO are differentiated by Doc Type(BSTYP)in EKKO table.
For RFQ it is A and for PO it is F.
MKPF-- GRN Data (Header) (EBELN,BLDAT,BUDAT,XBLNR,BKTXT)
MSEG-- GRN Data (Item)(MBLNR,BWART,LIFNR,MATNR,EBELN)
Apart from this there are lot of tables which begin with 'M'& 'E', but we
use the following very often.
EKBE--PO History Data (EBELN,EBELP,BELNR,BLDAT,MATNR,VGABE)
EKBZ--PO History with delivery Costs(EBELN,BELNR,LIFNR,XBLNR)
EKET--Schedule lines data of a PO (EBELN,EINDT,SLFDT)
EKES--Vendor Confirmations Data(EBELN,EBTYP,EINDT,XBLNR)
Reward points if useful
Regards
Anji -
SAP Tables for Open Customer Orders and Sales History
Dear Experts.
I am looking to get SAP SD related tables for the following,
1) SAP tables for Open Customer Orders
From SAP, I need to get all tables that Contain all open customer orders for products.
2) Sales History
From SAP, I need to get all tables that contain the previous month's sales history (shipped customer orders).
Please Help!!hi
check the following link
http://www.erpgenie.com/abap/tables_sd.htm
hope it will help you
regards,
sreelatha gullapalli -
How to create a sales order for Onetime customer with Tax code?
Hi everyone,
Can I use sd_salesdocument_create for a one-time customer? From the standard bapi, which field can I use for the Tax Code ?
pOints will be given.I have the same problem... should I use a different function module on this? if yes, what is it?
I need to create a sales order for one onetime customer with tax code... help me pls.... -
HOW TO CREATE A CUSTOMER NO (sales view)THAT STOERS IN KNVV TABLE
HI ,
how to create a customer no(sales view) that stores in tabel knvv, i able to create in kna1 table but not storing in knvv table, please provide with tcodeHi,
I believe while creating customer you must be maintaining sales area if you are not maintaing then only customer's genaral data will be created and only KNA1 table will be populating.
Rgds
San -
Report to fetch the text information from customer master sales data
Dear Experts,
We have come up with a requirement where the business want a report/list of the customers for whom a particular text is not maintained in customer master -sales data.
There are many Z text id are configured and are maintained in Sales data- extras- text. In addition, business also need some key fields from the customer master such as name, city, delv plant, payment terms, sales off, sales grp etc.
I could not get any standard table where the text is maintained with the customer numbers. Table STXH can give the customer numbers for a particular text id type but what is maintained against the given text id is not fetched from the table.
So we need the valuable inputs to realize the requirement.
As an proposal, we are aiming to develop custom Z report with the FM READ_TEXT to get the text information with the customer no ( object type KNVV and text id ). But for the additional information, what should be the actual logic for fetching the data. say if this FM is used, what should be the sequence of the logic and ideal selection parameters.
In addition, we aim to use BAPI BAPI_CUSTOMER_GETDETAIL2 to fetch some of the customer ifnormation but many fields are not found in this . can we use some other bapi which can provide the complete general/sales data of customer ( delv plant, sales off, sales grp, custo grp, incoterms, payment terms etc)
Kindly suggest accordingly.
Many thanks in advance.Hi Dharmendra Kumar,
I guess the best would be to check in ABAP General forum on the READ_TEXT sequence/ logic etc..
For customer details, the available BAPIs are:
BAPI_CUSTOMER_GETDETAIL
BAPI_CUSTOMER_GETDETAIL1
BAPI_CUSTOMER_GETDETAIL2
However, you might have to check classes in SE24 to find any existing classes and its method yo give you all the information of a customer. Also check this thread: [BAPI for customer details like in IDoc DEBMAS;
Regards,
Raghu. -
How to define ABC class field in the Customer Master Sales tab
HI All,
can any one let me know how to define the new ABC class in the Customer Master Sales tab like below.
u2013 A (> 6,000,000 )
u2013 B (> 1,000,000u20136,000,000 )
u2013 C (> 100,000u20132,000,000 )
u2013 D (< 100,000 )
can any one let me know how to define and path in IMG.
Thanks in advance.
kumar reddy.In my opinion, you don't have any such std table/view to update ABC Classification field. You might need to update relevant infostructure based on your requirement, such as sales, invoiced, etc..
Try with following, based on your requirement:
MC(A
SIS: Customer,Inc.Orders - Selection
MC+A
SIS: Customer Returns, Selection
MC+E
SIS: Customer, Sales - Selection
MC+I
SIS: Customer Credit Memos - Selec.
Regards
JP -
Customer Master - Sales text copy to Sales Document Header
Hello,
I have properly configured the text types, access sequences, and text procedures to take text from the Customer - Sales & Distribution and copy to the Sales Document Header. After testing this in my DEV system, everything is working appropriately.
I have transported these changes to my QA system, all transports went through successfully. All configuration is now the same between my DEV and QA systems, and the access sequences are recognized in both systems via the TTXERN table.
All changes were made using transaction VOTXN.
The problem is that when performing my test in QA, the text is not copied from the Customer Master - Sales Area text to the Sales Document Header text. When going to the Text Determination Analysis view, it states 111 - Access Sequence does not exist. When selecting Customizing, it clearly shows that the access sequences do exist.
Has anyone encountered this issue? I have checked SAP notes but have not found a proper resolution for this issue.
Edited by: Andy Slania on Jan 31, 2011 9:30 PMRead OSS Note 1002455 - Errors in texts: Messages VX 201, VX 111, and VX 205 and Note 1002664 - FAQ: Text determination problems after upgrade.
Also check OSS Note 581779 - Text determination analysis: Access sequence does not exist.
One more OSS Note 970153 - Change to Customizing text not transferred to target system may also apply to your scenario.
Regards, -
IDoc error "customer and sales area : GR could not be uniquely determined"
Hi All,
While posting some IDocs i am getting error customer and sales area : GR could not be uniquely determined even when entries are available in EDSDC table.
Please assist.Double check your entries. Once I ended up even sending a message to SAP and turned out there was a simple typo in the table.
Also since you're saying "some IDocs" - check how exactly they are different from those that don't have this error. -
Derivation of Sales Office, Customer gr, Sales gr and Sales district
Hi,
In the derivation, of Customer group, Sales Group, Sales Office and Sales District in Profitability Analysis, the standard derivation looks into the table KNVV. But how to pickup the derivation from the sales document where the user selects the values against the said characteristics. Kindly share whether it is possible to derive the said characteristics from billing document table and how. Any valuable inputs shall be highly appreciated.
Regards,Dear Ashok,
Pls. maintain the values in KEDR as below your purpose will be resolved since the below are the results of simulation.
Source Fields for Table look up :
Table Field Name Table Field Name
VBAK VBELN Sales Document = CO-PA KAUFN
Maintain the Target field as below and also assign the relavant fields from COPA.
VBAK VKBUR
KVGR1
VKGRP
Regards,
Omprakash -
Sales office authorization check in customer master,Sale order and billing
Hello Experts
We need to restrict authorization for customer master, sale order and billing based on sales office.
Can somebody guide me how to activate this ? Has anyone of you have successfully done that?
Regards
kumarlibHello Kumar,
User authorization is within Basis expertise, but if you want to get some feel for what authorization objects are take a look at trans SUIM. But basically how it works is for a given transaction the level of check is specified -- in this case Sales Office. Based on values stored in that field the user is allowed or not allowed transaction access.
So you determine whatever the needed matrix is for authorization restriction (i.e. user A can access Sales Office xxx, user B can access Sales Office yyy & so on). Also give Basis the transaction codes to restrict, along w/the technical table/field for each (like from customer master - KNVV-VKBUR, from sales doc level VBAK-VKBUR). Basis sets up the authorization object w/assignments to the users accordingly.
This is standard SAP & your Basis support should be familiar with it. Good luck. -
Can we enter data in any standard table directly through custom form??
Dear All,
Can we enter data in any standard table directly through custom form??
I have create custom form in R.12. I want to insert data in quality standard table directly through custom form. Need experts guideline.
Awaiting regards,Hi,
Can we enter data in any standard table directly through custom form??
I have create custom form in R.12. I want to insert data in quality standard table directly through custom form. Need experts guideline.
Awaiting regards,
I would not recommend touching the standard tables at all unless you are being guided by the SR. For a record to be in the standard table it should go through series of validations based on the what operation you are performing and some times datas are dependent upon the other tables, and also some times the same records are hit to so many other tables simultaneously.
Therefore I would not recommend this brother.
Thanks &
Best Regards, -
IN which table stores the Value of sales orders Net Value
IN which table stores the Value of sales orders Net Value
Hi Lakshmi,
Check Following Tables:
CRMD_PRICING_I
CRMM_PR_SALESA
CNCCRMPRSAP00090
Reward Points if Helpful.
Srini. -
Internal Error in reading a Table of Oracle custom-defined objects.
Hi,
We are running into an Oracle internal error when trying to extract data from an OUT parameter of a stored procedure. The OUT parameter is of the type TABLE of Oracle custom-defined OBJECT.
Any help on this issue will be greatly appreciated.
Thanks, in advance,
OraNew
Program:
package test;
import java.sql.CallableStatement;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Types;
import java.util.ArrayList;
import java.util.List;
import oracle.sql.ARRAY;
import oracle.sql.STRUCT;
import src.vo.ProfileBank;
public class TestOracle {
* @param args
public static void main(String[] args) {
try{
Connection con = getConnection();
ResultSet rsBalance = null;
CallableStatement cs =
con.prepareCall("{ CALL acr_profiles.get_profile_bank( ?, ?, ?)}");
cs.setLong(1, new Long(133).longValue());
cs.setLong(2, new Long(29032).longValue());
cs.registerOutParameter(3,Types.ARRAY,"ACR_USER." + "ACR_PROF_BANK_TAB");
cs.execute();
ARRAY array = (oracle.sql.ARRAY) cs.getObject(3);
System.out.println("length: "+ array.length());
System.out.println("isConvertible: " + array.isConvertibleTo(Object.class));
System.out.println("isInline: " + array.isInline());
rsBalance = array.getResultSet();
showResultSet(rsBalance);
} catch (Exception sql){
System.out.println("Exception "+ sql);
public static void showResultSet (ResultSet rs) throws SQLException
System.out.println("ResultSet = "+ rs.toString());
List profileBanks = new ArrayList();
while (rs != null && rs.next()) {
STRUCT struct = (STRUCT)rs.getObject (2); //getting the Internal Error on this line.
Object[] attribs = struct.getAttributes();
System.out.println("Bank Alias Id"+ (java.math.BigDecimal) attribs[0]);
System.out.println("Bank Name"+ (String)attribs[1]);
System.out.println("Bank set flag "+ (String) attribs[2]);
ProfileBank pBank = new ProfileBank();
pBank.setBankAliasId(new Integer(((java.math.BigDecimal) attribs[0]).intValue()));
pBank.setBankName((String) attribs[1]);
pBank.setSelBankFlag((String) attribs[2]);
profileBanks.add(pBank);
public static Connection getConnection() throws ClassNotFoundException, SQLException {
Class.forName("oracle.jdbc.driver.OracleDriver");
System.out.println("Driver loaded");
// establish a connection
Connection conn = DriverManager
.getConnection(
"jdbc:oracle:thin:@(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=10.3.11.201)(Port=1521)) (CONNECT_DATA=(SERVICE_NAME= aada.a.al)))",
"acr_user", "acr_user");
System.out.println("Database connected");
return conn;
Console Output:
Driver loaded
Database connected
length: 2
isConvertible: false
isInline: true
ResultSet = oracle.jdbc.driver.ArrayDataResultSet@1f3aa07
Exception java.sql.SQLException: Internal Error
Partial Stacktrace obtained from the Eclipse Debug window:
oracle.jdbc.driver.DatabaseError.throwSqlException(int) line: 292
oracle.jdbc.oracore.OracleTypeCOLLECTION.initCollElemTypeName() line: 1192
oracle.jdbc.oracore.OracleTypeCOLLECTION.getAttributeType(int) line: 1225
oracle.jdbc.oracore.OracleTypeADT(oracle.jdbc.oracore.OracleNamedType).getFullName(boolean) line: 119
oracle.jdbc.oracore.OracleTypeADT(oracle.jdbc.oracore.OracleNamedType).getFullName() line: 93
oracle.sql.StructDescriptor(oracle.sql.TypeDescriptor).initSQLName() line: 497
oracle.sql.StructDescriptor(oracle.sql.TypeDescriptor).getName() line: 392
oracle.sql.StructDescriptor.getClass(java.util.Map) line: 2003
oracle.sql.STRUCT.toJdbc(java.util.Map) line: 983
oracle.jdbc.driver.ArrayDataResultSet.getObject(int, java.util.Map) line: 1379
oracle.jdbc.driver.ArrayDataResultSet.getObject(int) line: 1198
test.TestOracle.showResultSet(java.sql.ResultSet) line: 53
test.TestOracle.main(java.lang.String[]) line: 38
Environment:
Database: Oracle 10g (10.2.0.3)
JDBC Drivers: version 10.2.0.3 (ojdbc14, orai18n)
Database Server: HP-UX
Client machine: Windows XP
<end of thread>hi Thom,
most error relating to table DOKTL are caused by misconfigured network card.
if this is a "home" system, install a loopback adapter from Microsoft and use IP address 127.0.0.1 and also check "hosts" file for inconsistency. do not use the IP adddress provided by your ISP as it may change. -
Datasource or Cube for GL wise customer wise sales report
Hi BI Masters,
I am using Bi. 7.0, there is requirement for Sales report i.e. 'GL wise customer wise Sales Report '. For this i am searching standard datasource or cube which can help to develop the desire report. i shall appreciate all of you if you can share your experience in this type of requirement.
With Best Regards & Thanks
Kamal Purohit
INDIAHi,
Check the following datasource in ECC in RSA5.
0FI_GL_10 General Ledger: Leading Ledger Balances
0FI_GL_11 General Ledger: Balances of Leading Ledger via Line Items
0FI_GL_12 General Ledger: Balances of Leading Ledger via Delta Queue
0FI_GL_2 General ledger: Transaction figures - Cost of sales ledger
0FI_GL_4 General Ledger: Line Items with Delta Extraction
0FI_GL_6 General Ledger Sales Figures via Delta Extraction
0FI_GL_7 General Ledger Cost of Sales Ledger via Delta Extraction
0FI_GL_8 General Ledger: Statistical Key Figures
0FI_TX_4 Taxes: Line Items by Means of Delta Extraction
Thanks
Reddy
Maybe you are looking for
-
K7T Turbo Limited Ed. and problems :(
Hallo I have MSI K7T Turbo Limited Edition mobo (on KT133A). Yesterday something strange happened. I was surfing the net and suddenly my PC rebooted. After reboot I saw that in BIOS test, BIOS didin't detect my hard drives connected to first controll
-
BAPI_ENTRYSHEET_CREATE with "No Multi Account Assignment" and above 99 item
Hiii Gurus, I am facing a problem. I have an ALV with fields Service NO. , Order No.. etc. Now i have to select all records or some from ALV to create Entrysheet. Now the problem is if i selected less then 99 items from My ALV of different Servi
-
Framebuffer not able to use my monitor's full resolution
My monitor supports up to 1440x900, and that's what I use with X. But the most framebuffer seems to support is 1024x768 (that's the most listed when I boot with the option vga=ask, and run vbetest). Is there anyway I can make framebuffer use the fu
-
Can't see any tumbnails, Can't create proxy.
Hello, I'm new into the FCS support and I do have a problem now with my FinalCutServer version 1.5.2 running on an Xserver with V-trak. First of all everything was running correctly but after some one did "propagate permissions" on my root harddrive
-
Calculate Hardware requirement.
Hi, Can any one please show me the procedure to calculate CPU and Memory requirement for oracle application 12i or 11i. It will be used by arround 20 users and all the module will be used. I have gone through the documentation, it says to calculate l