Tabs don't display address

When I open Firefox 6, the tabs will keep saying 'Connecting...' with the green timing circle. Some of them the green circle will stop, but it still says connecting...
Open a new tab and it will go to the web page but still says 'New Tab" not the web-page name.
Takes a long time to get to the websites as well.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Similar Messages

  • TabPlus, new tabs, don't open after typing in website addresses

    I have used TabPlus (now called Tab Mix Plus) for years; I usually have quite a few tabs open; everything has worked perfectly until FF updated me to FF8, beta. Today, I tried to download & install version 8, newer than the Beta, but that did not help.
    Tab Plus' new tabs, don't open after typing in website addresses; the cursor line to type in the next letter or word remains, blinking. I cannot open anything in any new tab that I have added by pressing down with the right mouse button and clicking on "New Tab (after this tab)."
    As this problem did not exist in any version prior to 8, perhaps the developer has to do some updating. If not Firefox needs to fix some bug.
    I have been with Mozilla FF since its beginning; it has been by favorite browser, but now, out of frustration, I have been using Chrome.
    If you can solve this problem for me, I shall be happy to return FF to being my Default Browser.
    All the best,
    Carole (mhashev, my on-display name)

    Is there a way to control the webpage that new tabs start at?

  • Glossary tab doesn't display and Glossary pop ups don't work

    TCS 3.5 (FrameMaker 10, RoboHelp HTML, version 9)
    Windows XP version 5.1 sp3
    Internet Explorer 8.0
    My apologizes if this should be in a different forum.  Also, from searching I have found that the problem is usually that the DLL has not been loaded -- I have done that. So I am at a loss. Thanks in advance for your help!
    Problem: My .chm output does not have a Glossary tab and the Glossary text pop-ups in my topics do not work.
    Background: Since I am new to TCS 3.5 I'm going to give my entire process. Quite frankly I'm not even sure if my entire process is correct.
    Steps:
    Before I began: I loaded the HHActiveX.dll. Here's the proof:
    Create a blank project.
    Import master page (File > Import > Master Page).
    Load project settings (File > Project Settings > Import).
    Link FrameMaker Book (File > Link > FrameMaker Document)
    Configure Properties (Right-click the book file in RH and click Properties).
    In Properties, select Convert FrameMaker Table of Contents and give a name.
    In Properties, select Convert Glossary and give a name.
    In Project Manager pod, right-click the Glossary topic (System Management GLO) and click Set as Default.
    Update Project (File > Update > Update All).
    Run Glossary Hotspot Wizard (when running wizard, select the glossary topic that was set as default in step 8)
    Edit the UpdateMarkedGlossaryTerms.jsx script (change the GlossaryName variable to the Glossary topic created in step 8 and change the GlossaryStyle variable to TextPopUp)
    Run Update Marked Glossary Terms script (In Script Explorer pod, right-click the UpdateMarkedGlossaryTerms.jsx script and click Run).
    Run graphicinreferencepages.jsx script (this inserts my note graphics from FM reference pages)
    Configure Microsoft HTML Help layout.  Here's the properties file:
    16. In the properties file I selected the Glossary topic that I had set as my default in step 8.
    17. Click Save and generate.
    Result: In the .chm file (and in View Selected Item in RH) when I click a glossary term in a topic, I get "This program cannot display the webpage". Also, the Glossary tab is not displayed.

    Welcome to our community, Linda
    In RoboHelp, if you open the Glossary pod (View > Pods > Glossary > Select Glossary) do you see terms and definitions listed there?
    If not, that would explain it as the Glossary has no entries.
    Assuming it does have entries, you may simply need to enable the tab by clicking View > Pods > Project Set-up. Expanding the Windows section in the pod and double-clicking your CHM window.
    A CHM window looks like this:
    If you don't see a CHM window, you will need to create one. If you do see a CHM window, double-click it. Then ensure the Glossary is enabled.
    Keep us posted! Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • STO - Excise tab not getting displayed in material document after posting.

    Dear all,
    We are facing an STO issue where in after we have done the receipt at the receiving plant with excise, the excise tab does not display in the GR material document.
    It is plant to plant stock transfer with excise, the process that we are following as given below:
    1) STO PO - ME21N
    2) Outbound delivery - VL10B - Post PGI in VL02N
    3) Outgoing excise invoice - J1IIN  - With the key DLFC.
    4) GR - MIGO with excise invoice capture.
    During GR posting in MIGO screen the system does display the excise tab, we enter the outgoing excise number and the corresponding values appear in BED, ECS and HCES. We post the GR material document.
    But after posting the material document if we display the same GR material document it does not show the excise invoice tab. And since we are not having part 1 entry number we are not able to post the part 2 entry in J1IEX.
    Request to please do let us know if we have missed out on any configuration or master data.
    Regards,
    mahesh.

    Hi,
    Do the all customization setting for CIN for reference check the following link for India. and Material management
    http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
    You have to maintain Excise master data for material,vendor and PLant in J1ID .
    reward if helpful,

  • Some graphs don't display in OEM Grid Control 10gR5 (10.2.0.5)

    A number of the performance graphs (e.g. Top Activity) don't display i.e. there is nothing but if if you right-click in the empty area you get a small pull down with Print, Settings, About Adobde Flash 10.
    This has all happend after upgrading to 10.2.0.5. OMS and client environment is:
    Windows 2003 SP2 (32 bit), IE 6 with Flash ActiveX 10, Flash Player 10.
    Anyone got any ideas or anyone got it working fine.
    Thanks.

    Windows Server 2008 OEM 11g Performance graphs do not display.
    Click OEM Performance Tab and IE7 information bar displays message:
    "Your security setting do not allow websites to use ActiveX controls installed on your computer. This page may not display correctly."
    Workaround: Disable Internet Explorer Enhanced Security Configuration in Windows Server 2008
    Unlike with previous versions of Windows Server in which you could disable Internet Explorer Enhanced Security Configuration by removing the component in Add/Remove Programs, Windows Components
    the Windows Server 2008 implementation of Internet Explorer Enhanced Security Configuration is configured through Server Manager.
    Select the root of the Service Manager navigation pane, and under the Server Summary click Configure IE ESC, which is part of the Security Information section.
    A dialog box appears, letting Internet Explorer Enhanced Security Configuration be enabled/disable separately for normal users and administrators.
    See YouTube video:
    http://www.youtube.com/watch?v=OO3PPN1olHY

  • Excise tab is not displaying in migo

    Hi,
    for one material, purchase order has done. when i am going to do migo against purchase order, the excise invoice & excise items tab is not displaying.
    note:- for all other materials(purchase order), excise tab is displaying.
    could you please solve this problem.
    thanks/regards
    vish

    Hi,
    Check the problem with repect to the material,
    Check if the Tax % is assigned properly for the combination of tht material. check J1ID,
    Is in the PO the excise amount calculated? Check the condition records?
    Thanks & Regards
    Kiran

  • Events added in iCal don't display in Google Calender

    I'm using my google address for iCal as I don't have a MobileMe account.
    Events added in Google Calender display in iCal, but events added to this account in iCal don't display in Google Calender. I have tried subscribing to my Google Calender in iCal, but the address isn't recognized by iCal.
    I have even tried deleting and re-adding my Google Calender, but still no joy.
    Are the calenders I am using in iCal and Google the same calender, or are they actually different calenders with the same username? Someone help me sync the **** calenders!

    Hi Ellyenne,
    Ellyenne wrote:
    It didn't help. 
    I want my iCal events from my HOME calendar to display in my google calendar. 
    I DO NOT want to move my iCal events to my google calendar.  I have way too many.  So, why won't my iCal events show up on my google calendar??  My google events show up on my iCal. It's a SYNC. They should be the same.
    I'm sorry my answer to Clint is not what you want.
    iCal and Google on their own do not do what you want.
    There are/were some third party add-ins that worked in the way you describe that were mainly developed before Google Calendar had CalDAV integration.
    Best wishes
    John M

  • Word docs don't display fonts since upgrade to 10.6.

    Word docs don't display fonts since upgrade to 10.6.  Got this error message in Console:
    6/14/11 9:38:14 AM          [0x0-0x11011].com.microsoft.Word[140]          Tue Jun 14 09:38:14 Michael-2.local FontCacheTool[144] <Error>: ATSFontGetPostScriptName failed: error -984.

    Thanks but I searched and searched there.  Nothing listed that addresses this issue.  Am I the only person to upgrade to 10.6 and have a problem with seeing type in Word afterwards?  Does anyone understand what the error message means?

  • Added photos to the video timeline but they don't display.

    I have added some photos to the video timeline but they don't display. The end of the last clip is frozen and then the next clip starts once the time for the photo display has elapsed.
    A previous photo that I'd inserted in the project previously DOES run correctly. I suspect it may be to do with the fact that I've used cutaways in part of the video. However, where I'm inserting the photos is not in a section where there is an existing cutaway.

    It would appear that it's a bug with iMovie. It won't let me add new photos to the duplicated project, but it WILL let me add them to the original project.
    After searching the Discussion forums, it would appear that it has affected other users; some have used 'workarounds', but the solution doesn't always work for all. Hope Apple can address it.

  • SOLVED:Tabs is not displayed correctly?

    Gang,
    I have a very strange problem which I can't really understand why APEX behaves it way it does (well I've probably told APEX to do so, but I can't understand why).
    I have 3 Parent Tabs:
    T_PAGE1
    T_REPORTS
    T_ADMIN
    All of the Parent Tabs have one or more Standard Tabs associated to them. And each Standard Tab is associated with one or more pages.
    But the strange thing is that I have associated page 3 with a std tab which then belongs to the T_REPORTS Parent Tab. If I run the page the Parent Tabs are not displayed at all, but the Standard Tab is (and also the breadcrumb). I did assign the tabs to the page when I created the page and I have retried the same thing a couple of times with the same result.
    And if I run any other page in my application I can see the Parent Tabs and if I click on the Parent Tab (T_REPORTS) the Parent Tabs disappears and I only see the std tab.
    Any ideas or is this completely confusing for you as it is for me ???
    Cheers,
    Andy
    Message was edited by: A Tael
    I should really make myself a martini and stop thinking that I can build APEX apps. The issue was that I had assigned my T_REPORTS Tab with the wrong Parent Tab. Doh!

    Glad your first experience on the Arch forums was successful. Don't forget to edit the thread title to make it say "Solved".

  • New topics are compiled in but don't display when help button is pressed

    Folks,
    I'm using RoboHelp HTML Build 6. I am the only writer who uses RH and have been using this build for 2 years or so.
    I recently got a new map file from the developer containing 2 new map IDs. I used the same steps to import the map file, create the new topics, and map them to the new map IDs that I have been using for years. But when I compiled RH and pasted the chm into the application folder, those 2 new topics don't display when the help button is clicked on the dialog box to which they are mapped.
    When I generate the chm I can look at the output at the bottom of RH project view and see that that the 2 new htm files are being compiled into the RH project. I can also see them if I open the generated chm and go into the TOC and click on a link to them.
    Does anyone have any ideas? I have tried redoing the usual procedure (see below) for the importing and mapping from scratch several times. I have also tried BugHunter (see below).
    Procedure for Importing and Mapping (this time the help for all the older dialog boxes works but not for the 2 new ones)
    1. Open the new map (.hm) file from the developer and add #define followed by a space to each entry beginnng with the string HID in the new map file (I don't know why but nothing works unless I do this.)
    2. Delete the old map file from the RH project.
    3. In Windows Explorer, copy the new .hm file into the RH project folder.
    4.In Project Manager view, open Context-Sensitive Help. Right-click on Map Files. Select Import. Browse and select the new map file.
    6. Map the new topics using File, Edit Map IDs.
    7. Generate the .chm and pasted it into the application where it always goes.
    BugHunter Procedures and Results
    I first tried the Test HTML Help API dialog.
    I specified the .CHM file I compiled and tested both options:
    --HH_DISPLAY_TOPIC: I put in the name of the new help (htm) file and its relative path and clicked Help. Nothing happened.
    --HH_HELP_CONTEXT: I put in the Map Number for the new dialog box and clicked Help. The new help topic I had created displayed.
    I also used the Tools tab in BugHunter to do a CSH (context sensitive help) Test. I identified the chm file and opened it and put in a new map number, then clicked Show Help. Nothing happened.

    Welcome to the RH forums.
    On the surface it sounds like you have done everything correctly so it should just be a case of going back and double checking that you have the correct CHM, that the mapid is exactly the same as in the app and that the app has been updated.
    Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
    Follow the RoboColum(n) on Twitter

  • Name of the standard FM called for displaying address in Smartform.

    Hi all..
    Wat is the name pf the standard FM that is called wen we use address in smartform,inputting the address number...
    Regards
    Rudra

    Hi,
    if we Inclue Address in Address Node, System reads address data directly from the data base tables.
    Inserting addresses:
    One can use the address node to insert an address into the form. This guarantees that the address is formatted according to the postal rules of the sender country.
    1) To create an address node , call the context menu for that node in the tree structure that one wants to contain the text and choose create->text
    2) Enter a name for the node and a description
    3) Determine the address type on the general attributes tab
    4) For organizational addresses one has to specify the address number, for any other one has to specify the person number and the address number
    5) In the box additional addresses one can maintain other attributes to specify how to display the address
    Addresses are printed using the ADDRESS_INTO_PRINTFORM function module.
    To enable the ADDRESS_INTO_PRINTFORM function module to call existing versions of an address for print output, the application program has to transfer the address number for address type 1, or the address number and person number for address types 2 and 3, to the function module or to SAPscript/SAP Smart Forms.
    If SAPscript/SAP Smart Forms are used for printing, the address number (or address number and person number) is to be specified here as a parameter. The ADDRESS_INTO_PRINTFORM function module then controls internally which version of an address is printed:
    In the standard system, printing of address versions is only supported for Japan. Besides the default version, the versions Kanji (K) or International (I) can also be printed.
    follow these links for brief information.
    http://www.sap-press.com/downloads/h955_preview.pdf
    Regards,
    Omkar.

  • Safari Tabs Don't have Labels after Yosemite

    Ok- I updated to Yosemite last week and everything appeared to be working fine everywhere... until today. In Safari if I open a new tab, instead of displaying the title, along with the x to close the tab it just is blank. The only way I can close the tabs is to go through file -> close tab. The tabs are there (although its sort of hard to see them since they don't have labels). Anyone have any ideas why this is happening?

    Safari in iOS 6 does not have thumbnails anymore. I stand behind my remark in that the device was not running OS 6 - it's not possible for Safari to have thumbnails in iOS 6.
    This is a screenshot of Safari running on my iPad3 running iOS 6.0.1. You see no little squares in the toolbar indicating the thumbnail views. Notice that I also have 10 tabs visible as well. That's not possible in the pre iOS 6 version of Safari. You can have up to 21 tabs open now IIRC.
    Safari in iOS 6 does not have thumbnails anymore. I stand behind my remark in that the device was not running OS 6 - it's not possible for Safari to have thumbnails in iOS 6.

  • EM don´t display the instances(infrastructure and midtier)

    Hi OTN Forum,
    I have installed a box Linux RH AS with Oracle9iAS R2 infrastructure and midtier in the same box.
    When I log in into EM with the user ias_admin the page don´t display the instances.
    Any idea about this issue?
    Thanks folks!
    Regards,
    Wilson

    The development module displays images in ProPhoto RGB colour space, the library module (I assume that's Bibliothèque) displays images in Adobe RGB colour space. 
    If there's a difference, then one possibility is a colour management problem (faulty monitor profile).  This could affect monochrome images, as it includes the tone curve.  Is the monitor calibrated and profiled with a hardware tool (Spyder, Colormunki or similar)?  If so, try recalibrating.  If not, then see what default profile is set for the monitor.  Control Panel (don't know what that is in French) -> Color Management.  If nothing is set, you could try setting the default profile as sRGB (probably called "sRGB IEC61966-2.1").  If sRGB isn't shown, click Add...  Does that make the two modules the same?  It might make the picture worse, but if makes then the same, then you know it's a monitor profile problem.  Try using Windows calibration (Colour management, Advanced tab), but better is to use a hardware tool. 
    Another problem could be that the Lightrroom previews are corrupt.  Develop module renders each image as it's displayed, Library module renders the images to a jpeg preview, and stores the preview.  The preview is rebuilt only when the Library module thinks the image has changed.  So you could change the image in Develop, and see if the image then chagnes in Library module.  If it doesn't change, something serious is wrong (protection issue on previews folder?  Faulty Lightroom installation?).  If it changes, but it's still different between Library and Develop, I'd suspect a colour management (monitor profile) problem. 

  • Warranty tab not getting displayed in service order

    DEAR ALL,
    I have an issue with crm services, I HAVE NOT ACTIVATED/USED INSTALL BASE IN MY SCENARIO AND HAVE CREATED PRODUCTS DIRECTLY/ DOWNLOADING FROM R/3.
    NOW WHEN I MAKE A SERVICE ORDER THEN WHEN I ENTER THE PRODUCT (EG: FINISHGED GOOD) ITEM CATEGORY BEING YANN (TEXT ITEM CREATED BY US) THEN THE WARRANTY TAB IS NOT COMING UP.
    when we add an expense item in the next line item warranty tab is getting displayed.
    KINDLY HELP.
    REGARDS,
    AMIT

    Hi for this u can use VCT but you to check for doc flow action settings and work flow before, then only you will get Guranty Data tab hope this will helpful
    Regards
    Venkat

Maybe you are looking for