Term store name changes

I have noticed that the name allocated to my term store has changed from Taxonomy_DJcsLjAbAI3lOZhi3Dx51g==
to Taxonomy_Wj7f+lsBu6MEm266iBclFA==
I have an application that uses the name which is now broken. Is there any reason the name was changed and please could someone confirm if this is likely to be changed again.
Thanks
Bren

It never changes. It might because of the conflict of the app but it should not give any error. Can you go to the term store and click on the name Taxonomy_Wj7f+lsBu6MEm266iBclFA== and see on the right the name property of the term store. i.e. Available
service Applications and check if you are able to click on the drop down and select your previous term store name Taxonomy_DJcsLjAbAI3lOZhi3Dx51g== and also it shouldn't create any problems. Just to have a check you can try creating terms and see the behavior.
If you find this information helpful then please propose this as an answer and vote. Thanks.
Ujjwal Patel
|
SharePoint Online Support Engineer, MCPD, MCTS, MCAD.

Similar Messages

Term Store Management: Change Default Label

I have merged two entries together (for the sake of this discussion, lets call them 'cat' and 'feline'). The Default label is currently 'Cat' and 'Feline' has been added to the Other Labels as part of the merge process.
I actually want the default label to be 'Feline' but I cannot change it in the term store manager. I have tried adding 'Cat' into Other Labels (in case Default Label can only show one of the existing labels) but that too fails.
The message I get is 'This operation cannot be completed. The terms store may be unavailable.' But I am able to add other entries to the Other Labels list (e.g. 'Lion') without any problems.
How can I change the Default Label and also add the existing Default Label to the Other Labels list?

OK, went back and tried again today and was able to get it to work first time.
I changed the Default Label from 'Cat' to 'Feline' and changed the Other Label entry 'Feline' to 'Cat' in a
single step and then saved.
I believe I tried this before (in addition to various permutations of attempting this in multiple steps) so either I am mistaken and was doing it wrong before, or the initial merging of terms takes time to fully implement (during which some changes are restricted),
or SP2010 is just a bit flakey. Having spend a few weeks on SP2010 now my money is on the latter option...

How can I change the order of menu items using Term Store Navigation?

A cool new feature in SharePoint 2013 is term store navigation. However SharePoint seems to be ordering my terms (menu tabs) alphabetically. This is not a desired action.
I tried to enter the terms in the order I wanted them to appear (IE - Home, About, Contact etc. ) but my menus are still sorted by alpha (About, Contact, Home). I have tried to change the order using the interface but it doesn't seem to work.
Any suggestions on how to obtain the desired effect? If there is no workaround this feature is practically useless.
The Web Guy

Never mind, I just found the custom sort tab hidden away!
The Web Guy

Ok so heres my question. I don't understand why this sign that say "Terms n Policy of the store have changed!" and it said to go agree the new terms and policy. I did that and it went back to the app store,but then it pops out again! What do i do?!

Ok I don't understand why this sign that says "Terms and Policy of App store has changed!" So it tells me to go agree the new terms and policy. After i did that it returns to the App Store where i was before. And only like ten to five seconds it appears again! I just dont know what to do! Can anyone help me?!

Sign out of iTunes and sign back in and try again. The issue is being reported as being solved....
GB

Claims debacle (error) with Term Store: "Could not retrieve a valid windows identity" for all sites in a particular web app.

When I pull up the Term store in CA or any MySite collection, it works.
When I do so in any other site collection (HNSCs, incidentally), It doesn't return any term stores.
My ULS log immediately before and after the "/_vti_bin/taxonomyinternalservice.json/CheckPermission" POST on termstore .aspx triggers the WCF call:
Claims Authentication af30y Verbose Claims Windows Sign-In: Successfully signed-in the the user 'contoso\domainUser' for request url 'https://sp13-root-prd.contoso.com/_vti_bin/taxonomyinternalservice.json/CheckPermission'.
Claims Authentication af30q Verbose Updating header 'LOGON_USER' with value '0#.w|contoso\domainUser' for the request url 'https://sp13-root-prd.contoso.com/_vti_bin/taxonomyinternalservice.json/CheckPermission'.
Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|contoso\domainUser, ClaimsCount=77
Logging Correlation Data xmnv Medium Site=/
Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://CONTOSOFE3:32843/00e6d55691824965ac223f1d1cfae6d2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges2' MessageId: 'urn:uuid:590e916c-c89a-4f89-9819-a82c97fabcaa'
Claims Authentication bz7l Medium SPSecurityContext: Could not retrieve a valid windows identity for username 'contoso\domainUser' with UPN '[email protected]'. UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: WTS0003: The caller is not authorized to access the service. (Fault Detail is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.UnauthorizedAccessException: WTS0003: The caller is not authorized to access the service. at Microsoft.IdentityModel.WindowsTokenService.CallerSecurity.CheckCaller(WindowsIdentity callerIdentity) at Microsoft.IdentityModel.WindowsTokenService.S4UServiceContract.PerformLogon(Func`1 logonOperation, Int32 pid) at SyncInvokeUpnLogon(Object , Object[] , Object[] ) at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc) at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet))..
Claims Authentication g220 Unexpected No windows identity for contoso\domainUser.
The "The caller is not authorized to access the service." message seems pertinent.
Both web apps are using only NTLM auth.
The url for both web apps ends in the same contoso.com domain.
I get the same errors no matter what account I use, including the install account.
Things I've tried:
Deleting and building a new HNSC root web app and site. Error happens in all sites in all web apps except the PBSC hosting MySites.
Giving the root site app pool identity full control of the metadata service app (even though the MySite identitiy doesn't have it)
Giving the root site app pool identity full permissions on the metadata service app.
Comparing database and web app config permissions between dev (where everything works perfectly) and prod (where it does not).
Made sure IIS auth settings on both sites are identical
Both sites are using the same SSL certificate (though the call to the web service appears to be http)
Reprovisioned the metadata service app with a new database and new app pool identity.
Made sure C2WT is running. Tried it with the service stopped as well.
Web.configs are identical between working and non-working apps.
I'm stumped but still Googling. I'm hoping to avoid having to call Micrososft. Any help would be appreciated!
UPDATE:
Interestingly, when I restored the web application from backup (via CA), I ended up with 3 identical "Windows Authentication" authentication providers assigned to the problem web app. Since there was more than one, I was directed to the provider-chooser
page when visiting the site. Upon choosing 1 of the 3, I was authenticated, and *poof*, no more authentication errors and the term store loaded term sets as expected.
Of course, 3 providers was not an ideal state, so I grabbed the one that worked (#1) via get-spauthenticationprovider, and assigned it to the web app via set-spwebapplication, and my problem returned.
I am currently updating the farm to SP1 from June 2013 CU. Fingers crossed.
Update:
The update to SP1 went smoothly, but did not resolve the issue. Also related (I believe) are the random authentication errors when trying to upload images to some libraries, and 401-errors on the accessdenied.aspx page itself.
Update:
The problem is resolved, seemingly after making 4 changes. I'm trying to narrow down which change was the cure, if any:
I installed SP1 on all 6 servers, rebooted and upgraded. This appeared to have no effect.
Removed an old login from SQL that no longer existed in AD because of this ULS error:
System.Runtime.InteropServices.COMException: The user or group contoso\svc_xxxxxxxxx' is unknown., StackTrace: at Microsoft.SharePoint.Utilities.SPUtility.GetFullNameFromLoginEx(String loginName, Boolean&
bIsDL)
This login was the identity of the application pool that used to run the web app in question.
This login was the schema owner of a schema named after itself on every SharePoint database so I changed the schema owner to dbo but left the schema attached.
The problem may have surfaced initially when the app pool identity was changed in CA, but went unnoticed?
Note that the web app had been deleted and recreated many times with a new identity and pool to no avail, but the URL remained the same throughout each attempted fix. Relevant?
Grasping at straws, I changed the app pool identity for this web app to the same one that runs the MySite web app pool as per this only slightly related problem: http://www.planetsharepoint.org/m/preview.php?id=372&rid=34764&author=Vlad+Catrinescu
I changed the authentication method from NTLM to Negotiate.
I am rolling back #3 and #4 to see if the issue resurfaces.
Update:
It doesn't appear to have been the NTLM/Negotiate setting. Web app is currently set to NTLM and all is well. No strange accessdenies, and term Store is still manageable from all sites.
Update: Sorry for the delay. I am administering 6 farms these days. Will update as soon as the final phase of rollbacks happens.
I think I can. I think I can.

maybe that web app was accidentally created with classic auth?
here's an example of how to create claims based, with classic, and then "doing 2013" claims
#Create the example web application, as mentioned above, either with gui, and pick later, or
New-SPWebApplication-ApplicationPool$applicationPool-ApplicationPoolAccount$serviceAcct-Name$WebApp-Port
5050
-databaseName$contentDB-securesocketslayer
#If doing for 2013
New-SPWebApplication-ApplicationPool$applicationPool-ApplicationPoolAccount$serviceAcct-Name$WebApp-Port
5050
-AuthenticationProvider(new-spauthenticationprovider)
-databaseName$contentDB-secureSocketsLayer

OIM and MS Exchange - Invalid mail store name error

hello,
I'm trying to provision a user with a mailbox in Exchange. I have setup SSL between the AD/Exch box and OIM. After a manual provisioning is initiated through OIM, the "Create Mailbox" adapter status is shown as "Rejected".
In the details, the Reason show is "Invalid mail store name passed". However, the mail store name used in the IT Resource Configuration is as per the connector documentation and as seen in the Exchange System Manager console i.e. "Mailbox Store (BASE)" where "BASE" is the name of the computer where AD/Exch is installed.
Am I missing something? Is there a full DN of the mail store required? Is this something to do with the access permissions in AD or Exchange?
Please advise. Thank you!

Hi,
I was able to resolve this by changing the value of "Server Name" value in the IT Resource. The issue is not with the Mail Store Name or "Store Name" rather it's with the "Server Name".
The value of "Server Name" should be the host name without the domain name for example, BASE only instead of BASE.mydomain.com.
The value of "Store Name" should be as shown in the Windows Exchange Admin Console. E.g. "Mailbox Store (BASE)".
Also, ensure that the value "AD User" is added under the "Depends On" for the "Exchange" Resource Object.
Once you provide the values as mentioned above, create a user in OIM and assign AD User and Exchange resources.
The mailbox will not be created/shown in the Exchange Admin Console unless you access the Exchange URL and login with the target user's credentials.
The Exchange URL can be accessed as "http://hostname or IP/exchange". Provide the user's username and password and the Outlook Web Access screen will be displayed.
Now go to Exchange Admin System console and check the mail store if the maiilbox is created.
Hope this helps. Thanks!!

If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content?

If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content? I want to buy an album that I cannot get hold of in Korea, but it is available in the US iTunes store. However since most of my apps are downloaded from the Korean store I'll need to switch back in order to update them. Does anyone know if there are any issues in doing this. I'd rather find out before I spend money, change my store setting back to Korea, and then get told I can't listen to the music because I bought it from the US store and my iTunes is set to the Korean store.
Cheers.

You canot easily change your country settings. The iTunes Store in a country is intended only for use by that country's residents, and only while they are in the country. To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store. You are also restricted to waiting 90 days between country changes.
E.g., "The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance." - http://www.apple.com/legal/itunes/us/terms.html#SERVICE

Create an Object(Store) based on Store Id,it should display Store Name

Hi,
My Question is, Create an Object(Store) based on Store Id,it should display Store name at report level.
I did the list of values Name changed from Store Id to Store Name in Object Properties in Universe level. These values are changed in the universe level, but not displaying in Report level. How it is possible? can any one give the reply.
Thanks & Regards
Madhu...

What i understand is you wan the user to be prompted with STORE_ID values and when they select a store_id or multiple store _id then you want to display the store names for these store _id selected in the report . If this is correct then follow below
In Universe create a object whose definition is store_name and not store id. In the LOV of this object click edit and then in the LOV add STOREID, STORE_NAME COLUMN with STORE_ID so now the user will see the store-id and the store name for that store_id but when you select any values it will show only the store name.

HT204266 My App Store has changed to the us store how do I get back to the uk store?

As question my App Store has changed to the us site and I don't know how to get back to the uk one

Change iTunes Store Country on an iDevice
1. Tap Settings;
2. Tap iTunes & App Stores;
3. Tap View Apple ID;
4. Enter your user name and password;
5. Tap Country/Region;
6. Tap Change Country/Region;
7. Select the region where you will be located;
8. Tap Done.
Also, see How to Change Your iTunes Store Account Location | eHow.com.

Vendor name Changes

What is the SAP standard process for a vendor that changes it's name? Do you create a new vendor? If you create a new vendor, how do you link the old vendor data?

I am familiar with XK02.
The problem we encounter was an auditor was making selections from an SAP report and selected a 2007 invoice from vendor ####### which displayed the name: "Siemens Healthcare Diagnostics". When the responsible A/P person looked in their Siemens file, they could not find the invoice. Someone remembered that this vendor was actually named Dade Behring Inc in 2007. (1) When is a "name change" really a new vendor account and (2) If a name change is not a new account, is there a field in the vendor master record where we could store the "old name" so that it would be visible to A/P but not appear in places where it should not.

Term Store missing complete list of terms

In my Term Store Management Tool, when I expand a Term Set, it is not listing all terms. It used to list the complete list of terms, but just recently it doesn't . The down arrow is missing where you would click to see the rest of
the terms. It only lists the first 10 terms.
Anyone know how to fix this to be able to see the complete list of terms?
I know they are still there, as I can see all the terms when I upload a document (metadata choices).
thanks!

Hi,
According to your post, my understanding is that you can’t see the down arrow to view the rest terms which are more than 10.
In my environment, I also do this test and the result is that it works well.
Per my knowledge, it’s by design that the terms only can show the top 10 terms under a term set, then you can click on the drop arrow to view rest terms which are more than 10.
You can try to create a new Term Set or a Group, and separately do this test again to check if this issue only occurs on this term set.
What is your current browser? I recommend that you can change some different browsers to check if this issue only occurs on your current browser.
If you are using the IE browser, you can change the IE browser mode using F12, change to different mode, then check whether it works.
You can try to clear the browser cache and run the IE in safe-mode again to test if it works.
Also, I suggest that it’s better to use the IE 8 browser for SharePoint 2010.
And, does this issue occurs after you install any update in your environment?
I recommend that you can try to install the latest update in your environment to check if it works.
Best Regards,
Yumi Fu

Term Store searching Tool

Hi Everyone,
I'm currently building a tool that will allow people to do basic "maintenance" with their term stores. This idea came about when I was tasked with writing a PowerShell script to show us all term that did not adhere to company policy.
I thought to myself this would be a nice project to start. So 2 days later I have a "beta" that's working on the server. I am planning to release this thing on codeplex but I need some input.
Right now I have basic searching done as well as searching with Regex. This tool also allows you to switch between the term sets (if you have more than one) and export them (your results) to a simple CSV file where you can do whatever you need to do after.
I am also working on a rename feature so you can actively rename the term via the application.
So this discussion is really to look for some ideas to make it that more worth while.
Any ideas?
Here is an example image of the application:
If this is helpful please mark it so. Also if this solved your problem mark as answer.

Good initiative! Can we have tree view look with expandable (+) 'plus' sign. Just thinking, that might help.
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.
The results only get tags that don't have anything under them.
The best solution for this would have to change the design slightly to allow the user to click on the term and have another box showing the owner, created date and any parent tag it might have.
Thanks for the idea.
If this is helpful please mark it so. Also if this solved your problem mark as answer.

AD Security Group name change not showing in Sharepoint 2010

Hi!
We have a Sharepoint 2010 Standard enviroment and are heading for a role-based identity-managment in our company. That's why we find it better to use AD Groups instead of Sharepoint Groups.
So we have over 1000 AD Security Groups groups that have been added to our Sharepoint Sites and our goal is to control every permission in Sharepoint from AD.
I have done all this with the combination of Excel and Powershell and it have worked great.
The problem i see in the long run is the name change of AD Security Groups. Sharepoint 2010 isn't showing the new name of the group.
Does anyone know of any workaround that can solve this problem. It's a bit of a disappointment that Microsoft haven't fixed this. The only information i think they should store in Sharepoint is the SID of the groups.
I was thinking of designing a powershell script that runs every night and updates the display name of the groups that do not match the AD display name.
Is there any other way?

As far as I know, and I'm not sure where to go from here without testing on my own...and I'm not sure when I'll be able to do that. Perhaps a configuration issue.
Have you tried removing the incorrectly named group and adding in the correctly named one?
Read through this related post:
http://social.msdn.microsoft.com/Forums/en-US/sharepoint2010general/thread/49dc833f-4127-45ac-bd21-98b04d3632ef
Looks like that can help you. Let us know how things go.
Colorless Green Ideas Sleep Furiously http://www.sharepointnerd.com

Mail Store Name Updated

Hi,
I need to move a user from one mailbox store to another in Exchange 2007 using OIM. From what I could gather, there is no task for this. Is there a way to create a task that executes this modification (move user)?
Thanks

Hi,
I created a task "Mail Store Name Updated" to change the mailbox store integrated with the adapter adpMEXCUPDATEUSERPROPERTY to change the attribute homeMDB, but generates this error.
ERROR,12 Jan 2010 07:19:33,696,[OIMCP.MEXC],================= Start Stack Trace =======================
ERROR,12 Jan 2010 07:19:33,696,[OIMCP.MEXC],com.thortech.xl.integration.Exchange.tcExchangeTasks : setUserAttributes
ERROR,12 Jan 2010 07:19:33,696,[OIMCP.MEXC],Attributes cannot update:[LDAP: error code 19 - 000020B5: AtrErr: DSID-03152A9F, #1:
        0: 000020B5: DSID-03152A9F, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 92da830f (homeMDB)]
ERROR,12 Jan 2010 07:19:33,696,[OIMCP.MEXC],Description : Attributes cannot update:[LDAP: error code 19 - 000020B5: AtrErr: DSID-03152A9F, #1:
        0: 000020B5: DSID-03152A9F, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 92da830f (homeMDB)]
ERROR,12 Jan 2010 07:19:33,696,[OIMCP.MEXC],com.thortech.xl.exception.InvalidDataException: Attributes cannot update:[LDAP: error code 19 - 000020B5: AtrErr: DSID-03152A9F, #1:
        0: 000020B5: DSID-03152A9F, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 92da830f (homeMDB)]
at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.modifyAttributes(Unknown Source)
at com.thortech.xl.integration.Exchange.tcExchangeTasks.setUserAttributes(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpMEXCUPDATEUSERPROPERTY.SETUSERPROPERTIES(adpMEXCUPDATEUSERPROPERTY.java:116)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpMEXCUPDATEUSERPROPERTY.implementation(adpMEXCUPDATEUSERPROPERTY.java:58)
          continue ...
Regards,
Elso

How to map our organization's departments and documents under a Metadata term store

I am working on a Wiki library for our company under SharePoint 2013. The idea of the wiki is to organize our work per department, then per project. For example for our financial dept we will have the following hierarchy:-
1. Annual bank settlement
1.1 Bank A
1.1.1 2013
1.1.2 2012
1.2 BankB
2. Salaries
and for our Software engineering dept, they will have the following hierarchy :-
1. ProjectA
1.1 Requirement
1.2 Design
2. ProjectB
2.1 Requirement
2.2 Design
3. ProjectC
Now the problem with organizing our information in this way , will create conflicts. For example under each project inside the SW engineering dept. there is a “Design” term, so when the user click on the Design term link , inside the
Category column for a wiki article as follow:-
link
it will take him to different Wiki articles depending on the project, while the logic would say that clicking on the “Design” should show all the wikis that are tagged as Design regardless of the project there are under it? so how I can organize my term
store to be more useful and remove any conflicts ? Thanks

Hi,
According to your description, my understanding is that you want to update the changed terms used in the documents or sites.
I recommend to run the Taxonomy Update Scheduler timer job now to update the terms.
Click Run Now button in the Taxonomy Update Scheduler timer job associated with the corresponding web application in Central Administration, then the terms will be updated.
Thanks
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Term store name changes

Similar Messages

Maybe you are looking for