Task Scheduled Start Date with RAPI

Task Scheduled Start Date with RAPI
Is it possible to have a scheduled start date for a task in a service that is generated by RAPI, and, which does not have any authorizations/reviews? RAPI seems to throw the request into the service delivery moment without calculating the tasks even if I supply a date onload (in a field for the task start date to use). It works fine if there are authorizations or reviews, which is expected, but I can't get it to work without them. Thanks!

Fascinating. As a workaround could you try throwing in a dummy authorization? For example, externalize it with ServiceLink dummy and autocomplete adapters, or keep it internal, but conditional with a condition that would always be false.

Similar Messages

Return the scheduled start date from one task to a custom field for all tasks

Hi all
I am trying populate an entire custom task date field with the scheduled start date of one of the tasks. I thought the easiest way would be to:
1) identify the date I need with a custom task flag field set to 'yes'
2) create a formula to look for the 'yes' flag in that field and populate the custom task date field with it.
This worked only for the task where the flag was set to yes (task #36) and the rest of the 49 tasks returned an error message. I'm unsure of how to set this up so that the date with the 'yes' flag populates in this column on
all 50 tasks.
This would also need to scale for situations where there were more or less than 50 tasks.
Thanks in advance...
Using MSP 2010 Pro

ShelleyBrodie,
That's because the syntax of your formula isn't quite what you intend. The correct syntax is:
IIf( expression, truepart, falsepart )
For your case that converts to:
IIf([Flag1],[Scheduled Start],{not sure what you want for the false part but I assume is is not Scheduled Start})
Note, the "Yes" for Flag1 is implied, so the first part (i.e. Scheduled Start) is the truepart, but you don't give a value for the falsepart (i.e in both cases your formula is looking for Flag1 to be "yes". Let's say you want the Date1
field to have the Scheduled Start date if Flag1 is "yes" and to have today's date if Flag1 is "no". Then the formula will be:
IIf([Flag1],[Scheduled Start],[Current Date])
However, As I indicated in my previous response, you won't be able to do what you described in your initial post by using a formula. Are you now trying to do something different?
John

Process Order Schedule Finish date before Schedule Start date

On rare occasions, the process order Schedule Finish date is before the Schedule Start date. This causes an error on the APO system when the process order is CIF to APO. Does anyone have any ideas how this occur?
Thanks.
Best regards,
Sandy

Rajesha, thank you for your reply but it doesn't solve my problem.
Let me restate my scenario:
I start a process order and both the basic and scheduled finish dates are the same, June 1.
At some point, shop floor tells me they will be late and cannot deliver until June 15.
I need to update a date in the system so the ATP and the MRP planning runs have correct information for promising customers, I will update the Basic Finish date with June 15.
I also need to keep the original June 1 date in order to measure the shop floor performance to the production schedule to measure how early or late the order was delivered. How can I keep the original finish date or how can I measure if a process order is early or late??
Thank you for your help,
Greg

Filters on CSWP not working when Scheduling Start Date sets Immediate Value

In Sharepoint 2013, When users sets value of "Scheduling start date" to "Immediately", the filters does not work correctly.
I have checked many forums where it is mentioned that If you set scheduling Start date to Immediately, internally the Scheduling Start Date is set to 01/01/1900.
When i use query in content search webpart as publishing date is between "Scheduling Start Date" and "Scheduling End Date" so it fails. it does not displays filtered data.
Please provide some resolution for this issue.
I have tried using calculated field wherein we can put formula to get value for Immediate value and then use it in Filter expression. but I need another approach related to "Scheduling Start Date" Column. i.e can we remove the Immediate radio button
or can we restrict user to use specific date only?
Thanks in Advance.

This is a new one on me.
It's a server program to interface with QuickTime and some other problematic services.
If you use video or 3D in Photoshop Extended, you probably need it.
Sounds like you are correct in that it has to do wtih Quicktime. Do you have PS extended?

Scheduling start date and end dates

Hello Gurus,
I am trying to understand the schedule start date and schedule end date functionality in Plant Maintenance. I do understand the basic start and end dates. Currently I set up u201C3.Do not adjust basic dates, dep rqmts to order startu201D and set the scheduling type as u201CForwardsu201D . Please note we donu2019t do any capacity planning or leveling.
So my question is, why the scheduling start date is defaults to the basic start date for forwards and scheduling finish date defaults to basic finish date for backwards ? I tried adding couple of operations and save the work order. It did not change anything in schedule dates.
Do we really need to care about scheduling dates if we donu2019t use capacity planning ?
Please advise
Mahee

Hi,
As per priority, final dates would be calculated as we will define the duration based on the priprity. Either current date or basic date only applied to Scheduling start date.
You can change the scheduling start date so that based on priority, final date would be calculated.
Regards,
Maheswaran.

Basic Start Date and Schedule Start date

Dear All,
In a Preventive Maintenance order generated through IP30, I am getting Basic Start Date and Schedule Start date as different dates. For all other orders those date as coming same. I am using forward Scheduling. Can any one of you please tell me what would be the problem?
Regards,
Babu R

[SAP Note on Scheduling - Note 45433|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=45433]
Regards,
Maheswaran.

PP DataSource 2LIS_04_P_ARBPL - Incorrect extraction of latest scheduled start dates (SSAVD)

Hi experts,
we use the SAP Business Content Standard DataSource 2LIS_04_P_ARBPL "Work Center View PP" and need the latest scheduled start date each production order operation.
In the production order operation overview (t/code CO03) on the ERP-side we have the expected latest scheduled start (Source AFVGD-SSAVD)
But in the DataSource 2LIS_04_P_ARBPL (PSA-Table) we become the incorrect latest scheduled start dates (DataSource field SSAVD)
Any ideas or experiences why the latest scheduled start date not up-to-date?
Many thanks and best regards,
Michael

Hi,
I have tested the scenario again...
At the header level of test production order 1000381 I have changed the basic dates (Start/End) from 22.04.2014 to 24.04.2014.
As a result the start dates at operation level also changed...
After the above changes I have extracted the Data. The Delta-Queue (RSA7) for the relevant DataSource 2LIS_04_P_ARBPL looks nearly good.
For the both operations 20 and 30 the delta update for the field "Latest start date" (SSAV) works correct. But the delta update for the first operation "10" not processed.
Is it possible that the delta update only works for specific system status? Or any other ideas?
Many thanks and best regards,
Michael

Early schedule start date, early schedule finish date

I want early schedule start date, early schedule finish date and project cost plan in my report. This is a PS requirement. In the standard cube (0PS_C02) I can find actual start date and actual finish date. Has anybody used early schedule start date and early schedule finish date in the reports? If yes then did you get it using standard cube/ODS or you went for enhancement?

HI,
He have to go for few tables in which u can find all the data.
Firstly u have to enhance the datasource .
First go to table AFKO here you insert AFUNR (Order Number) this table you will get AUFPL .
Then take AUFLP and go to AFVV table and insert AFUPL . you will get all the activites and all dates of each activity for example early start date ,early finish date, foirecost date etc.
Thanks and Regards
Dinesh

Calculation of start date with backward scheduling

Dear all,
I am facing an issue related to backward scheduling. I have requirement in which whenever backward scheduling is used, system should calculate from last activity to first for calculation of schedules which is fine. But when running scheduling i am giving finish date as input and system is always using start date as current date and not calculation last date from last. For example if i input finish date as 15 feb 2015, and there is only one activity of 15 days, system should count start date from 1 feb 2015. Please help me how i can achieve this, currently its always putting start date as current date.
My current settings are--
Project definition- WBS Scheduling profile- Backward scheduling
                              scheduling scenario- Free scheduling
Network-      Planning type- basic dates
                    Scheduling type- Backward
Please help.
Thanks

Dear all, this issue is resloved. Reason was that by default i am using forward scheduling for all project but in case of backward scheduling, user change schedule type at project definition and network. I was removing start date and putting finish date and running scheduling. Missing step from my side was i need to first copy date from top to down than run scheduling again.
Thanks.

Get all the back schedule start date except last and current month

Hi All;
Below gives me last month schedule start
scheduledstart >= DATEADD(mm,DATEDIFF(mm,0,GETDATE())-1,0)
AND scheduledstart < DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0)
Below gives me current month schedule start
scheduledstart >= DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()), 0)
AND scheduledstart < DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE())+1, 0)
I need to find all the schedule start excluding current month and last month
Any help on this much appreciated
Thanks
Pradnya07

Hi,
You could use NOT BETWEEN with the start date of last month and the end date of the current month:
AND schedulestart NOT BETWEEN DATEADD(mm,DATEDIFF(mm,0,GETDATE())-1,0)
AND DATEADD(MONTH, DATEDIFF(MONTH,
0, GETDATE())+1,
0)
Hope this helps,

UDI OSD Task Sequences started failing with 0x80070002 error in SCCM 2012

This is kind of long, but here goes...
We built a UDI task sequence in SCCM 2012 (with MDT integration) that we were testing for deployment of a couple of different Win7 images. We customized the UDI experience thru the UDI wizard and XML file and OS deployment worked as expected
thru the task sequence (testing on Hyper-V VMs). Recently, this UDI TS started failing with error 0x80070002 during what appears to be the "Use Toolkit Package" step. This is after the OS image has already been laid down and after the ConfigMgr
client has been installed/configured. The SMSTS.log reports "Failed to open the task sequence key HKLM\Software\Microsoft\SMS\Task Sequence. Error code 0x8007002" Among other errors...I will post the entire log below...
After the error during deployment, Win7 will boot normally, however, you have no network connectivity and it appears the proper network driver didn't get loaded in the OS. Combine this with the fact that the TS should have joined the machine to our domain,
but you can't login because no network.. Im not sure if the network issue is a product of the TS failing early or the actual cause of the TS failure.
Anyway, I attempted to build another UDI task sequence using the same boot image and toolkit/settings packages, but am experiencing the same error during deployment. We have a few OSD task sequences built without UDI and those all still work just fine.
So, I am at a loss for where the root problem lies. Any suggestions or assistance would be greatly appreciated.
Here is the entire SMSTS.log and BDD.log...
https://skydrive.live.com/redir?resid=D65B1C4362892A26!110&authkey=!AKu5mOvDsXaEgvc
Thanks
Richie Tenhet

your failure does appear to be network (driver or otherwise) or dns related and it cannot contact the management point FQDN just around the time where it should download and execute the
Use Toolkit Package step...
"Starting Task Sequence Engine . . . "
"Non fatal error 0x80072ee7 in sending task sequence execution status message to MP"
"Start executing an instruciton. Instruction name: Use Toolkit Package. Instruction pointer: 83"
"unknown host (gethostbyname failed)"
"sending with winhttp failed; 80072ee7"
"Tried all the available http based locations. SMB based locations will be attempted now."
"Failed to resolve the source for SMS PKGID=P0100015, hr=0x80070002"
"Failed to run the action: Use Toolkit Package.
The system cannot find the file specified. (Error: 80070002; Source: Windows)"
that said, check that the package referenced above actually exists and is the correct source version on your distribution points, also verify (press F8 and check can you ping the FQDN of your management point) that you have network connectivity
around the time of the failure.
Step by Step Configuration Manager Guides >
2012 Guides |
2007 Guides | I'm on Twitter > ncbrady

Process/Production Order WIP Reverse on Month starting date with postiing d

Hi Experts,
Is it possible to reverse the WIP of Production/Process Order at month starting date eg. 01/07/09. Posting date & Document date should be: 01/070/09.
In my current project production is batch management system. Some of the batches start at month ending days (Eg. 29/06/09) for we calculated WIP at dated: 30/06/09.
My Client wants to reverse that WIP next day, month starting hours Eg. 01/07/09 but while reversing the WIP system is posting the WIP reversing doc. posting date is 31/07/09.
Same batch which started production on 29/06/06 is closed at 03/07/09 as well as goods received same date. FG Stock A/c updated in accounting books.
At the same day If I print my trail balance system showing the Stock value double (WIP stock as well as FG stock)
First Month
Eg. Process Order WIP at 30/06/09                              : 50000/-INR
Second Month
      WIP Reversal Posting date:31/07/09 by system     : 50000/-INR
      FG Stock received at 03/07/09                               : 50000/-INR
If I Print Trail Balance on 03/07/09 system shows        : 1, 00, 000/-INR (based on Posting date)
Which is wrong..
Please tell me the way for Change the Posting date of WIP reverse document. OSS guys are replying as consulting issue.
I am waiting for your valuable reply.
Thanks & regards
Bhagiradha

In KO88, CO88 Select Menu bar Extras-> Posting date
Enter Posting and execute
Thanks for Rajesh (SAP Labs)
Thnaks & Regards
Bhagiradh

Access to BPM Task/Process CONTEXT data with the BPM Java API

Dear all,
is there a possible way to extract the content data from a process Instance? We want to read out all the data of the current intstances from a backend system. The API CE7.3 SP3 supports only (or we didn't find it) Instance Header data (like start-time,..)
Regards,
Christian

Hi
There's no straight way to retreive process instance context variables.
But In my mind, there is a hack way - find appropriate tables in oracle db, where BPEM stores information about process instances and read it with jdbc.

Problem in scheduling agreement dates with 2LIS_12_VCSCL extractor

I am using 2LIS_12_VCSCL extractor to get the order fulfilment report.
I am using ODS as an infprovider and on BW 3.5.
Scenario on Sale Order screen - VA33 [ Scheduling Agreemnent ]
Sales doc   Item Line-No     Qty      Del NO    Req-Date         Actual GI Date
    100          10      1            10          222        5/10/2008        5/10/2008   ( this is the only item that is delivered)
     ---            --       2            10                       6/10/2008
     ---            --       3            10                       7/10/2008
This Scenario when we view the data in rsa3 by running 2LIS_12_VCSCL
Sales doc   Item Line-No     Qty      Del NO     Req-Date        Actual GI Date
     100       10      1            10           222         5/10/2008         5/10/2008
        ---       2            10          222        6/10/2008          5/10/2008
        ---       3            10          222        7/10/2008           5/10/2008
Note that the delivery no is assigned to the unschedules schedulines(ie; these are open schedulelines that have not been delivered, but the extractor is assigning the first delivery no to all these schedule lines)
We are confused and do not understand if this is how this extractor works . what we actually expected to get is only one recored for which the delivery has been made.
like :
Sales doc   Item Line-No     Qty      Del NO    Req-Date        Actual GI Date
       100       10      1            10          222        5/10/2008        5/10/2008
the other two lines should not get extracted. If this is a bug in the extractor program please point us to the OSS notes or the fix that can be applied.
Else if this is how this extractor works please suggest the fix that can be applied on the BW side to extract only the first record (ie; the schedule line record for which the delivery has been done)
Greatly appreciate help on this issues.
Thank You,
Edited by: Swordfish on May 12, 2008 1:09 PM
Edited by: Swordfish on May 12, 2008 1:21 PM

Hello,
I think we have the same problem. Data pulled over to BW has alot more records for a single delivery.
Anybody have any thoughts on this.

Scheduling Start Date in Past for PurchReq settings

Experts,
for work orders the range of how many days I allow the system to schedule in past is located in OPU3 and OPU5, Section: Scheduling Control for Detailed scheduling; Field Start in Past.
Where are these settings for purchase requisitions located ?
Thanks in advance
Jörg

HI
Go to T code OPPQ Maintain plant parameter > select your plant then > Start in Past> select check box for start in past also chekc as suggested by Mr Mangalraj In T code OMIT.
Setting form OPPQ will overwrite in OMIT.
Check at your end.
Regards
Anupam Sharma

Task Scheduled Start Date with RAPI

Similar Messages

Maybe you are looking for