TDMS List Contents returns groups for previously opened file

I get a directory listing of TDMS files, then loop through file by file, using TDMS List Contents to retreive the groups found in the particulare file. I open each file, list its contents, and close it before opening and listing the next file.
If a file has no groups, TDMS List Contents returns the group list from the previous file.
How can I prevent this behavior?

Unfortunately, the original VIs were developed on a Classified system, so I can't include them here. However, I've created similar VIs that demonstrate the equivalent problem.
Run the 'create files' VI to generate appropriate TDMS files, and the 'list contents' VI to demonstrate the issue.
Note that these VI's were created in LabVIEW 9 SP1 (Version 9.0.1 32-bit).
Thanks for taking a look it this!!
Attachments:
TDMS Issue Create Files.vi ‏18 KB
TDMS Issue List Contents.vi ‏13 KB

Similar Messages

4.0 EA2 - Previously Open Files Not Opening on Start

Just started using 4.0 EA2 from 4.0 EA1. Thanks! Noticed is much faster than EA1!
I have noticed that previously opened files no longer are being opened when starting SQLDeveloper. Prior to EA2, any files that were open when SQLDeveloper is closed were opened then next time SQLDeveloper started. Is there a setting I am missing that governs this behavior?
Thanks!

True but I think that the disk image mounter is not working so I'm not getting the option to drag anything anywhere. How do I repair the disk image mounter?
Just tried after reading on a www forum;
Run /Applications/Utilities/Disk Utility.
Click on "Macintosh HDâ€? in the left column and then press the "Repair Disk Permissionsâ€? button. I don't think this step was part of the solution to my problem.
Delete the file called /System/Library/Extension.kextcache
Delete the folder called /System/Library/Caches/com.apple.kernalcaches/
Restart
But the deleted files just re apear after start up and the issue continues.
There is no issue with the hard drive, also just booted to Disk Utility again and done a volume repair, no problems there. Grrrrrrrrrrr

How do I stop lion from opening all previously opened files on restart?

How do I stop lion from opening all previously opened files on restart? I want to wipe all open files, since that seems to be the most efficient way to close lots & lots of open files (that build up over the course of normal activities)

One way is to always quit all applications before you shut down.
An easy way to do this (although in my own experience it doesn't seem to always work perfectly) is to simply hit CMD + TAB + Q and hold down all three keys.
When you do that the computer will cycle through all open apps and close them. If there are any open files that haven't been saved, it won't close them. So you should save everything you want to save before you hit CMD + TAB + Q.

Where do I find list of material group for service material

Hi,
please any one tell , where do i find list of material group used for service materials?
regards,

Hi,
What is the criteria u are using to find out material groups?? If it is on the basis of material type DIEN (services) then go for T code MM60 put material type and u will get all the materials with material groups which has material type as DIEN.
Also u can directly go to SE16 and in T023 table find all the material groups.
Edited by: sapvibhor on Feb 23, 2011 10:57 PM

InDesign Button Action for PDF – Open File (in new window)

I am using the 'Open File' action on buttons in a document i am making which will eventually be a PDF, but am wanting to specify the button action to open the file (another PDF) in a new window.
I have found that I can achieve this and add button actions with this specific behavior in Acrobat, but it seems to be missing in indesign's abilities as far as I can see. Is there a way to do this in indesign so that i do not have to tinker in acrobat after I have made my PDF. As if I have changes to the PDF, all buttons then have to be totally re-done each time, and i will have possibly 900 buttons!!
Thanks.
(Using indesign CS4)

Jeff,
You are correct. I want to have a DVD with multiple PDFs. The main one almost acting as a table of contents for the rest.
Problem = the 'main one' is 62 pages long, many hundred buttons and every page has at least a few of these links needed.
Which means, if you are correct (and I believe you are, hope you aren't) that I need to custom code these buttons in Acrobat.
The method is easy, but x300 = painful. And then the kicker... Boss says, 'Change slide 30' ... which means: Back to InDesign, Export to PDF, Recode ALL BUTTONS.
*Note, there are some 'interactive' buttons with roll over states. So I don't think replacing the pages would work.

Script for closing opened files remotely.

Hello guys. I am new to scripting hope my question will be understandable for you.
What I'm trying to do is a script that would ask me the directory and name of a file (ex:
e$\test\test1\test2.pdf) and then check on 50 servers if this file is opened, if yes close it.

I don't have problems with adobe I just want to close any (.doc,.pdf,.xls.......) opened by users on the sharing. I know how to do it from computer management on the server,but how to do it through cmd?
You cannot do this with a batch file. The PowerShell script can do it but only to the share that the file is opened on. There is no way to close locally opened files.
You cannot do a general search for a file using the admin share and close the file. You must enumerate the open files on the share and close the specific handle. What you see on the share management snap-in is not a file. It is the handle
reference to the file. You can only find it using the net enum API call. The PowerShell script calls this API from a piece of compiled VB.Net code.
¯\_(ツ)_/¯

Fix for slow opening files... soon?

We have several stations set up globally in various offices using Photoshop CS...
Image files, no matter how small the file is... even a single small JPG takes a good 10-15 seconds to open (win xp) and we frequently need to work with hundreds of images. This seems to be a major problem and from what I find on Google, not uncommon...
I finally ran into this temporary 'fix' in the archives which involves setting up a LOCAL printer/driver as a DEFAULT...
While that DID alleviate that problem, I can't see that adobe is just letting this be THE fix for the problem... I've done updates to our CS3 products and have a difficult time believing that there is no permanent fix for this yet.
It seems unlike adobe to expect so many clients to have to experience this problem, spending hours or days trying to figure out why their systems have slowed down and asking themselves questions mostly unrelated to the problem, such as 'did i run out of swap space on my drive?', 'how are my history/cache settings?', 'is there some network drive causing the problem?', 'Is there some spyware slowing my box?', etc...
And on top of that having to notify all the offices... 'Okay guys, if you use photoshop you need to do this, this, and that... temporarily'
Please tell me there is a permanent fix soon...

I don't know which versions of photoshop need to check/contact the network printer...
For volumes of image processing via the batch commands I often need to use our old Photoshop 6 which, even with the network (a fairly large corporate network) the files open up almost instantly... every time... unless they're huge print resolution images...
On the same network for such a task (batching hundreds of images) PS CS3 is unuseable to us unless we implement the local printer 'fix'... and even so, there is more of a delay than with our old photoshop...
And why does it need to contact the printer for each file that is opened? For the first one, sure... check it, done... I'm not printing dammit, just opening files.
If it needs printer information the local OS already has drivers loaded up, couldn't it check those? It shouldn't have to look for other network devices on there unless it's using them... but I'm no tech... so there must be a reason that it simply MUST do it...
And even so... why is this 'fix' so damn hard to find on the net? Tons of people with issues and a lone, difficult-to-find blurb as an obscure fix...?

Opening a recent file accumulates with previous opened files

If I save a file in PDF reader and then later return to it and it has accumulated with previous files. I presently try to open a file which is one page and it displays a 32 page document that I have to go through all of them to find the one I am looking for can anyone help me with this one ?

What do you mean? Reader does not combine your files... It's technically impossible for it to do so.

Going back to previously opened file

When going to "File" and "Open" in any application program in operating systems prior to Leopard, it would not only take you back to the folder you had just been to, but also highlight the last file you had opened. In Leopard, it only takes you back to the last folder and takes you to the top of the list. You then have to scroll down and find the last file you worked on so you can click on the next file to open it. I work with hundreds of photo images in PhotoShop and find it very time consuming to have to scroll down long lists of numbered files constantly having to remember the last image file number I worked on. I've tried looking for things to change in Preferences (both in the OS and the application) and views, etc. but haven't found anything. Any Ideas?

I think I know what you want to do and I don't know how to make that happen, but I can offer a couple of workarounds.
If you are merely opening the file to see what it is, use quicklook instead. Just select the file and hit the spacebar.
If you do want to open each one at a time, then open a Finder window with the files listed and drag each file to the icon of the app you want to open it in. The item you last opened will remain selected in the finder list.

Content conversion parameters for fixed length file

Hi,
Hey i have a small doubt.My input is like this
99443 123213 232234 12312 127544 23423
Here i have four recorsetnames namely HEADER1,HEADER2,HEADER3,HEADER4,HEADER5,HEADER6 all the recordsets are of same size but the lengths of the fields in it vary so i specified the following parameters
HEADER1.fieldFixedLengths=1,3,1
HEADER1.fieldNames=value1,value2,value3
HEADER1.endseperator=" "
HEADER2.fieldFixedLengths=1,3,2
HEADER2.fieldNames=value1,value2,value3
HEADER2.endseperator=" "
MY OUPUT XML STRUCTURE SHOULD BE like this
<header1>
<value1>9<\value1>
<value2>944<\value2>
<value3>3<\value3>
<\header1>
<header2>
<value1>1<\value1>
<value2>232<\value2>
<value3>13<\value3>
<\header2>
Is the content conversion parameters i specified enough for that. I wanted to know how would it know the begin of the next recordset(ie the seperation between the two recordsets) .Please help me its vey urgent
Thanks in advance
Sriandh

Are header 1 fields always going to occur first , then header 2 and so on?
By default file adapters do not support Nested Strcutures and so if the sequence is going to be the same and all of these have an occurence of 1..1 then things will work.
But if there is going to be an occurnece of * then you will need to use KeyFields.
Regards
Bhavesh

Can Photoshop CS6 automatically reopen previously open files on Mountain Lion?

Mac OS X 10.8 introduced a new behavior - apps could automatically open the documents that were open in the last app execution.
Can Photoshop CS6 be configured to behave this way?

David,
How about Chrome, bbedit (even back to version 9.1.1), PixelMator, others, none of which are 'Apple Apps'.
The Resume and Autosave APIs have been around since 10.7 (2011).
Maybe if Adobe wasn't so busy trying to shove us all into a rental model they'd have time to consider implementing OS APIs that have existed for more than 2 years.

Help adobe reader listed as installed but can not open file

I need to open a file from email. It says adobe reader not installed but it shows it is installed when I look in control panel. Thanks for any help you can shre..

1.Which OS you are using?
2.What version of Reader is shown in in control panel?
Just try re installing Reader from Adobe website and report any issue you face during installation.

How to create the Table of Contents in Preview for a pdf file?

Does anyone know how to use the Preview to create a new table of contents or add a new link to the existing table of contents?
Thanks

Preview cannot do this - it is not a PDF editing utility. If you have the original document in an editable format (eg a Pages, or Word document) then you can edit it, print it, and from the print dialogue, save as a PDF. Otherwise you'll need the full Adobe product or similar to acheive what you want.

File content Conversion Issuse for a Sender File Adapter

Hi All ,
             I am working for a Migration project , so my File structure will be as follows
<HEADER>
      <DATA1>
     <DATA2>
     <DATA3>
   <HEADER>
<ITEM>
     <ITEM1>
     <ITEM2>
     <ITEM3>
<ITEM>
WHERE i do have flat file will be as follows
10001,20081902,US
10,soda,1
30,soda,4
40,soda,5
10002,20081902,US
10,steel,1
30,steel,4
40,steel,5
how to pick this file using FCC from sendere flat file adapter without keyfields , and i can use fixed length also

Sridhar,
You can use a work around like this. Create a generic Data Type something like below.
<Message Type>
   <Recordset> - root node
      <ROW> - element with occurence 0..unbounded
Now create an outbound MI with the above MT, in FCC in sender file adapter, give Recordset structure as ROW, *
This way , you will read the entire file inside XI as an XML like below
<ROW> header record </ROW>
<ROW> item record 1 </ROW>
<ROW> item record 2 </ROW>
<ROW>....</ROW>
In XI , since your header row & item rows are fixed length, now, you can use that in a UDF in your message mapping , or parse the xml using DOM parser in Java mapping, you should be good. Hope this helps.
~Saravana

App Expose showing all previous opened files

If I go into App Expose (3-finger swipe down) in apps like Textedit or Pages, I see a row of icons showing the last x docs thart have been opened. I don't want this to happen. I thought that App Expose only revealed all open windows of an app.
Is there any way of switching this off?

may something with system prefs general aand items you want show..

TDMS List Contents returns groups for previously opened file

Similar Messages

Maybe you are looking for