Tech response and awards

Hi All,
we are setting up 2 envelope bidding here. vendor has submitted bid and we have opened technical bid. when we want to accept that technical bid, we found that accept and reject buttons are disabled.
our system details : SRM 7.01 SP 5 and ecc ehp5.
also we observed that 2 envelope bidding in SRM 7 when we want to accept that technical we see a extra button called tech response and awards and now in srm 7.01 we see that tech rfx response and awards button is not there instead we can see this under response and awards screen.
Thanks and Regards,
Abdul Raheem

In SRM 7 EHP1 , this screen is shown under response and awards.
Abdul Raheem

Similar Messages

SRM - Add column to Response and awards table

Hello,
I have a requirement to add a column in the compare responses table (please see print attached), i've found the WDA program, that is the /SAPSRM/WDC_AODC_BEV_CMP, View: V_BID_COMP_ITEM, but the part of the table that is in the print attached is created dinnamicly so i have not found where do i go to add a column there.
Has any of you guys done that?
Thanks a lot!
Joe

Hello Madhu,
Thanks so far for the responses, but now my questions are in a more technical way. I've found where the column is created but now i have 2 other problems.
1 - The place that the columns are created is the method: /SAPSRM/IF_CLL_DOTM_BEV_C_I~VIEW_GENERATE. I've created a enhancement at the end of the code. There is a DO for every bid line to create the grouped columns. My question is, i'm able to place a column only on the last grouped columns, because is the last one instanciaded on the standad do end do code. Is it possible to re-instance a grouped columns to add a column there? Ex:
Add the column group to the table
lr_table->add_grouped_column(
the_grouped_column = lr_group_col ).
ENDDO.
My code is here after the enddo. The lr_group_col will be used to create a instance for every grouped column, and i my code when i use the lr_group_col only get reference to the last one created get it?
2 - In the code, it creates the columns, with the fields referencing a context, Ex: BID_COMP_ITEM.PRICE_1. It's created dinamycly, and i'm not able to read/change theses values because is not like reading context for regular context node on WDA. Do you know how can i do it? Like importing thoses values to change and bind it again...
Thanks for the responses so far, i'm almost here
Joe

Reason for rejection during "Tech Response & Awards"

Hi,
SRM 7.0 PPS:
We have seen that, In 2 envelope RFx Response, when a bid is accepted/rejected duing the tech bid response and awards, the system sends a mail to him.
Here, if the bid was rejected, we want to include the "Reason for Rejection", in the mail content. But there is no place to capture the "reason for rejection here".
Any Idea how to achieve this (i.e. 1. How to capture this information, 2. how to modify the mail content after capturing).
Ganapathi
Edited by: Ganapathi on Aug 22, 2011 8:51 PM

Any Ideas please....

I tried to sync my iPod touch to a new laptop and it deleted all of my music and videos. I called tech support and they told me to email iTunes and they would give it back to me. How do I do this??

I tried to sync my iPod touch to a new MacPro laptop and it deleted all of my music and videos. I called tech support and they told me to email iTunes and they would give it back to me. How do I do this??

Correct. When you update via iTunes all synced media that is not in your iTunes library will be lost.
As IO said before:
You can redownload most iTunes pruchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
I do not think it included audio books.

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Snow Leopard fails to install - Tech Support and Genius Bar can't fix it

I am having an exceedingly difficult time installing Snow Leopard. I have tried everything I can think of and tech support AND the Genius Bar have failed me so far.
The Details:
Every time I install SL it starts off well but sometime between 18 minutes remaining and 6 minutes remaining it fails. I get an error message that says there was an error that prevented installation. Looking in the installer log gives me a little more information. It usually has 15 or so errors, the last of which is always a very long line saying some package failed to install/unpack/be copied. The odd thing is that the file name is different every time.
So far I have tried:
Repairing the disk and installing
Installing from a different install DVD
Installing from external hard drive at the Genius Bar
Installing using RAM borrowed from the Genius Bar
Wiping the HD completely. I erased all my partitions and tried to install on a completely blank hard drive with a single HFS+ partition
I can only think of a few things that can cause the install to fail: DVD, optical drive, RAM, files on HDD, and HDD hardware. I think I've eliminated all those possibilities except HDD hardware. Changing that on a MacBook isn't trivial and I don't have one handy. Also I would think a HDD problem, or any hardware problem, would cause all sorts of errors and with the exception of this the machine has no serious problems and apps crash only occasionally. I've had no system crashes for as long as I can remember.
I have a Time Machine back up and have successfully restored my old Leopard System onto the MacBook (twice now) so at least I have the option to just give up on SL if I want to. As an aside, restoring from TM went well but not perfectly. Next time I install an OS I will be making a disk image backup. Does anyone else have any ideas? If you solve this problem I'll be eternally grateful and very impressed.
Thanks in advance
Jay

I'm sorry. I should have answered when you asked about RAM the first time. I have 2GB. I have tried installing with that, and I tried installing with RAM at the Genius Bar. I don't know how much the guy used at the Genius Bar.
Last night I restored from time machine so I currently have Leopard installed on the machine. After the restoration my email archive is little strange, I had to re-authorize iTunes and various other annoyances pop up but it runs without any problems.

Was updating my touch this morning when an error message occured, itunes became non responsive and was shut down. My touch is locked in the itunes update mode and my computer no longer recognizes the touch. How do I correct?

During update, error occured and Itunes became non-responsive and shut down. My Itouch is now locked in the itunes update screen and is no longer identified by my computer. How do I fix this problem?

Try this:
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
DFU Mode
Open iTunes and Connect the iPhone to your Mac
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPhone in Recovery Mode...
The Phone Screen will remain Black... Now Restore.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

EBP SUS NO PO RESPONSE and Invoice XML MESSAGE CREATED

Hi All,
We have configured EBP - SUS on SRM 7 server with extended classic scenario.PO's are transfering fine from EBP to SUS and are visible in SUS also expected follow on documents are PO response,Confirmation,Invoice.But wen we process the po and confirm all items no po response xml message is created and a local po response is created which is not transferred back to EBP.Later when we create a confirmation for the same po,it is transfered to EBP via serviceack xml message and is visible.
Finally wen v create a invoice it is also created locally and not tranferred to EBP,no xml message is created in this case too.
In XI we are using integration scenario which is based on SRM 5.5 contents.
Any kind of pointers will b appreciated.
Thanks.

Hi
Proxies are fine,also i check for events in define transaction type.Here are the values for both response and invoice evrything seems fine.
Description          SUS PO Purch.Ord.Rsp
Int. Number Range         01
Ext. Number Range         02
Status Profile
BTrans.Category      BUS2232
Description          SUS PO Confirmation
Partner Determ.Proc.
Text Schema          PCOS
Event Schema
Description          SUS Invoice
Int. Number Range         01
Ext. Number Range         02
Status Profile
BTrans.Category      BUS2234
Description          SUS Invoice
Partner Determ.Proc.
Text Schema          SUIV
Event Schema
EVENT DEFINITION
BUS2234     SUS Invoice     SUS Invoice
ERROR_OCURRED     An Error has Occurred
Any settings tat we need to do to trigger this invoice to create a xml message.Also we regenerated the authorization profiles but had effect on xml creation.
Thanks

Difference between Tech-Ed and Normal SAP Certification

Hi,
Is there any difference between SAP TechEd certification and other Normal certification (Other than Tech-Ed, conducted by SAP) ?
I am planning to give C_TBIT51_70, which is not in TechED
(TBIT40,TBIT50 and TBIT51).
Is there any experts who cleared this exam, please provide your inputs.
Thank you.
Shylesh

Hi Shyl,
The most important differences are:
1) The evaluation criteria and pass percentage !!
2) Certification fee
1) In teched, you will not be given any partial credit but the pass percentage is less than that of the exams which you take in other months.
For me the normal certfication pass percentage was 70 % for which the same in teched was 57% BUT REMEMBER NO PARTIAL CREDIT IN TECHED.
but the normal monthly exams would be granted partial marks for each question but percentage is 70.
2) The certification fee in teched also differs in the case. its less than that of direct certification.
BUT MY SUGGESTION IS GO FOR TECHED SINCE YOU LL HAVE GOOD EXPOSURE ON THE TECHNLOGY YOU DO. NEVER MISS IT!!
Hope it helps!!
Thanks!
Preethi.

The column headings in my Response and Summary views have disappeared

The column headings in my Response and Summary vews have disappeared. I have seen others have had this problem and that the work arounds discussed do not work.
Can Adobe please advise when this bug is going to be fixed?

Hi;
This is not likely to be a bug but users selecting all rows to clean up responses and deleting. Doing a "Crtl+A" will select the Header row - there is a warning dialog before allowing you to delete the header row but it still happens all the time:
See this FAQ for how to fix the Headers, if you already looked at the History you'll want to read the part about "touching" each fields label to "fix" the headers:
http://forums.adobe.com/docs/DOC-4071
Thanks,
Josh

My iphone is at tech service and since it is in guarantee period most probably they will give a new one.Thats why I want to deactivate or sign out my apple ID from that Iphone. Please help me, what shoud I do?

My iphone is at tech service and since it is in guarantee period most probably they will give a new one.Thats why I want to deactivate or sign out my apple ID from that Iphone. Please help me, what shoud I do?

Wow... you seriously over paid for an iPhone.
That probably explains why you have/had no clue you were purchasing a locked device and think it's an Apple problem to get it unlocked.

My I pad is non responsive, and the screen is full of coloured stripes. How do I fix that?

My brand new I pad 2 is non responsive and the screen is blac with horizontal coloured stripes.
How do I fix that?

You could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If that doesn't work then other things to try are a restore via your computer's iTunes, and then reset back to factory defaults. If none of them work then you may need to contact Apple.

Create "Sysadmin Read only" Responsibility and add to Application user.

Hi
I am using 11.5.10.2 (Single node installation) on RedHat LinuxAS4 OS. I have couple of requests from the users.
Issue 1:
The user has requested to "Sysadmin Read Only" Responsibility and attach that responsibility to his user. Please find below the request raised by the user.
Can u add query only access for Sysadmin responsibility as I need an option to check the values assigned to each profile option and other relevant functionalities in sys_admin responsibility.
Issue 2:
The user is unable to open two forms simuntaniously. I was asked to set a profile option for that, please let me know which profile option is that.
Thanks and Regards
Amith

Amith
Issue 1:
Refer the following thread
System Administrator Read-Only responsibility.
Issue 2:
Perform the following steps
System Administrator ->Security->Responsibility->Define
Query the responsibility for which u want to enable Multiform access
In the Menu Exclusions tab add
Type: Function
Name: Navigator: Disable Multiform
-HTH
Regards
Mahesh

Tech.spec and function spec

hi,
i want a good functional spec with the tech spec and pls if you could give me the detail code of that spec.
thanks in advance if i get a good material i may be giving 50 points since it is not possible to give fifty points i will manage with ten points.

Hi,
can you give me your mail id,so that i can send it to your mail id.
Regards,
Shalini

How to hide "Help" icon in "Tech Support and Training" channel in CLM

How to hide "Help" icon in "Tech Support and Training" channel in CLM.
Is there a way to link the Help icon to custom training pdf's rather than standard training pdf "buyer_online_help"
Regards,
Gurmeet

Hi Gurmeet
In order to display custom training PDF, an alternative approach could be to make use of workbench channel "Links". You can store the custom PDF on intranet and display the link under links channel.
Regards
Mudit Saini

Tech response and awards

Similar Messages

Maybe you are looking for