EhP5 Report: Actual/Actual Comparison Between Different Ledgers

Dear all,
Hoping that someone here has faced the same challenge and found a solution...
My client wants to see a side-by-side comparison of the financial statements for several ledgers; ideally three, but two will do.
It appears that EhP5 includes an enhancement of the standard actual/actual comparison report which allows a comparison between two ledgers. However, we are running EhP4, and an upgrade is unlikely to happen very soon. Do you know whether the report is available separately? Our search for a separate SAP note was unsuccessful.
Our other alternative would be to develop a report ourselves, but if a standard solution is available, that would feel rather daft...
Thanks in advance!

Thanks for the advice - as the system would not let me create versions for these non-FISL ledgers, I assumed it was not possible to run the report for them at all.
Unfortunately, I do not have the actual/actual comparison for two different years built in, nor the financial statement version, so we may still have to develop a new report (as per project standards, in BI rather than ERP)...
Kind regards

Similar Messages

Idoc data comparison between different R/3 clients.

Hi ppl ,
Is there a way idoc comparison can be done between different clients without going
by Segment by Segment comparison ?
I have a requirement wherein i have thousands of idocs in QA system and i need to
compare those with the ones in PROD system. The segments in the idocs may vary
depending on the data that flows from the third party system which will post idocs in R/3.
So, the segment wise comparison of data is also ruled out .
Do we have any standard reports which will help in achieving this purpose ?
Please let me know how the idoc data comparison can be carried out .
Regards,
Nick.

Hi Nick,
There is no standared tools available for comparing the data of two idocs.
By using beyond compare s/w you can check the data, but the thing is you have to download the idoc data to file format.
By using Idoc_xml_transform function module you can download idoc data to xml format, after you can compare.
Check this
http://download.cnet.com/Beyond-Compare/3000-2242_4-10015731.html
Regards
Ramesh

Object Comparison between different systems

Hi to all,
any of you have made a program to compare object/object versions between diferent systems (with RFCs).
Can you tell me wich Function Models and tableshave you used.
I found a very usefull Function Model SVRS_GET_VERSION_DIRECTORY_46 very usefull for my purpose but i depared myself with a strange problem. The table VRSD used in this FM have all the Objects in the System but when i tried to transport a request between 2 diferent Systems no new entry was added to VRSD in the target system so SVRS_GET_VERSION_DIRECTORY_46 is no usefull.
Any one knows if there is any customizing relative to this table or any process to catch this transported objects in the target System?
There is one entry in E070 but here thre is no reference for Object versions.
Many thanks and any help will be very Helpfull.
Thanks In advance
PPaiva

Hi Pedro,
Can you let me know which object you are comparing? Were you not able to do remote comparision for that object?

Comparison insertion/search time between different Collection class

Hi,
Does someone know where I can find a clear an complete comparison between different JAVA class which implements interface Collection?
I want to compare:
- elements insertion time
- elements search/removal time
Thank you very much in advance
Diego

from wikipedia: Its purpose is to characterize a function's behavior for very large (or very small) inputs in a simple but rigorous way that enables comparison to other functions.
meaning if I ask how quick an algorithm is you might say it completes in 10 seconds but the next time you run it it might take 8 seconds. It kind of depends on what else your computer is doing/ how fast your computer is or how much data you are putting through ie if the puter has little memory it might need to use virtual memory which will have an effect on your performance.
Big O notation identifies how much work has to be carried out. The easiest example is a simple search of an array:
for (int i = 0; i < array.length; i++) {
if (array[i] == "weijewr") {
return i;
}Where n represents a number of elements:
This takes O(n) (big Oh of N) as potentially you need to look at each element.
if you were to write a standard bubble sort it would be O(n2) as potentially you need to iterate the array once for each element.

Report actuals till last closed month

Hello Experts,
We have a requirement to report actuals till last closed month(which is August for now) but reports are not created in such a way that it shows different time data for different versions at the same time.Adding time dimension in column axis makes the report static and thereby we ultimately looses its dynamic nature.
For example, In one of the report,Profit center(expansion is dynamic) and Category dimension(one is actual and another one is always based on user selection) are in column axis and time selection is at the top.It retrieves data for both the versions but for the same time period.But the requirement is show actuals till last closed month and other comparison version based on time selected by the user.Adding time dimension in column axis makes the report static because then profit centers needs to be hardcoded as well.
Our main goal is not to touch the existing reports because then we loose the dynamic nature of it. Is there any way to do it with minimal changes in Admin or Reports without losing its dynamic nature.
Any help will be much appreciated.
Many Thanks
Sim

Hi Vadim
Thanks for replying.Last closed month means the month which has been recently actualised. Like for this year, August actuals are already in and so this month is closed. Right now, the definition in our input form is 8+4 which means 8 months are actualised and available for reporting but rest of four months(Sept till dec) are still open for planning.
Now, in my report, I have Profit center and category(2 members, one is always actual and another is always based on user selection) in column axis and data is being retrieved for both versions but for the same time selected by the user.For example, user has selected time as 2014.12, even the actuals will also show till 2014.12 which is incorrect.
Because this way they are also able to see some of the september actuals(which has not been fully posted in our system as this is month half) and therefore, they are not able to see correct data.
I am using EPMAxisoverride and Profit center and category dimension is dynamic in column axis and adding time dimension will make the report static(because I dont want to see two times(like 2014.08 and 2014.12) for Actual version and two times for comparison version) and thereby losing its dynamic nature.
I have attached two snap shots for your refrence(first one is what exists in the system and another one what we are looking for).
Is there any way to bring data in such a way that we dont even have to touch any report.
Regards
Sim

Is there any actual difference between Release, Debug and Debug Local configurations in SSRS project?

Is there any actual difference between Release, Debug and Debug Local configurations in SSRS project?
For example in VC++ Debug build would have all optimization turned off (by default) and included additional Debug information in executable.
Since there is no executable produced for SSRS - is there any actual difference between configurations? Or are they only for the purpose of deploying to different destination servers?

Hi JoeSchmoe115,
The Project Configuration and Configuration Manager is a feature supported by Visual Studio, on which Business Intelligence Development Studio or SQL Server Data Tools is based. We can use Configuration Manager to create and manage sets of project properties
in project configurations. You are right that the project configurations is only for deployment purpose in a Report Server project.
Reference:
http://technet.microsoft.com/en-us/library/ms155802.aspx
Regards,
Mike Yin
TechNet Community Support

Target/Actual Comparison

Dear expert,
I have analysis one of my Target/Actual Comparison report for a Production Order.
I have the target cost displaying well in the report comparing to the actual.
However, for Cost of Goods Manufactured line item is display value 0.00 and not displaying any correct value. It should display the actual quantity X Cost Estimate.
I have run the cost estimate for the finished goods without error.
Can someone give me a hand on this?
Thank you so much.

Hi Christian,
Sorry, my earlier question is incompleted.
I am missing Target cost for Cost of Goods Manufactured in the Target/Actual Comparison Report.
The actual figure is good.
Just missing the Target cost for COGM.
Thank you. Awaiting for your reply. Appreciated.

Financial Statement: Plan/Actual Comparison (EhP3)

Hi,
I need to use the report Financial Statement: Plan/Actual Comparison (0FIGL_M30_Q0002).As i check in SAP Help, shows the report for this data source (0FI_GL_50) which is not availabe in ECC6.HELP.SAP shows the data for this report is extracted from 'FAGLFLEXP' table.To extract this data source SAP ask to implement package3.I would like to know how to extract data from the table without upgrading package3 or any other ways to implement this report.please specify the steps how to get the data source into BW.
Tq.

Hi
these reports are available in BW from EhP3 onwards... You need to implement the EhP3 package and you get lot many good reports in Finance....
When there is a std solution from SAP, I wont recommend to do any other development in this regard
BR, Ajay M

Report, actual value of Limit-item POs

Hi!
We would like to list all PO-items for a plant / company code that contains item categorr B (limit), where the "actual" value of the invoiced amount is shown for each line.
Is it really so that one need to combine tables EKKO, EKPO and ESUH (ACTVALUE) to achieve this ?
I know there are report where POs are listed and you can click on the PO to show details, but we would like a list report to be able to summarize the actual values for a range of POs
brgs ziggy

Hi,
You can not achieve your requirement directly in reporting transactions, please create a query.
You can list service entry sheets in ML84 and services (which have been created against PO limits in entry sheets) in msrv1-msrv6.
I would recommend you to use in ME2S the planned / actual comparison.
Regards,
Edit

Actual cost showing different

Hi Expert,
The actual cost showing different in two report cji3 & cn41.Plz help me.
Thanks

I did whatever you have suggested me.but i have not found desired result.
scenario is- In cn41 report
suppose the actual cost in wbs is 6649095
But under this network & activity level the actual cost is 6461522
In cji3 report at network activity level the actual cost is 6461522 & the actual cost of wbs is also 6461522
Plz guide me why cn41 report showing different actual cost at wbs level.
regards

S_PL0_86000029 - Financial Statement: Plan/Actual Comparison

Dear Sir,
We are using ECC 6.0 NewGL split functionality in FI. We are using Fiscal Year Variant V3.
I have done Cost Centre planning for the period "8 i.e. for the month
of November" at Version 1 and this is properly getting updated at the
Profit Centre level.
I have not done the planning for the period "9 i.e. for the month of
December" till now.
But when I execute the report- S_PL0_86000029 - Financial Statement:
Plan/Actual Comparison for the period 9 to 9 i. e. December, the
system is giving the Cummulative amount of planning till the month of
November (period 1 to 8) as Planned amount for the period 9 even if I
give period 9 to 9 in the selection criteria.
Basically this report should not show me any planned value in planned
column for the 9th period as I have not done any planning for the 9th
month till now.
Please confirm whether this report (S_PL0_86000029 - Financial
Statement: Plan/Actual Comparison ) is cummulative report, even if we
select a particular period in the selection criteria? If this report is
of cummulative nature is there any other report through which we can
see the planned amount of a particular profit centre for a particular
period.
Plz help ...........we need this report very urgently.
Thank & Regards,
Bijay Kumar Deo

Please check Tcode FAGLGCLE. - Activate Update of plan line items

HT4623 I updated to the latest iOS and now YouTube and the Ap store are no longer on my phone. Also, not all my music will play and if I play a song it will actually play a different song while displaying the one I chose. Any ideas how to fix this?

I updated to the latest iOS and now YouTube and the Ap store are no longer on my phone. Also, not all my music will play and if I play a song it will actually play a different song while displaying the one I chose. Any ideas how to fix this?

You have to download the individual youtube app now. It is no longer a nataive ios app from apple in ios6

Whats the actual difference between Business system and Business service

whats the actual difference between Business system and Business service

Business System
1) Business system is a logical system, and there is an importance on physical existence of the system.
2) Also SLD entry is required.
3)It is generally used for SAP applications, this is just a general prinicple followed but not mandatory.
4)This is defined as part of the SLD and is a physical system whose parameters are well defined.
5(Business systems refers to the physical systems, for instance the R/3 system. You define the business systems in the SLD
Business Service
1) You use a Business Service, when you do not have the System details of the the partner system to which you want to communicate. i.e. you have not configured the partner system in SLD.
2) Business Service is an Absract Unit with Sender and Receiver Interfaces,In this case you need to explicitly add the message interfaces while doing configuration in ID.
3) It is generally used for NON-SAP applications, this is just a general prinicple followed but not mandatory.
4) This is not defined as part of SLD and whose technical parameters are not completely known.
5)Business service is used when the message is not addressed to a business system. It is used mostly in B2B scenarios.
Also go through these links and threads...
http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Business service or Business system??
Business Service vs Business System in Integration Directory.
Best Regards

FI document on actual distribution between segments

Dear Experts
I want to do actual distribution from segment to segment.
I thought I could do it on FAGLGA35.
However, nevertheless I did activation the real-time integration,
FI document was not generated.
FI document is not generated on actual distribution between segments?
Kaneko

Hi
If you are talking about real time integration between FI and CO, please check when you define the variant, cross segment field is checked. Also,please check document type and Ledger group is defined.This variant must be assigned to company code in customizing.
Rgds
Harsh

Actual difference between exterprise oracle 9i/10edition & standard edition

hi,
i want to know the actual difference between exterprise oracle 9i/10edition & standard edition.
plz reply me.
thanks,
regards.

For 10g
http://www.oracle.com/technology/products/database/oracle10g/pdf/twp_general_10gdb_product_family.pdf
For 9i
http://www.oracle.com/technology/products/oracle9i/pdf/o9i_family_features.pdf
HTH
Girish Sharma

EhP5 Report: Actual/Actual Comparison Between Different Ledgers

Similar Messages

Maybe you are looking for