Tecra A9 - Power Saver crashes - fatal error has occured code: 0x2

Hi,
today, when I switched on my computer the power saver began to crash.
I restarted the computer several times and the result always is - A fatal error has occured. This program will be terminated. code: 0x2.
This error pops out even when I try to reinstall the application.
May be this has something to do with the service pack 3 I installed couple a days ago.
Anyone has an idea ?
Martin Vassilev.

I saw this error long time ago with WXP. In my opinion it has nothing to do with SP3.
My experience says you will not be able to fix this. There is something wrong in registry entries and reinstallation will not help at all.
Only one method can help, the most radical one, new OS installation using recovery media.

Similar Messages

  • A fatal error has occurred and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.   Please restart Adobe Captivate.

    I was trying to capture a simulation when a pop-up window came with this error:
    "A fatal error has occurred and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.Please restart Adobe Captivate."
    I tried every possible solution but i am getting the same error. Even now, i am not able to open a blank project. I cleared Preferences and Cache, Restarted the system, uninstalled and re-installed captivate but the error occurs.
    Please help.

    Having admin rights is not the same as 'Run Captivate as administrator'. For the last, right-click on the start icon for Captivate and check 'Run as administrator'. Or click on Advanced, where you can check the option to always run as administrator.
    Another possibility could be a corrupt font somewhere. I forgot to ask which version you are using (exact number).

  • Fatal Error has occured and the application is being terminated

    It seems that Captivate is eating my projects.  I've started my second project (after completing my first without any errors) and I'm constintly getting corrupted files.  It set me back at least a few hours worth of work.  So I started creating backup files every 10mins, regardless of how much work i've done.  Everything was going fine, until I took an hour break and went to resume my work.
    When I try to open my file I get the following pop up message when trying to open my file: "Adobe Captivate - A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folder as .cpbackup files.  Please restart Adobe Captivate."
    I can click on the program workspace and not click ok on the error message to keep the file open.  I see my slides and objects, but all the text is missing.
    I'm using Captivate 5.5 and windows 7 64.  Within Captivate, I'm using standard objects with importing MP3 audio files and some Photoshop images.  I have a total of 4 slides with 1 being 3.5mins long and the rest are less than 1min.
    When I first started having this problem, I thought maybe the variable files were corrupte so I deleted the Users/name/appdata/local/adobe/Captivate5.5 directory to see if that was the issue.  That was before this last stint of errors.
    I tried opening a backup that was like 10 saves ago, but it displays the same message.
    I'm not sure what to do next.

    Failed to back up the data. A fatal error has occured and the application is being terminated.
    This question is Not Answered.(Mark as assumed answered)
    hi,
    I am working on a content development using captivate 5.5. all of sudden I am not able slide view I am not able to view the text captions in slide view but i am able to see the text caption in Filmstrip. and when I am selecting another side it throwing below error and application ends.
    Adobe Captivate
    A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.
    Please restart Adobe Captivate.
    OK 
    I have a deliverable by this weekend if some can help to resolve this issue will be appreciated.
    Note: when first time it crashed, I re-created the course again from scratch and its crashed again. I have multiple attempt to finish this course but no luck.
    Please help me out to deliver my work.
    Thanks
    CD

  • Failed to back up the data. A fatal error has occured and the application is being terminated.

    hi,
    I am working on a content development using captivate 5.5. all of sudden I am not able slide view I am not able to view the text captions in slide view but i am able to see the text caption in Filmstrip. and when I am selecting another side it throwing below error and application ends.
    Adobe Captivate
    A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.
    Please restart Adobe Captivate.
    OK  
    I have a deliverable by this weekend if some can help to resolve this issue will be appreciated.
    Note: when first time it crashed, I re-created the course again from scratch and its crashed again. I have multiple attempt to finish this course but no luck.
    Please help me out to deliver my work.
    Thanks
    CD

    We have the exact same problem.Renaming the backup file per this post http://forums.adobe.com/message/4055726 didn't work. I can open the file and see the text boxes even though they're now showing as empty. Is there any way to recover the file?
    Yes, we were using a network drive but now we've switched to locally stored content.

  • I have Maverick 10.9.1 installed I scanned a photo on my HA D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only.

    I have Maverick 10.9.1 installed I scanned a photo on my HP D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only.

    Read the user manual that came w/the scanner and/or contact HP Support.
    http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download 
    A scanner driver you may wish to consider:  VueScan Scanner Software

  • A fatal error has occurred while updating your device's software. Please try again.

    when the installation process is finished.. the reboot comes nxt and my BB device working now,, after a few minutes, it was appear that  "A fatal error has occurred while updating your device's software. Please try again" and i disconnected my device.. my question is.. is this error affect the stability or working of my DEVICE?
    I need your answer
    Solved!
    Go to Solution.

    Hi pasakaw
    Have you intrepted the update process in anyway .. maybe something gone wrong while doing this software update.Currently  what is the status of your BlackBerry  is it working properly ? 
    If you feel any problem then you should try an OS reload using desktop software which will fix any software glitchs.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Illustrator 6 won't save! Unkown error has occured!

    Illustrator won't let me save! It says "Unknown error has occured." I'm beyond frustrated at this point! Help! I only have line work and text I placed from AutoCAD as a DWG file on the artboard and I was going to color the rooms in Illustrator.

    Which system?
    Where are you trying to save?

  • Power Save Utility fatal error 0x51 on Satellite M70

    I have just joined my M70 to a domain (SBS 2003) and get this message when I login to the domain.
    If I logon to the local user account on the laptop then it works fine.
    If I go to power options in control panel and select a different power scheme then the error goes away but I cannot select the TOSHIBA Power Save sheme in the schemes combo.
    Please help
    Cheers
    Dave

    Possibly the Power saver Utility and the Power saver driver are not installed for all user accounts on the M70.
    Or all user accounts are not authorized to use the Power saver Utility and the Power saver driver.
    On the Toshiba driver page you can find the Toshiba Power saver utility and the Toshiba power saver driver.
    Both applications must be installed and must run together.
    >If I go to power options in control panel and select a different power scheme then the error goes away but I cannot select the TOSHIBA Power Save scheme in the schemes combo.
    This is clear. If the Toshiba power saver scheme will be NOT chosen in the Windows Power Options then you will be not able to use the Toshiba power saver.

  • A Fatal Error Has Occured - Captivate 6

    Hi there, I have seen some threads on different error issues of Captivate, but mine is worse.
    Since the Captivate 4 installed in my office PC, it never ran smooth. Our IT purchased version 6 for PC with hope to improve performance. But since day one, it has never worked.
    First, it refused to boot, because the folder 'My Adobe Captivate Projects' was set to be installed in 'user's documents' folder, as by default. There wasn't much space in that folder because our company PC was set to limit the users' personal space, and I wasn't able to ask it to install in another folder (such as C drive, which would solve my problem). This folder wasn't installed at first. My Captivate opens then quits instantly. Our IT came and manually copied the 'My Adobe Captivate Projects\Layouts' folder from another computer which has it installed. Now I have one file named White.cptm in the folder named 'My Adobe Captivate Projects\Layouts\6_0\en_US'. That's the only Captivate file I have under Documents.
    After adding the 'My Adobe Captivate Projects' folder, it can be opened. But as soon as I set to 'capture', it quits with fatal error message within 6 seconds into capturing. The temp folder, the export folder and cache all set to D drive (local drive). I can not open someone else's project files, I can not record, or any other operations.
    Our IT came in again, we did a major clean up of all temp files, cache, etc... Still no luck, same fatal error. The message look like this (classical, like many users')
    Could anyone tell me where has gone wrong? How can I ask Captivate to NOT READ FROM MY DOCUMENT FOLDER, instead I move everything to C drive (where rest of Captivate programme files are located)? Or there is a problem somewhere else?
    I would be very greatful if someone can give a hint...!
    OS: Windows 7 Enterprise. Intel Celeron 2.5GHz. Ram 8GB.

    Thanks very much for your speedy answer! I tried hard to change it without any result, so I expected it could not be done...
    Since I cleaned up my personal space just for Captivate, I will not store anything in my document, to make space. Now technically there is enough space to work with.
    I have already set my preference settings to export/save/cache/whatsoever into D drive. It was the first tihng I attempted. I think the problem lays deeper though.
    Now when I open the programe, it refuses to show me more than the welcome screen.
    I can click 'blank project', then click on one of the default values, then OK. Nothing happens, I am back at welcome screen.
    The only button actually can perform is the capture (software stimulation). If I start capture, it will show me fatal error instantly.
    Everytime I open it, I would get stuck in one of the steps, today here, tomorrow there...I dont think I can have IT upgraded it very soon. So I try to solve this problem in the meantime... I will ask them to make it Admin for me, and see how it goes.
    Do you know if there could be other things I could try?
    Thanks a million.

  • A fatal error has occured while updating your device's software

    I have a problem I hope you guys can help me.
    Blackberry Model: 8820
    Device Software version: 4.5.0.55
    Desktop Software version: 4.7.0.37
    Carrier: Singapore Telecom Mobile Pte Ltd(https://www.blackberry.com/Downloads/browseSoftware.do)
    Everytime I start up my desktop software, it would prompt me that there are newer versions for some of the applications in my blackberry such as my browser, brickbreaker etc. So I followed through their instructions to install these updates. When it reached step 3/11, an error would occur while it say it was trying to turn on my radio
    Here's the screenshot of the error:
    [URL=http://img199.imageshack.us/i/errortac.jpg/][IMG]http://img199.imageshack.us/img199/761/errortac.th.jpg[/IMG][/URL]
    But I do observed that @ task 1/11, it switched off my radio. @ task 3/11 it tried to switch back on again. thats when the error occured.
    when I unplugged my device after the error, I saw that my mobile connection was off and my blackberry had to re-connect again. I do admit that my area has pretty bad reception, but that cant be the problem right?
    On top of that, maybe I also like to pop another 2 questions:
    1) Why is it I cant set up my email? I followed the instructions here:
    http://na.blackberry.com/eng/support/blackberry101/setup.jsp#tab_tab_email
    but my setup wizard dont have the option to select "I want to create or add an email address"
    I only gives me the option of the enterprise mail
    2) I tried to browse to to te blackberry website using my blackberry, but its says my device is not supported. Any way to solve this?
    Message Edited by howb21 on 07-09-2009 12:44 AM

    does this help ?
    http://www.blackberry.com/btsc/KB02696
    Unable to complete loading operation. Fatal error occurred when updating handheld
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • A fatal error has occured : Adobe Captivate 5.5

    Hi everyone,
    I am currently working on a simulation project on Captivate 5.5 and I finished it. But when I decided to open it again, it just crashed saying this :
    I noticed that every textcaption are empty, it's probably an error linked to that, but I still don't really understand what happened and I could not publish it before this error occured...baah...
    I really need some help for this because it is not the first time that I see this (already lost more than 30hours of work because of this error...)
    Usually, when this error shows up, i recreate the project and it works fine, but this time, doing it twice is just a huge lost of time...
    I even enabled back up, and saved it in different versions while I was creating the project in case of this error happens, but every single saved/backup files has this same error...
    Any working advices are welcome.
    Justin

    Hi Per, Rod,
    Have been following this thread since the start, and 'biting my tongue' not to jump in, but since the convo is 'closed' now, will add my opinion about tools.
    BTW Per Rod lives in Australia, not in the US and I'm from Belgium. You seem to have a Scandinavian name, although your surname sounds even Dutch (my mother tongue)
    The choice of tools depend a lot on the goals. Being just a teacher, while Rod is a developer, my view on teaching has changed a lot in my career. And when I was looking for a tool to help me for realising my dream: personalising learning assets, pushing students to take responsability for their learning, make them more active and collaborative I have chosen for Captivate some years ago over other tools. The tweaking possibilities, the way I could apply interactivity and the ease for creation of software trainings/simulations were at that point my reason. And I use Camtasia to create demonstrations, but demonstrations do not really fit in my present 'philosophy', so they will be used as FMR inside Captivate or to show more complex techniques where Captivate with its more limited FMR fails. I do use Lectora for more theoretical courses, combined with Captivate clips. I never used Articulate however, because it is based on presentations which I do not consider a good starting point in my view. Captivate is not easy, if you want to use its full power, compared with Camtasia, but find it worthwhile because I can use it for all kinds of eLearning assets, which up till now (do not yet include the more recent released ZebraZapps or the future Storyline) I couldn't find in concurrent tools. Something that hasn't be mentioned is the integration possibilities of the eLearning Suite which makes adapting assets (graphical in PS, audio in AU and animations in FL) easier.
    Will certainly explore ZebraZapps and Storyline as well, as usual what I tried to convey here, can easily change in the future.
    Lilybiri

  • If a site uses a Youtube video, I can't run it, it crashes (An Error has occured), but I can run it on the Youtube site.

    Well I tried running a lesson on Khan. http://www.khanacademy.org/video/scale-of-earth-and--sun?playlist=Cosmology%20and%20Astronomy

    its not facebook itself.its the video's on facebook.my friends got iphones and the rotate....?????

  • An authentication error has occured (Code: 0x607)

    Hi all,
    This one is driving me NUTS! The problem itself is when I go to connect to a session host using a web access server I get the error in the title.  This is only happening to some of my session hosts and not all.  I have compared them and can't find
    a single difference.  I also cant find anything useful in the event logs about this.  Below is my setup.
    A full RDS environment using all Windows Server 2012 Data Center.  Nothing 2008 R2.  All Clean installs.
    I have 6 servers a VM's split evenly between 2 ESXi 5.1 Hosts.
    1. MP-RDP-CB1.inucoda.net (Connection Broker 1)
    2. MP-RDP-CB2.inucoda.net (Connection Broker 2)
    3. MP-RDP-GW1.inucoda.net (Gateway Server 1)
    4. MP-RDP-GW2.inucoda.net (Gateway Server 2)
    5. MP-RDP-WA1.inucoda.net (Web Access Server 1)
    6. MP-RDP-WA2.inucoda.net (Web Access Server 2)
    inucoda.net is an network that is the Domain that all servers are joined to via 2 Domain Controllers splits between each ESXi Host.
    My outside domain that you can get to from the web is ucoda.net
    The connection brokers have all servers used including session hosts added to the server pool and are configured in HA mode. They use a SQL Server 2012 Fail-over cluster that is on a separate set of VMs for their database and the DNS is configured as round
    robin. MP-RDP-CB.inucoda.net.  There are two entries of this each with one of the two IPs of the CB1 and CB2 servers.
    On each CB server there is a RDS License server role installed with CALs installed and activated/registered. Both LIC servers have been added to the RDS deployment properties.
    The GW servers each have the NLB role installed with an extra network adepter for NLB use. There is a DNS name of MP-RDP-GW.inucoda.net that points to the NLB IP of the GW Cluster.  Also both GW servers were added to the GW Server Farm part of the the
    GW properties.  
    The WA servers are also in a NLB Cluster with an extra adapter and a DNS of MP-RDP-WA.inucoda.net pointing to the NLB IP.
    Up steam from our inside Windows Domain at our ISP level there is a DNS entry of MP-RDP-WA.ucdoa.net and it points to the NLB IP of the WA NLB Cluster.  (This is not a public IP, we require you be on our VPN to be able to access the IP).
    For certificates we have a Comodo issued wildcard of *.ucoda.net with the corresponding Comodo Root Trust and Intermediate Certs. We also have a wildcard *.inucoda.net created by our inside CA.
    The *.inucoda.net cert is used for the CB SSO, CB Publishing, and GW while the *.ucoda.net cert is used for the WA.
    All session hosts have been configured to use the *.inucoda.net for their RDP sessions.
    I can confirm that the *ucoda.net cert is used for the WA part and all other parts are reporting the *inucoda.net, all with no errors or warnings.
    For each session collection only one session host is used with no apps, (just RDP).  Security is set to only use NLA, SSL 1.0, High.
    On each session host I have verified that the *inucoda and *ucoda certs are installed and the internal CA and Comodo CA/Intermediate CA is installed in the correct stores.  I have also verified that COM Security has the domain\TS Web Access group set
    with full perms for the Access and Launch/Activation. Also for WMI  Root\CMIV2\TermicalServcies Security has the domain\Ts Web Access group set with full perms. Lastly each group/user that has access to RDS is listed in the Remote Desktop users.
    I've checked that both WA servers are listed in the TS Web Access group.
    The GW servers RAS/RAP policies are set to be pretty open for testing with using any port, any network resource, and Domain Users and Domain Admins listed.
    I have been trying to connect with Windows 8 and Windows 7 clients as the domain\administrator account.  Some of my session hosts connect fine and other don't .  It's always the same ones that connect and don't connect.  I can't find any difference 
    between the.   I've also blown away my entire RDS and started over with just a 3 server single node model with no NLB or RR DNS and the same exact error happens on certain servers.  I have sense gone back to the 6 server setup described here
    and again the same error on the same session hosts.
    I have also tried Negotiate and RDS Compatible and disabling NLA only for security.  No change.  Now here is the interesting part. If I remove GW servers from RDS by just saying not to use them (not actually uninstalling them or anything), all
    session hosts connect just fine every time.  When I first did my RDS setup I got he same error with code 0x607 for every connection attempt and found i had to set the RAS/RAP to use any network resource instead of Domain Computers.  However, it is
    currently set like that and some still don't connect.   So it works with out the GW servers just fine.  It also works without them in the 6 node setup as well as the 3 node setup. 
    I don't want to use it without the GW servers because since I am using all inside subnets with a VPN I have to add the CB IP/Name to my host file or it will not resolve and give an error about reaching the Connection Broker. Because I want to use a HA setup
    this is no good as there are two servers for it.  That's why I use the NLB IP of the WA and publish it with outside DNS with our ISP. 
    Any ideas at all??
    Thanks,
    Chris

    Hi All,
    I'm the original poster and if you have been following this I was never fully able to get things working.  Sometimes it would just work and other times it would just fail with the 607 error.  I have finally got it all working
    for over a week now with multiple systems using it!  Below is a rather large explanation of what I had to do and what I learned about RDP.   I've included links to guides that helped a lot. 
    First a small recap of my environment.
    Using all windows server 2012.
    Using two Gateways, Connection Brokers, and Web Access servers.
    Two domain names, ucoda.net for external connection via web to web access servers and inucoda.net to inside windows domain that all servers are members of.
    No external client systems are domain members, all just workstations.
    Using two wildcard *.domain certs for both domain names.
    External wildcard cert is from Comodo CA and internal wildcard cert is from my internal CA.
    Now for how I setup the RDS environment.
    I used this guide for setting up high availability of the connection brokers. 
    http://blogs.msdn.com/b/rds/archive/2012/06/27/rd-connection-broker-high-availability-in-windows-server-2012.aspx
    I used a back end SQL Server 2012 that was configured in a two node failover cluster for maximum HA.  As you can see by the guide it uses round robin DNS for load balancing the two CBs and does not require any hardware or software NLB.  
    For both the two gateways and web access servers you need to use some kind of NLB.  You can use the MS NLB to create a virtual Cluster IP and set a DNS record for you gateway and web access name to point to that cluster IP. HOWEVER!  If you are
    in a virtualized vmware environment as I am then you have some other things to do.  I can not comment as to Hyper-V setups, only vmware on ESXi-5.1.  If you use MS NLB then you must use it in Multicast mode and not Unicast. You must also setup static
    ARPs on your Layer 3 router/firewall and Layer 2 switches.  The static ARP should match the NLB cluster IPs to the NLB Cluster MAC address.  Below are the guides for a Cisco Cat switch and ASA firewall.
    http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1006525
    http://www.cisco.com/en/US/docs/security/asa/asa84/asdm64/configuration_guide/mode_fw.html#wp1224694 see adding a static arp section.
    Now in the end I still was not fully happy with MS NLB as it is not Layer 7 aware and can only check the network health.  So I ditched my MS NLB for a linux solution. HAProxy.  It is a software NLB that is Layer 7 aware and easy to setup.
    I used two Ubuntu Server 12 VMs with 1 GB RAM, 8GB HDD, and 1 vCPU each.  I also used Keepalived to setup virtual cluster IPs for HAProxy to use with failover.  so the HAProxy NLB is in high availability mode as well.
    Setup HAProxy on Ubuntu
    http://www.networkinghowtos.com/howto/compile-haproxy-from-source-on-ubuntu/
    Configure HAProxy and Keepalved
    http://leowadsworth.com/blog/2012/02/21/high-availability-load-balanced-web-servers-using-ubuntu-10-04-haproxy-keepalived-apache/ Skip the install part and see just the config parts for HAProxy and Keepalived. 
    Now once NLB is done and you have DNS pointing to it you need to add both Gateways to a Gateway Web Farm.  Not required for the Web Access Servers only the Gateways.  for the Web Access server you only need NLB with a common DNS.  
    Setup Gateway Farm
    http://technet.microsoft.com/en-us/library/cc732370.aspx
    Also as my client systems are not a part of the domain and have different subnets I needed to set the gateway RAP and CAP to allow users to connetc to any network resource.
    Now that the main configuration was done and running I had to fix/fine tune/and mess with a bunch of other things!
    There should be a domain user group account called TS Web Access Computers.  It should be populated with the Web Access server computers.  However in my deployment it was empty! great.  However, I also found other documentation that states
    it should be populated with the Gateway servers.  So for me I added both Gateways, Web Access, and Connection Broker Servers.  I figured it can't hurt.
    Now this group account needs to be added to COM security and WMI security for terminal services.  Below is a guide for both of these. I applied this configuration to every single system including all session hosts. 
    http://technet.microsoft.com/en-us/library/ee891251%28v=ws.10%29.aspx
    Now something interesting. Most of my systems were all server 2012 but a few were 2008R2 that had been upgraded in place to 2012.  For these systems the above config is till needed but you will find on the local systems user groups a TS Web Access Computers
    group.  This is not in the local groups for 2012 but got merged over from 2008 R2.  So for it I also added the domain\TS Web Access Computers group to the local TS Web Access Computers group and added the local one to COM and WMI security as well.
    Further into local user groups. On all systems in the deployment there is a local RDS Management Server group and it should have both Connection Broker servers listed.  I found this to be true on all my session hosts but
    on the Connection Brokers them self they only have their own server listed but not the other connection broker server.  I added both to each.  I also found a few of my systems had a third ? SID account listed that was no longer was a real
    account in the domain.  I removed it. Possibly from how many freaking times I had to re do my setup. 
    Now on the Connection Brokers local group accounts there is a RDS Remote Access Servers group.  It should have all the Gateway and Web Access Server listed here.  In my setup I found only the Web Access Servers were listed and no Gateways.
     GREAT! This only needs to be populated on the Connection Broker Servers. There is also a RDS End Point Servers group and it should have every Session Host server listed.  Again only needed on the Connection Brokers.
    That concludes user accounts/groups.
    Now onto the fun land of Certs!
    Something you need to make sure works is Revocation Checks!!!!!! It needs to pass from both the external client systems and internal server systems.  I had two certs used.  I used my *ucoda.net (external) for my Web Access Server Deployment and
    my *inucoda.net (Internal) for The Gateway and both Connection Broker parts. 
    My external was issued by Comodo so it passed rev checks just fine.  While my internal was issued from my internal CA and needed some work.  For the internal servers it could pass a rev check fine as it used the LDAP path in the CRL CDP
    part of the cert.  However my clients are external and not part of the domain.  So it can't use LDAP.  To check rev checks I used:
    certutil -f –urlfetch -verify <your_certificate>.cer
    You can download it for Windows 7 and 8 systems from:
    http://www.microsoft.com/en-us/download/details.aspx?id=7887 win 7 
    http://www.microsoft.com/en-us/download/details.aspx?id=28972 win 8
    To get it to pass on my client systems I had to add a CRL CDP http point that they could access instead of the LDAP point. In short on you internal CA you need to add a CRL that uses the FILE path to publish rev lists to a file share.  The file share
    is located on a server that has IIS and public access.  You then create a virtual directory with read rights to the that share in IIS and add a CRL HTTP point using the external FQDN of public web server for the CRL site.  Below is a guide
    to do all of this.
    http://blogs.technet.com/b/configmgrteam/archive/2009/05/01/how-to-publish-the-crl-on-a-separate-web-server.aspx
    Now once this is done you need to re generate a new cert and apply it to your RDS environment so it has the updated CRL CDP.
    Now after this I was able to pass using certutil tool.  But! wait there's more!  When I tried to connect to a server using normal RDP (not the full web access and gateway deployment), just direct to the end server I still got the warning about
    a rev check fail! I just didn't get it!  After a ton of researching it appears that RDP will only use LDAP and OCSP CDPs and not HTTP.  Great!  So while it passes the rev check from the tool it still fails for RDP. 
    So next was to add a OCSP CDP and Online Responder.  I chose to add the Online Responder role to my public web server where I had just added the HTTP CRL CDP.  Below are a few guides about setting this up and configuring your CA
    to use it.
    http://www.windowsitpro.com/content1/topic/online-certificate-status-protocol-ocsp-in-windows-server-2008-and-vista--103523/catpath/security
    http://blogs.technet.com/b/askds/archive/2009/06/24/implementing-an-ocsp-responder-part-i-introducing-ocsp.aspx
    http://www.sysads.co.uk/2012/10/install-and-configure-ca-online-responder-ad-cs-part3/
    I fond all helpful.  Now here comes a part that drove me NUTS!.  All these guides show that after installing the Online Responder role it automatically adds a ocsp webapp to IIS!  This is to be the CDP point you add to
    the CA. THIS IS NOT TRUE FOR 2012!  It does not add the IIS config what so ever.  Luckily I manged to find this:
    certutil -vocsproot  
    You need to run that command on the web server where you installed the Online Responder role.  It will add the IIS config and app pool!
    Now once this is all done and tested you need to re issue the cert again so it has the new OCSP CDP in it and install it in RDS deployment.
    Finally after this I received no rev check errors for RDP!
    Some more things on certs.
    For all my servers I installed the internal and external cert to their computer personal store and made sure the corresponding root and intermediate root certs were installed in the correct stores.  I also did this on my external client systems.  Be
    sure to add your internal CA's root cert to the trusted root store of you client systems or again the certs generated from it will not pass fully as the client system will not know to trust the CA that issued the cert.
    Now you also need to install a cert for each session host to use for RDP.  I really recommend wildcards as it much easier to just use a *domain cert for RDS deployment and install it on each session host for RDP than to have unique ones for
    each session host.  You use to be able to easily add a RDP cert in 2008R2 to a session host.  This is now gone in 2012.  So to do it you need to use the power shell.  Below is  guide on how to do this.
    http://blog.skadefro.dk/2012/08/windows-server-2012-server-8-remote.html
    Now I also used a little utility to help check that my certs were installed on each server correctly. I found on a few of my servers where one of my certs was missing the private key or had other problems.  This free tool from DigiCert can help and
    can also be used to test certs for rev checks.
    https://www.digicert.com/util/
    Lastly there is the issue of what RDP version you are using.  For me my systems they are all server 2012.  I found the only way to get SSO to fully work without a 2nd login prompt was to update all my Windows 7 RDP clients to the latest RDP. 
    http://blogs.msdn.com/b/rds/archive/2012/10/23/rdp-8-0-update-for-windows-7-sp1-released-to-web.aspx
    Well after all that I was able to access every RDSH in my environment without a single error!  It has been a ridiculously long and pain full journey.  I think MS needs to do more work and documentation of  2012
    RDS as it's changed so much, needs a better way to issue session host certs for RDP instead of just the power shell, and needs more documentation and clarity on RDP rev checks.   I hope this helps others and if anyone wants to see what my configs
    look like for HAProxy if they decide to use it feel free to ask.
    Thanks and Good Luck!
    Chris

  • I cannot Install Toshiba Power Saver on my Satellite M45-S169 - Code: Ox7E

    I cannot Install/reinstall/remove/run Toshiba power saver on my Satellite M45-S169. after I have reinstalled the system (now it is Windows XP Professional SP2). When I tried to open Power saver via control panel I got accessed denied and every time I reboot the system I get the error message:
    Toshiba Power Save
    A fatal error has occurred. This programme will be terminated.
    Code: Ox7E
    I cannot neither remove nor reinstall power saver. Can I try to run power saver for Windows XP SP2 applicable for other laptop models? I could not find the one for my model. Which one will fit? Any other solutions/advises to the problem?
    Please, help
    Thank you a lot, Oksana

    Hi
    First of all you have to known that this notebook was designed for the US market and all drivers, tools or any other Toshiba utilities should be used from the Toshiba US website.
    http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
    Please ensure that you have already installed Toshiba ACPI Common Modules before you will continue with any further Toshiba software installation.
    One important hint; the Toshiba power saver profile must be chosen in the Windows power options!!! Dont forget this!!!

  • Fatal Error Message (no code)

    I get this message "A fatal error has occurred while updating your device's software. Please try again," everytime I remove an application. 
    The application is removed and I don't have any problems (that I know of) with my BB.
    It just worries me that every single time I do this, I get this message.  Anyone know why?  Do I need to upgrade/update something?
    Thanks in advance.

    It looks to me like it is a problem on your Windows computer not being able to start an application. See the following link to Microsoft Community support (although the specifics of the problem in that case may not be applicable) and also note all of the "Related Content" at the upper right side of that link (and there may be others if you search that forum). http://answers.microsoft.com/en-us/windows/forum/windows_7-system/the-applicatio n-is-unable-to-start-correctly/bbb9c037-77b3-4fae-93b9-ded70f7f9a17
    It may help if you know or can determine which program Windows is trying to open when you upload photos -- there can be many different ones and it can be set by the user. If you are using Windows 7, you may need to check your Autoplay settings. There are some instructions in the following link that may help and that discuss how you can use Windows Explorer to manually transfer the photos: http://support.apple.com/kb/HT4083

Maybe you are looking for