AS JAVA technical system not updated/registered in SLD

Hi,
We have setup the SLD bridge connection from our SLD with 7.0 SAP J2EE
server which is our local SLD to SLD with 6.40 SAP J2EE server which is the master or central SLD. Actually we have this set up, that we have configured a local SLD for our Netweaver 2004s SR2 or Netweaver 7.0 system and connect it to the central SLD which is also a Netweaver system but of lower release, Netweaver 2004 SR1.
Since Netweaver contains both ABAP and Java, I can see that our WAS ABAP technical system (of the SLD 7.0) was
succesfully registered and updated on the central SLD 6.40 but I cannot
register or update the WAS JAVA technical system (of the SLD 7.0) in the central SLD 6.40, but it can be updated in our local SLD which is then connected to the central SLD as mentioned.
Since my update for the WAS ABAP was already working and its updated
in the central SLD 6.40, what can we do to achieve the same result for the WAS
JAVA? Because if it works with WAS ABAP, what is wrong then with WAS JAVA? What might be the cause or some other configurations to be made?
Also can we synchronize the CIM updated with all the SLD? We want to
see if we can just update the CIM content of SLD 6.40 and pushed this
with the other SLD on the system e.g. SLD of 7.0.

Hi,
I think you should certain configurations for your system to be listed under SAp Java systems.
1.Go to visual admin,c:\usr\sap\SID\JCxx\j2ee\admin
run go.bat.
Then go to services-----SLD Data supplier.
go to Http settins under that,enter the details of central SLD you want to connect,
hostname,http port,sld admin user and password.save it.
go to CIM client settings,enter the same details there and save.
Then check CIM client generation test.it should be sucessfull.
then trigger SLD data transfer at the top left corner.
it also should be sucessfull.
Then your system will be listed.
2.may be you have to create a role called Lcr administrator with all Lcr* actions assigned to it.
then this Lcr administrator role should be assigned to ur administrator user.
hope this works.........
reward points if helpful............

Similar Messages

Technical System Not reporting to Master SLD

Hi
We have multiple SLDs in our landscape for each landscape. We have a Central SLD in our Solutiion Manager systems. All the SLDs are configured to transfer the data to the master SLD through the Data Bride which reports everyday.
One of the SLD reports only ABAP systems to the master SLD. I dont see any java systems reporting to the master SLD from. The other SLDs reports both ABAP and JAVA systems well. SO I am wondering what could be the reaon for not reporting only Java systems that to onlyfrom one SLD system.
Mahesh Shetty

Hi Mahesh,
There is a lil difference. For a double stack target system, on the ABAP side, we maintain SLD connection details in RZ70, SLDAPICUST and RFCs LCRSAPRFC and SAPSLDAPI. Likewise, in Java side of the target system, the SLD Data Supplier entry in Visual admin needs to be maintained too. This will ensure the correct functioning of SLD for both ABAP and Java stack.
Once the above configurations are maintained correctly, in SLD-> Technical systems-> dropdown WEB AS ABAP will have the ABAP entry and WEB AS java dropdown will have the Java entries.
Rgds,
Soujanya

Technical Systems Not appearing in Managed Sytem Configuration

Hi Experts,
I am doing Solman_setup after upgrade.I am in Managed system configuration step.I have synchronized Abap and java systems through RZ70 and NWA respectively to Solamn Local SLD and hence they are also appearing in LMDB (technical system tab).However when I am opening Managed System Configuration page no technical system (Abap or Java) is found (except solman Abap and solman Java) technical system tab page (find the screen shot for ur convenience ).Can any one help me out to find the solution.
Thanks
Aditya Roushan

Hi
Please check the Synchronization job between SLD and LMDB is running fine.
Did you finish all the steps(SLD Setup) System Preparation?
If the issue still exist please de actviate the SLD and recreate again
Run the SLD and LMDB Sync job again after the recreation Step: SLD Setup
Kind Regards,
Phaneendra Kakani

Define Web AS JAVA Technical System in SLD

I deleted WAS JAVA Technical System in SLD by mistake.
Later I've tried to redefine the it in technical system landscape, but some technical information such as URL, host, database, instance disappeared.
Is there a special steps to define WAS JAVA technical system?
Thanks

Please send me a mail to [email protected] , I will send you the page (in bmp format) with all the definitions...
Hope it will help you

WEBAS Java Technical system

Hi all,
Could you please give me an example of an application for which we would need to create WEB AS JAVA technical system?
Regards,
Ashish

Hi,
<i>Could you please give me an example of an application for which we would need to create WEB AS JAVA technical system?</i>
In case of java proxies,u will create java proxies from interfaces in IR.
But u would need some java application which will call methods of those java proxies,these proxies can be called using EJBs in java application.
You will create EJBs from thses proxies and then use one java application to call these EJBs.
When this java application gets executed it sends proxy message to XI,XI identifies this message with the help of technical ystem which should be of type WEBAS JAVA,because the server on which u deploy ur JAVA application is of type WAEAS JAVA.
So u need to create WEBAS JAVA technical system to send message from JAVA proxies.
Thanks.

Not Updating in Central SLD

Hello,
Upon performing our daily system checks, one of the item is to monitor the sending of SLD data of the installed systems in the System Landscape to the Central SLD which in our case is the XI box. Four of our systems having Java stack did not update. With that, i performed the necessary steps to trigger it so that it'll update in both Web AS ABAP and Web AS Java. With regards to ABAP, i triggered and activated the system to collect and send SLD data via RZ70. As for the Java Systems, i triggered and activated it in the SLD Data Supplier in the visual admin. I performed the CIMOM test and it was a success. Furthermore, i've triggered the send SLD data. In order to check whether it worked or not, i've checked the respective local SLDs of the systems and viewed that it is updated there for both ABAP and JAVA. Furthermore, i've checked the system landscape and viewed the systems are updated for both ABAP and JAVA except for our APO system, both ABAP and JAVA as well. As another step, i reconfigured the Data supplier in the administration of the SLD of APO in order to make sure that the password of xisuper is correct or something. However, until now, it has yet to be updated.
Hope you could help me.
Thanks so much!

Have you checked the Log on the receiving and sending SLDs to see of there is an error?

Technical system in client SLD is not updated in master SLD

Hi,
We are running on PI 7.0. We have 2 SLDs in (system A and system B) and both the SLD's are connected with additional SLD (system C). System C' SLD dont have system B's technical system for Web AS JAVA at all and Web AS ABAP only last updated on 03/05/2009. What and where I should check on the configurations if anything is missing. System A's techincal system are being updated daily to system C's SLD.
Thanks.
Regards,
Thava

may be you can check whether the sld data supplier is updating the data or not
http://help.sap.com/saphelp_nw04s/helpdata/en/8a/361fb70681234fb7d3af841ec2383e/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ea/cd2e807e0e45bf9da67354f452fc05/content.htm
and for ABAP, can be checked in RZ70
http://help.sap.com/saphelp_nw04/helpdata/en/ea/cd2e807e0e45bf9da67354f452fc05/frameset.htm
In system B's sld, check whether an sld is added towards the SLD server of C

Technical system not available in Integration tab of Busines System SLD

Hi ,
I am creating a Business System in SLD(on Solution Manager) for XI system but not able to see any technical system from Integration tab of Business system.
I have already created a technical system in SLD.
Please suggest what other settings I need to check.
Thanks
Bhaskar

Hi,
Clear the cache and try again.
Go to Environment -
> Click on Clear SLD data cache.
If you still din't get then In the SLD goto technical system, in the dropdown box select your Technical system type(web as Java/....) and cleck on display, if it is there then it was created other wise it wasn't created.

Technical System not appearing while creating Business System

Hi
We had already created business system and assigned a technical system and all the interfaces was working fine.
Now we removed the technical system and created a new technical system, since we need to point to different server.
I created a new technical system, oped the old business system and in integration tab, when i click on change technical system.
The newly created technical system is not appearing.
Thought of assigning the business system directly in technical system, but it is not allowing and i am getting message business system is already assigned.
Can you pls help
Regards
Madhan D

Hi Madhan,
When you create a Business System, it will ask for the type of Technical system like Web AS ABAP, Web AS Java etc.
So, the new TS type should match the TS type you selected for your BS so that you can see your TS in the dropdown, when you click on "Change" link.
HTH,
GP

No Hosts Found - Technical system not well defined

We are performing Diagnostic configuration for managed system.We are trying to configure solution manager has managed system with ABAP and Java stack.
Though we have defined the Java instances in the following format,system is throwing an error saying No hosts found,Technical system is not well defined - for solution managed Java.
Instance                                                  server role                         server
J2EESERVER_KRESSAPCRM_00     DISPATCHER Dispatcher     kressapcrm
J2EESERVER_KRESSAPCRM_01     SERVER J2EE-Server     kressapcrm
What might me the issue?
Regards
Shailaja

Hi,
All these details are entered in SMSY
Abap stack header data:
Message server : KRESSAPCRM
System Number : 00
Database : SOL
Abap stack Instances data:
Instance : KRESSAPCRM_SOL_00
Server : KRESSAPCRM
Java stack header data:
Message server : KRESSAPCRM
Installation Number : 0020190937
Dispatcher : 2062900
Database : SOL
Java stack Instances data:
Instance : J2EESERVER_KRESSAPCRM_00
Server Role : J2EE server
Server : KRESSAPCRM
Regards
Shailaja

Technical Systems Not Reflected in SLD

Hi Experts,
Good day.
We are configuring administrative SLD as part of NWA setup in Solman dual stack as per Monitoring Setup Guide Netweaver 7.0 SPS 16. We have a separate productive SLD in XI.
As per the document, we need to have the data from XI forwarded to our Solman system. We have completed required settings in SLDAPICUST, RFC connections, JCO RFC Provider and SLD Data Supplier, added new data supplier bridge in XI pointing to our Solman system and afterwards, triggered data transfer from XI through RZ70 and SLD Data Supplier which is successful.
However, only the ABAP and Java stack of our solman gets reflected in our administrative SLD.
Via transaction SLDCHECK from ABAP, we're getting the following error:
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call returned exception code 3
Access to the XI Profile is currently disrupted.
From XI SLD logs, we have the following error:
#21 08/12/2009 14:49:46.531 [Thread-38] WARNING com.sap.lcr.sagent.BuilderDirector: Warning: SLD target system http://<host>:<port>/sld not available (incoming data will be ignored).
Thrown:
com.sap.lcr.api.cimclient.CIMClientException: Received response is not a CIM Operation Response! Check "http://<host>:<port>/sld" is the correct URL for the SLD CIM Object Manager and that user "User***" has access to the SLD via http.
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:434)
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:581)
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:195)
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:147)
at com.sap.lcr.api.cimclient.CIMOMClient.getCIMClass(CIMOMClient.java:538)
at com.sap.lcr.api.cimclient.CIMClient.getCIMClass(CIMClient.java:1185)
at com.sap.lcr.api.cimclient.CIMClient.getCIMClass(CIMClient.java:1196)
at com.sap.lcr.api.cimclient.CIMClient.ping(CIMClient.java:290)
at com.sap.lcr.sagent.BuilderDirector.performWork(BuilderDirector.java:645)
at com.sap.lcr.sagent.BuilderDirector.performWork(BuilderDirector.java:545)
at com.sap.lcr.sagent.BuilderDirector.run(BuilderDirector.java:459)
Thanks in advance for your inputs.
Best Regards,
Jen

Joel,
Please upgrade your SLD Data Model and CR and then see if that makes difference.
Also check Link:[Note 954820 - Compatibility of SLD in the system landscape]
Thanks,
Digesh Joshi

PORDCR102 - Logical system not updated in EKKO

Hi,
I am using idoc PORDCR102 to create Purchase Orders.
The PO is created successfully but the LOGSY field in EKKO table is not updated with the value from field LOGSYSTEM in the header segment of the IDOC.
Kindly do the needful.
Thanks in advance.

When you change it in SLD and if not getting replected in the ID...make sure you run the cache again, perofmr the comeplete cache....
there is an option under the adapter specific mesage attributes compare with SLD you can click that, is nthing happening after clicking it?
Run the cache in the ID are there any errors there?
check the RWB cache monitoring is everything green there?

Problem in Technical System Creation Wizard in Portal SLD

Hi
When I am trying to Create New Technical System for WEB AS ABAP, I am getting the following error at the Installed Production phase
in the Portal SLD
*CIM_ERR_FAILED: Unable to execute createInstance() request, exclusive write mode is enabled*
Please help
Regards
Soumya Dasgupta

HI ,
Thank you for spend your valuable time for my problem
But my main problem is, when i am going to http://hostname:portno/sld page,
all those are not in active mode. i mean when i am selecting any function it showing sld is not configured. please do sld configuration. sld and nwdi related users are also not there in user administration. I cant understand why sld is not configured.
coz sld is configured if , we select web as java component in installation time . i dont know web as java component is selected or not. but when i am going to http://hostname:portno/ irj/portal, it showing user , content , system administration tabs . and every thing is working fine.
IN case if i did not select web as java component in installation time, may be portal also should not be configured. But here i am able to access portal. but in case of sld , it is showing error message. what is hell with sld realted problem. Please give reply.
reply will highly appreciated. Thank you.

Local SLD not updating a central SLD

Hi,
In my company landscape, I have
SolMan7.1 with Central SLD (Let's call this SLDA)
Portal 7.02 with local SLD (Let's call this SLDB)
ECC6
Both the Portal and ECC systems are updating SLDB, so I can see both technical systems in SLDB.
SolMan is updating SLDA, so I can see SolMan technical system in SLDA.
I linked SLDB to SLDA via
From SLDB> administration> data suppliers --> add SLDA
For this setting, I use the user SLDDSUSER, which have a role LcrInstanceWriterAll.
The problem now is SLDA does not get the data from SLDB. In SLDA, I see only the SolMan Technical System.
How often does SLDB update SLDA? Can we manually trigger an update SLDB->SDLA?
How can we troubleshoot the SLDB -> SLDA update?
What else needs to be configured other than "From SLDB> administration> data suppliers --> add SLDA" ?
Thanks
Edited by: Nick Foo on Sep 27, 2011 3:53 AM

Hi Sunny,
yes I have done those steps. Very short and easy setup steps to link to another SLD.
OK, just one thing to confirm here.
After Add SLD, the SLD URL syntax should be http://host:port correct?
I have tried all sorts of entires for the URL
http://host:port
http://host:port/sld
http://host:port/
All not working
Checked the user, user is ok, even tried giving the user Administrator role and still not working

Data not Updated Automatically in SLD to XI Integration Builder

I am trying to create a new software component in the SLD for use with our XI machine. However, when I do this, the component does not appear in the XI Integration Builder.
I have looked at the Automatically Updated Data page of the central SLD, and noticed that our XI J2EE system has not Auto-Updated with the SLD for quite some time, if ever.
Can somebody please give me some pointers how to sheck/configure this? Also, is there a way to update the information between the SLD and the XI system manually?
Kind Regards,
Tony.

I think the problem is the system cannot actually see the SLD for some reason.
If I try to access the SLD using the DNS name, I am unable to do so:
http://dnsname:52300/sld/index.html
However, if I use the IP address direct, I can do so:
http://192.xxx.xxx.xxx:52300/sld/index.html
I notice that when I try to access the SLD from the XI start page, the link is using the http://dnsname:52300/sld/index.html form, which isn't working.
Also, when I try to Import Software Component Versions from the Integration Builder menu, I get the error:
com.sap.aii.ibrep.client.swc.ExtSwcAccessException: Unable to read software component versions from System Landscape Directory "dnsname:52300"
So I'm thinking this may be some kind of DNS error, but I don't know how to resolve it.
Any clues?

AS JAVA technical system not updated/registered in SLD

Similar Messages

Maybe you are looking for