Technical Systems Not appearing  in Managed Sytem Configuration

Hi Experts,
I am doing Solman_setup after upgrade.I am in Managed system configuration step.I have synchronized Abap and java systems through RZ70 and NWA respectively to Solamn Local SLD and hence they are also appearing in LMDB (technical system tab).However when I am opening Managed System Configuration page  no technical system (Abap or Java) is   found (except solman Abap and solman Java) technical system tab page (find the screen shot for ur convenience ).Can any one help me out to find the solution.
Thanks
Aditya Roushan

Hi
Please check the Synchronization job  between SLD and LMDB is running fine.
Did you finish all the steps(SLD Setup) System Preparation?
If the issue still exist please de actviate the SLD and recreate again
Run the SLD and LMDB Sync job again after the recreation Step: SLD Setup
Kind Regards,
Phaneendra Kakani

Similar Messages

  • Technical System not appearing while creating Business System

    Hi
    We had already created business system and assigned a technical system and all the interfaces was working fine.
    Now we removed the technical system and created a new technical system, since we need to point to different server.
    I created a new technical system, oped the old business system and in integration tab, when i click on change technical system.
    The newly created technical system is not appearing.
    Thought of assigning the business system directly in technical system, but it is not allowing and i am getting message business system is already assigned.
    Can you pls help
    Regards
    Madhan D

    Hi Madhan,
    When you create a Business System, it will ask for the type of Technical system like Web AS ABAP, Web AS Java etc.
    So, the new TS type should match the TS type you selected for your BS so that you can see your TS in the dropdown, when you click on "Change" link.
    HTH,
    GP

  • I upgraded to iTunes 11.0. My iPod Nano 4th Version will sync, but music and playlists will not appear to manage and add more songs. Is there a fix?

    I upgraded to iTunes 11.0. My iPod Nano 4th Version will sync, but music and playlists will not appear to manage and add more songs. Is there a fix?

    If I go from 'Devices' to Summary and then Music, I only get one option-Sync Music,There is a box on this page but the options within it are grayed out. If I tick the Sync Music option I get this message-
    'Are you sure you want to remove existing music,films,ect, from this ipod and sync with this itunes library?
    'Music synced to (my ipods name) from other itunes libraries will be removed and items will be synced from this itunes library' I have only ever used itunes on this PC and the 'Manually manage music and videos' is ticked but
    that must be a default setting as I haven't ticked it.

  • Business Systems not appearing in the Integration Builder (Configuration)

    Hi Experts,
    I have created new business systems in the Integration Builder of my PI System.
    This is not appearing in the Integration Builder.
    I executed the delta cache in transcation SXI_CACHE but the issue is same. Please let me know what should I do to get the business systems.
    Thank you.
    Thanks
    Kasee

    Business system from SLD not visible in Integration Directory

  • Technical System Not reporting to Master SLD

    Hi
    We have  multiple SLDs in our landscape for each landscape. We have a Central SLD in our Solutiion Manager systems. All the SLDs are configured to transfer the data to the master SLD through the Data Bride which reports everyday.
    One of the SLD reports only ABAP systems to the master SLD. I dont see any java systems reporting to the master SLD from. The other SLDs reports both ABAP and JAVA systems well. SO I am wondering what could be the reaon for not reporting only Java systems that to onlyfrom one SLD system.
    Mahesh Shetty

    Hi Mahesh,
    There is a lil difference. For a double stack target system, on the ABAP side, we maintain SLD connection details in RZ70, SLDAPICUST and RFCs LCRSAPRFC and SAPSLDAPI. Likewise, in Java side of the target system, the SLD Data Supplier entry in Visual admin needs to be maintained too. This will ensure the correct functioning of SLD for both ABAP and Java stack.
    Once the above configurations are maintained correctly, in SLD-> Technical systems-> dropdown WEB AS ABAP will have the ABAP entry and WEB AS java dropdown will have the Java entries.
    Rgds,
    Soujanya

  • CHARM Tab does not appears -- solution manager

    Hi Experts,
    I want to configured CHARM but in tx SOLAR_PROJECT_ADMIN in System Landscape -- Change Request Tab does not appear
    Also tx  solar01 is locked! the project doc for example . But in scope a have not checked the link.
    Any clue?

    Hello,
    In SOLAR_PROJECT_ADMIN  are you creating a project or runing an analysis?
    The Analysis screen is not tabbed, it is a tree.
    Change request management apears under Solution.
    When you create a project, there is not a Change Management Tab.
    So are you refering to creating the project or performing the Analysis?
    Regards,
    Paul

  • No Hosts Found - Technical system not well defined

    We are performing Diagnostic configuration for managed system.We are trying to configure solution manager has managed system with ABAP and Java stack.
    Though we have defined the Java instances in the following format,system is throwing an error saying No hosts found,Technical system is not well defined - for solution managed Java.
    Instance                                                  server role                         server
    J2EESERVER_KRESSAPCRM_00     DISPATCHER Dispatcher     kressapcrm
    J2EESERVER_KRESSAPCRM_01     SERVER J2EE-Server     kressapcrm
    What might me the issue?
    Regards
    Shailaja

    Hi,
    All these details are entered in SMSY
    Abap stack header data:
    Message server : KRESSAPCRM
    System Number : 00
    Database : SOL
    Abap stack Instances data:
    Instance : KRESSAPCRM_SOL_00
    Server : KRESSAPCRM
    Java stack header data:
    Message server : KRESSAPCRM
    Installation Number : 0020190937
    Dispatcher : 2062900
    Database : SOL
    Java stack Instances data:
    Instance : J2EESERVER_KRESSAPCRM_00
    Server Role : J2EE server
    Server : KRESSAPCRM
    Regards
    Shailaja

  • Logical System not appearing in SLD

    Hello Friends,
    Logical System of SAP R/3 system is not appearing in SLD. The logical system is available in backend ABAP System. I have even run the RZ70 data collection programs as well. However, I am not able to populate the logical system names in SLD.
    I have put the same logical system names in the client tab of the technical system but in vain. The logical system field is non-editable and I believe it is always non-editable unless some technical system is not assigned to it.
    The logical system name is also not available in ID (if it is not in SLD then it won't be in ID as well).
    [The SLDCHECK is throwing exception 4. what to do for this? May be the data is not transfered because of this? Even though I have maintained proper password in SLDAPICUST!!!]
    Request your kind adivse on what can be done. Where can I lookout for possible errors.
    Thanks & Regards,
    Anand Patil

    Hi
    On SLD - > Technical System -> Client -> Logical System Name , generally It is Editable entity .
    If in Your Case , You can not change it, chech with ut basis Guy , for roles and authorisation against your Username ,
    Check the Same SLD Roles with some PI Service  User.
    Regards
    Prabhat Sharma.

  • SLD Business system not appearinn in Integration Directory Configuration

    Hello,
    I have configured a business system in SLD(defined a Technical system,assigned it to a business system),but when i go to
    Integration directory and assign a business system without a partner,I am not able to see this business system.
    can any one please help.
    regards
    kaushik

    environment -> clear SLD cache

  • Technical system not available in Integration tab of Busines System SLD

    Hi ,
      I am  creating a Business System in SLD(on Solution Manager) for XI system but not able to see any technical system from Integration tab of Business system.
       I have already created a technical system in SLD.
    Please suggest  what other settings I need to check.
    Thanks
    Bhaskar

    Hi,
    Clear the cache and try again.
    Go to Environment -
    > Click on Clear SLD data cache.
    If you still din't get then In the SLD goto technical system, in the dropdown box select your Technical system type(web as Java/....) and cleck on display, if it is there then it was created other wise it wasn't created.

  • Systems not appearing/Cannot search for systems

    Greetings,
    I have defined two systems that call BAPI's (via RFC) on an instance of SAP that we utilize for testing. Using Visual Composer 7.0, we were able to use the "Find Data" option to search our portal instance for systems, but this feature does not seem to be present in the CE 7.1 version of VC.
    We were initially trying to migrate the Visual Composer iViews that we created from our 7.0 portal to our CE 7.1 portal. We defined these two systems in the portal and assigned the correct permissions and connection strings before performing the migration. The migration wizard in VC asked us to define the new system names, but the dropdown box that is supposed to contain the defined systems was empty.
    My questions are...
    1. Even though we've defined the systems in CE 7.1, why are they not appearing during the migration process as options?
    2. In VC 7.1, the search function does lot list systems as an option. I have tried searching all of Portal Content, but no systems appear in the results. How do I search for systems defined in the portal so that I can define a data source?
    Thanks and I appreciate your help.
    -= Michael

    Hi Michael,
    first of all the connection to an ABAP system via portal system object as you have used it in VC7.0 should also work in VC7.1. Maybe there is an issue with your configuration. There is also another option to setup the connection via RFC connection in the SAP NetWeaver Administrator. Anyway I suggest that you try to establish a connection via RFC, which is described in the [Wiki|https://www.sdn.sap.com/irj/scn/wiki?path=/display/vc71/rfc+destination]. If this connection will work then you should investigate why the connection via system portal system object is not working.
    Please let me know if you have success with the RFC connection.
    Best Regards,
    Marcel

  • Payroll - Technical wagetypes not appearing on some empleyees payroll log

    Hi experts
    I am running a payroll. My problem is that some technical wagetypes dont appear on the payroll log of some employees eg /400 (tax). How can i fix the problem.
    Your assistance will be appreciated.

    Hello mathias ,
    The information provided is not sufficient to answer your questions. But since you have mentioned about /400 series, this means  tax wage type series. Have you configured Tax model, BSI connection etc.
    Arti

  • AS JAVA technical system not updated/registered in SLD

    Hi,
    We have setup the SLD bridge connection from our SLD with 7.0 SAP J2EE
    server which is our local SLD to SLD with 6.40 SAP J2EE server which is the master or central SLD. Actually we have this set up, that we have configured a local SLD for our Netweaver 2004s SR2 or Netweaver 7.0 system and connect it to the central SLD which is also a Netweaver system but of lower release, Netweaver 2004 SR1.
    Since Netweaver contains both ABAP and Java, I can see that our WAS ABAP technical system (of the SLD 7.0) was
    succesfully registered and updated on the central SLD 6.40 but I cannot
    register or update the WAS JAVA technical system (of the SLD 7.0) in the central SLD 6.40, but it can be updated in our local SLD which is then connected to the central SLD as mentioned.
    Since my update for the WAS ABAP was already working and its updated
    in the central SLD 6.40, what can we do to achieve the same result for the WAS
    JAVA? Because if it works with WAS ABAP, what is wrong then with WAS JAVA? What might be the cause or some other configurations to be made?
    Also can we synchronize the CIM updated with all the SLD? We want to
    see if we can just update the CIM content of SLD 6.40 and pushed this
    with the other SLD on the system e.g. SLD of 7.0.

    Hi,
    I think you should certain configurations for your system to be listed under SAp Java systems.
    1.Go to visual admin,c:\usr\sap\SID\JCxx\j2ee\admin
    run go.bat.
    Then go to services-----SLD Data supplier.
    go to Http settins under that,enter the details of central SLD you want to connect,
    hostname,http port,sld admin user and password.save it.
    go to CIM client settings,enter the same details there and save.
    Then check CIM client generation  test.it should be sucessfull.
    then trigger SLD data transfer at the top left corner.
    it also should be sucessfull.
    Then your system will be listed.
    2.may be you have to create a role called Lcr administrator with all Lcr* actions assigned to it.
    then this Lcr administrator role should be assigned to ur administrator user.
    hope this works.........
    reward points if helpful............

  • Technical Systems Not Reflected in SLD

    Hi Experts,
    Good day.
    We are configuring administrative SLD as part of NWA setup in Solman dual stack as per Monitoring Setup Guide Netweaver 7.0 SPS 16. We have a separate productive SLD in XI.
    As per the document, we need to have the data from XI forwarded to our Solman system. We have completed required settings in SLDAPICUST, RFC connections, JCO RFC Provider and SLD Data Supplier, added new data supplier bridge in XI pointing to our Solman system and afterwards, triggered data transfer from XI through RZ70 and SLD Data Supplier which is successful.
    However, only the ABAP and Java stack of our solman gets reflected in our administrative SLD.
    Via transaction SLDCHECK from ABAP, we're getting the following error:
    Calling function EXCHANGE_PROFILE_GET_PARAMETER
    Retrieving data from the XI Profile...
    Function call returned exception code     3
    Access to the XI Profile is currently disrupted.
    From XI SLD logs, we have the  following error:
    #21 08/12/2009 14:49:46.531 [Thread-38] WARNING com.sap.lcr.sagent.BuilderDirector: Warning: SLD target system http://<host>:<port>/sld not available (incoming data will be ignored).
    Thrown:
    com.sap.lcr.api.cimclient.CIMClientException: Received response is not a CIM Operation Response! Check "http://<host>:<port>/sld" is the correct URL for the SLD CIM Object Manager and that user "User***" has access to the SLD via http.
    at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:434)
    at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:581)
    at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:195)
    at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:147)
    at com.sap.lcr.api.cimclient.CIMOMClient.getCIMClass(CIMOMClient.java:538)
    at com.sap.lcr.api.cimclient.CIMClient.getCIMClass(CIMClient.java:1185)
    at com.sap.lcr.api.cimclient.CIMClient.getCIMClass(CIMClient.java:1196)
    at com.sap.lcr.api.cimclient.CIMClient.ping(CIMClient.java:290)
    at com.sap.lcr.sagent.BuilderDirector.performWork(BuilderDirector.java:645)
    at com.sap.lcr.sagent.BuilderDirector.performWork(BuilderDirector.java:545)
    at com.sap.lcr.sagent.BuilderDirector.run(BuilderDirector.java:459)
    Thanks in advance for your inputs.
    Best Regards,
    Jen

    Joel,
    Please upgrade your SLD Data Model and CR and then see if that makes difference.
    Also check Link:[Note 954820 - Compatibility of SLD in the system landscape]
    Thanks,
    Digesh Joshi

  • Status of elements not appearing in Management Cockpit

    The Problem is as follows:                                                
    when you look into the management cockpit and ask to display data from, for
    example, December 2004, the cockpit shows all the four walls with
    elements without status, when, in fact, all the elements have a status.
    You can notice they have a status (green, yellow or red) when you click
    and see the detail (for example, the financial situation is shown with
    no status, but if you go into financials and then to the general
    overview, for example, you can see that you've got maps and status
    there. So, in the financial situation you should have a status as well).
    I am using SAP_BW 3.10
    Looking forward to hearing from you.
    Regards,
    Deepak

    hi,
    Usually when I browse sourcing area the last work item should be my shopping cart line item.
    But I am not able to find the line item in sourcing area,I searched in all possible ways,do you think I missed some sort of settings regarding this.
    regards,
    IGA.

Maybe you are looking for