Terminal session not supported by your computer
I can login to my work environment but when I try and initiate a remote session link to my work computer, I get an error message that says "This terminal session is not supported by your computer."
I need to be able to log in and remotely access my PC at work. Any suggestions are appreciated.....
what OS on your work computer? What is already installed on it to allow remote control? Is that software enabled?
If remote os is MacOs - Apple Remote Desktop is actually server component, I mean it is not included in desktop MacOs of your home mac. But search can help.
If remote os is Win - you need this: http://www.microsoft.com/mac/remote-desktop-client on home mac
and in both cases - proper configuration.
anyway you need properly configured tunneling thru workplace firewall, so some assistance from admin.
Similar Messages
-
Terminal Session Not Supported
Hi ,
I have bought a new macbook pro and use Juniper VPN to connect to my work machine (Windows). Below are the steps I perform to connect to my terminal session
1) Login to the VPN url. for example - https://secure.mycompany.com/
2) Enter the UserID and Password
3) Connect to the Terminal sessions configured.
Now, When I try to launch the terminal session, I recieve an error message saying "This terminal session is not supported on your computer".
Any help on resolving this issue is highly appreciated.
Thanks,
TrishHey,
I am in the same boat.
Did you manage to find any solution? My Work IT team has got no clue about this.
Regards,
Akash -
MACBOOK Pro 13-inch Mid 2012
2.9GHz Intel Core i7
8GB 1600 MHz DDR3
Intel HD Graphics 40000 512 MB
Mac OS X Lion 10..5 (11G63)
Model Identifier: MacBookPro9,2
Boot ROM Version: MBP91.00D3.B08
SMC Version (system): 2.2f44
Passed Last Power on Self-Test
The MacBook EFI Updater File that I downloaded from the Apple website for Support:
http://support.apple.com/kb/HT1237
--> shows my Model McBookPro 9,2 as needing
EFI Boot ROM version MBP91.00D3.B08 (EFI 2.9) (http://support.apple.com/kb/DL1593)
SMC version 2.2f44 (SMC 1.8) (http://support.apple.com/kb/DL1633)
I downloaded and tried to run both the files
MacBookProEFIUpdate2.9.dmg 9/19/12
AND
MacBookProSMCUpdate.pkg
as offered on this matrix, which instructs:
"This article lists firmware updates that were released for Intel-based Macs. They update the firmware that originally shipped from the factory. If your computer does not appear on this list, an update from the factory firmware is not necessary.
If you are unsure whether your computer needs a particular update, simply download and open the update installer. The installer will alert you if the firmware update is already installed or not needed."
and instead of a message telling me of the proper update
"This software is not supported on your system."
So, why would the manual updater not tell me I already have the proper SMC and EFI updates?
What is the reason I get the message that the software I downloaded from Apple Support is not supported on my system?
Is this indicative of a larger problem with my MACBOOK PRO?[email protected],
why were you trying to reïnstall the Boot ROM and SMC versions that were already installed on your MacBook Pro?
I agree that a “not supported” message is certainly less clear than an “already installed” message would have been. -
Raid Utility Error Message "raid utility is not supported on this computer"
I am not doing anything that I know of, but Raid Utility keeps opening up on its own, and a message pops up multiple times a day telling me "raid utility is not supported on this computer"
Anyone have any idea how to fix this?Network startup is if you want to start your macbook using a network drive.
Keep your startup settings at your current drive.
Raid utility doesn't apply to you since you only have one hard drive installed, unless you installed another hard drive in your optical bay.
Fibre Channel is another type of hard drive connection via network connection.
You can't access things you don't have installed in your macbook. Those are there in case you decide to have a network drive start up options, a raid configuration of a fibre channel network drive. -
Hi all
I've been running Windows Server 2012 R2 with the Essentials Experience in test for a Windows 8.1 client environment, on an HP ProLiant MicroServer N54L. Overall I've found the Essential Experience set-up over WHS2011 and WHSv1 okay; still looking to extract
any real value over the former versions.
This box has been up and running for a few months now, with client backups of a Win 8.1 box scheduled and running successfully every day. However when trying to conduct any file restores from the backups, to the client, I receive an error dialog once I go
through motions from the Dashboard:
On the 'Devices' tab, right-click the appropriate client and select 'Restore files or folders for the computer'
'Restore Files of Folders' dialog pops up, asking me to 'Choose a backup' from the list of all the backups that have run
Select any one in the list - have tried numerous backups; automatic, manual, etc. same result every time
Brings up the dialog to 'Choose a volume', choose either C: or D: partitions of the same fixed drive - again, no difference which one I choose, the outcome is the same
'Opening the volume' dialog starts, with progress bar, runs to about 4% complete the pops up the dialog 'The restore process did not succeed'. Full error in the dialog, "The restore process did not succeed because your computer cannot connect to the
server. Make sure that the computer is connected to the networkm and then try again
If my computer cannot connect to the server - how can I get that far? How can I open the dashboard, select a client, select from a list of backups, select a volume to restore, etc. What is going on here?Hi,
Please check if a "host" entry for the server is added to the client. For more detailed information, please refer to the threads below:
Unable to Restore files or folders from a Client Backup
http://social.technet.microsoft.com/Forums/en-US/d1d001bd-20c5-4f09-861d-526c31567963/unable-to-restore-files-or-folders-from-a-client-backup
Can't restore anything
http://social.technet.microsoft.com/Forums/windowsserver/en-US/98e269b5-2bd1-449e-a213-e386ae15266f/cant-restore-anything?forum=winserveressentials
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I've been having issues with an external Esata drive. Instead of being seen as a removeable drive, it is seen as a hard drive. This has caused us nothing but problems since our full disk encryption software automatically starts to encrypt
the drive rendering it useless.
The real problem I'm having is installing the Hot Fix, KB979344, for this issue. when tring to install, I get the message, "this update is not applicable to your computer" I've looked and this hot fix doesn't seem to be part of SP1, but
I could be missing it. Any thoughts?
Thanks,
KeithHi Keithk,
This hotfix is already contained in Windows 7 Service Pack 1.
Please add the registry key to check if the issue persists. (For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. )
Navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Storage
Create a DWORD Value, name SATAHotplugPolicyOverride,
set 1 in Value Data.
Restart the computer to check if it works.
Regards,
Miya
TechNet Subscriber Support in forum. If you have any feedback on our support, please contact
[email protected]
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread. -
Help me
"This software is not supported on YOUR SYSTEM" seems to be a recurring theme in Apple Support site offerings for MacBook Pros and I suspect that Apple didn't really work this issue thoroughly enough to make their hardware updates viable.
You are not alone, Raigbow. Many MacBook Pro users are finding the Apple Support update packages are not doing what their support instructions indicate should be happening.
I believe this is a bigger issue of Apple not thinking of previously sold units as worthy of solid support. After the one year warranty, unless you buy more warranty - and I have - the half-hearted but very thorough documentation of non-working "fixes" shows they aren't all that concerned with your happiness as a user.... Only as a potential buyer of the next Apple showcase item.
After that, they will be on to the next big thing. Kind of like the Japanese model, in which old things are discarded.
But save your work, your data, as the only fix the manufacturer will offer is to wipe your drive and reinstall the original software.
Or use the iCloud to save everything you do and value, since the device you use to access it is short-term.. Don't get too attached to your MAC, because it is terminal in nature. -
Dear everyone,
We are trying to install the below KB in our windows server 2008 R2 SP1, however, it will show "The update is not applicable to your computer". There is no problems to install the other patches except this one. Do anyone have idea about it?
http://support.microsoft.com/kb/2677070
Thanks,
UsersHi,
According to this KB article, there are many exceptions where this KB is not applicable.
Please perform the following steps:
Expand the “For all supported…” title in the File Information section in the KB article.
Find Crypt32.dll.mui files on your machine.
Then compare the file version, file size, data and time with the ones listed in the KB article.
If there is a match, then this KB doesn’t apply to your machine, which is by design.
Hope this helps.
Best Regards,
Amy Wang -
RSAT Tools won't install (the update is not applicable to your computer) in build 9926
Trying to install Remote Server Administration Tools in Windows 10 Technical Preview build 9926
Downloaded WindowsTH-KB2693643-x64.msu
Gives error "the update is not applicable to your computer"Hi SeanSauve,
The below is the information I quoted from the system requirements part on the download page:
Supported Operating System
Windows 10 , Windows 10 Tech Preview , Windows 8.1
**Remote Server Administration Tools for Windows 10 Technical Preview can be installed ONLY on computers that are running the second release of Windows 10 Technical Preview.** Remote Server Administration Tools cannot be installed on Windows
RT, computers with an Advanced RISC Machine (ARM) architecture, or other system-on-chip devices.
Remote Server Administration Tools for Windows 10 Technical Preview runs on both x86- and x64-based editions of builds 9926 and later releases of Windows 10 Technical Preview, including all updates. This release does not run on Windows 10 Technical
Preview builds that are older than 9926. Download and install the version that matches the architecture of the computer on which you plan to install the administration tools. If you are not sure whether your computer is x86- or x64-based, see
How to determine whether a computer is running a 32-bit version or 64-bit version of the Windows operating system.
Remote Server Administration Tools for Windows 10 Technical Preview is available only in United States English (en-US) for this release.
IMPORTANT: Remove all older versions of Administration Tools Pack or Remote Server Administration Tools—including older prerelease versions, and releases of the tools for different languages or locales—from the computer before you install Remote
Server Administration Tools for Windows 10 Technical Preview. Only one copy at a time of Remote Server Administration Tools can be installed on a computer. If you have upgraded to Windows 10 Technical Preview from an older release of Windows, you will need
to install Remote Server Administration Tools for Windows 10 Technical Preview on the computer; no earlier releases of Remote Server Administration Tools are still installed on a computer that you have upgraded to Windows 10 Technical Preview.
Remote Server Administration Tools for Windows 10 Technical Preview includes support for remote management of computers that are running the Server Core installation option or the Minimal Server Graphical Interface configuration of Windows Server Technical
Preview. However, Remote Server Administration Tools for Windows 10 Technical Preview cannot be installed on any releases or installation options of the Windows Server operating system.
Earlier releases of Remote Server Administration Tools (such as those for Windows 8.1) are not available--nor do they run--on Windows 10 Technical Preview.
Server Manager is included with Remote Server Administration Tools for Windows 10 Technical Preview; GUI-based tools that are part of this release of Remote Server Administration Tools can be opened by using commands on the Tools menu of the Server Manager
console. To use Server Manager to access and manage remote servers that are running Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, or Windows Server 2012 R2, you must install several updates on the older operating systems. For more information
about requirements for using Server Manager to manage remote servers, see
Manage multiple, remote servers with Server Manager.
More information, see:
Remote Server Administration Tools for Windows 10 Technical Preview (January 2015)
Please check and see if your current build is Windows 10 build 9926, and the system language, RSAT should not be able to install on the other language versions of Windows 10 other than EN-US.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]. -
The update is not applicable to your computer, patch kb2893984
Dear Expert,
My customer has a problem when update patch kb2893984, it shows error " .”the update is not applicable to your computer”
in Windows 7 32 bits. customer already try in http://forums.techguy.org/windows-7/1116922-failure-configuring-windows-updates.html
but it does not work.
Please suggestion,Hi,
This error will occur if:
The system type is not matching with this update's type.
The base language of your OS (the language chosen during setup) is outside of the support. Please note that any other language or non-specified version (such as Portugese(Portugal)) are not included among the supported languages.
Please download it from here:
Security Update for Windows 7 (KB2893984)
http://www.microsoft.com/en-us/download/details.aspx?id=41275
Note: select the correct language and make sure your operating system is Windows 7 Service Pack 1 32bit.
Karen Hu
TechNet Community Support -
Itunes not supported in your country
I have a UK Itunes account where I reside but am currently working in Qatar. When I try to connect to ITunes via WI-FI on my 2G Iphone I get the following message "ITunes not supported in your country". Works OK on my Macbook. Ive seen this question posted before but there doesnt seem to be a fix. Have resync with Itunes account, changed countries etc but no fix. Is this something with the 2.2 software update maybe. I brought the Iphone to save lugging the laptop around so am disappointed with Apple if this is a permanent lock out.
Yes U.S. only.
You friends are using it illegally.
About iTunes Radio
iTunes Radio is available for free on all devices and computers with iOS 7 or OS X Lion v10.7 or later, iTunes 11.1, or Apple TV 6.0 or later installed. iTunes Radio streams radio stations directly to your device or computer. You'll have access to more than 250 DJ-curated and genre-focused stations. iTunes Radio is U.S. only. -
Stuck in an update loop, 3 of 3, do not turn off your computer
Hello,
We have all the updates ,update automatically. During this last one, today, our server has shut down and is in a constant loop. We are getting that the drives are both fine, but there is one error on the start up that has me concerned:
BMC System Error {SEL} Full
The system goes through "Configuring updates" Stage 3 0f 3, do not shut down, then on to a blank screen, then restarts on its own, goes through the whole start up, everything looks good except for that BMC error, than the microsoft is loading...and
right back into "Configuring updates", blank screen - its been on a continuous loop for about a half hour now.
Suggestions? The computer does not stay on long enough to do anything, and it never actually gets to a start menu..
Thanks,
Kelly CampbellHi,
Before going further, would you please let me know the version of operation system that you use?
Meanwhile, please refer to resolution steps in the following KB. Then check if can troubleshoot and solve your issue.
"Failure configuring Windows updates. Reverting changes. Do not turn off your computer" error when you try to install Windows updates
http://support.microsoft.com/kb/949358/en-us
Regarding to the error message, should the complete information of this error be “02A2: BMC System Error Log (SEL) Full.”? If so, please refer to the following article
and check if can solve this error.
02A2: BMC System Error Log (SEL) Full.
http://clintboessen.blogspot.in/2013/05/02a2-bmc-system-error-log-sel-full.html
If I misunderstand, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu -
hi
I want update firmware .details my system is
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro9,2
Processor Name: Intel Core i5
Processor Speed: 2.5 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 4 GB
Boot ROM Version: MBP91.00D3.B08
SMC Version (system): 2.2f38
Serial Number (system): C1MHQC17DTY3
Hardware UUID: EF0C6F81-20AD-50FA-9DD5-C8E084DF8E8C
Sudden Motion Sensor:
State: Enabled
but when install the last update MacBookProEFIUpdate2.9 i got error like this
"This software is not supported on your system."
please help me thanksOK, so the firmware is the same as mine, and yet Apple Support offered this EFI and SMC update packages, which should give a message that our computers are updated.
However, the update packages fail to run.
Did Apple neglect to give the correct update for the mid-2012 issue of MacBook Pro 13-inch? I have the i7 Intel processor, instead of the i5, and I was sold this unit as having two processors, but the System info only lists a single processor.
Is one of the problems with Intel-based MacBook Pro units that the integration wasn't without bugs that cause processor hang when running the OS Lion, even with updates to 10.7.5?
Shouldn't the EFI and SMC updaters run on these machines as stated in the Apple Support article?
What will Apple do for these customers? -
Windows Server 2008 R2: "The update is not applicable to your computer"
ALCON,
I'm trying to install a "Windows Update Standalone Installer" file (Windows6.1-KB3032323-x64.msu) along with other .msu files and I keep getting the same message: "The update is not applicable to your computer". The server is a
virtual machine and is also the vCenter server for the system, so I REALLY don't want to mess this installation up and break the system but the installation is needed and mandatory. How can I go about installing these .msu files.
*Note* The system is located in a classified environment so it doesn't have a connection to the outside (unclassified) world. But I'm able to have the .msu files placed on the system at any time.
Thanks!
V/r,
Stanley L. Johnson Jr.Hello,
do you use SP1 for Windows Server 2008 R2?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
When I try to install security patch KB2525694 and KB978542 on my Windows Server 2008 R2 machine, I get the message "The Update is Not Applicable To Your Computer". I am using the following files:
Windows6.1-KB978542-x64 (KB978542)
Windows6.1-KB2525694-x64 (KB2525694)
I believe these are the correct files but no luck installing it. Any help would be greatly appreciated!When I try to install security patch KB2525694 on my Windows Server 2008 R2 machine, I get the message "The Update is Not Applicable To Your Computer". I am using the following files:
Windows6.1-KB2525694-x64 (KB2525694)
This update has been superseded many times.
If you already have installed one of the superseding updates below, KB2525694 will not be applicable.
For the list of superseding updates, check this list:
http://catalog.update.microsoft.com/v7/site/Search.aspx?q=2525694%20r2%20x64
(click on the result, then click on the "Package Details" tab to get the list below..
This update has been replaced by the following updates:
Security Update for Windows Server 2008 R2 x64 Edition (KB2555917)
Security Update for Windows Server 2008 R2 x64 Edition (KB2567053)
Security Update for Windows Server 2008 R2 x64 Edition (KB2639417)
Security Update for Windows Server 2008 R2 x64 Edition (KB2641653)
Security Update for Windows Server 2008 R2 x64 Edition (KB2660465)
Security Update for Windows Server 2008 R2 x64 Edition (KB2676562)
Security Update for Windows Server 2008 R2 x64 Edition (KB2709162)
Security Update for Windows Server 2008 R2 x64 Edition (KB2718523)
Security Update for Windows Server 2008 R2 x64 Edition (KB2731847)
Security Update for Windows Server 2008 R2 x64 Edition (KB2761226)
Security Update for Windows Server 2008 R2 x64 Edition (KB2778344)
Security Update for Windows Server 2008 R2 x64 Edition (KB2778930)
Security Update for Windows Server 2008 R2 x64 Edition (KB2779030)
Security Update for Windows Server 2008 R2 x64 Edition (KB2808735)
Security Update for Windows Server 2008 R2 x64 Edition (KB2829361)
Security Update for Windows Server 2008 R2 x64 Edition (KB2850851)
Security Update for Windows Server 2008 R2 x64 Edition (KB2876315)
Security Update for Windows Server 2008 R2 x64 Edition (KB2883150)
Security Update for Windows Server 2008 R2 x64 Edition (KB2893984)
Security Update for Windows Server 2008 R2 x64 Edition (KB2913602)
Security Update for Windows Server 2008 R2 x64 Edition (KB2930275)
Security Update for Windows Server 2008 R2 x64 Edition (KB2973201)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
Maybe you are looking for
-
HP Photosmart Premium e-All-in-O​ne (CN503B) - ePrint - invalid code
I'm having difficulties adding the printer to my account,. I've tried the "disable, enable" web service trick, but still no luck... any suggestions?
-
Problem with automatic outbound IDoc creation
Hi all!!! I want to configure an IDoc to be created when an Installation (IBASE) is saved. To do this, I use the IDoc type CRMXIF_IBASE_SAVE01, assign a message type, link with the FM APPL_IDOC_INPUTM to create the IDoc, create a partner profile, cre
-
How do I find and download a tune by its title?
I want to make a list of my music. How do I find and download tunes by their title?
-
Hi all, in a program I want to create a QM-Notification. Difficulty: I did an append to table QMEL and want to write data to these fields when creating the notification. I did not find a BAPI which has QMEL or VIQMEL as importing parameter. Can anyon
-
Can't find "place" option in the dropdown menu to add an image
I can't upload an image following the instructions on the video tutorial. Can anyone help? There is no "place" in the dropdown menu. I see a "place embedded" and "place linked", which don't work. My aim is to layer an image over existing content.