TCP with classic under os X

Hi,
I have installed a firewall for panther 10.3.9,
and am noticing that classic applications open blocked TCP
sockets; (For security to prevent being hacked again through classic apps, they are blocked by ipfw from communicating.)
When I do a:
netstat -A -p tcp
from the Terminal app, it returns (in part):
<pre>
Active Internet connections
Socket Proto Recv-Q Send-Q Local Address Foreign Address (state)
17f7744 tcp4 0 0 editedout.65 mc-in-f147.g.http ESTABLISHED
329f30 tcp4 0 0 *.57504 . 11
329f30 tcp4 0 0 *.57501 . 11
</pre>
Notice how the state is 11 instead of something human readable like IDLE, CLOSED, LISTEN or anything normal.
These TCP sockets stick around forever, and I don't know
how to get rid of them without rebooting all the time.
What does 11 mean as a TCP state, and since I have listed the -A option for the TCP control block, is there any way to get OS-X to list the PID of the application owning that TCP port? lsof does not seem to know about these, nor does fstat. Google turns up nill for some very complicated searches, except someone else who has the same problem from
a few years back.
ibook Mac OS X (10.3.9)
ibook Mac OS X (10.3.9)
ibook Mac OS X (10.3.9)
ibook Mac OS X (10.3.9)
ibook Mac OS X (10.3.9)

Disk 2 from the same G5 should install a working System Folder for Classic and if it doesn't, either you have the wrong disks or something else is interfering…
Did that Mac have any other symptoms before this came up, please?
Retail OS 9 installers do not work with G5 and even with older Macs that can boot in pure OS 9. the CD's System Folder can't be copied - it uses special file versions designed to work on a locked volume, not a HD.
Apple's Clean System Installation Optioni will not replace even your 9 System Folder, and it won't touch X - but could you describe that again, please? The only way you should be able to run a retail 9 installer on a G5 is if you do already have a working System Folder for Classic…

Similar Messages

  • Installing Classic under Tiger.

    I need to run System 9.2 under Tiger.  I bought an iMac G5 on eBay which was running OS X 10.3.  I bought a retail pack of OS X 10.4 (black disc) on eBay but it doesn't come with the System 9.2 stuff.  How can I set it up to run Classic?  I have a grey disc from my old (defunct) G5 but it won't install on my new (old!) machine.

    You said you have been running this on an older machine, so you must have had a Classic environment on the old machine.  So you must have had a "System Folder" on that machine in order to run the OS 9 version of HyperCard, right?
    From the emergency backup drive that you must have made of the old machine at some point in the past 7 or 8 years, copy the "System Folder" from that to your new machine, and under System Preferences for Classic select the newly copied System Folder.  If the old machine has "given up the ghost" and won't run anymore, you may be able to remove the old hard drive, if that still works, and copy the System Folder from there using an enclosure or bare-drive cable adapter to an external port FW/USB on the new machine.
    The problem with running on a late model G4 or G5 that can not boot OS 9 itself, is that you can not boot and run any OS 9 installer on that machine.  Some of the computer models in that transition period that shipped with Classic pre-installed also came with /Applications/Utilities/Software Restore OS X application on the original OS DVD that would re-install the OS 9 software from the original media DVDs/CDs (at least that's how my G4 MDD worked).  Retail versions of OS X do not include the Classic environment or this software restore .app.  I don't know if the G5 iMacs shipped with a Classic environment, I'm not familiar with them, do you know how you got it on there in the first place?  Was it pre-installed?

  • The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol. My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this. Any idea how it can be fixed???

    The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol.
    My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this.
    Any idea how it can be fixed??????

    Hello,
    You are correct, Blue tooth low engergy, BTLE.(only) devices are not backward compatible with Classic bluetooth and cannot connect.
    However the Apple 4S and above have Bluetooth 4.0 support.. Hardware wise it has bothClassic Bluetooth, like the 3GS, as well as Bluetooth Low Energy.  There is no good reason why your 4s cannot communicate to your Sony in-dash player using the Classic bluetooth that resides in the 4S.
    I know that this does not answer the why it does not work, but it should work. Do you have to somehow re-pair the new phone up to the player?  Not  knowing the model of the Sony it is hard to investigate.
    And I hate to ask but are you sure that the Bluetooth radio is on in the phone?
    JT

  • HT204053 How do I set my ipod up with itunes under same account

    How do I set up my ipod up with itunes under the same account?

    Settings->iTunes and Apps Store->Sign In.
    You probably also want to sign into the Cloud with
    Settins->iCloud->Sign in.

  • I have an iphone 4S and i cant download apps onto it. Everytime I click to install, the icon appears on the homescreen with 'waiting' under it and then disappears. Can anyone help? Its driving me mental!

    I have an iphone 4S and i cant download apps onto it. Everytime I click to install, the icon appears on the homescreen with 'waiting' under it and then disappears. Can anyone help? Its driving me mental!

    I found this very good
    http://ipadhelp.com/ipad-help/iphone-ipad-apps-stuck-waiting/

  • Problems with ViaVoice under Leopard, especially key mapping problems

    ViaVoice's behavior has changed considerably under Leopard. First I will discuss the key mapping problem, since I'm eagerly looking for an answer to this problem. At the end of this post, I will voice some of the other problems I've experienced for those who may be interested. The key mapping problem may be specific to the fact that I use a foreign keyboard with a US version of ViaVoice.
    INTRO:
    I have used ViaVoice on my Mac for years, more or less without problems (ViaVoice's bugginess is notorious).
    Those who know ViaVoice will know that one has two general options for dictation. One can dictate into ViaVoice's so-called SpeakPad, which allows special formatting, editing and dictation error correction within the dictated text, or one can dictate into "external" software such as Microsoft Word, in which case ViaVoice just sends a string of characters to that software. SpeakPad appears to make strong use of the operating system's built-in functionality for character formatting, document formatting, etc.
    *MY PROBLEM*
    I have a German keyboard on my PowerBook, yet dictate in US English. When I dictated into SpeakPad under Tiger, all characters appeared correctly. However, when I dictated into Microsoft Word using Tiger, I had to switch the keyboard mapping from German to US to get all characters (that means including the characters that are located at different positions on a German keyboard than they are on a US keyboard such as y, z, apostrophes and parentheses) to appear correctly.
    Under Leopard, things have changed. Now it doesn't matter whether I dictate into SpeakPad or Word; the results are the same and many characters do not appear correctly.
    If set to a German keyboard, y and z appear as expected. To name a few irregularities:
    "(" appears as ")"
    ")" appears as "="
    apostrophes appear as "#" and
    ";" appears as ","
    If set to a US keyboard, y and z are interchanged. "(" and ")" appear as expected. Apostrophes appear as "\" and ";" appears as ","
    By comparison, if typed (as opposed to dictated, as in the examples above) "correctly" (i.e. based on the letters printed on the keyboard) on a German keyboard set to imitate a US keyboard:
    y and z are interchanged
    apostrophes appear as "|"
    "(" appears as "*"
    ")" appears as "(" and
    ";" appears as the symbol for "less than"
    Since I don't have a US keyboard, I can't say how it would behave if set to imitate a German keyboard, i.e. if there's a correlation to the results I get when I dictate.
    Since I was previously able to dictate correctly into SpeakPad by setting the keyboard to "German" and into Word by setting the keyboard to "US," I presume that this is a problem in Leopard, not ViaVoice.
    *OTHER PROBLEMS WITH VIAVOICE UNDER LEOPARD*
    In addition to the aforementioned key mapping problems (that may be specific to those of us with foreign keyboards), ViaVoice appears to have lost considerable functionality in Leopard. I cannot access SpeakPad's Preferences and the correction window. Moreover, the traffic-light like window buttons have disappeared from the VoiceCenter (although they work if you click where they should be). SetupAssistent appears to function.
    I've written to Nuance about these problems, but have little hope that they will invest the time in producing a patch since they haven't released any updates since 2003.

    Thrums1,
    I've never had to "register" ViaVoice after updating the system. I thus suspect you haven't fully followed my above, three-step advice (particularly step 3).
    1) Reinstall ViaVoice from CD.
    2) Update to the latest version (using the patch downloadable from Nuance's website).
    3) Replace the “temp” and “users” folders (in the "ViaVoice" folder at the upper level of your home directory) by a previous copy thereof. When I say previous copy, I mean a copy from when ViaVoice was still working properly, e.g. a copy from when it was running under Tiger.
    As I said, I've gotten ViaVoice to survive several system updates by following the above steps. To my knowledge, the last step is critical since it saves you from having to reconfigure ViaVoice under the new operating system (in this case Leopard). I suspect that ViaVoice is crashing on your system because it's trying to start some module of the SetUpAssistant that is incompatible with Leopard (as many are). If you instead use old copies of the "temp" and "users" folders (from the previous system), then ViaVoice doesn't have to go through the initial "registration" process; ViaVoice doesn't need the SetUpAssistant; and all is (more or less) fine.
    Good luck!
    BTW, to my knowledge, Dictate only runs on Intel Macs. It thus won't run on a G4 iBook, just as it won't run on my PowerBook G4.

  • How can I have a Pages document that is shared with me under my Pages section and not open it with the link?

    How can I have a Pages document that is shared with me under my Pages section and not open it with the link?

    Try this.
    Open the document and select and copy a few pages, say ten pages.
    Open a new blank document and paste the pages you copied into that.
    Save it with a new name.
    Work on those new pages to see if the problem has disappeared.
    If this helps, continue breaking up the large file in to smaller chunks and working on them
    You can of course later reverse the process and merge the files into one new one.
    This suggestion is based on my experiences with large Word files. Breaking it up in to smaller chunks does two things. First, if there is any corruption in the old file, the new copies might escape that. Second, the Mac is faster handling the smaller chunks.

  • DVD optical drive no longer works with Windows under bootcamp or parallels

    For some strange reason, the DVD optical drive- Optiarc 5680 on my 27" iMac, no longer works anymore with Windows under Parallels or Bootcamp. It used to work perfectly fine before, but now it just shows up with a yellow exclamation mark under Device Manager and Code 39 "Windows cannot load the device driver..."
    The DVD drive continues to still work fine with OSX. But it won't work anymore under Windows via Parallels or bootcamp, despite trying to uninstall the optical device drivers, update, reinstall, etc. Anybody else experiencing this or have any ideas?

    Finally found the solution for anybody else who runs into this problem. It was solved by doing a registry mod in Windows from this site:
    http://aumha.org/win5/a/xpcd.php#problems
    described in “My CD drives have vanished (from Explorer, Device Manager, etc.)”
    After applying the registry changes the DVD optical drive worked instantly again with Windows....sigh...guess I can't blame the Mac on this one.

  • Need new ink jet printer for Mac G4 with classic

    I've searching for a new color inkjet printer for my G4 with Classic and have found only 1 by Epson, the R800. However, I'm getting different answers from various techs. One said I just need to get a print server. A tech at Epson says it probably won't work for my classic mode if the OS 9 software is booted up with an OS 10 driver. I don't know the answer to this or exactly what it means!!! Most of my printing would be done with OS 9 software. I have been using an HP laser printer and an HP color inkjet on all 3 of my networked Macs with no problem. Can anyone tell me if the Epson R800 will work? Thanks, Ann C

    I don't have it, but the specification page says
    +Windows 98SE/2000/Me/XP, Mac 8.6-9.2, OSX 10.1.3 or later+
    http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&in foType=Specs&oid=37472319&category=Products
    Plus, there is a driver for Mac OS 9 available for download here
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 30501&prodoid=37472319&infoType=Downloads&platform=All
    So I see no reason why it would not work.

  • Problem with clob_write under client 9.2.0.6: UnsatisfiedLinkError

    Hi all,
    I'm running Oracle client 9.2.0.4 on Windows XP and Java 1.4.1_3.
    Writing or reading clob's works pretty well.
    As i tried to update to Oracle client 9.2.0.6, i got the error
    Communication failed: java.lang.UnsatisfiedLinkError: clob_write when i tried to write a clob. The same error appears when i tried to read a clob.
    Is there a specific problem with clobs under this client?
    All other JDBC operations work as good as before.
    Thanks.

    Here is another hint.
    In your classpath, use the jdbc driver that's under your oracle installation to which you are trying to connect to (ie, <ORACLE_HOME>\ora92\jdbc\lib\ojdbc14.jar).
    I had the same problem in 9.2.0.6 and its gone when I replaced the ojdbc14.jar. I copied the ..\ora92\jdbc\lib\ojdbc14.jar to my java client program's classpath, and ran the java client without getting the UnsatisfiedLinkError.
    It looks like the ocijdbc9.dll under ora92\bin has to match correctly with the jdbc drivers you would be using. I got this idea from this link:
    http://episteme.arstechnica.com/groupee/forums/a/tpc/f/6330927813/m/705001068631/inc/-1
    Hope this helps.

  • Mac osx.4.1 using adobe pagemaker with classic

    My question to anyone is - I have a hp deskjet 5650 printer that is the only printer that is compatible
    with classic. It was working fine til yesterday when I did some software updates. Now it will not print.
    infact I tried to reinstall printer and that did not work either. Please is there anyone who can help me!!
    Message was edited by: bonybutt

    Post to the Tiger forums.

  • How do i create gallery with text under thumbnails?

    Hi. Im new in Muse and im trying to learn. My next challenge is to make thumbnails with text under like this:
    And when visitors click a thumbnail it should pop up the original size picture in a lightbox. A mouseover big pic
    should also work.
    Like this site. Affinity Surfaces | Color Gallery Here they have text on thumbnails and when you click on it it shows the full aize pic
    Any tips?
    My goal is to create my own art-page where i can show and sell my artwork

    That worked pnoypie
    I had to manually put pic in thumbnail and in lightbox. (or is it an other way?)
    I also had to put the text under thumbnail manually... but thats ok. To bad i cant group it with the thumbnail.
    Is it a way around that?

  • Anyone working with eView under JCAPS 5.1.X

    Has anyone worked with eView under JCAPS 5.1.X? I am exploring the use of this tool in a project and I would like to talk to someone who has real world experience.

    Using eView to uniquely identify the person is a good solution especially when customizing the OTDs to each specific source.
    Deployment?
    Well, it depends, impossible to make a blanket statement here.
    With our case, a dedicated eView (logical host) domain is deployed, another domain is deployed for HL7 messages. JMS queues and topics are the the integration layers between them. Currently, looking into JMS Grid for a logical decoupling and clustering between domains.
    Also, going to migrate our eGate SRE messages to JCAPS gradually, the messages which pertain to patient demographic events (ADT) will subscribe to JMS topics wired to eView.
    The great thing about JCAPS (J2EE) is to logically partition components wand then deploy as required. For example, going to deploy HL7 message collaborations and eView components to a single domain now because transactions are low.
    Designed this without consultants, have many years experience with J2EE software development, my problem is with the limited JCAPS Netbeans IDE functionality - ready for JCAPS 5.2!
    Anyway, the eIndex project included with JCAPS, should get you started, forget the "patient" semantics, this is really a person in disguise.

  • Differece bet GLPCA and GLPCT in ECC 6 with classic PCA

    Hi Ajay and Experts,
    Thank you for helping me till now for all the issues in COPC and COPA we are all set.
    I found once issue in PCA today as below, can anyone please give inputs.
    I have reviewed all the threads but i want to specify my case first.
    We are in ECC 6.0 with Classic PCA.
    We are using Sales order substituion to get the PCA based on Region. 
    User dowsnot want to use transactions iKEK etc., for Balance transfers.
    We crated on e kind of dummy PCA and assigned in 3KEH so all the balance sheet accounts posting with same.
    we are trying get balances from GLPCT.
    I observed the line items are getting updated in GLPCA but not in GLPCT, so our report get failed.
    Can you please help me as early as possible.
    Thanks,
    Sudha

    Hi,
    My problem is resolved.
    Actually the values in GLPCA and GLPCT are getting updated as expected.
    The problem is with my custom report, i have identified and working with my technical team.
    Thanks,
    sudha

  • No scrolling with touchpad under Xfce

    Hi, i've discovered that under xfce i can't sroll with touchpad, under gnome 3.2 or kde 4.7 it works, i've tried also with gsynaptics but vertical scrolling is enabled but not working :\

    I've found that i've tap to sroll so it's a bit different from normal scrolling, i don't know why under xfce it's different, in mouse's option i don't have any scrolling item

Maybe you are looking for