Target/Actual Comparison

Dear expert,
I have analysis one of my Target/Actual Comparison report for a Production Order.
I have the target cost displaying well in the report comparing to the actual.
However, for Cost of Goods Manufactured line item is display value 0.00 and not displaying any correct value. It should display the actual quantity X Cost Estimate.
I have run the cost estimate for the finished goods without error.
Can someone give me a hand on this?
Thank you so much.

Hi Christian,
Sorry, my earlier question is incompleted.
I am missing Target cost for Cost of Goods Manufactured in the Target/Actual Comparison Report.
The actual figure is good.
Just missing the Target cost for COGM.
Thank you. Awaiting for your reply. Appreciated.

Similar Messages

  • KKBC_PKO  Target/Actual - Comparison

    Dear all,
    I am trying to understand this report:
    Cost Elem    Cost Elem(Text)                                 Target Cost    Act.  Cost    Target Qty    Act. Qty
    94300100     Machine Cost                          7,889,080     30,551,718     148.646     204.793
    94300300     Labor Cost                            11,455,243     28,749,100     148.646     204.793
    94300500     Electricity Cost                      1,538,485     12,353,917     1,337.813     1,843.133
    Could you pls help me to clarify:
    1) Act. Qty : actual qty which we backflush in PP module?
    2) Target cost comes from where?
    3) Act Cost = Act Qty * Actual price?
    4) Target Cost = Target Qty * Actual price?
    Thank you very much for your support!
    Cao Huy

    Hi,
    1) Actual Qty. - its actual production qty (say monthly or for a period used for report)
    2) Target cost (per unit)  & Target Qty- it is  decided at the time of budgeting for the year. It is then uploaded to the system.
    3) Actual Cost - as you said it right. it is actual qty * actual cost
    4) Target Cost (total )  - it is target qty * target cost (per unit)

  • Financial Statement: Plan/Actual Comparison (EhP3)

    Hi,
    I need to use the report Financial Statement: Plan/Actual Comparison (0FIGL_M30_Q0002).As i check in SAP Help, shows the report for this data source (0FI_GL_50) which is not availabe in ECC6.HELP.SAP shows the data for this report is extracted from 'FAGLFLEXP' table.To extract this data source SAP ask to implement package3.I would like to know how to extract data from the table without upgrading package3 or any other ways to implement this report.please specify the steps how to get the data source into BW.
    Tq.

    Hi
    these reports are available in BW from EhP3 onwards... You need to implement the EhP3 package and you get lot many good reports in Finance....
    When there is a std solution from SAP, I wont recommend to do any other development in this regard
    BR, Ajay M

  • EhP5 Report: Actual/Actual Comparison Between Different Ledgers

    Dear all,
    Hoping that someone here has faced the same challenge and found a solution...
    My client wants to see a side-by-side comparison of the financial statements for several ledgers; ideally three, but two will do.
    It appears that EhP5 includes an enhancement of the standard actual/actual comparison report which allows a comparison between two ledgers. However, we are running EhP4, and an upgrade is unlikely to happen very soon. Do you know whether the report is available separately? Our search for a separate SAP note was unsuccessful.
    Our other alternative would be to develop a report ourselves, but if a standard solution is available, that would feel rather daft...
    Thanks in advance!

    Thanks for the advice - as the system would not let me create versions for these non-FISL ledgers, I assumed it was not possible to run the report for them at all.
    Unfortunately, I do not have the actual/actual comparison for two different years built in, nor the financial statement version, so we may still have to develop a new report (as per project standards, in BI rather than ERP)...
    Kind regards

  • Request Got Deleted From 0PP_C01(Planned/Actual Comparison Order/Material)

    Hi experts,
    I am a newbie in the BW area.
    We have 0PP_C01(Planned/Actual Comparison Order/Material View) , 0PP_C03(Plan/Actual Comparison Operation/Work Center View) and 0PP_C05(Plan/Actual Comparison Material Consumption) activated in our production system.
    Few days before one data error happened during data load and accidentially, that particular request got deleted from the system.
    When we tried to load data again, it is not allowing since the request is missing and the update mode is delta update.
    Can any one guide me to retrieve the data back to the system??
    Thanks alot in advance
    Shobin

    Hi,
    You can try using PSA if that request it's still there.
    Otherwise, you will need to regenerate that request in source system (by filling setup tables with parameters) and update BW with a full load.
    Hope this helps.
    Regards,
    Diego

  • S_PL0_86000029 - Financial Statement: Plan/Actual Comparison

    Dear Sir,
    We are using ECC 6.0 NewGL split functionality in FI. We are using Fiscal Year Variant V3.
    I have done Cost Centre planning for the period "8 i.e. for the month
    of November" at Version 1 and this is properly getting updated at the
    Profit Centre level.
    I have not done the planning for the period "9 i.e. for the month of
    December" till now.
    But when I execute the report- S_PL0_86000029 - Financial Statement:
    Plan/Actual Comparison  for the period 9 to 9 i. e. December, the
    system is giving the Cummulative amount of planning till the month of
    November (period 1 to 8) as Planned amount for the period 9 even if I
    give period 9 to 9 in the selection criteria.
    Basically this report should not show me any planned value in planned
    column for the 9th period as I have not done any planning for the 9th
    month till now.
    Please confirm whether this report (S_PL0_86000029 - Financial
    Statement: Plan/Actual Comparison ) is cummulative report, even if we
    select a particular period in the selection criteria? If this report is
    of cummulative nature is there any other report through which we can
    see the planned amount of a particular profit centre for a particular
    period.
    Plz help ...........we need this report very urgently.
    Thank & Regards,
    Bijay Kumar Deo

    Please check Tcode FAGLGCLE. -  Activate Update of plan line items

  • Target/Actual/Planned Costs inProduction Order

    All,
    Can any one explain with example how planned, target,actual cost are calculated for a production order. and also when exactly these are recorded.
    Thanks in advance
    Sivaram

    Hi Sivaram
    Target Costs is Std costs for actual goods delivered
    Actual Costs are for actual cost of material and activities for actual delivered stock
    Here, delivered stock is same in both only the costs consdiered are diff
    The diff between target and actual costs is posted to variance. 
    Goods movement is done with actual price of raw material generally.  If u hv price contrl S for RM then it is at standards and all variances are only related to quantity.
    Actual costs are compared with standard costs of goods delivered to stock and varainces are calculated for the production order
    Regarding scrap costs - it should be separate line item.  It depends on many other settings in BOM, Routing, MM and Cost comp structure.  Depending on where the scrap is defined calculations are done
    If u have defined planned scrap, and is part of cost comp structure, u can get plan vs actual scrap costs
    You can also have scrap as not part of cost comp structure and record only actual scrap costs. 
    Please assign points if the above clarifies further as a way to say thanks

  • Plan / Actual Comparison Report - S_PL0_86000029 is not showing one month

    Gurus,
    The TCode, S_PL0_86000029 when being run for just one month, e.g. August (08.2008), it shows the figures for the whole year.
    Being the first year on SAP; the month this went GO-LIVE was October.
    Data before that since 01.01.2008 till 30.09.2008 was uploaded.
    How do we just break it down to one month?
    This is quite important.
    Thanks.
    Edited by: Bhatia on Oct 16, 2008 10:34 PM

    Hi Rau,
    Could you please me How to Upload the GL or Open Item Balances on Month to Month Basis? for this we still use FB01 for Initial Upload?
    My Client is giving the balance for last year Monthly with daily Transactions with past Posting dates obviously,do I need to Upload with same Posting dates or with Current Posting date?
    For reporting Purpose My Client would like to see Monthly Balances of Open items for Initial Upload,"is this same as Month to Month Upload you advised above"?
    What is the Difference b/w Month to Month ORr Just one Amount as total balance uploaded to SAP? which is Best Practice before Initial Upload?
    Thank you ,
    Paarthaa...

  • Can you help me with a Cost problem in an Order?

    Hello SAP experts, i have a question regarding orders and their costs if i go inside an order and i go to the menu then ->Goto->Costs->Analisys-> and then choose the layout ->Target/Actual Comparison, in this layout there is a column that says
    Total Target Cost and Total actual cost, i would like to know is what data does the system use to calcule those values, i know that one value is the amount of material that was charged to the order, but i would like to know from where does it take the other value the cost value so it can reach that number, thank you in advance

    Hi,
    In simple words:
    Target cost = Plan price * Actual qty
    Actual cost = Actual price * Actual qty
    Now where does the price come from... it depends on the valuation variant which is used for the order type. Normally it is the standard price from the material master which you can see in Accounting - 1 view or Costing - 2 view.
    The actual quantity is the qty of a component which has been issued to that order.
    So to get a clear picture, take a material which you see in the cost analysis view of that order & open the material master. Check the price for that part, multiply it with the qty issued & your query should be clarified.
    Revert if you face any issues.
    Regards,
    Vivek

  • Incoming orders key figure / booking

    Hello together,
    I am new to SAP.
    Together with a group of colleagues we have to solve several tasks in the SD Module. Most of them are done. But with the CO-Integration we are struggling.  We are looking for the key figures with are created when you save an incoming order (total order value?). Can  you tell us where we can find this figures as well as the corresponding bookings?
    The second point is the target/actual situation of an  order position. Is this the structure which you get if you click on the status button in VA02 /VA03? If yes where is the connection to CO, if not where could we find the target/actual comparison.
    Thank you
    Jan

    Hi Eduardo,
    thank you for your quick answer. We are solving this tasks in the IDES system for training purposes - the function itself should be activated. Do you know where we can find the  posting of the incoming order (in the SAP Easy Access, not in IMG)?
    For clarification purposes the translation of the tasks:
    1. when saving an sales order the  "incoming order value" is posted to the CO. Where can you find it?
    2. Where can you find the plan/actual comparison on an order position?
    Thank you
    Jan

  • Process Order Costing Report

    Dear All,
    From Report S_ALR_87013127 i required target/actual comparison report for Multiple Order .
    I am going to report home page and enter the multiple order and execute report on the result screen get the order list
    and now select all order and go to colorful checker box at header (Report call button) for order target / actual report but system is giving me a error message "Select only one order or order item"
    I want to download multiple orders detail list at a time how it is possible from report "S_ALR_87013127" or if any report available in to the system than pls guide me
    and if report is not available then any table or structure available in the system from where i fetch data and develop a Z report
    Regards,
    Murari Shah

    hi murari..
      You can use AUFK & AUFM to develop a z report for all orders list.
      kkumar

  • Process Order Costing Report Requirement

    Dear All,
    From Report S_ALR_87013127 i required target/actual comparison report for Multiple Order .
    I am going to report home page and enter the multiple order and execute report on the result screen get the order list
    and now select all order and go to colorful checker box at header (Report call button) for order target / actual report  but system is giving me a error message "Select only one order or order item"
    I want to download multiple orders detail list at a time how it is possible from report "S_ALR_87013127" or if any report available in to the system than pls guide me
    Regards,
    Murari Shah

    Hi Murari
    This report can take you to each single order at one go...
    If you want to download all the Prod orders in excel with detailed itemization (i.e. Each BOM Component, Activity Qty, etc), I doubt any report in SAP would help you.... You can take help of your ABAPer and develop a new report
    br, Ajay M

  • Process Order Costing Report S_ALR_87013127

    Dear All,
    From Report S_ALR_87013127 i required target/actual comparison report for Multiple Order .
    I am going to report home page and enter the multiple order and execute report on the result screen get the order list
    and now select all order and go to colorful checker box at header (Report call button) for order target / actual report but system is giving me a error message "Select only one order or order item"
    I want to download multiple orders detail list at a time how it is possible from report "S_ALR_87013127" or if any report available in to the system than pls guide me
    Regards,
    Murari Shah

    Hi Murari
    This report can take you to each single order at one go...
    If you want to download all the Prod orders in excel with detailed itemization (i.e. Each BOM Component, Activity Qty, etc), I doubt any report in SAP would help you.... You can take help of your ABAPer and develop a new report
    br, Ajay M

  • Values not appearing in Controlling reports

    Hi Gurus,
    For following reports I am not getting any values .Is I am missing any configuration.My client needs to be resolved on top priority.
    S_ALR_87013139 - Target/Actual/Production Varainace - Cumulative
    S_ALR_87013140 - Target/Actual/Production Varainace - Periodic
    S_ALR_87013142 - Target/Actual Comparison - Cumulative
    S_ALR_87013143 - Target/Actual Comparison - Periodic
    S_ALR_87013145 - Plan/Actual Comparison - Cumulative
    S_ALR_87013146 - Plan/Actual Comparison - Periodic
    S_ALR_87013148- Variance  Catergories Cumulative
    S_ALR_87013149- Variance  Catergories Periodic
    Regards,
    Nitin Amritkar

    Nitin,
    I would suggest you to close this thread here post this to CO-Forum for better response.
    Regards,
    Prasobh

  • Variance analysis report doesnt have any values

    Hi Gurus,
    For following reports I am not getting any values .Is I am missing any configuration.My client needs to be resolved on top priority.
    S_ALR_87013139 - Target/Actual/Production Varainace - Cumulative
    S_ALR_87013140 - Target/Actual/Production Varainace - Periodic
    S_ALR_87013142 - Target/Actual Comparison - Cumulative
    S_ALR_87013143 - Target/Actual Comparison - Periodic
    S_ALR_87013145 - Plan/Actual Comparison - Cumulative
    S_ALR_87013146 - Plan/Actual Comparison - Periodic
    S_ALR_87013148- Variance Catergories Cumulative
    S_ALR_87013149- Variance Catergories Periodic
    Regards,
    Nitin Amritkar

    These reports run on summarized values. Please run KKRV for summarization by plant for the given periods.

Maybe you are looking for

  • The correct way to move files up a level in Finder?

    I understand that there isn't a 'cut' feature in Finder (very strange) So what is the correct procedure to cut/move a file & paste/move it up one folder level? (or up a few levels?) Power Mac G5 Dual 2.3, 20 Cinema Display   Mac OS X (10.4.3)  

  • Iphone 4 from AT&T store

    has anyone recieved anything other than "in progress" on the order site if they placed an order through an AT&T store on the 15?

  • Suggestion for Pricing Type and Pricing Exchange Rate Type

    Dear All, Good Day, what would be your recommendation to maintain Pricing type and Pricing exchange rate type for below process.  1. Invocie. 2. Cancellation of Invoice. 3. Return Invoice. 4. Credit Note. 5. litigious Invoice. Best Regards, KSK

  • Accidentally registered CS4 with incorrect e-mail

    I purchased a student license for CS4 Design Premium (Education Version) roughly 4 years ago and temporarily deactivated it with the intention of moving it to a new PC. However, I recently re-activated it because I needed to use it for an assignment

  • Is it possible to deploy a EJB in runtime?

    I wanna develope a program in java wich deploy a bean at runtime, having the .ear, and all the other files, the container running on, and so on. Are API's available for performing this func ?