Tabstrip control using screen problem

Hi,
Iam writing a program for ttabstrip contro with 2 tabs. In one tab , i want to place  some vbak fields. Wile iam placing fields in the first tab subscreen . It is showing an error
screenpainter: warning
A collision at target location [ 4 elementes] are turncated or not copied.
Is it possible to place the table fields in a subscreen under tab. if possible.
Can any one reply me.

hello,
here u want to display some fields in first tab
but,collision is taking place
this is due to the size of the fields what u want to display on the first tab
just decrese the size and check
thanks

Similar Messages

  • How to create subscreens in tabstrip control using  module pool

    hai experts,
    can u plz give me step by step procedure to create subscreens in tabstrip control using  module pool,

    hi,
    You can check this program
    <b>  DEMO_DYNPRO_TABSTRIP_LOCAL </b>
    This will help you in understanding the concept and how to create subscreens.
    Regards
    Nishant

  • Tabstrip control issue, screen freezes

    I have a Screen with a tabstrip control with 4 tabs.  It will let me select tab 1, tab 2, tab 3, and tab 4, but when tab 4 is selected, and i click another tab, the screen freezes, and will not allow me to get out, what is the problem?

    Can you send the code ,may after the tab 4 is selected ,you are not activating the tab or no screen is attached.

  • Creating TabStrip control using visual composer

    Hi,
    I am NW04 version for Visual Composer. I want to create a TabStrip control on which I want to show two table from a RFC. Is there any facility available to create this like NW2004s. I found from some posts that NW04 verson doesn't have capabilities to create listbox. Or is there any patches available and after applying we will get the functionality??? Or can I install VC for NW2004s and it will be compatible with EP 6.0??
    Please suggest.
    Thanks,
    SA.

    Use layers and set the correpsonding property. Tabstrip is one of the options in 2004.
    Mario

  • Oracle application server control white screen problem

    Hi,
    I have installed Oracle Application server 10g. Both the infra and mid tier are running from the
    same machine.
    I am able to login to application server control from http://riysvdwh-004:7777, but
    unable to login to the application server control from http://riysvdwh-004:7778,
    i can login to portal and discoverer from the second link, but when i click on"log on to
    Oracle Enterprise Manager 10g Application Server Control:" i get a white page and 5-6
    pipe symbols moving at the top left of the screen and i dont get the next screen.
    I have checked the setupinfo.txt file in midtierhome/install location and found out that
    the hostname in the database connection string is different, instead of hostname riysvdwh-004
    , it is riysverp-004,
    Use only SSL connections with this Oracle Internet Directory:No
    Database Connection String: riysvdwh-004:1521:ASDBDEV.riysverp-004:ASDBDEV.riysverp-004
    Use the following URL to access the Oracle HTTP Server and the Welcome Page:
    http://riysvdwh-004:7778
    i think this could be a reason why i am unable to login from port 7778.
    Is there a way to make this work.
    would appreciate some suggestions.
    regards,

    1) Look in the $ORACLE_HOME/install directory ... ports used for the various functions such as EM are usually listed in the portlist.ini file in each Oracle Home
    2) Ask in the App Server forum. There is an assumption that questions in the Database forum are primarily focussed on Database issues. <g>

  • Adding field to Table Control using screen exit

    Hi Folks,
    I have a requirement of adding a field in Table control of Standard SAP transaction also updating the same in standard SAP database table.
    The field is also not existing in the table, it is also added to the table using Append Structure.
    Will this be possible using some Screen Exit?
    Thanks in Advance.
    Punit

    Hi Punit,
    There are various screen user exits(QQMA0001,QQMA0008,QQMA0010,
    QQMA0011,QQMA0012) available for this transaction but all are related to adding a subscreen.So, I am not very sure whether we can modify a table control for this transaction. So, If possible if u r requirement still can be acheived with creation of a subscreen then it would do only if the exits which were mentioned above belongs to u r main screen..
    Regards,
    Swaroop

  • Problem in Tabstrip Control

    Hi All,
    i had created an Custom Infotype.
    In that infotype i had created Tabstrip control with 2tabs.
    Each Tab contain 4 fields.
    When creating( F5) a record in transaction PA30, it allowing me create a record and the record is available in Data base table.
    1. My doubt is, when Display the Record through F7 and Change mode (F6), Still the fields are in editable mode. But not in Display Mode ( Editable Mode ).
    How to Disable the Fields for this Tab Strip Control. I have not used any Group Field for this. Can we need to Main tain anything.
    But SAVE option is automatically disabled.Iam not able to SAVE when i press F7 but in Editable is the My Problem.
    2. And one more query is, when press F5 or F6 or F7 it is show the following message at End screen,i.e.
    Protected tab titles are not supported (tab MENU_TABSTRIP title PUSH1) . But MENU_TABSTRIP is My Tab Strip control text Name and PUSH1 is my Tab1 , Function code.
    How to remove this message.
    Points will be rewarded.
    Thanks,
    N.L.

    Hi,
    Try this ....In the Table Control, double click on a field. In the attributes make that field as output only...
    Hope it helps,
    Swathi

  • How to insert tabstrip control in module pool screen painter

    Hi all!
    plz tell e how to use tabstrip control in module pool screen painter.Also plz give me an example program using tabstrip control.

    To insert tabstrip just open layout of screen and press on the tabstrip button there .
    Use this souce code further to activate it .
    CONTROLS tabstrip TYPE TABSTRIP.
    DATA: okcode TYPE sy-ucomm,
    dynnr TYPE sy-dynnr,
    flag type flag,
    active like tabstrip-activetab .
    call SCREEN 100.
    *& Module USER_COMMAND_0100 INPUT
    text
    MODULE USER_COMMAND_0100 INPUT.
    data: lv_okcode type syucomm.
    lv_okcode = okcode.
    clear okcode.
    case lv_okcode.
    WHEN 'TAB1'.
    dynnr = '0110'.
    WHEN 'TAB2'.
    dynnr = '0120'.
    WHEN 'TAB3'.
    dynnr = '0130'.
    WHEN 'TAB4'.
    dynnr = '0140'.
    WHEN 'TAB5'.
    "check authorization, if authorization fails
    flag = 'X'. "set the global flag
    active = 'TAB1'. "store active tab in global variable
    dynnr = '0110'. "set the screen number
    WHEN 'BACK' or 'EXIT'.
    leave program.
    ENDCASE.
    IF lv_okcode(3) = 'TAB'.
    tabstrip-activetab = lv_okcode.
    ENDIF.
    ENDMODULE. " USER_COMMAND_0100 INPUT
    *& Module STATUS_0100 OUTPUT
    text
    MODULE STATUS_0100 OUTPUT.
    SET PF-STATUS 'MAIN'.
    SET TITLEBAR 'xxx'.
    IF tabstrip-activetab IS INITIAL OR
    dynnr IS INITIAL.
    tabstrip-activetab = 'TAB1'.
    dynnr = '0110'.
    ENDIF.
    "set the activetab explicilty here
    if flag eq 'X'. "from authorization failure
    tabstrip-activetab = active. "'TAB1'
    clear flag.
    endif.
    ENDMODULE. " STATUS_0100 OUTPUT

  • What are the uses of table control and tabstrip control

    can anyone tell me the uses of table control and tabstrip control

    Hi,
    table control is more comfortable for customizing.scroll bars all possible in this.where as it is not possible in step loops.
    check this example.
    PROGRAM ZBHTCTRL.
    TABLES: LFA1, EKKO.
    DATA: OKCODE1 LIKE SY-UCOMM,
    OKCODE2 LIKE SY-UCOMM.
    CONTROLS TABC TYPE TABLEVIEW USING SCREEN 1001.
    DATA: BEGIN OF ITAB OCCURS 0,
    MANDT LIKE EKKO-MANDT,
    EBELN LIKE EKKO-EBELN,
    BSTYP LIKE EKKO-BSTYP,
    BSART LIKE EKKO-BSART,
    END OF ITAB.
    MODULE USER_COMMAND_1000 INPUT.
    CASE OKCODE1.
    WHEN 'BACK'.
    SET SCREEN 0.
    WHEN 'NEXT'.
    SET SCREEN 1001.
    SELECT * FROM EKKO INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE
    LIFNR = LFA1-LIFNR.
    ENDCASE.
    ENDMODULE. " USER_COMMAND_1001 INPUT
    MODULE MOVE_DATA OUTPUT.
    EKKO-MANDT = ITAB-MANDT.
    EKKO-EBELN = ITAB-EBELN.
    EKKO-BSTYP = ITAB-BSTYP.
    EKKO-BSART = ITAB-BSART.
    ENDMODULE. " MOVE_DATA OUTPUT
    MODULE USER_COMMAND_1001 INPUT.
    CASE OKCODE2.
    WHEN 'BACK'.
    SET SCREEN 1000.
    ENDCASE.
    ENDMODULE. " USER_COMMAND_1001 OUTPUT
    MODULE STATUS_1001 OUTPUT.
    SET PF-STATUS 'MENU'.
    SET TITLEBAR 'TIT'.
    ENDMODULE. " STATUS_1001 OUTPUT
    MODULE STATUS_1000 OUTPUT.
    SET PF-STATUS 'DMENU'.
    SET TITLEBAR 'xxx'.
    ENDMODULE. " STATUS_1000 OUTPUT
    FORM ON_CTMENU_FORM1 USING CMENU TYPE REF TO CL_CTMENU.
    CALL METHOD CMENU->LOAD_GUI_STATUS
    EXPORTING
    PROGRAM = ' ZBHTCTRL'
    STATUS = 'CMENU'
    MENU = CMENU.
    CALL METHOD CMENU->ADD_FUNCTION
    EXPORTING
    FCODE = 'RX'
    TEXT = 'RECIEVE'.
    ENDFORM.
    FLOW LOGIC:
    PROCESS BEFORE OUTPUT.
    MODULE STATUS_1000.
    PROCESS AFTER INPUT.
    MODULE USER_COMMAND_1000.
    PROCESS BEFORE OUTPUT.
    MODULE STATUS_1001.
    LOOP AT ITAB WITH CONTROL TABC CURSOR TABC-TOP_LINE.
    MODULE MOVE_DATA.
    ENDLOOP.
    PROCESS AFTER INPUT.
    MODULE USER_COMMAND_1001.
    LOOP AT ITAB.
    ENDLOOP.
    for more info check this link.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac1d35c111d1829f0000e829fbfe/content.htm
    thanks
    Ashu.

  • Screen error in tabstrip control

    hi all,
    I'm practicing a program for Tabstrip control.
    it will be like this
    tab1           tab2
    number1    result
    number2
    number1 number2 result are of integer data types.
    now the problem is
    the program is giving result when I declare the above variables as char...that to with some limit.
    but if the varilable are of type int program is givng an error called screen error.
    why this is happening ?
    whats the solution for it?
    points assured,
    Usha.

    HI,
    try like this...
    1.goto that perticular Screen Element List, there you will find a tab General Attributes.
    2.In that change the Format Column for that perticular field from CHAR to INT1 ( by default it will take as CHAR ).
    now you will not get any error.
    Regards,
    Sathish Reddy.

  • Tabstrip Control Problem

    I created a form with a a two-tab tabstrip (using the wizard).  On the first tab is an ALV grid, on the second, a text field.  When I run the program and the first grid shows up with the ALV grid just fine.  When I click the second tab, however, the program just terminates.  I'm a newbie so it's probably something obvious.  Thanks in advance!

    hi ,
    look at this...
    http://help.sap.com/saphelp_nw04/helpdata/en/04/10f2469e0811d1b4700000e8a52bed/frameset.htm
    Tabstrip control
    check this test code...
    TABLES : VBAK ,VBAP.
    CONTROLS : TAB_STRIP TYPE TABSTRIP.
    CONTROLS : TAB_CNTRL TYPE TABLEVIEW USING SCREEN 0002.
    DATA : OK_CODE_0101(20).
    DATA : D_REPID TYPE SY-REPID,
    D_SUBSCR TYPE SY-DYNNR.
    DATA : D_VBELN TYPE VBAK-VBELN.
    TYPES : BEGIN OF D_STRUCT,
    VBELN TYPE VBELN_VA,
    POSNR TYPE POSNR_VA,
    MATNR TYPE MATNR,
    FMENG TYPE FMENG,
    NETWR TYPE NETWR_AP,
    END OF D_STRUCT.
    DATA : ITAB TYPE STANDARD TABLE OF D_STRUCT WITH HEADER LINE.
    DATA : D_WA TYPE D_STRUCT.
    *& Module GET_SCR OUTPUT
    text
    module GET_SCR output.
    IF OK_CODE_0101 IS INITIAL.
    D_SUBSCR = '0001'.
    ENDIF.
    D_REPID = SY-REPID.
    endmodule. " GET_SCR OUTPUT
    *& Module EXIT_MODULE INPUT
    text
    module EXIT_MODULE input.
    SET SCREEN 0.
    LEAVE SCREEN.
    endmodule. " EXIT_MODULE INPUT
    *& Module USER_COMMAND_0101 INPUT
    text
    module USER_COMMAND_0101 input.
    case ok_code_0101.
    when 'TAB1'.
    D_SUBSCR = '0001'.
    TAB_STRIP-ACTIVETAB = 'TAB1'.
    WHEN 'TAB2'.
    D_SUBSCR = '0002'.
    TAB_STRIP-ACTIVETAB = 'TAB2'.
    WHEN 'GET1'.
    D_SUBSCR = '0002'.
    TAB_STRIP-ACTIVETAB = 'TAB2'.
    ENDCASE.
    regards,
    venkat.

  • Multiple problems with control and screen sharing

    Hello,
    First of all, I am having a weird problem while connected to a G5 Xserve that is running OS 10.4.5 and ARD version 3.2.1. When controlling the screen, I am unable to type. It only types the character "a" or "A" whenever I type any letter. Numbers are fine. The kicker here is if I use a different vpn server connection into the same machine (vine server), I can type fine. Has anyone experienced this problem?
    My other issue is when attempting to connect to some clients using ARD, I cannot see thier screen. I receive an error message stating that Authentication failed. I can perform all other functions with ARD on those machines... but when trying to see thier screen... nothing. I can actually share my screen with them successfully though. They are not running any third-party vnc server which was my first thought.
    Thank you for any help you can provide.
    - Ken

    I got all mine working without using root or going to the machines.
    ssh into them and remove com.apple.RemoteManagement.plist with
    rm /Library/Preferences/com.apple.RemoteManagement.plist

  • Query about TABSTRIP Control within Sub screen

    Hi Expert,
    I have requirement like follows:
    In IW32->Enhancement Tab screen is as subscreen and No: 0900.
    Now I want to have 2 different sub screen say 0910 and 0920 each of this for different purpose according to
    Order Type as per clients requirement.
    Actaully I have developed screen 0900 already for some order type and now clients requirement changed i.e.
    there are 2 different groups of Order types (say Grp1 and Grp2)
    So, I proposed a solution for this as follows:
    In Enhancement Tab of IW32 according to group of Order Type (either Grp1 or Grp2) only you will be able to
    see fields for that perticular Grp either of 2.
    Technical Solution is like...
    1) I thought that I will create 2 subscreens say 0910 and 0920.
    2) In 0910 i will insert all those fields which are designed already in 0900 which is for Grp1
    3) and for Grp2 i will design 0920
    4) according to Order Type only 0910 or 0920 client will be able to see.
    Now I got stuck in between the screen development for 0920 because there are so many fields and i said to
    client that they will be able to see those fields in different Tab strips.
    I never worked on Tab Strip concept, I search so many forums and sites for Lesson on Tab Strip but not
    understood how to proceed as per my specific requiment.
    Please can anyone suggest me how to proceed further.
    Thanks in advance.
    Regards,
    Jay.

    There's no reason why you couldn't do it.
    A tabstrip control is simply made of a subscreen area and a "tabstrip" above, where each tab corresponds to a button/function code. You have 2 ways to define/program it, "local" or "server", the difference being a better performance with the "local" (interesting in slow WAN).
    In ABAPDOCU demos, you have 2 programs DEMO_DYNPRO_TABSTRIP_LOCAL and DEMO_DYNPRO_TABSTRIP_SERVER.
    Sandra

  • I bought my Mac Air 13' in August. Black screen problems constantly happens. I asked some of my friends who also use Air. They share the same experience. Overall, it is a pretty good computer. But it bothers me when I do work and it suddenly goes black.

    I bought my Mac Air 13' in August. Black screen problems constantly happens. I asked some of my friends who also use Air. They share the same experience. Overall, it is a pretty good computer. But it bothers me when I do work and it suddenly goes black. What should I do about it?

    without more information, I assume you mean a blackout from sleep issue.
    Go to system preferences > energy settings > raise the "turn display off" setting up to as needed, say 5 mins. or 10 mins.
    AND ...
    unchecked the "Put hard disks to sleep when possible" in both the battery and power adapter tabs.
    test it and check back

  • Table update problem in tabstrip control

    Hi experts.
    i have one tabstrip control having 4 tabs.
    in those tabs i am updating one table say ztable(database table).
    my problem is this is happening in pai of every tab.
    but what ever i am updateing table those changes will reflect in other tabs.
    where i have to write code like pbo or what i should do.
    what ever i am updateing in tab1 i have to see in tab2.what ever i have update i should see in tab3.
    but it is not showing the updates when we will go for other tabs.
    Thanks

    Hi,
    Please check the following things :
    1 . The Fucntion code type for each tab is blank
    2 . Same subscreen area is assigned to each tab
    3 . Corresponding subscreen is dynamically incorporated into the subscreen area CALL SUBSCREEN in the flow logic
    If you are not doing this, then you are scolling in SAP GUI, not in your program. In this case the values entered in TAB1 won't get reflected in TAB2.
    If this is the case in your program, fix the above three points. then it will work.

Maybe you are looking for