Team Collaboration: Change the Task attributes are not synchronized...

Hello!
I am sorry for my poor English.
When you modify in the Team Collaboration the following Task attributes:
Percentage of completion and Status of implementation,
the changes are not synchronized with others tools (OBEO, Zimbra, Mozilla Sunbird).
Change of Status of implementation of synchronized only in Mozilla Sunbird.
Can anyone give an explanation or solution for this?
P.S.
The problem I found recently in 2.0.1.5. (I think that in earlier versions was the same)
Patch set 2.0.1.6 does not eliminate this defect.

The answer to my question is,
I am stupid. I don't pay attention to the details.
For clarification I did the following...
class superclass{
  private Integer PIN = new Integer(100);
  // this is the part in my code that I forgot.
  protected Integer getSecretPin(){
    return PIN;
class sub{
  sub me;
  public sub(){
    me = this;
  // Sneaky stuff
  public Integer getPIN(){
    return
      ((superclass)me).getSecretPin();
}I was tracking down a bug and was writing some output debugging and THOUGHT that I had stumbled on a security thing. On further inspection into the superclass code I had really accessed a protected method. My compiler ignored the casting.
Thanks to all for "Looking into it."
Peace

Similar Messages

  • How to remove the tasks which are not manually recoverable?

    How to remove the tasks which are not manually recoverable?
    I tried performing manual recovery for the BPEL processes but there are few tasks which cant be manually recoverable..
    Could you please tell me how to remove those tasks and also tell me which information in the console is the task_id in the database?

    This article explains how to cleanup bpel process instances, you can find task instance id by searching for data in payload using api.
    Managing a BPEL Production Environment
    http://www.oracle.com/technology/pub/articles/bpel_cookbook/blanvalet.html
    Cheers,
    Rad

  • SOLUTION MANAGER - VAR Scenario - Attributes are not transfered

    Hi Solman Gurus
    I have an issue regarding connection between Customer and VAR solman.
    IThe connection is established following document How To Setup ServiceDesk 2 ServiceDesk Connection Nov 09.pdf.
    The problem is in VAR Solman.
    When message is transfered from Customer solman to VAR solman the following attributes are not transfered:
    Sold-to party, Reported by, Support Team, Message Processor.
    The Ibase is configured in both systems. When message is posted from satelite to Customer Solman all this attributes
    are transfered. In the next steep, when message is transfered from Customer solman to VAR solman this attributes remain
    empty in VAR Solman.
    What confugration is missing in VAR Solman?
    Thank you in advance
    Marko

    Hello Marko,
    How did you define the value mapping? Automatically or manually?
    Have you checked that Incoming and outgoing value mapping has been created in both systems?
    Are you copying the values or taking an other action?
    Could there be a rule that is setting the value to space?
    I'd take a closer look at your value mapping and make sure incomming and outgoing have been defined properly on each system and make sure the rule is correct, and its not taking some unexpected action like set the value to blank when you wanted to copy it.
    Regards,
    Paul

  • I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

  • In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie.  Is there someway to refresh the IPhoto event in IMovie?

    Background:  I'm transferring file folders from a Visa laptop via an external hard drive to my IMac.  In the folders are photos and videos from different cameras.  SO I first tried to import to IMovie but it would not recognize any of the files.  So then I imported into IPhoto and both photos and videos were imported and I created events for each folder.  When I first opened IMovie I had to wait for it to create "thumb nails".  Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events.  I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie.    I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie. 
    I'm doing this on three events with about 100 photos and videos.  But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie.   I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.  
    Appreciate any tips or pointers.
    OBTW this is my first question as a first time Apple owner. 

    It was suggested I move this question to IPhoto or IMovie which I did. 
    Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
    I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

  • Can't log on with administrator user by finding the message "The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on.

    Hi,
    Now, my Windows 2008 R2 Enterprise server are running in the domain. It have problem about some one in my team have remote my server with the user administrator while I'm remote it now. It make my session loss. I tried to remote it again but I found
    the message at the log on screen about "The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on."
    Now, nobody can't remote with administrator user into this server. I have check the application log. I found the error message like this.
    ++++++++++++++++++++++++++++
    Source: Desktop Window Manager
    Event ID: 9003
    Detail: None The Desktop Window Manager was unable to start because a composited theme is not in use
    ++++++++++++++++++++++++++++
    Source: Microsoft-Windows-Winsrv
    Event ID:10002 
    Detail: The following application was terminated because it was hung: mmc.exe.
    ++++++++++++++++++++++++++++
    Source: Microsoft-Windows-Winsrv
    Event ID:10002 
    Detail: The following application was terminated because it was hung: javaw.exe.
    ++++++++++++++++++++++++++++
    Source: Microsoft-Windows-Winsrv
    Event ID:10002 
    Detail: The following application was terminated because it was hung: Explorer.exe.
    ++++++++++++++++++++++++++++
    Source:Desktop Window Manager
    Event ID:9009
    Detail:The Desktop Window Manager has exited with code (0x40010004)
     ++++++++++++++++++++++++++++
    Source:Microsoft-Windows-Winlogon
    Event ID:6005
    Detail:The winlogon notification subscriber <Sens> is taking long time to handle the notification event (Logoff).
    ++++++++++++++++++++++++++++
    In addition, I can log on this server with other user but I can't log off by it's showing the message "please wait for the system Event Notification service". Normally, the problem can solve by reboot the server. But how can be solve this problem
    by we do not reboot the server?

    Hi,
    The cause of unable to remote back to the server seems to be services hung, please try to reset session as the article below guides to see if it works:
    Windows Server: Remote Desktop Error: The task you are trying to do can't be completed because Remote Desktop Services is currently busy
    http://social.technet.microsoft.com/wiki/contents/articles/28636.windows-server-remote-desktop-error-the-task-you-are-trying-to-do-can-t-be-completed-because-remote-desktop-services-is-currently-busy.aspx
    If the issue can always be re-produced, then I would suggest you fully patch the system.
    More information for you:
    The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on
    https://social.technet.microsoft.com/Forums/windows/en-US/c58bfbd5-1d63-47e3-a489-6d8c8778b76b/the-task-you-are-trying-to-do-cant-be-completed-because-remote-desktop-services-is-currently-busy?forum=winserverTS
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Error while changing the Display Attribute into Navigational Attribute

    Hi all.. Gud Mrng.
    I was changed the attribute (product) from display attribute into navigational attribute and while save and activating the info object it is not getting activated and it is throwing the below error message.
    Error Message: u201CThe Info object is being used in several data targetsu201D
    My Questions:
    i)     Do I need to delete the data from all the data targets (where this info object is using)??
    ii)     Do I need to delete data only from the main info object (Zmaterial)? Is this single action enough?
    Please suggest me which action I need to follow & What are the precautions need to take while changing the Display Attribute (product) into Navigational attribute of info object (Zmaterial).
    Thanks in advance.
    Thanks & Regards,
    B Venugopal

    Hi Garima
    Only in case of key figures we cannot change it from display to navigational.
    If the info object is a characteristics then in the General tab of the info object if you select 'attribute only' then the iobj would be a display attribute only. If you leave it unmarked then you can use the iobj as a navigational atribute.
    I am sure you know that these settings only mean if a IOBJ can be used as display or navigational.  To  use it as a navigational within another object you will have to change the settings from 'DIS' to 'NAV' for the said info object in the 'Attributes' tab of its parent info object.
    Further if you use the parent info object in any data target / infio provider you will have to further mark the info object as 'navigational' while defining the attrbute of the said data target / info provider. The info object gets displayed in the data target / info provider attribute properties as 'parent IOBJ_info object'
    Cheers
    Umesh

  • How to restrict the user to change the project structure but not the documents?

    Hi,
    I have created one project assigning different users in Solution manger. I want to risitrict some of the users to change the project structure but simultaneously allwoing the project documents to be created, edited or deleted using solar01 under Project documentation tab. For that I have followed the steps provided in the follwoing link.
    http://wiki.scn.sap.com/wiki/display/SM/Howto+Restrict+Changes+to+Project+Nodes+to+Assigned+Team+Members
    I am able to restrict the users to change the project structure, but I am not able to allow access to the project documents. It gives me the message "You are not authorised to change the project". This fulfills my one of the requirements. But, Is there any way  to restrict the user to change the project structure but not the documents?. Any help will be apperitiated.
    Thanks,
    Rutvik Uapdhyay. 

    Hi Rutvik,
    Basically there are 2 different authorization role ...you should look for and customize as per requirement in Z* namespace.
    role  - SAP_SOLAR01_ALL
    this take care of objects in Solar01 like tab access etc
    role -SAP_SOL_KW_ALL
    this takes care of entire documentation within solman
    hope this helps
    Regards
    Prakhar

  • Attributes are not displaying in Navigational Attributes area of DSO.

    Hi Experts,
    I have created a DSO and have included Info Objects 0SOLD_TO & 0SHIP_TO. In the Navigational Attributes area, its attributes are not getting displayed even though the attributes are in the info object.
    What are the steps needed to perform for it to display there?
    Waiting for your reply,
    Thanks in advance,
    With Kind Regards,
    Shreeem

    Hi Shreem,
    If you want attributes of any master objects in navigational attributes section, you have make them navigational attributes while defining base info object.
    Please follow the below steps.
    1) goto RSA1, search for 0SOLD_TO & 0SHIP_TO info objects and open them
    2) goto edit mode of info object and goto attributes section.
    3) here you will find for every object "DIS" --- this means these attributes are display attributes.
    4) If you want to change any attribute to NAV, then click on "Pencil Mark".
    5) Now you can see text NAV instead of DIS for that attribute.
    activate the info object and goto DSO, now you will see that attribute in navigational attribute folder.
    Regards,
    Venkatesh

  • Changes made in BOM are not reflected in Configurator.

    Hi all,
    When i update minimum and maximum quantities in BOM, the new values are not reflected in the configurator.
    I have found a patch (patch# 4410573) for this issue in metalink and applying that patch did not resolve the issue.
    I have logged an SR with Oracle for this and Oracle support have asked me to run "Refresh Single Configuration Model" concurrent program and see if the changes are reflected.
    This program has 2 parameters one for folder and the other for Configuration Model Id.
    When i try to run the program, for any of the folders, the value set for the parameter Configuration Model Id does not show any values and hence i am unable to run the program.
    We don't have a separate instance for COnfigurator.
    Do i need to do any set up so that my Configuration model is reflected in the LOV?
    Can anyone please help me on this?
    Oracle Apps version: 11.5.10.2
    Configuration software build: 11.5.10.25.43A
    Regards,
    Sreekanth

    Hi Jason,
    Please see my comments below
    Jason said*
    Support is correct. If you haven't run the Refresh a Single Configuration Model concurrent program for your model, then the new BOM attributes will not be visible in your model. Changes to items/BOMs are not directly reflected in the configuration model. You must "refresh" the model to see the changes.*
    Even without running the "Refresh a Single Configuration Model" concurrent program, in some scenarios, changes are being reflected in Configurator.
    Ex:
    When i change only minimum and maximum quantities, the changes i.e. new minimum and maximum values are not reflected in Configurator.
    But, when i also change any of the following fields along with minimum and maximum quantities, new values are being updated in Configurator with out running the refresh program.
    effectivity_date, disable_date, component_quantity, planning_factor, component_yield_factor and optional class
    Can you please explain this?
    Also, i have already tried executing the query by commenting the enclosing_folder check. But still, the query is not retrieving any records.
    Basically, the sub-query that fetches devl_project_id itself is not retrieving any records.
    Jason said:+
    Based on the SQL above, the only criteria for importing a model is that the item under the folder must be:+
    a. A Model (PRJ = Project)+
    b. The Model cannot be deleted (Deleted_flag must be '0')+
    c. And the model must have been imported from Oracle apps, e.g. it cannot be a non-BOM model (orig_sys_ref is not null)+
    Can you please tell how can i check whether model is imported into configurator or not and if it is imported from where is it imported?
    Regards,
    Sreekanth
    Edited by: Sreekanth Munagala on May 12, 2011 8:52 AM

  • Changes in backing bean are not considered for deployment

    hi,
    i'm not sure whether this is a jsf specific issue but..anyway, here's the case: I'm using eclipse ( lomboz) as ide and whenever i change something in my backing bean (let's say add a new method) it is not found after redeployment neither after clean command. after some startups the changes eventually are adopted. this is really annoying as just starting the server takes me half a minute. so if anybody ever had the same or similar problem or has any experience with hot deployment please sent me a clue.
    regards,
    jens

    >
    Elena Ainoulina wrote:
    > Anyone had this issue in CHARM before ?
    >
    > we have SLFN - SDCR - SDMJ open for a change.
    > Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
    > Business now wants to stop this change and close SLFN.
    >
    > How can I close/cancel SDMJ ?
    > When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
    > Is there a way to force close SDMJ ?
    >
    > Thank you
    > Elena
    Elena, the system is giving you this message as a (cryptic) reminder that even though you want to close the SDMJ, you have made changes in DEV and QA that need to be reversed with another transport.  Depending on your audit requirements, you may want to add these reversing entries on the same transport as a new task, or on an additional transport and send the whole thing through the normal processing.  The other alternative is to execute CRM_SOCM_SERVICE_REPORT - just make sure you have reversed the changes already made to maintain the integrity of your landscape.

  • Changes in development system are not excluded

    Anyone had this issue in CHARM before ?
    we have SLFN - SDCR - SDMJ open for a change.
    Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
    Business now wants to stop this change and close SLFN.
    How can I close/cancel SDMJ ?
    When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
    Is there a way to force close SDMJ ?
    Thank you
    Elena

    >
    Elena Ainoulina wrote:
    > Anyone had this issue in CHARM before ?
    >
    > we have SLFN - SDCR - SDMJ open for a change.
    > Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
    > Business now wants to stop this change and close SLFN.
    >
    > How can I close/cancel SDMJ ?
    > When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
    > Is there a way to force close SDMJ ?
    >
    > Thank you
    > Elena
    Elena, the system is giving you this message as a (cryptic) reminder that even though you want to close the SDMJ, you have made changes in DEV and QA that need to be reversed with another transport.  Depending on your audit requirements, you may want to add these reversing entries on the same transport as a new task, or on an additional transport and send the whole thing through the normal processing.  The other alternative is to execute CRM_SOCM_SERVICE_REPORT - just make sure you have reversed the changes already made to maintain the integrity of your landscape.

  • Error RSM006 "Attributes are not yet maintained"

    Hello everyone, I have had a problem with two infopackages,  one of them has the 0COORDER_TEXT datasource and the other 0COORDER_ATTR datasource. When I run the process chain with these infopackages, I have the error RSM006 "Attributes are not yet maintained", if I try to change these infopackages with the RSA1 I have the same error.
    Do you have any suggestion to solve this problem?
    Thank you very much.
    Best Regards
    Maximiliano Valin

    Thank you, I check your recommendation and I found everything ok, the 0COORDER is ok and active, and the tranfer rules are ok and active too, I don't know what other thing could be the problem.
    This is the help message that appear when the error happens.
    Attributes are not yet maintained
    Message no. RSM006
    Diagnosis
    The attributes have either not yet been created or activated.
    The data cannot be taken from the source system without maintained attributes. Therefore, this data request is not possible.
    Procedure
    Maintain the attributes for this master data-InfoSource in the Administrator Workbench and then activate them.
    Thank you for everything.

  • Process chain termination - Attributes are not yet maintained

    Hi Experts ,
    I am running a process chain in the production system , which is failed , however the below objects in the chain is completing successfully.
    Please see the below msg descriptions
    Attributes are not yet maintained
    Entire chain now has status 'R'
    Process Start Process, variant Technical InfoObjects Attribute Load has status Undefined
    Process Execute InfoPackage, variant InfoPackage has status Undefined ...
    Process Execute InfoPackage, variant BW Systems has status Undefined
    Process Execute InfoPackage, variant InfoSource has status Undefined
    Process Execute InfoPackage, variant InfoCube has status Undefined
    Process Execute InfoPackage, variant Application Component has status Undefined
    and many things which are undefined ..
    Have nay one come across this issue , how to resolve this ?
    Thanks

    Hi,
    Is there any changes done for the respective IP's/objects used in the chain recently. It might be the cause and before running jst test the chain using CHECK option and accordingly redesign, activate and schedule the process chain,
    rgds,

  • Change the field attribute of a field in data source - 0CRM_SALES_ACT_1

    Hi ,
    I have a data source named 0CRM_SALES_ACT_1 in CRM system.
    The fields PLANNED_TS_FROM and PLANNED_TS_TO are hidden fields i.e. the field attribute is 'A' - Field in OLTP and BW Hidden by SAP.
    Following are my doubts:
    1. Whether the values of these fields will be extracted into BW or it will not be?
    2. How do I change the fields attribute value of these fields(its standard data source)?
    3. Is there any SAP note to do this ?
    4. If the above doesn't exisits, then should I go for a append structure to the standard data source?
    Please help me.
    Regards,
    Ahmed.

    Hi,
    U can unhide ur fields in RSA6 and then replicate the datasource in BW. These fileds will come in BW.
    You cant change the attribute value for STD DSO.
    No SAP note for the same.
    You can append the datasource with the new fields with the attribute you want and hide the std. fields then goto BW and replicate it. You can then map it with the BW fields as you want.
    *Assign points if helpful.

Maybe you are looking for

  • I can't make my Apple ID and my primary email one and the same. I've had my Apple ID since the first iPod but now I can't access iCloud because of this.

    Since the introduction of iCloud, I've had this problem with the Apple ID. I've tried to "manage my Apple ID" but clicking the box to "make Apple ID and primary email address one and the same" but it just won't work. I'd given up and just ignored eve

  • Encoding issue in jsp

    Hi All, I have an application where in i have an add and edit option ,when i add/edit an euro symbol it appears as "â?¬267" instead of "€267". my jsp encoding is as follows: <%@ page language="java" contentType="text/html; charset=UTF-8" pageEncoding

  • Loading local content using AJAX in AIR

    Hello All, I've got a techinical question regarding loading local html5/Css/JS files into AIR's HTMLComponent. I'm very much aware that Safari's webkit implementation can handle this effectively and AIR's Webkit Implementation boasts about having nea

  • Snow leopard installation fails after reboot

    I have a mac book pro 2007 non unibody. It has 10.5.8 installed and I would like to install snow leopard. My machine wont boot from the dvd - I get a no entry / warning symbol. However it can be read when I am booted into 10.5.8 and hence I clicked o

  • Media sync problem with BB LINK

    I've down every thing to make the BB LINK sync my media files(pictures,music,videos....) but it did not work.I've a mac and I instaled BB link several times, also I restore my BB z10 a few times then I instal BB LINK on my friends ps which runs WINDO