Tables for Cube

Hi guys,
im trying to activate a cube, but the process fails, saying there was no primary key for the table /BIC/L<CubeName> .
Now i wonder what kind of table that is. Is there any complete List of tables for Cubes? I know about those:
/BIC/F<CubeName>      Fact table,
/BIC/E<CubeName>      compressed Fact table
/BIC/D<CubeName>T     Time dimension table
/BIC/D<CubeName>P     Requenst dimension
/BIC/D<CubeName>U     Unit dimension
/BIC/D<CubeName>1       User dimension 1 and so on
/BIC/L<CubeName>     ????
What is the purpose of table L? Are there any other important tables for the cube?
cheers...

Hi,
This is the validity table. which is /BIC/L(cube name). If u have any non cumulative key figures then a validity table will be created for the same. But am not sure about the error.
Khaja

Similar Messages

Status control table - 'Perform update for status control table for cube '

Hello Experts,
While loading data to DSO, I am getting this message - 'Perform update for status control table for cube Z3MLQUA'.
What is status control table ? and can I have some inputs as to how to solve this issue
Regards,
arjun

Hi,
This message is not a issue in itself. It is just a SAP message which means that the system is checking/updating the system tables to carry out the operation whether it can be done or not.
If your loads are failing at this step or after this message there can be many reasons, check some of the possible reasons below
Performing check and potential update for status control table
Update from PSA error in Process Chain
problem in deleting request
Reporting not available ,even if Data is sucessfully loaded into DT
Hope this helps,
Kush kashyap

Table for Cube request

Hi Experts,
I would like to know the table in which data load request for cube is stored with records added and transferred and other cube related details. Please help.

Hi,
for the request part you can look at the table RSBKREQUEST by filling in the source or target object.
Different tables for cube are :
RSDCUBE    Directory of InfoCubes
RSDCUBET   Texts on InfoCubes
RSDCUBEIOBJ    Objects per InfoCube (where-used list)
RSDDIME    Directory of Dimensions
RSDDIMET   Texts on Dimensions
RSDDIMEIOBJ    InfoObjects for each Dimension (Where-Used List)
RSDCUBEMULTI    InfoCubes involved in a MultiCube
RSDICMULTIIOBJ     MultiProvider: Selection/Identification of InfoObjects
RSDICHAPRO     Characteristic Properties Specific to an InfoCube
RSDIKYFPRO    Flag Properties Specific to an InfoCube
RSDICVALIOBJ    InfoObjects of the Stock Validity Table for the InfoCube
thanks,
arminder

Inactive Dimension Tables for Cube

Hi Gurus ,
I am transporting a cube from one system to another and the transport fails becasue the dimension tables are in active in the target system. Now since this system is read only I cannot manually activate it , last resort I even trioed opening the system and activating it and re transported the transport. I get the same error saying that table /BIC/ZXXXXX is inactive.
Can anyone help....please....

hi Sanjeev,
did you change any dimensions in dev ?
like delete some characteristics from existing dimension,
or add new characteristic or move from one to another
dimension ?
if so, you may need to delete production data first,
to avoid this, please change back characteristics to previous dimension, and create a new dimension and add new characteristic to the new create dimension.
another possibility is database problem, try to search oss note for infocube dimension inactive.
hope this helps.

Table for Cube & ODS count

Hi Gurus,
Could you please tell me the name of the tables to find the Total count of
1) Cubes
2) ODS
3) Queries (Report)
4) No of total users,
in BW system.
Thanks
Nisha

Hi,
                             Table name
No of total users      USR02
Cubes                     RSRREPDIR
Queries                   RSRREPDIR
Hope this helps...

Convert the Tables in se14 for cube

I have the requirement to convert the table for the cube since we have changed the Group and Legal Costs stored in BW as currencies to 6 decimal places. The two objects changed to floating point numbers . Now I am asked to covert the tables for the cube how should i go about this
first I will go to se14 and give the cube name like /BIC/FZINV_C09 Then what should i do to convert the tables or should i follow some thing else in se14 please clarify me soon. i am asked to do this as per tech document.
Conversion of all the tables used in Info cubes & ODS objects, in Development Systems
soniya

Hi Dinesh and Anil, You both are genius, but please help me what it means by changing the data for legal and group cost directly in data base should i go to se11 and type /bic/fzcobmc01 and select databasetable and now change under "field tab" the data type to floating point and length 16. and also should i change the values by going display table values do i change them manually all 100 values since dinesh pointed the right thing so here is my approach
soniya
proceed as below
1. change the key figures data type and decimal places AND CTIVATE THE KEY FIGURE
2.

How to View master data & Trasaction data tables for Puchasing Cube

Hi BW masters,
How should I check which tables (Master data tables and Transaction data tables) are involved with Business Content Cube(Purchasing data 0PUR_C01). I would like to know this information in order to go to that table and browse the data in that table. Where should we go and check this out.
I will reward the points for the good answers.:-)
Thanks
Syed.

hi Syed,
to view tables' content you can use SE16,
you can try infocube name, dimension tables of cube are store in *d[infocube name]1 to F, fact tables are f[infocube name] and e[infocube name]-compress,
infocube data are stored in star schema, you can use LISTCUBE to view the content (to see the structure/tables in cube, use LISTSCHEMA),
master data (not time-dependent) are stored in text table t[infoobject name], attribute - p[infoobject name] and hierarchy - h[infoobject name],
take a look bw multidimensional data modeling for detail
http://help.sap.com/bp_biv235/BI_EN/documentation/Multi-dimensional_modeling_EN.doc
hope this helps.

Extraction for Cube 0PM_C05 requires customizing of table T_PMC05

Hi can any body tell how to solve this error.
Extraction for Cube 0PM_C05 requires customizing of table T_PMC05.
Iam loading data to 0PM_C05 CUBE which has a datasource 0PM_PRM_PLCS_1 which is displaying as errors in source systems.
This is a plant maintenence cube and ia replicated the datasource agian in BI Production and it is active.
Edited by: manukonda anil kumar on Feb 17, 2011 5:45 AM

Hi syed
Take the help of an ABAP person.
There will be same table resembling the name .
So the data needs to be updated in the corresponding table .
When the core people are updating data from different palnts and sites accross.
In my case i haven't moved further.
This is a configuration change form R/3 side where the data had to be fetched in the orrect table .
Regards
Anil .

Tables for Qurey names and cube

hi,
I want to know the list cubes against each query.
can any one tell me what are tables for the folllowing
1) to get list generic queries avalible .?
2) cube against each of that query?
3) Data source against each cube?
4) generic web templates against each query?
regards
Laxman

Hi Olin,
RSZELTDIR: filter by: OBJVERS = 'A', DEFTP: REP - query, CKF - Calculated key figureReporting component elements, query, variable, structure, formula, etc
RSZELTTXT: Similar to RSZELTDIR.
Texts of reporting component elementsTo get a list of query elements built on that cube:RSZELTXREF:
filter by: OBJVERS = 'A', INFOCUBE= [cubename]
To get all queries of a cube:RSRREPDIR: filter by: OBJVERS = 'A', INFOCUBE= [cubename]To get query change status (version, last changed by, owner) of a cube:RSZCOMPDIR: OBJVERS = 'A' .
Web templates
RSZWOBJ - Storage of the Web Objects
RSZWOBJTXT - Texts for Templates/Items/Views
RSZWOBJXREF - Structure of the BW Objects in a Template
RSZWTEMPLATE - Header Table for BW HTML Templates
Regards
KP

Request view of a cube - Which table for DTP texts?

Hi all,
does anybody know where I can find the text of column "DTP/InfoPackage" in slide "requests" if you start "manage" of an infocube?
We started a dtp, but name was impractical. We just wanna change text in request-view (not rename and reload).
It doesn't seem to be table RSBKDTPTH. We changed all names here, but old name is didplayed in request-view.
Does anybody know which tabe is selected here?
Regards,
Christoph

Hi,
check for the below tables for text.
RSBKDTPSTAT
Status Information on Data Transfer Process
RSBKDTPT
Texts on Data Transfer Processes
RSBKDTPTH
Texts on Data Transfer Processes
i checked my system BW 7.0 not there. if your using the BW 7.3/4 would have text.
Thanks,
Phani.

Define the Characteristics of the validity table for non-cumulatives

Hi Friends,
Here I am designing MultiProvider ( ZCA_M01), based on the Two Business content info cubes (0IC_C03 & 0SD_C03 ) & one customized info cube (ZPUR_C01).
I done Identification for char & keyfigures also.
When i trying to activating the Multiprovider, here i am getting the error , error message is : Define the Characteristics of the validity table for non-cumulatives.
Even here I am attaching the error message help also.
Message no. R7846
Diagnosis
The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
Examples of such characteristics are:
A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
Procedure
Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
In the example above, the characteristics "plan/actual" and "plant" must be selected.
The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.
Please take as a high priority.
Thanks & Regards,
Vanarasi Venkat.

Hi Venkat,
If you want to include 0IC_C03 cube in your multi provider the you must make sure that the time characterestics ( 0CALDAY, 0CALMONTH ....) are present in all of the other info providers which you are including in the MP. The Time char to choose depends upon the Inventory cube in which you have mentioned during the definition. As you are using the standard cube 0IC_C03 it has the time char as 0CALDAY. Try to include this in all the other info providers and dont include more tha one Non-cumulative in the MP.
Try this and see if it helps....

Error when running report: "Error in aggregate table for InfoCube"

Hi Experts
We had a temporary error, which I would like to find the root cause for.
We where running a Workbook which is based on a multiprovider. For a short period of time (around 10 minuts) we got the following error when we executed the workbook based on this multiprovider:
"Error in aggregate table for InfoCube"
There where no loads or aggregates rolling up on the cubes in the multiprovider.
I see no short dumps as well in ST22.
Have anybody seen this error before, and how can I trace how this error occured?
Thanks in advance.
Kind regards,
Torben

Hi Sneha,
I will Suggest u to do some RSRV tests.
Go to transaction RSRV. There you will find test for aggregates. Just Perform them and see whether you get any discrepencies.
Regds,
Shashank
Edited by: Shashank Dighe on Jan 4, 2008 10:51 AM

BI beans does not use QUERY RERWITE for cube

Hello!
First of all I would like to say big thanks to Keith for help on dimension rollup. It works now.
I am creating a pilot environment with
Oracle 10.2.0.3
OWB 10.2.0.3
SS Add-in 10.1.2.2
and one cube ST_R and three dims
DIM_R_NOMA for products
DIM_R_CIDI for stores
DIM_R_TIME for time
Now I have deployed dimensions and cube to CWM2. Dimensions are working quite well. I would say even better than in MOLAP. About 1 second for rollup on 2000 members in level.
Now I am facing second problem. I can not force BI beans (which is used in SS Add-in and Disco and OWB browser) to use summaries prepared by DBMS_ODM package.
1/ I have prepared MV LOGS for dimension and fact tables
2/ I have prepared MV for dimensions using DBMS_ODM
3/ I've prepared materialized view for cube aggs. with
DBMS_ODM.CREATESTDFACTMV('WWHH','ST_R','ST_R.sql','C:\TEMP',true,'FULL');
CWM2_OLAP_CUBE.set_mv_summary_code('WWHH','ST_R','GROUPINGSET');
as described in OLAP REFERENCE on DBMS_ODM page.
I explained all my MVs - they seem to be OK. They support
REWRITE_GENERAL,
REWRITE_FULL_TEXT,
REWRITE_PART_TEXT
There are no support for PCT rewrite etc.
My user 'WWHH' has a privileges:
ANALYSE_ANY
QWERY_REWRITE
GLOBAL_QWERY_REWRITE
My database has setting
QUERY_REWRITE_ENABLED=true
Stale_tolerated=enforced
all MVs and tables are analyzed.
I do not use parallel settings on tables,MVs.
to do some further analisys I've enabled olapcontinuous_trace_file. It generates some useful SQL statements from BI BEANS in UDUMP. These statements DO NOT resolve in MAT VIEW in explain plan
Questions:
Are there any settings for BI BEANS to turn on/off?
Are there any other packages to create MVs?
How to explain WHY MVs are not used?
THanks everybody for cooperation.
Regards,
Kirill Boyko

Keith,
Thank you for response.
I refreshed metadata, but no result. Again, dimensions are OK, but not cube. I am attaching explanation why it did no rewrite. This explanation is coming from
dbms_mview.Explain_Rewrite
QSM-01150: query did not rewrite
QSM-01263: query rewrite not possible when query references a dictionary table or view
QSM-01284: materialized view MV1125 has an anchor table DIM_R_TIME_V not found in query
QSM-01102: materialized view, MV1125, requires join back to table, DIM_R_CIDI_V, on column, REGION_ID
QSM-01219: no suitable materialized view found to rewrite this query
QSM-01284: - is wrong. I have DIM_R_TIME_V in MView.
Here is my MVIEW script from database:
SELECT
FROM
WWHH.CAWHTB2 a,
WWHH.DIM_R_CIDI_V b,
WWHH.DIM_R_NOMA_V c,
WWHH.DIM_R_TIME_V d
WHERE
b.STORE_ID = a.CIIDCA AND
c.ARTICLE_ID = a.NMIDCA AND
d.DAY_ID = a.CLIDCA
GROUP BY GROUPING SETS ( ...)
Could you tell me where to check in metadata that MVIEW is correctly setup?

The table for storing data for infocube and ODS

Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!

Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit.

How to identify the source column and source table for a measure

Does anyone have a query that I can use to positively identify the source column and source table for a cube measure in an SSAS cube? Visual Studio shows ID, Name, and Source, but it is nearly worthless in a large cube and database.
Also - the same for a dimension would be great.
If no query exists for this, can someone please explain how to find the source column/table for a measure and for a dimension?
Thanks.

DMVs don’t expose the DataSourceView content. AMO is much better suited for object model operations like
this than the DMVs. PowerShell is also sometimes an option, but in this case C# code would be much easier because analyzing the contents of the DataSourceView is much easier using the .Net DataSet class.
Hope this helps.
Reeves
Denver, CO

Tables for Cube

Similar Messages

Maybe you are looking for