Target Stock Level ( Method 1 - Time Dependent) in SNP

Hi Guys,
I am not able to use the Target Stock level method 1 ( Time Dependent Target Stock level method ) in SNP heuristics. Ideally if I assign the above target stock method for a particular Product Liocation combination, I should get he keyfigure row ' Target Day's Supply' editable when I open the planning book and select the above Product Location combination in the shuffler, by which I can manually enter the target day's supply for any bucket. But I am getting it greyed out and not editable.
Pls help.
Thanks
Ameet

I am hoping you have ensured that in planning book design the key figure is defined as editable. Make sure that while designing the planning book, you copy the SAP standard planning book while configuring the target stock level method.

Similar Messages

Macro 'Target stock level (BW)' is inactive

Hi Experts
I got an error in a background job "Macro 'Target stock level (BW)' is inactive"
Kindly help me how to resolve it
Thanks
Samurai

Hi Samurai,
As the error suggests that macro is inactive - Can you please check the macro in corresponding planning book/data view in Macro Workbench in transaction /SAPAPO/ADVM
Check there if the macro is inactive (Red Mark) - If inactive, then please activate the same and then check the background job by running it again.
Hope it helps.
Regards,
Alok

Stock Level over time

I would like to build a query that reports the stock level for each posting period over time. I found these two tables that appear to have a structure for this data, but when I look at these tables I see that they are empty:
S197 Periodic storage location stock
S198 Periodic plant stock
Is there a better place to get this information?
Thanks,
Kent

MMBE tells the current stock at this time. I want to get historical stock information over time. I am looking for a table that holds this information versus a TCODE. I know many TCODES to get the data, I just can't find a table that stores the data.
Thanks,
Kent

Replenishment upto max. stock level during SNP heuristics run.

Hi Experts,
As per the requirement from client, we need to configure the setting of replenishment upto max. stock level during SNP heuristics run.
I am using below settings in R/3 for achieving the expected results.
(R/3 ) MRP1 u2013
Lot size                       HB               Replenish to maximum stock level
Maximum stock level      20,000
(APO) Targ.Stk Lvl Methd   5 u2013 in APO u2013 product master -   lot size tab.
Still, after heuristics run, the requisitions are getting created equals to forecast value. It should get generated as max. stock level maintained.
Could anyone share their experience regarding this? Am I missing some additional setting?
Inputs are highly appreciated!
rgds/Jay

Dear Jayprakash ,
If the requirement is that you have to replenish upto a certain stock level then instead of maintaining the Max Stock level you can simply maintain
SB : Safety stock from product master
and in the Safety stock field maintain the quantity as desired ( in this case 20000 ) . This probably will solve the problem in your case . You may not require to maintain Max stock level .
Target stock level in heuristics also works fine with the following settings
make sure you maintain
Target stock level method as =5
In Maximum Stock level = maintain the quantity desired ( 20000 in your case say )
do not maintain any safety stock method keep it blank .
then location heuristics generates PR according to the the maximum stock level.
If still it is not working plz let me know what other settings you are maintaining probably we will find a way out .
Hope it helps .
Thanks
Debsankar

Max stock level as safety stock from material master while running SNP Heuristic

Hi Experts,
Our user wants to consider max stock level as safety stock from material master while running SNP Heuristic, not the actual safety stock.
Is there any possibility for this setup?
--Kishore

Hi Kishore,
With the given details I suggest that the user can maintain the max stock level values directly in safety stock field of the material master for all materials to be planned by SNP heuristic (keeping the max stock level field blank). Then this safety stock field (which has actually the max stock level values) will update the safety stock values in APO product master and in turn can be considered for SNP heuristic.
Note: The max stock level field in APO product master is used by SNP heuristic only when the target stock level method is maintained as 4, 5 or 6. Since your requirement is to use max stock level as safety stock, so it does not look like that you will be using these target stock level methods or the max stock level field in R/3 and APO. So, this can be left as blank in both R/3 and APO.
Please let me know if this helps.
Regards,
Umesh

What exactly is Update method Master data attrib with a Time dependency ?

Hi Experts,
I have a Update rule in which i have an Update Method "Master Data Attrib of " with Time dependency
basically we are loading (update rule of )   0PAYROLL AREA ,
              at Master data attribute of we have 0EMPLOYEE
              at Time Dependency When reading Master Data END radio button is checked
              frm it is mention as 0CALDAY.
please explain what is function of 0calday here?
I understand that 0PAYROLL AREA is a attribute of 0Employee and since from R/3 we are getting only 0EMPLOYEE so we are filling it from 0employee but what is the significance of 0CALDAY here?
Regards,
RG

Hi RG,
It fills the valid value of 0PAYROLL for a particular 0EMPLOYEE in a particular time frame.
Elaboration.
Say Employee          Payroll                  Valid from          Valid to
        RG                    1000000                 01.01.2007        31.12.2007
        RG                    2000000                 01.01.2008        31.12.2008
        RG                    3000000                 01.01.2009        31.12.2009
The if your transaction data has RG employee in it with a transaction on 0CALDAY = 12.05.2007 then the valid payroll at that time would be 100000.
On Calday 05.05.2009 your payroll would be 300000.........
So for different days different payroll values would be valid.
You require calday to find out which payroll value is valid in the timeframe of a transaction.
In your update rule it is bringin the value of valid attribute value for the time of the transaction.
Hope it helps,
Regards,
Sunmit.

Time dependent Hirerachy data not display at query level

Hi all,
I have loaded a time dependent hirerachy from flatfile,it showing same data as in flat file at RSMO,where as if I am executing query ,report displaying in hirerachy structure format,but DATE-TO and DATE-FROM are not displaying .
Ex:On ZEMPLYOE i have created ZMANAGER as hirerachy,report giving ZMANAGER&ZEMPLOYEE details correctly in hirerachical format,but Date-to and Date-from are not displaying at report level,where as entair data is loaded to ZEMPLOYE without any error.
If any one has come across the same situation,what are additional steps need to have take.
your help will be appreciated
Regards,
Praveena.

Yes, date-from and date-to are not meant to be displayed in the report.
Let me take an example to tell the purpose.
Suppose your hierarchy displays employees managerwise.
If you create hierarchy telling
from 01-01-2009 to 31-03-2009, employee E1 will report to Manager M1
from 01-04-2009 to 31-05-2009 , E1 will report to M2.
then, until March, E1 will be displayed under M1 node in the report, and in April and May, he will be displayed under M2 node.
So, we create hierarchy only once, but they change in the report depending on the month.
Hope this helps.

Real time stock levels

Hello
Could anybody help me find a solution to my problem please?
I would like a report to run that tells me the (exact) stock levels of all materials that I can save as xls.
If it can be done automatically that would be even better.
Thanks

Is there anyway to change the format to a simple table with each item having its own line?
e.g material - description - stock level
this would make it easier to view when converted to spreadsheet?
Edited by: ripps12 on Feb 2, 2011 10:05 AM

Hide attributes based on stock level

How can I hide the attributes of a drop down based on their stock level? I would like to hide all of them that are out of stock.
==
John

Hi,
You should add something along this code snippet to the end of your product large layout. What this does is it uses the 2 tags - tag_attributes_json and tag_instock_json to work out which attributes have 0 stock, find them in the drop down and hide them. The only thing you would need to work out is how to target the elements themselves, this may vary depending on your page structure, so $('.catProdAttributeItem select option[value="' + attributes.variations[key].optionIds[0] + '"]').hide() might need to be changed accordingly.
Here is the code snippet:
Object.prototype.getKeyByValue = function (value) {
    for (var prop in this) {
        if (this.hasOwnProperty(prop)) {
            if (this[prop] === value)
                return prop;
attributes = {
    tag_attributes_json
stockers = {
    tag_instock_json
for (var key in attributes.variations) {
    if (attributes.variations.hasOwnProperty(key)) {
        if (stockers.byVariation[key] == 0) {
            console.log(attributes.variations[key].optionIds[0]);
            $('.catProdAttributeItem select option[value="' + attributes.variations[key].optionIds[0] + '"]').hide()

Target and Actual Lead time in MCP1 report

Dear Experts,
In MCP1 report, what is Target Lead Time and Actual Lead Time. How it is calculated?
Thanks in advance for your valuable replies.
Regards,
Jejesh

Hi,
                                                                                Target lead time
On the operation level, it is the time period between the scheduled
    input date at the work center (target input) and the latest scheduled
    finish of the operation.
The target input date is calculated through the scheduled execution
    finish of the previous operation.
On the order level it is the time period between the scheduled start and
    the scheduled finish.
and
                                                                                Actual lead time
At operation level, the time between the input date at the work center
     and the completion confirmation date (the total from queue time,
     execution time and move time).
When calculating, the input date is determined via the completion
     confirmation date of the preceding operation. The process-dependent
     wait time of the preceeding operation is subtracted.
At order level, the time between the reported start date and the finish
     date (the total from execution times and transit times of the operations
     as well as the order floats before and after production).
Regards,
Rajesh

Effect from build time dependent 2 attribute in info object master data

Dear all,
i creat time dependent 2 attributes in info object master data (ZCURRLUM) which use in info cube. after that i open workbook or query, it has short dump which error message
   "UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
   "CL_RSBOLAP_BICS_SERVICES======CP" or "CL_RSBOLAP_BICS_SERVICES======CM003"
   "HANDLE_UNCAUGHT_EXCEPTION"
Question: info object master data can't use more than a attribute time dependent???
i use in BI 7.0 level 14
thanks for your help
regards,
Joy

Hi Chandamita Sarmah,
I copy error code to you from line 1 to line 28
METHOD handle_uncaught_exception.
data:
    l_r_program_error TYPE REF TO cx_rsbolap_program_error.
data: lBExDebug type rs_bool.
GET PARAMETER ID 'BEXDEBUG' FIELD lBExDebug.
if lBExDebug = rs_c_true or CL_RSTT_TRACE=>GET_TRACEMODE_CURRENT_TRACE( ) = rstt0_c_tracem
Break-point for debugging, e.g. during running a trace
    break-point. "#EC NOBREAK
endif.
Subcall?
if P_RFC_CALL_DEPTH > 1.
Forward the exception
    subtract 1 from P_RFC_CALL_DEPTH.
    DATA: l_r_x TYPE REF TO cx_no_check.
    TRY.
       l_r_x ?= i_r_exception.
      CATCH cx_root.
        CLEAR l_r_x.
    ENDTRY.
    IF l_r_x IS INITIAL.
      RAISE EXCEPTION TYPE cx_rsr_propagate_x
        EXPORTING
          previous = i_r_exception.
    ELSE.
    RAISE EXCEPTION l_r_x.
    ENDIF.
endif.
All exceptions should have been caugth -> X-Message
Thanks a lot for your help
Joy

Routine to read time dependent master data

Hi Experts,
I got a requirement, where I have to read time dependent Master Data.
I need to write a field level Routine on "DEPTID" and to read from EMPLOYEE Master and Dateto=31.12.9999. I need to get last department ID for each employee.
Below are Source fields mapped to target InfoObjects in my transformation.
EMPID            mapped to 0EMPLOYEE
STARTDATE mapped to 0DATEFROM
ENDDATE      mapped to 0DATETO
EMPID            mapped to DEPTID
Could any one please help out with the abap code to fulfil the above requirement?
Appreciate for your quick response.

Cris,If you follow the approach given above will also give you the latest dept id only.I would suggest to give this a try in dev system with some test data and see if that works or not.
Still if you feel that code has to be written then map end date and dept id to the dept id.
Code should be something like this:
IF source_fields-enddate = '99991231'.
Result = deptid.
Regards,
AL

How to create time dependant master data table in R/3?

Hi gurus,
I am new to BW.I try to execute the 'Time dependant Attribute' into BW.in my scenario my source system must give me the data like "salesrep ID,Manager ID,Date to,Date from,Sales region". I like to know how to define this master data in SAP R/3(Source system)?. Give me the steps to create master data table in R/3.
Manager may change periodically.even i need to maintain all the changes in R/3.
Thanks & Regards,
Bharath

built-in type method means.,
there is no need to create data element and domain objects seperately for each and every field of the table which ever you are creating, system will implicitly fix the size based on the data type you selected....

Schudling agreement with time dependent excise base value taking wrongly.

Sub: in migo excise base amount is not changing as per the scheduling agreement type LP ( time dependent ).
I have created the scheduling agreement type LP with time dependent.
I have maintained the price value in two validated period i.e
01/07/08 to 31/07/08 price is 100 rs.
01/08/08 to 31/08/08 price is 200 rs.
I have maintained the delivery schedule on
15/07/08 of quantity 1 nos.
When I am doing the goods receipts for the scheduling agreement on
Document date I am giving 15/07/08.
Posting date I am giving 15/07/08.
I am giving the posting date in the excise also 15/07/08.
After item ok.
When I will the excise base value it is taking 200 and also excise duty is also calculating on 200.
When I will post the document
The stock account and GR/IR account is taking 100 only
And excise duty is posting for rs: 200 only
Why the excise base value is not changing as per the validity period.
What setting I have to do the change the excise base value as per the validity date maintained in the time dependent .
regards
jrp

Hi
I was wondering in J1ID there is validity from date only no to date, Pls tell where you have maintained excise base amount based on from to period.
In J1ID if you maintain any new accesable value for the later date it will consider that.
Rgds
Srini

How to pick consignment stock @ FIFO method when involved multiple vendors

Dear Guru s ,
I need some information/ logic on how to pick consignment stock @ FIFO method when involved multiple vendors (who supplies consignement goods) .
1)We have tried to determine the vendor @ FIFO method from the material document date & time with 101 K mvmt type
2) when we check MSEG table we are unable to get the current stock updates .For example Vendor A stock is showing 60 KG in MMBE , but MSEG is showing only 45 KG for the same vendor & storage location .
Can anyone provide me the logic / info on the same.
Thanks
Anil

Hi Anil
MMBE will show you total stock, your logic is correct , you can go for MSEG , but you need to add opening stock for that material for the period.
Suppose you are looking for report between 2nd august to 10 august , then you need to take opening stock on 2nd august and then add all goods receipt( 101 k) between 2nd to 10th and you will get correct stock on 10th ( same as MMBE)
Note : I am assuming that current date is 10th august. If you want to see stocks on particular date then go for MB5B.
Now as per your requirement , you can identify goods movement based on FIFO , follow same logic , pick time and date from MSEG for 101 k movement type.
Regards
Ravi.

Target Stock Level ( Method 1 - Time Dependent) in SNP

Similar Messages

Maybe you are looking for