Table where Manual Check Posting via FF68 is stored

Hello Colleagues
I have posted a Manual Check via T.Code FF68. Is there a Table where I can see the below fields for the Check that I have posted.
1. Check No.
2. Check Issuer.
3. Check Amount
I have gone thru Table PCEC and FKKCR but could not find all of the above 3 fields.
Pls let me know if you know any other Table displaying all 3 above.
Thanks in Advance
Regards
Amarnath.R

Hi Amarnath,
I do not know that the tables you are looking for, but this is what i normally do to find out the tables related to a transaction.
1. create 2 GUI session, and then turn on the trace, ST05
2. make sure you select the 'Activate Trace with Filter'
3. enter your userid, and click continue.
4. switch to another GUI session, and do your transaction
5. switch back to the previous session, and select 'Deactivate Trace'
6. select 'display trace'. look for the OPEN operation and see the table names. then use se11 to check the table.
I hope you can try this method for what you need.

Similar Messages

Please tell me the table where customer contact persons mail id is stored

Hi,
Can any body please tell me where the Please tell me the table where customer contact persons mail id is stored .
That we are maintaing in the XD02 transaction in the E-Mail option for the customer.
Please tell me as it is very urgent.
Thanks

Hi
pls check ADR6 <b>SMTP </b>
Customer Master Data Tables
KNA1 - Customer Master
KNB1 - Customer / Company Master
KNVV - Customer Sales Data
KNBK - Bank Details Master
KNVH - Customer hierarchy Master
KNVP - Customer partners Master table
KNVS - Shipment data for customer table
KNVK - Contact persons Master table
KNVI - Customer master tax indicator table
Message was edited by:
SHESAGIRI.G

Table where the profit center valuation standard is stored.

Does anyone know the table where the profit center valuation standard is stored. In MBEW I see the legal valuation standard but not the profit center valuation standard. Both of these can be viewed in the material master data in the accounting 1 tab.

Hi,
CEPC table
Rhea.
Edited by: rhea on Sep 26, 2008 1:51 PM

Need the TABLE where SALES TEXT of a material is stored

I need the table where the sales text of a material is stored. This can be onbtained from MM03 --> SALES TEXT. Here we can pick it up from the language.I need the table where it is stored.

Hi Gurpreet
Please follow the below steps:
1. Go to MM02.
2. Select View: <b>Sales Text</b>
3. When you are in the editor, use menupath: Goto->Header
Here we can get the details of Text-ID, Text Name, Language, Text Object.
Use these details for FM: READ_TEXT.
We can retreive all text in the output of the FM.
Hope this helps you.
Kind Regards
Eswar

Database Table where modifications to message long text are stored (log)

Hi,
As per manual correction mentioned in SAP note 1144291,
we have changed the long text for message XC092 by modification of the long text.
This note 1144291 is a pre-requisite for SAP Note 1310808.
After the notes were implemented, it is noticed that message CURTO1055 has incorrect information in its long text. This is because, the variable in the long text are not correctly defined in the long text.
Both the messages XC-092 and CURTO1-055 are SAP standard.
The error for CURTO1-055 can be rectified by modification of the long text and maintenance of the correct variables.
However, my question is:
Where do we check the log for document modifcation for a message long text.
I have found the logs relevant to my modification in table DOKHL and DOKIL.
But in which table do we get all of the foll. data:
- Message class
- Message number
- Modification name
- Modification created by
- Modification done on
- Last changed by
- Last changed on
Kindly help. A <removed by moderator> solution would be really helpful.
Best Regards,
Smruthi
Edited by: Thomas Zloch on May 5, 2011 12:07 PM - urgency reduced

Hi Smruthi,
The modification changes would be in the SMODILOG table. Please note this is a core basis table and should not be changed, however to best find your changes search under the TRKORR field with the relevant tp request.
Best regards,
Derrick Hurley
Development Workench

Table where product category assigned to supplier is stored in SRM

Hi,
We are on SRM 7.0.
We have replicated material groups from ECC as product categories in SRM and vendor master also into SRM. Now I log into SRM portal as strategic purchaser and go to the following tab.
Strategic Purchasing->Business Partner-> Here I choose an existing supplier, open it up ...go to the Bidder data tab->Categories. Under categories I do an F4 help and choose one of the available product categories and save the entry.
Where is this information about supplier and product category combination stored in SRM. Which tables?
Request you to shed some light on this.
Regards,
Nikhil

HI
there is no relation like that.
some customer expects this facility
Product category vs supplier
prod category - Building equipments - DLF
- telecoM - HUTCH
Try bbpfrg tables.
muthu

Can´t find the table where the effectivity of contract lines is stored

Hallo all,
I need to build a sql-query on the Service Contracts Authoring Form (OKSAUDET) where I include the table(s) in which the information about the effectivity-sub-lines in the pricing tab of the lines tab is stored.
But I just found the table OKS_CON_COV_LEVELS_INT_ALL which is used for transmitting cover levels form legacy systems etc. I can`t find the equivalent table for ebs-data… please help!
Thanks a lot in advance
Oliver

(You didn't specify version, this works in 11i but I haven't used 12)
Just something to try - if you haven't already - go to the screen where you can see the information, turn on your diagnostics, and examine the last SQL Statement run. It may point you to where this value is stored.
Also, I've run into more than one field over the years that was derived from other data on the screen, rather than selected directly from the database, this could be a situation like this.
Good luck, these can be some of the most maddening things to track down!

Table where weekly and daily sales data is stored

Can any one please tell me in which all tables i can get weekly and daily sales as i get in S001 which is period wise.

S001 Table itself is based on date which you can segerate on week and further daily and may be month. This is communication struture table ,. For futther details look of s*** table if you dont fullfill your requirement
reward points if useful
rajesh

Table name where description for any code group is stored

Hi All,
Can Anybody tell me name of table where description for any code group is stored.
Thanks in Advance
Regards,
Amit

Hi Amit,
It is in table QPGT.
Kind regards,

What are the Manual check Deposit Tables and Fields(FF68)

Hi Gurus,
I have reqirement to get get Details about SlipNO,Cheque NO,Cheque Date,Posting Date,
Party code,Bank key,Currency ,Amount,Bank Account,Value Date,Entry Date,Banker's name.
could u help me
Thanks in Advance
Sivakumar.

Hi,
Yes it doesn't. Where do you store this information when you are posting in FF68, can you tell me the field names or where exactly do you see these fields.
For check deposit, you can design your own layout and field text in the layout will not be exactly what you will see in the table. I think that must be the case in your scenario.
Suggest look at the layout configuration from Transaction code OT45, open the variant you use (you can find that from the FF68 screen, menu option Settings --> specifications).
Also, pick one already posted check deposit in FF68 and look for the values you are interested in for that statement in tables FEBKO and FEBEP.
There are other tables in Banking but I do not think they would be of much use like FEBCL, FEBRE and FEBVW. FEBVW will give you the bank name where you are depositing the slip.
Cheers.

Manual check associated with wrong posting document

For our manual checks we use a two step process:
1. FB01 to create the payment document.
2. FCH5 to create the check that will be associated with the corresponding payment document.
However, we created a check before creating the correct payment document. Now the check corresponds with the incorrect payment document and will be posted to the wrong bank accounts. To make matters worse, the check has been cashed already.
Is there any way to change the posting document associated with this check?

Hi,
Your issue can be resolved technically only with the help of your ABAPer.
Go to SE16N and enter table name PAYR, and enter your company code and check number in the selection screen and execute it. Now you will get one record for your selection.
So here you need to change the values of the below fields manually.
Vendor Code ( if you have given wrong vendor code also whle creating FCH5)
Payment Doc Number
Currency
Vendor Name
City
SAVE it and now check with FB03 for the newly assigned document, whether system is showing CHECK INFO by menu item -> Environment -> Check Information
Check for the old document also in FB03, system would not show check information anymore like above.
Hope this would resolve your issue.
Note: Only your ABAPer can change the values in the SE16N.
Regards,
Srinu

FF68 Manual Check Deposit - System not finding BELNR

I am using FF68 transaction for Customer Check Deposit. In the Variant for check deposit ( T code OT45) I have defined BELNR as selection field. However when I enter manual check through FF68 and give document number in field BELNR , system does not pickup document automaticlly. I need to go Transaction FEBA and enter the customer number manually to pickup document number. I want system automatically pickup document and do the clearing. Pls advise why even after entering document number in BELNR why system is not picking docment automatically.

Hi Sonia
Was BDC session generated on processing FF68?
Auro

Assets table where We can know Depreciation Posted & Not Posted.

Dear All,
We are having Serious Problem In Assets Depreciation.
Can Anybody Pls let me know the table where we can find Assets , Depreciation Posted & Not Posted as we have to make some Analysis.
Thanks & Regards,
Pankaj

Hello
go to t093d which will suffice ur requirement
Regards
madhav

Manual Check Deposit

I have done with all settings of Bank Accounting;
Created House Bank
Created Check Deposit Account
Crated Account Symbols and assigned GL accounts
Created Keys and defined Posting Rules
Created and Assigned Business Transactions
Defined Variant for Manual Bank Statement
Defined Variant for Check Deposit
At Check Deposit entry FF68, i have saved the statement and when i tried to post it did not posted to GL account i have verified my Checks Deposit Account and Main Account with FS10N.
What other configuration to be done for Cheque Deposit.
<a href="http://www.4shared.com/file/21805418/7eeced4c/2_online.html">Detailed Error Txt file is here</a>

Have you created a batch session.
Check Sm35 to see if one is sitting there for you to post.
If not get an ABAP'er to debug the process to see where the hole is.
OK forget the above, check your posting key rules make sure you are just posting to the customer.
Message was edited by:
Mark Chalfen

APP & manual check

Hi,
we are using F110 for making vendor payments, with EDI payment method.
we came accross a situation where, after completing APP, it is possible to update manual checks in FCH5 for the same payment document that is already paid via EDI.
can u pls suggest a way to avoid updating manual checks for the payment documents paid in APP with EDI payment methods?
Also , pls let me know whether it is possible to print checks that are updated in FCH5 (is it possible to create an abap program for this?)
thanks
rekha

Hello,
I do not know the reason why you want to update the check number when you are making payment through EDI.
I believe you are currently generating a file and uploding to the Bank using some third party software.
Could you please explain in details the business scenario??
Regards,
Ravi

Table where Manual Check Posting via FF68 is stored

Similar Messages

Maybe you are looking for