Table used in Material cost value

Hi,
In Material cost estimation Cost Components views are Material Cost, Material Overhead, Subcontracting Charges, Conversion Cost and Total Cost. Material Cost is calculated based on Material price, Bom Qty, value put in KP26 i.e, fixed and variable pirce with combination of Cost Center and Activity type and processing hours, Labout hours from Routing. Total Cost appears with the combination of Material Cost and Conversion Cost . This Total Cost appears in costing view tab of Material Master and CKIS table. which table stored in Material Cost value. Kindly need your suggestion.
Regards,
Anindita

Hi A Roy
The tables are KEKO and KEPH....
In KEKO you will find prod costimation no against the combination of Plant/Material
Against this Prod Cst Est no, you will find the cost break up in KEPH table
Regards
Ajay M

Similar Messages

  • Tables used for material ledger

    What are the standard tables used for material ledger

    Hi,
    All req. configuration i have defined in last thread...
    The following tables contain data that can appear in the material ledger documents:
    ·        MLHD      Material Ledger Document: Header
    ·        MLIT  Material Ledger Document: Items
    ·        MLPP      Material Ledger Document: Posting Periods and Quantities
    ·        MLPPF    Material Ledger Document: Field Groups (Posting Periods and Quantities)
    ·        MLCR      Material Ledger Document: Currencies and Values
    ·        MLCRF    Material Ledger Document: Field Groups (Currencies and Values)
    ·        MLCRP    Material Ledger Document: Price Change (Currencies, Prices)
    ·        MLMST    Material Ledger Document: Costing Run Header Data
    The following types of material ledger documents are available, differing by transaction type:
    ·        CL     Material Ledger Closing Entries
    ·        UP    Material Ledger Update
    ·        PC    Price Changes
    ·        ST     Single-Level Price Determination
    ·        MS    Multilevel Price Determination
    ·        RE    Material Ledger Data Repairs
    USE :
    Material ledger documents are data that is recorded during each business transaction that is relevant to valuation. You can archive documents for closed periods when they are no longer needed for material price determination or reporting purposes. Archiving the documents deletes them from the database.
    Regards,
    Priyanka.P
    PLS AWARD IF HELPFULL
    Edited by: Priyanka Paltanwale on Aug 7, 2008 9:34 AM

  • Purchase Rebate is adding to Material cost value field

    HI,
    When i execute purchase rebate scenario, that amount is adding to Material cost value field in COPA report. Kindly tell me what isthe problem and where is the link between this.
    Thanks
    KB

    In customizing the integration of other modules with COPA you have keep in mind the sign logic because it may be different for values coming from different modules.
    Example: In our system revenue-reducing sales conditions come to COPA with a negative sign. In postings that come directly from FI to COPA, a negative sign means earnings. So we cannot assign any Fi account for direct posting to COPA to the same value field as SD conditions, because the sign logic doesn't match. We have to use different value fields and then get the formulas right in creating COPA reports to get the correct result in COPA.
    I think your problem here is of the same kind: Rebates from purchase seem to come with the same sign as cost of goods sold AND go to the same value field, although one consitutes cost and the other a reduction in costs.
    I think you have to get your rebates to post to another value field. Are those rebates an MM-condition or do they go to COPA through an assignment of FI-account to a value field?
    Regards
    Nikolas

  • TABLE ENTRY FOR ACTIVITY COST/VALUE

    The activity value/cost whict we are maintaining in KP26; in which table the cost is upated?
    Ganesh

    Hi,
    You can use the T Code KSBT for the activities and cost centers used.
    Also you can go through the T-Code S_ALR_87013617, check whether it meets your requirment.
    Also go throguth the Information System for Cost Center Accounting, there you may find helpful reports for your purpose.
    You can go through the structure RKPLN.
    Hope that helps.
    Regards,
    Rohit.
    Edited by: Rohit Chauhan on May 26, 2009 12:00 PM

  • What SAP table houses the Material Classification values?

    I cannot for the life of me figure out what SAP table actually stores the material classification characteristic values. These are the related tables I have found so far but none of them link the information to a material number:
    TABLE: CABN
    ATINN (characteristic ID)
    ATNAM (characteristic name code)
    MSEHI (UoM associated with characteristic)
    TABLE: CABNT
    ATINN (characteristic ID)
    ATBEZ (characteristic full name)
    TABLE: KLAH
    KLART (class type)
    CLASS (class name code)
    CLINT (class id)
    TABLE: KLAT
    CLINT (class id)
    TXTBZ (class full name)
    TABLE: KSML
    CLINT (class id)
    IMERK (characteristic id)
    POSNR (characteristic positional location for class)
    TABLE: CAWN
    ATINN (internal char.)
    ATZHL (int counter)
    ATWRT (char. value)
    TABLE: CAWNT
    ATINN (internal char.)
    ATZHL (int counter)
    ATWTB (description)
    I have also identified these structures, but I am no good at finding where values from a structure actually reside.
    STRUCT: RMCBC "I/O field for include screens from classification"
    contains MATNR, KLART, CLASS, KLTXT, ATWRT
    STRUCT: RMCLF "Classification I/O structure for Assgmt of Object to Class"
    contains KLART, CLASS, KLTXT
    Can anyone please help me and advise where the actual relationship between material number and classification information is? I'm trying to import this information from MDM to R/3 but I have no idea what to map it to or what Idoc segment to use.
    Thanks!

    Have a go with below table joint in SQVI or SQ01:
    KSSK (Allocation Table: Object to Class), joint together with KLAH (Class Header Data).
    Link will be field CLINT.
    Choose the below from KSSK:
    Key of object to be classified - KSSK-OBJEK: you will enter the material number here. Watch out - you have to add 10 leading zeros before your material number, eg. number 40524281 will be altered to 000000000040524281.
    Class Type - KSSK-KLART: here you can specify the class type which is 001 for material master.
    Choose the below from KLAH:
    Class number - KLAH-CLASS: this field will return the class number you assigned to your material in Classification view.
    HTH,
    Laszlo

  • Table for finding material cost in group currency

    Hi ,
    We are maintaing product cost on Cocode currency and group currency using CK11. We are not able to find the cost in group currecy in MEBW or KEPH.
    Kindly let me know the right table to look into.
    Thanks,
    Jatin

    Hi Jatin
    Did you mean you have cost component split in controlling area currency? if yes, then you will get for each costing calculation two records in table KEPH, the currency label is field LOSFX. The record with blank LOSFX is company code currency, the one with "X" is controlling area currency.
    Hope this helps.
    Junqi

  • Assign direct material cost to value field in copa while issue to Prod orde

    Dear All,
    My requirement is like this:
    There are some 16 material groups from A to P each containing some materials(finished goods).
    I want to allocate overhead to different material groups(Charecteristic in copa) in COPA using the periodic assesment cycles. I am able to allocate overhead(admin & sales cost) to different value fields in copa from different cost centers.
    I want to analyse the product cost and also the profitability of each material group in COPA using Report painter. Iam able to pull all the costs which i assign to value fields using assessment. But, i am NOT able to get the direct material cost which is issued to production orders using BOM.
    My question is whether we can assign the direct material cost to any user defined value field(material cost value field) while the material is being issued to production orders. Is there any automated way where we can directly assign the direct material cost to value field in copa while issuing the material to Production orders.
    Pls explain me whether we can do it. if yes how?
    Thank you very much in advance.
    Regards,
    Vishnu
    VST-IT.

    PA is a Profitability analysis tool. That means it gets updated when a sale is made, not before. (Except for settlements and assessment of overheads.)
    Goods issues for production gets updated in CO-PC, and needs to be analysed there. If you don't, you loose all the inbuilt tools for variance analysis, cost estimate comparisons, Wip Calculation etc. To the best of my knowledge, a Profitability Segment cannot be used as a cost object in Production Planning, because amongst others, you need to be able to capitalise the produced materials to stock at the end of the production run, or to WIP at the end of the Financial period,which is not possible with PS.
    Similarly, overheads are recorded in CCA and needs to be analysed there.
    If one goes against these big groupings in SAP, you always run into problems.

  • Error in quantity translation in CO-PA valuation using material costing

    Dear SAP Gurus,
    While releasing the billing document to accounting I am getting the following error:
    Error in quantity translation in CO-PA valuation using material costing
    Message no. K/821
    Diagnosis
    In Profitability Analysis (CO-PA), the system tried to use a material cost estimate to translate the unit KG for the material KG into the base unit of measure EA for that material.
    The system could not do this.
    System Response
    The document cannot be processed further.
    Procedure
    Check the quantity entered in the affected CO-PA quantity field &V4 .
    If necessary, change the material master to allow the unit KG as an alternative unit for the material 970000000000000016.
    Can anyone provide me with a solution to the said problem.
    Regards
    Nikit

    Hi Piet,
    That does not seem to be the solution as i cant define for all the materials how many units EA = how many kgs. Thanks for the reply anyway

  • Raw material cost estimates

    HI experts,
    Currently we have the following scenario:
    There are some raw materials which are procured externally, and these materials are maintained with price control S
    Well, the problem is that the standard cost for the material consists of a few more components, for example:
    The standard price for the material X is 20 USD which consists of:
    - the price of the material itself : 15 USD
    - the import duty : 5 USD
    let's say if the actual import duty happened during IR is 6 USD, how can we get the variance from the difference between the import duty? I am unfamiliar with raw material cost estimate, but seeing that the import duty will be captured using condition type in PO, i assumed that we can use raw material cost estimates with this, and use the COPA report with record type B for this case.
    Could anyone give any suggestions regarding this case? It is better if it comes with step to step guide.
    Thank you very much in advance
    Regards,
    Erwin

    Hi Erwin
    1. The ideal design would have been Price Control V if the material is outright purchased... There by not leaving any scope for variances... You would agree that it is best to valuate inventory @ actuals as far as possible
    2. If you want to retain S, then release your Std cost as many times as the Base Price of 15 or Import duty of 5 usd changes... This will also avoid variances during MIGO.. However, it will throw up inventory revaluation figure each time u release new cost estimate
    Else, the variances will be updated to CO or COPA as per your choice in OKB9.... The record type will be B
    Are you not able to update variance to COPA?
    br, Ajay M

  • Material Attribute value display based on cost center value

    Hi,
    Is it possible to display the material attribute value based on cost center value. I mean for some cost centers I would like to display the value of other characteristic in place of material attribute. I am trying to create a query on MP.
    Any info in this regard will be appreciated.
    Thank you.
    Harshan

    Hi Adi,
    In Rows, Create a struture. Using New Selection, You can restrict the New Value to the cost center (Restrict again on those some cost centers) and material. And for this New Characteristic, you can have a attribute.

  • Valuation using material cost estimate

    Ciao a tutti,
    We have create a material cost
    estimate without standard structure(unit costing) not FOR ALL MATERIALS, but only for ONE
    VARIANT of generic material (retail solution) (because the other variant have the same price, and because we have to reproduced 5000 BOM in unit cost for just
    one variant with transaction KKPA LSMW)
    So, now we have to valuated the material cost estimate when the customer create the billing document and put the split of the cost estimate in co-pa
    Our prolem is : we have calculate standard cost estimate for 5000
    variant not for all variant (because our customer crete the BOM in unit
    costing with transaction KKPA and LSMW, and they refuced the idea to
    calculate 30000 cost estimate with lsmw) so when we crete a billing
    document with a variant that haven't cost estimate created the system doesn't
    valuated the cost estimate (the system works well), but how I can change the variant in the valuation and put the variant that have the cost
    estimate calculate?
    Wiht the transaction "Assign Costing Keys to Any Characteristics" I think
    is not possible.
    I must to use enhance COPA0002?
    Thank you very much
    Paolo Artini
    tel: +393299223804

    Hi All,
    I am also facing the problem for Sales Order Cost Estimate. and the Costing Status is VO(Marked without errors).
    I have done the following
    created the Costing Key (sales order cost estimate)
    assigned costing key to the material type.
    assigned to the respective value fields
    sales order cost estimate,
    Run the RA
    Settlement done.
    But in COPA, cost estimates are not being split up based on the cost component (like Material, Labour and Over head) and it is getting posted to COGS only.
    Do we need to change the costing status to FR, if yes, but how to do ?
    Regards
    Ramesh KR
    +91 9884020411

  • Different Cost values for full table scans

    I have a very simple query that I run in two environments (Prod (20 CPU) and Dev (12 CPU)). Both environemtns are HPUX, oracle 9i.
    The query looks like this:
    SELECT prd70.jde_item_n
    FROM gdw.vjda_gdwprd68_bom_cmpnt prd68
    ,gdw.vjda_gdwprd70_gallo_item prd70
    WHERE prd70.jde_item_n = prd68.parnt_jde_item_n
    AND prd68.last_eff_t+nvl(to_number(prd70.auto_hld_dy_n),0)>= trunc(sysdate)
    GROUP BY prd70.jde_item_n
    When I look at the explain plans, there is a significant difference in cost and I can't figure out why they would be different. Both queries do full table scans, both instances have about the same number of rows, statistics on both are fresh.
    Production Plan:
    0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=18398 Card=14657 B
    ytes=249169)
    1 0 SORT (GROUP BY) (Cost=18398 Card=14657 Bytes=249169)
    2 1 HASH JOIN (Cost=18304 Card=14657 Bytes=249169)
    3 2 TABLE ACCESS (FULL) OF 'GDWPRD70_GALLO_ITEM' (Cost=949
    4 Card=194733 Bytes=1168398)
    4 2 TABLE ACCESS (FULL) OF 'GDWPRD68_BOM_CMPNT' (Cost=5887
    Card=293149 Bytes=3224639)
    Development plan:
    0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=3566 Card=14754 B
    ytes=259214)
    1 0 HASH GROUP BY (GROUP BY) (Cost=3566 Card=14754 Bytes=259214)
    2 1 HASH JOIN (Cost=3558 Card=14754 Bytes=259214)
    3 2 TABLE ACCESS (FULL) OF 'GDWPRD70_GALLO_ITEM' (Cost=1914
    4 Card=193655 Bytes=1323598)
    4 2 TABLE ACCESS (FULL) OF 'GDWPRD68_BOM_CMPNT' (Cost=1076
    Card=295075 Bytes=3169542)
    There seems to be no reason for the costs to be so different, but I'm hoping that someone will be able to lead me in the right direction.
    Thanks,
    Jdelao

    This link may help:
    http://jaffardba.blogspot.com/2007/07/change-behavior-of-group-by-clause-in.html
    But looking at the explain plans one of them uses a SORT (GROUP BY) (higher cost query) and the other uses a HASH GROUP BY (GROUP BY) (lower cost query). From my searches on the `Net the HASH GROUP BY is a more efficient algorithm than the SORT (GROUP BY) which would lead me to believe that this is one of the reasons why the cost values are so different. I can't find which version HASH GROUP BY came in but quick searches indicate 10g for some reason.
    Are your optimizer features parameter set to the same value? In general you could compare relevant parameters to see if there is a difference.
    Hope this helps!

  • Excise Value to Upload in Material Cost.

    Hi Guru's
    Our requirement is to add all the excise value to material cost. For that we have created new pricing procedure and it works ok as far as basic and education cess loading into material but this does not work for Higher Education Cess. Apart from loading into material cost it also takes the amount in modvat clearing account.
    Please guide us so that the Higher education cess amount does not hit into modvat clearing account but to behave same as basic or education cess.
    Our tax procedure is formula based (TAXINJ)
    Regards
    Maninder

    Hi,
    Check your H.EduCess condition type in following path ,where we specify which condition type is used for which sort of tax
    SPRO --> Logistics general > tax on Goods Movements>India > Condition-Based Excise Determination>Classify Condition Types
    Also check G/L account for excise transaction.
    SPRO  -->  Logistics general  -->  tax on Goods Movements --> India  --> Account determination -->  Specify G/L Accounts per Excise Transaction
    Regards,
    Biju K

  • Costing run activity one materieal is value double another materieal  corec

    Dear gurus,
    we run costing run in 20 materieal code insted of 20  materieal  one materieal is showing  double value remaining materieal is showing perfect.
    we chacked BOM and routing in workcenter which is same for all materieal codes,
    please replay as soon as posible i want release materieal cost.
    Thank you!
    Regards,
    Pradheep.

    Hi,
    see product cost estimates is calculated using cnsumption qty mention in BOM multiplied by the price maintained in the material master + std direct activity qty mentioned in workcenter/routing and indirect activities related cost center multiplied by the activity rate maintained in KP26.
    Now i am amazed that how could be BOM / ROUTING can be same for all the material, if this is the case means all the material and its cost will come as same if there is no difference in indirect activity qty and rate.
    So plz check the BOM Components there might be double std qty entered for the consumption else there would be the line repetion for the qty. U can also check for the direct activity qty and activity calculation formula.
    Regards / Ashok verma

  • Tables for Costing values in Sales

    Dear SAP experts ,
    I have values in trasaction KKAC and CN41N that I need to capture in a report.
    Do you guys know what tables I can access these values the fastest ?
    In KKAC , I would like to see the total Cost and Revenue, so going thru COEP would be a pain . Any other suggestion ?
    IN CN41N I need to look at the Total Cost and Total Revenue as well based on the WBS. - Any suggestions ?
    Thanks a million
    regards
    Moon

    Hi ,
    Thanks for your reply but this is not what I want.
    I know the transaction codes, but I need SAP tables now because I am creating my own customised report.
    My reports need to look something like what I see in KKAC and CN41N, hence I need SAP tables that I can use to extract this same data.
    KKAC - to look at cost and revenue as a whole ( not line item ) anything else besides COEP  ?
    CN41N -  to look at the cost and revenue at WBS level - what table can I use ?
    rgds
    Moon

Maybe you are looking for