Talent Acquistion Management 9.0 / Data synchronisation

Hi there,
I have some questions regarding the talent acquisition manager in Peoplesoft V9.0
Especially the personal and profile data of internal employees who apply for any vacancy.
To add a new applicant, the user has the possibility to search for employees with the personal id. All data, linked to the personal id, such as personal information and profile information is copied to the application of the employee.
If the personal information changes (workforce administration), after the application of the employee, the changes will not be updated in the application information. Consequently, there are two different personal information for one and the same person in the system.
Only after the employee logs into self-service, and confirms with that the change of data, the updated personal information is also updated in the talent acquisition management.
But what happens when a client does not use the self-service, as my client? There is no process or batch, which synchronizes the data.
For the profile data (profile management) there is no data synchronization at all. Once the application for an employee is set, every update or change in profile is not updated in the application information for the employee.
Another question is, why every detail of the profile is copied to the application, but not the competencies.
If anybody has experienced the same, or does know any solution. Please let me know, this is a big issue for the client.
Thanks a lot

Jack,
Is the TREX delta indexing running and are the indexes up to date? Did this position(s) have their end date recently changed?
Might be worth trying to test using SE38 on program ESH_TEST_SEARCH to see what values are actually in the index.
If the data in the index is wrong -> schedule the re-indexing (recommend Luke's blog: Setting up NetWeaver Embedded Search (TREX) for SAP HCM Talent Management EhP4, 5 and 6).
If data is correct in index then this suggests an error in the TREX setup. Could be worth then querying with SAP via OSS.
Also, to answer your 2nd part ... if you want to add to the listing then you need to extend the TREX setup as well as the Nakisa configuration. I did once see an excellent article/blog on this but for the life of me I can't find the link! Anyone else got it?
Regards,
Stephen

Similar Messages

Sap E-recruiting ( Talent Relationship Management )

Hi
Why one candidate (internal or external) appears in the pool of talents and other no ?
I registered 20 candidates but only I can see 3 when i search in Talent Relationship Management
Can you show me the way please?
Thanks in advance. Sony

Hello,
unfortunately there is no easy way to tidy up a complete e-recruiting.
While for pure HR components there is a way to clear all infotypes through a report SAP once delivered to get rid of database entries which were accidently transfered with a client copy including customizing tables (all infotypes are for any reason type C tables), the business partner integration of e-recruiting blocks that way.
Also doing it manually is not easy, e.g. deleting a requisition can only be done for requisitions marked "to be deleted" and this is only possible in the manager scenario.
We once developed a report to clear a complete e-recruiting system without touching process supporting data like process templates or questionaires for a customer who tested on production to ensure propper set up and a then wanted to clear everything. This took quite some days to get this right - unfortunately I cannot hand this out, I hope for ur understanding here.
Of course you can try to develop such report on your own. Other way would be a new system setup with importing all transports you did so far. Or third just clean up what really bothers ongoing project.
For a production system I would go for new setup. In best case there is a data recovery possible you only have to import the transports. Developing an own report might take you longer than this.
If it is only the dev system I would get rid of all things which could disturb my developments by throwing dumps or slg1 entries. If it is only dev full cleaning is not always necessary. But of course this need quite profund knowledge of the application and the project itself.
Sorry that I cannot offer an easy solution for this problem.
Kind Regards
Roman

Talent Relationship Management for also external candidates

Hi Experts
Using portal as recruiter in e-recruiting I checked the option Talent Relationship Management in order to find out candidates from old job applications to detect new employees before any other expensive measures such as placing job advertisements.
However, the result of the searches reports me data from only internal candidates.But when I run the query through "candidates´ selection" I can search candidates through the external Job Applications and I can see their information there.
I checekd the status field of HRP5102 (0 -> profile locked, 1/2 -> profile released) but it didn't work.
What should I check in customizing to also reach external candidates from Talent Relationship Management pool?
Thanks in advanced.

Hello
Please note the description from the Overview for this SCN Space:
Official SAP Help Portal Community. Find comments on SAP product documentation (such as SAP Application Help, also known as SAP Library), and read best practices shared by the community.
Based do the above, I believe you posted your query into the incorrect SCN Space. Please use the Forum Finder for the New SCN document to find your product and post into that SCN Space.
With best regards,
- Ludek
SCN Moderator

Error loading Virtual Machine Manager 2012 and Data Protection Manager 2012 modules together

Hi.
Very strange issue: when i try to load together Virtual Machine Manager 2012 and Data Protection Manager 2012 modules - script fails. If first loaded Virtual Machine Manager 2012 module:
Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\ObjectModelCmdlet.dll because of the following error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property
for more information.
Loader Exceptions:
Could not load type 'Microsoft.Internal.EnterpriseStorage.Dls.Utils.AlertTypes.AlertEnum' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
At C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\Modules\DataProtectionManager\DataProtectionManager.psm1:2 char:14
+ Import-Module <<<< (Join-Path $cmdletDllPath ObjectModelCmdlet.dll)
    + CategoryInfo          : ResourceUnavailable: (:) [Import-Module], PSSnapInException
    + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand
If first loaded DPM 2012 module::
Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\Microsoft.SystemCenter.VirtualMachineManager.dll because of the following error: Unable to load one or more of the requested
types. Retrieve the LoaderExceptions property for more information.
Loader Exceptions:
Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineException' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Method 'get_BootOrder' in type 'Microsoft.SystemCenter.VirtualMachineManager.ClientObjectHWSettingsSourceAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have
an implementation.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Method 'get_BootOrder' in type 'HardwareConfigSettingsAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have an implementation.
Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.ServicingTypeValues' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.FabricCapabilityType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.SKUType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral,PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
At \\team\dfs\scripts\Admin\Scvmm\Move-VirtualMachine.ps1:103 char:16
+         Import-Module <<<< 'C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\psModules\virt
ualmachinemanager\virtualmachinemanager.psd1';
    + CategoryInfo          : ResourceUnavailable: (:) [Import-Module], PSSnapInException
    + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand

Vote if you have same problem:
https://connect.microsoft.com/PowerShell/feedback/details/873348/scvmm-and-scdpm-powershell-modules-cant-work-together

How do I manage my iCloud Data across my apple devices

How do I manage my iCloud data across various devices....like my iPhone 5 and Macbook

If you are using the same iCloud account on all your devices (as recommended), then you could manage your iCloud storage in "Settings > iCloud > Storage & Backup > Manage Storage" which would have effects accross devices.

Is it Possible to manage BP Master Data in all Currencies?

Hi,
I want to know that, how to manage BP Master Data in All Currencies like ( Dollar, Euro, INR )
Our Marketing Document shows all these Currencies when we punch it .
Plz reply me soon ................................................?
Thanks,
Jyotasna

Hi,
For the Multi-Currency Business Partner, all the transactions will be converted to Local Currency in whatever Foreign Currency these are entered in database.
The lead currency will be Local Currency.
You can check the same in the Demo database with already available BP which is in Multi Currency. The Aging Report will display the total outstanding in asterisk (****) for multi currency BP if BP Currency is selected.
Check out these things in the Demo.
Let us know if any more thing is unclear.
Kind Regards,
Jitin
SAP Business One Forum Team

How to configure Enterprise Manager in Active Data Guard?

Hi,
I have installed oracle 11g r2 rac with asm in two nodes. OS is hp-Unix.
I have installed oracle11g Active Data Guard using Single alone Database.
Both RAc and Active Data Guard works fine.
I have not configure Data Guard Broker.
Question: How to configure Enterprise Manager in Active Data Guard?
Thanks
Solaiman

http://www.gokhanatil.com/2012/04/manage-your-existing-data-guards-with.html

POA SP3 and Data Synchroniser 1.2.3 Build 882

Hi All,
Last week we updated to Groupwise 8 SP3, running on Netware 6.5 with no issues. Since that update we have had major issues with Data Synchroniser 1.2.3 Build 882.
Every 2 to 5 hours all the IOS devices ( we only use IOS devices) will throw up password messages and not connect. When the password is entered it is unable to verify and connection is not restarted.
Restarting the Data Sync Server does not restart the sync. You have to restart the POA to get the sync working again.
On the POA there are no obvious log messages at the time the sync fails, all the SOAP login in and log outs from the Data Sync server just stop. Sometimes the password requests will come up and if you wait 10 minutes and enter password it will accept and sync will start again.
The only new message I see occassionally since the update is the following:
Error: [0000] on Debug:2 hdebug=0, htemp=0
But even this is not regular.
When you restart the POA you will in most instances have a SOAP handler that is waiting to terminate which requires server restart to clear.
I have run a full cwcheck on all the databases, a DOM and PO database check and recovery to no avail. I have checked all the POA settings against the recommended in the SP3 docs.
I am out of ideas? Any help/thoughts will be much appreciated as this is frustrating.

Originally Posted by blofts
Hi All,
See the following Thread and TID which is what I am experiencing as well, seems to be all related:
TID7010410
POA SP3 Feedback
I have lodged a Support Request with Novell as per the TID, but have been advised the pacth is not ready yet as it needs testing, there is some discussion of this in the thread above. I asked about ETA which they advised is unknown but is a high priority. Novells suggestion was to backgrade to SP2HP2 if you cannot wait for fix.
We are having restart our POA 1 to 2 times a day at present.
Brad
We do have a build that we believe fixes this issue. If you have an SR open, please contact your technician and ask them for build 803-102712. If you do not have an SR open, for tracking purposes we would need you to do so. As this is a bug for which there is no public patch at the moment, the cost of the SR would be credited back.
Pam

How to set the Data Synchronisation mode for ADF BC component?

Hi All,
How to set the Data Synchronisation mode for ADF BC component
Thanks
Raghavendra

Can you clarify what you mean by the data synchronization mode?
If you mean the Sync Mode, then in 10.1.3 you set this property by:
1. Selecting your DataBindings.cpx file
2. Expanding the "Data Control Usages" section in the structure window
3. Selecting the ADFBC-based data control
4. Setting the "syncMode" property in the property inspector.

User Exit Triggered during Campus Management Student admission data created

Hi Exports,
This is jnana ranjan working as a campus management implementation project.
Here we are impl student admission process workflow and i want trigger my event through user exit. I am new in user exit please guide me how to find user exit for CM and how to implement this. If you have abap code for similar requirment then please send me through my mailid: [email protected]
Please help me this is urgent requirment for my University client.
Advance thanks you.
Regards,
Jnana

Hi,
Can any one please let me know the user exit triggered during campus management student admission data creation and .
Thanks ,
Jnana

Data Synchronisation - cannot see log files

Hi,
when I run the data synchronisation process it completes normally, but when I try to view source log / destination log / data synchronisation log they all give me the same message in the output file =>
"Unable to download file because of an error or the file wasn't found. Please contact your system administrator."
The version is 11.1.2.1.0.83
Our server OS is windows 2008 r2.
This feels like a security issue on a directory, can anyone tell me which directory I need to look for, and what rights the middleware would need to be able to view these files?
with thanks,
Robert.

I think the logs will be generarted under <MIDDLEWARE_HOME>\user_projects\<instancename>\tmp
Cheers
John
http://john-goodwin.blogspot.com/

Managed Beans and Data Access Object

I have a question / need help understanding how to configure backing bean and model objects so that memory and object creation/deletion is done as efficiently as possible.
1. I have a .jsf page with a form and a commandbutton that submits the form inputs to a backing bean (enrollispbean is backing bean)
<h:commandButton value="Enter" action="#{enrollispbean.insert}"/>
2. The backing bean is used for form handling - the insert() method is used to read the data fields from the form and create a SQL string that will be submitted to a model object, DbInsert, that is used as a generic data access object that connects to the database and insert the SQL string:
public class EnrollIspBean {
private String beanvar1="";
private String beanvar2= "";
// DbInsert is data access object
private DbInsert dbinsert = new DbInsert();
public String insert (){
String sqlstmt;
sqlstmt = "INSERT INTO ispmain VALUES(beanvar1, beanvar2,..)"
dbinsert.insert(sqlstmt);
return "success"; }
3. DbInsert is the data access object that contains a method, insert(), that accepts a sql string to insert into the database. This method contains the code to obtain a connection from the database connection pool and then execute the sql statement (note: error checking code not shown):
public class DbInsert {
public void insert(String sqlstmt) throws SQLException {
Connection conn = null;
GetDBConnection getdbconnection = new GetDBConnection();
PreparedStatement stmt = null;
conn = getdbconnection.getdbconn();
stmt = conn.prepareStatement(sqlstmt);
stmt.executeUpdate();
stmt.close();
conn.close();
return;
Where I need help understanding is how to set up the scope for the managed beans and data access object. Currently, I have the backing bean within the session scope (using the facesconfig.xml file). My main question is how to set up the scope for the Data Access Object - currently I do not have it as a managed bean within facesconfig.xml. Instead I am creating a new instance within the backing bean:
private DbInsert dbinsert = new DbInsert();
Is this the best way to do this? Will the DBInsert object now be tied to the session scope of the backing bean (i.e., when backing bean is deleted, the DbInsert object will be deleted from session scope as well.)
Ideally I would like the data access object to be available as a shared object throughout the life of the application. When I was programming using a servlet approach, I would have created a servlet to load on startup. Now that I'm using java server faces, I'm confused about the scope / how to efficiently set up a data access object that I want to be available to all backing beans in the application.
tnanks for any help understanding this.
Tom

I was thinking about setting the data access object as application scope so that it can be used by an backing bean to execute sql statements.
If I do set it as application scope, however, if I do this, do I still need to declare a new instance of the object from within each bean that uses the object?
For example do I need to declare a new instance of the data access object from within the bean? or, should I assume that there is always an instance of the bean available in the application scope, and if so, how do I reference it from within the bean?
Bean Code:
public class EnrollIspBean {
// DbInsert is data access object
private DbInsert dbinsert = new DbInsert();
Finally, I understand performance may be an issue if I have one instance of the data access object available in the application scope - is there a way to make multiple instances available in the application scope?
thanks

Master Data synchronisation between two Solution Manager systems

Hi all,
does anyone know if it is possible to synchronise master data (smsy, ibase and such) between two Solution Manager systems with standard jobs?
Thanks!
Regards

I asked a likewise question on the OSS earlier and I was told
"Use MDM" (which is a separate product and must be licensed separately).
Markus

Funds management cube getting data from 4 ods, data not seen in cube

Hello all,
I am working on funds management cubes (0PU_C02 and 0PU_C03). These two cubes get data from like 7 or 8 ODS. Can someone tell me which are the ODS which feed to respective cubes. I have the mappings done but i am getting very confused.
In the ods 0PU_O44 there is RLDNR for Ledger and I can see that data in ODS but when i run load to cube I dont see the ledger data (its direct mapping there are no routines or rules).
Is there any sequence with wihic we have to load the data?
Thanks
Message was edited by: Raj M

Hi Raj,
I was going thru the forums who has knowledge in Public sector when i came accross ur forum.Can i get your email id..i have some questions to ask regarding student administration.
thanks.

How can i restore my data synchronised from a serv...

I use Nokia C3-00, And in My country synchronisation with server is not available except i perform phone switch or with a PC...But in thesame country of mine there is a server people use to synchronise...And when i tried it on my phone with the settings given to me...I synchronised my contacts,notes and calender...and the phone said 'synchonisation sucessfull' but after i restored my phone coz it had an error..and restoring it deleted my data(contacts,notes etc)...Now my question is, how can i restore my data(contacts,notes) that i synchronised ? Coz i checked d phone...i did not see an option to restore d data.....And if i can't, i'm sorry but nokia put that 'sync with server' feature just for fun ...

TSNA - My system crashed 1/2 way through opening up Parallels. I use Parallels for Quicken & Quickbooks only. My system locked up & I had to power down to get any response on the screen. When it started back up I got a screen that said Restore from Time Machine, Safe Startup (or some such words) and one other choice. NONE of which would do anything. - No response to any clicking, entering, up down etc. I called over my Apple friend and he could not get it going,. Ended up having to Reload O/S from the startup disks and reformat my hard drive. Reformatted because I wanted to get rid of Parallels which has painfully slowed down my entire system. I never keep it open unless I am working with Quickbooks or Quicken. Therefore I had decided to start using Boot Camp anyway. So I would have had to reformat my hard drive to do that regardless of this freeze up of my system.
This whole thing has taken days to get my documents off Time Capsule. Time Machine would then not restore to my "new" or reformatted hard drive, so all the files on the Time Capsule were hidden. Total nightmare !
Because now I can't get iPhoto APP back on my system as it is not available and have to use the new PHOTO which I hear is not good.

Talent Acquistion Management 9.0 / Data synchronisation

Similar Messages

Maybe you are looking for