Test connection of target data server

Hi All,
Is there any command we can put in package which will test the connection to target datastore.
Same thing we are able to do in Topology Manager with test button of Dataserver.
What we want if the connection is o.k then only our interface should executes.
Thanks a lot for your help.

Hi Sandeep,
Write a small procedure to test the JDBC connection to the Target (DEST) server using the following.
java.sql.Connection sourceConnection = odiRef.getJDBCConnection("DEST");
java.sql.Statement s = sourceConnection.createStatement();
For reference refer the following url.
http://gerardnico.com/doc/odi/webhelp/en/ref_api/getjdbcconnection.htm
Thanks,
Yellanki

Similar Messages

Connect to a data server with topology manager

Hi! I am new to ODI...
I've created a master and work repository. Now I'm in topology manager to create a data server from Physical Architecture. I succeed in connecting to this data server with "Oracle Toad" using a service name...so I select JDBC driver and then I insert jdbc:oracle:oci8:@<tns_alias> (with the right service name).
Then it give me the message that it can connect to the data server, but when i click ok, it says me:
{color:#ff0000}java.lang.UnsatisfiedLinkError: no ocijdbc10 in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at oracle.jdbc.driver.T2CConnection.loadNativeLibrary(T2CConnection.java:3013)
at oracle.jdbc.driver.T2CConnection.logon(T2CConnection.java:228)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:361)
at oracle.jdbc.driver.T2CConnection.<init>(T2CConnection.java:142)
at oracle.jdbc.driver.T2CDriverExtension.getConnection(T2CDriverExtension.java:79)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
at com.sunopsis.graphical.frame.b.jz.dP(jz.java)
at com.sunopsis.graphical.frame.b.jz.bD(jz.java)
at com.sunopsis.graphical.frame.bo.bz(bo.java)
at com.sunopsis.graphical.frame.b.jz.em(jz.java)
at com.sunopsis.graphical.frame.b.jz.<init>(jz.java)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at com.sunopsis.graphical.frame.bb.b(bb.java)
at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
at java.lang.Thread.run(Unknown Source)
{color}
My environment variable for Oracle are:
C:\oracle\ora92\bin;C:\Programmi\Oracle\jre\1.3.1\bin;
I succeed in connecting with OCI using Toad...why can't I connect with ODI? Need I to install another component? (and which?)
Sorry for my english...please help me! thanks....
Alessia
Edited by: user1762560 on 26-feb-2009 9.06

jdbc:oracle:oci8:@tns_alias
it doesn't contain the sign '< ' or '>'

ICM_HTTP_SERVICE_UNAVAILABLE when testing connection to a HTTPS server

Hello SAP gurus!
I have created a RFC connection to a wsdl server using the SOAMANAGER, which is on the secured connection (https). SAP cryptographic library is installed, in ICM I see the both services green (active). And still when I try to test my RFC connection in SM59 I'll get ICM_HTTP_SERVICE_UNAVAILABLE.
How come? When my HTTP SERVICE (as seen in TA smicm) is on and active? :-o
Any hints?
Thanks for help in advance.
Cheers!
- Stefan

Well, the result is like this:
Ping the HTTPS server (hostname or IP address, both returned same results) with the terminal from the application server:
100% packet loss.
The OS is openSUSE and the proxy setting is set correctly (firefox sees the internet... it also can view the https server mentioned above)
Ping from SAP (with OS01) also 100% loss, though the general proxy setting is also set.

Prolem In Connecting to Microsoft Excel Data Server

Hi,
I used this link as guide:-
https://blogs.oracle.com/dataintegration/entry/connecting_to_microsoft_excel
But I failed to connect *' Microsoft Excel Data Server'*.Hete is the error msg during connection test->
java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
     at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java:1118)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.getLocalConnect(SnpsDialogTestConnet.java:420)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.localConnect(SnpsDialogTestConnet.java:860)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.jButtonTest_ActionPerformed(SnpsDialogTestConnet.java:806)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.connEtoC1(SnpsDialogTestConnet.java:165)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.access$1(SnpsDialogTestConnet.java:161)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet$IvjEventHandler.actionPerformed(SnpsDialogTestConnet.java:111)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2319)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
     at java.awt.Component.processMouseEvent(Component.java:6289)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3268)
     at java.awt.Component.processEvent(Component.java:6054)
     at java.awt.Container.processEvent(Container.java:2042)
     at java.awt.Component.dispatchEventImpl(Component.java:4652)
     at java.awt.Container.dispatchEventImpl(Container.java:2101)
     at java.awt.Component.dispatchEvent(Component.java:4483)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2479)
     at java.awt.Component.dispatchEvent(Component.java:4483)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
     at java.awt.EventQueue.access$000(EventQueue.java:85)
     at java.awt.EventQueue$1.run(EventQueue.java:604)
     at java.awt.EventQueue$1.run(EventQueue.java:601)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
     at java.awt.EventQueue$2.run(EventQueue.java:618)
     at java.awt.EventQueue$2.run(EventQueue.java:615)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:175)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:170)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:162)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
     at oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter.getConnection(OnConnectOnDisconnectDataSourceAdapter.java:74)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter$ConnectionProcessor.run(LoginTimeoutDatasourceAdapter.java:217)
     at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:442)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:139)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:909)
     at java.lang.Thread.run(Thread.java:662)
Caused by: java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
     at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6957)
     at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7114)
     at sun.jdbc.odbc.JdbcOdbc.SQLDriverConnect(JdbcOdbc.java:3073)
     at sun.jdbc.odbc.JdbcOdbcConnection.initialize(JdbcOdbcConnection.java:323)
     at sun.jdbc.odbc.JdbcOdbcDriver.connect(JdbcOdbcDriver.java:174)
     at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriver(DriverManagerDataSource.java:409)
     at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriver(DriverManagerDataSource.java:385)
     at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriver(DriverManagerDataSource.java:352)
     at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnection(DriverManagerDataSource.java:331)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter$ConnectionProcessor.run(LoginTimeoutDatasourceAdapter.java:217)
     at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     ... 1 more
please help.
Thanks
Anindya

http://docs.oracle.com/cd/E21764_01/integrate.1111/e12644/excel.htm#BEIDHJAJ
http://odiexperts.com/odi_jdbc_excel/

Data Server Connection Problem in MII 12.1 Version.

Hello Experts,
I am using two instances of MII 12.1.8 Build (20), at which am recently facing problems in the Data Server Connections.
Am not able to connect to the Data Servers using connectors [IDBC, Virtual IDBC].
When I checked the status of the servers, it is showing the status as running but there is no available connections.
When trying to create the query templates I dont get the available tables list populated too.
The driver details for jdbc used are the default ones,
For IDBC,
JDBC Driver : com.inet.tds.TdsDriver
ServerURL : jdbc:inetdae:<ip_addr>:1433?database=<db_name>&sql7=true
For virtual IDBC,
ServerPackage: com.sap.xmii.Illuminator.connectors.Proxy
The error that we got in the LogViewer.
Log Record Details
Message: Unable to get a connection from the pool
Date:
Time:
Category: /Applications/XMII
Location: com.sap.xmii.Illuminator.tools.database.ConnectionHolder
Application: sap.com/xappsxmiiear
Thread: Thread[HTTP Worker [@2017129105],5,Dedicated_Application_Thread]
Data Source: j2ee\cluster\server0\log\applications_00.log
Arguments:
DSR Transaction: 603b4f9bad3011e0c6f000001b57fb82
Actually the connections were working fine, in both the MII instances am working on (of the same build).
Now they both have gone down, all of a sudden
Please suggest the checks and corrections, I should do to overcome this hurdle.
Thanks for any help in Advance.
J Linovaz

Hi Anshul,
Thank you for your kind response.
I am uisng SQL SERVER 2005 and I have also tried with MS JDBC driver versions 2.0 and 3.0.
and
    Connection Status   in DATA SERVER tab.
Server Name ABC
Connector Type SQL
Status Running
No. of Used Connections
No. of Available Connections
Max. No. of Used Connections
Max. Wait Time
This is the status that i am getting and there are no available connections..
Everything was working fine before two days and we are not trying anything new

DB2 Connect or Data Server Drivers

Can we use anything other than DB2 connect such as Data Server Drivers from IBM to be able to connect to the databases on mainframe?

HI,
check the available PAM guide for the same.
This should help you to check, whether other options are supported
Regards,
Atul B

How to implement SMTP Email ping / Telnet connection to a SMTP Server?

Dear all,
i want to implement an advanced email address check where a connection to target smtp server is performed and the reply from the server is read back.
This program should check if the user exists and is accepted by the smtp server.
An alternative/part of the solution could be to perform a TELNET connection to the smtp host and get the output without sending an email.
Has anybody done this before?
Thanks a lot in advance.
Regards,
Adam

Adam,
Check this program.
Cheers,
Thomas.
REPORT ZTMG_TEST LINE-SIZE 132.
* Test SAP FTP functions
DATA: BEGIN OF MTAB_DATA OCCURS 0,
LINE(132) TYPE C,
END OF MTAB_DATA.
DATA: MC_PASSWORD(20) TYPE C,
MI_KEY TYPE I VALUE 26101957,
MI_PWD_LEN TYPE I,
MI_HANDLE TYPE I.
START-OF-SELECTION.
MC_PASSWORD = 'password'.
DESCRIBE FIELD MC_PASSWORD LENGTH MI_PWD_LEN.
*-- FTP_CONNECT requires an encrypted password to work
CALL 'AB_RFC_X_SCRAMBLE_STRING'
ID 'SOURCE' FIELD MC_PASSWORD ID 'KEY' FIELD MI_KEY
ID 'SCR' FIELD 'X' ID 'DESTINATION' FIELD MC_PASSWORD
ID 'DSTLEN' FIELD MI_PWD_LEN.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
USER = 'userid'
PASSWORD = MC_PASSWORD
HOST = 'servername'
RFC_DESTINATION = 'SAPFTP'
IMPORTING
HANDLE = MI_HANDLE
EXCEPTIONS
NOT_CONNECTED = 1
OTHERS = 2.
CHECK SY-SUBRC = 0.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
HANDLE = MI_HANDLE
COMMAND = 'dir'
TABLES
DATA = MTAB_DATA
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC = 0.
LOOP AT MTAB_DATA.
WRITE: / MTAB_DATA.
ENDLOOP.
ELSE.
* do some error checking.
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
HANDLE = MI_HANDLE
EXCEPTIONS
OTHERS = 1.

Query in Data server of XML Technology

Hello,
We are doing Database to XML Transformation.we are achieving this successfully.
But we are facing problem in XSD placeholder in target data server i.e XML Data server
First time we mentioned absolute path of XSD and got target datastore by reverse engineer XSD structure.
if i export my project and model into another machine.Then at another machine if i run my package i am getting error like
Caused By: java.sql.SQLException: As no XML and no DTD were provided, the XML schema cannot be created
1)
My confusion is here, why every time during execution there is a need of XSD,because XSD represent the structure of XML file
And that structure ,i already imported in another machine i.e target model
2)
if there is need , then Can we embedd XSD with importing of project and model so that whenever we export that project model in another machine ,my XSD also imported .
3) OR
Is there any default location of data server of XML technology where agent will go for finding XSD ?
if more information required,let us know.
please suggest.

I haven't tried this myself but give this a go:
1. In Word, highlight the Title Row
2. Then go to Table > Repeat Header Rows. In Word 2007+ the Repeat Header Rows button is under the Layout section.
3. Save, upload and re-run.
Do the table headers now repeat?
I believe this post will also help you: Header table to repeat on every page

Test Connection with strange character

Hi, when I try the "Test Connection" in Schedule Data Refresh, it gives me a warning with strange characters. Even if the upgrade goes however successful.

Hi Gianluca,
This is a known issue and we are working to fix it. Please ignore this error and try scheduling refresh on the workbook.
-mini

Can't Create a Data Source - Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi there,
I am having a serious issue with The Power BI Data Management Gateway which I am hoping that someone can help me with.
Basically I am setting a connection between a Power BI demo site and a SQL 2012 Database based on Azure. The Data Management Gateway and is up and running, and Power BI has managed to connect to it successfuly.
By following the tutorials at
here I was able to successful create my Data Connection Gateway with a self-signed certificate.
However, when trying to create the data source I come into problems. The Data Source Manager manages to successfully resolve the hostname, as per the screenshot below:
Bear in mind that I exposed the require ports in Azure as endpoints and I managed to modify my hosts file on my local machine so I could access the SQL server hosted in Azure using its internal name -- otherwise I would not be able to get this far.
However the creation of the data source also fails when trying to created it whilst logged in the SQL server in question:
The Data Source Manager returns the error when using the Microsoft OLE DB Provider for SQL Server:
Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied
I tried using the SQL Server Native Client 11.0 instead but I also get an error. This time the error is:
Failed to test connection. Login timeout expiredA network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.Named Pipes Provider: Could not open a connection to SQL Server [53].
Some considerations
If I provide an invalid username/password, the Data Source Manager does say that the username and password is incorrect.
Firewall is turned off in the SQL Server (either way, this error also happens if I try top use the Data Source Manager whilst logged in the SQL Server itself).
SQL Profiler does not show any attempt of connection.
The SQL server instance in question is the default one.
The error happens regardless if I select the option to encrypt connection or not.
In SQL Configuration manager I can see that all protocols are enabled (TCP/IP, Named Pipes and Shared Memory.
The Event Viewer does not provide any further errors than the one I have copied in this post.
I'm at a loss here. Could someone please advise what might I be doing wrong?
Regards,
P.

Here is what I had to do to solve this issue:
Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
domain isn't trusted.
What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?)

Error while creating data server to connect into Hyperion Financial Manag.

Hi Cezar and others gurus,
I need some help in the follow issue:
I imported the technologie HFM (hyperion financial management) and it`s now displayed normally in the Physical and Logical architecture.
The drivers imported are: HFMdriver.dll
log4j-1.2.8.jar
odi_hfm.jar
odihapp_common.jar
And also imported the KMs about HFM.
Everything doing fine but when i try to create a data server into Physical Architecture, and went to test it, two different errors are shown (below).
i've already read many documentations but they didn't help.
I have ODI 10.1.3.4.0 and the hyperion server is working fine.
ODI server, my ODI client and HFM are located in the local machine.
In the "Topology manager" in "Physical Architecture" under the "Hyperion Financial Management" I try to create "Data Server" and in the definition tab I filled "Name", "Server" (without port), "User", "Password".
In the JDBC tab I did nothing.
I go test and the errors appears.
In the physical schema in the definition tab I cannot fill the items "Application (Catalog)", "Application (Work catalog)" because they don`t have any option and i let them "undefined"
When i select "Local (no agent)",receive the error:
Connection failed
Java.lang.SQLException: Driver must be specified
java.sql.SQLException: Driver must be specified
     at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
     at com.sunopsis.graphical.r.or.o(or.java)
     at com.sunopsis.graphical.r.or.r(or.java)
     at com.sunopsis.graphical.r.or.g(or.java)
     at com.sunopsis.graphical.r.or.a(or.java)
     at com.sunopsis.graphical.r.or.a(or.java)
     at com.sunopsis.graphical.r.il.actionPerformed(il.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.Dialog$1.run(Unknown Source)
     at java.awt.Dialog.show(Unknown Source)
     at java.awt.Component.show(Unknown Source)
     at java.awt.Component.setVisible(Unknown Source)
     at com.sunopsis.graphical.r.or.q(or.java)
     at com.sunopsis.graphical.r.or.<init>(or.java)
     at com.sunopsis.graphical.frame.a.ji.bx(ji.java)
     at com.sunopsis.graphical.frame.bn.w(bn.java)
     at com.sunopsis.graphical.frame.bn.d(bn.java)
     at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener$ReleasedAction.actionPerformed(Unknown Source)
     at javax.swing.SwingUtilities.notifyAction(Unknown Source)
     at javax.swing.JComponent.processKeyBinding(Unknown Source)
     at javax.swing.JComponent.processKeyBindings(Unknown Source)
     at javax.swing.JComponent.processKeyEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.KeyboardFocusManager.redispatchEvent(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
and when i select a agent created before, i receive:
Connection failed
Java.land.Exception
at com.sunopsis.graphical.r.or.a(or.java)
     at com.sunopsis.graphical.r.or.s(or.java)
     at com.sunopsis.graphical.r.or.g(or.java)
     at com.sunopsis.graphical.r.or.a(or.java)
     at com.sunopsis.graphical.r.or.a(or.java)
     at com.sunopsis.graphical.r.il.actionPerformed(il.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.Dialog$1.run(Unknown Source)
     at java.awt.Dialog.show(Unknown Source)
     at java.awt.Component.show(Unknown Source)
     at java.awt.Component.setVisible(Unknown Source)
     at com.sunopsis.graphical.r.or.q(or.java)
     at com.sunopsis.graphical.r.or.<init>(or.java)
     at com.sunopsis.graphical.frame.a.ji.bx(ji.java)
     at com.sunopsis.graphical.frame.bn.w(bn.java)
     at com.sunopsis.graphical.frame.bn.d(bn.java)
     at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Some help will be gratefully aprecciated.
Thanks in advance,
Best regards,
Daniel Hein

Good morning Cts and other gurus,
Thanks for the answer but i'm still not able to connect to HFM.
I am getting an error while trying to reverse engineer (this errors is shown at Agent): error ocurred in driver while connecting to HFM [<undefined>] on [apphyp] using user-name [sql_hyp].
Caused by: com.hyperion.odi.hfm.wrapper.HFMexception: opening HFM application failed. Error code: 0x80046053 [This application is not registered with Hyperion Shared Services. Please contact your administrator]
You told me that it`s normal the error when i try to test the data server but both Application (catalog) and Application (Work) stay <undefined> and nothing can be select in that section. I guess this should be completed with my existing applications ate HFM.
Probably, the error mentioned happens because this item "Application" isn`t correct.
What am i missing?
Thanks in advance,
Best regards,
Daniel Hein

Can dw cs3 connect directly to sql server database without a testing server?

I'm new to dreamweaver but have used script tools that link
directly to my sql server database.
Not in dw, so far. As of this early stage, I don't have or
want to use a web server, and it's blocking me
without one. I just want to prototype without a testing
server, directly to my database. And while I'll try php
later, I didn't want to have to get into it or cold fusion,
etc. right away.
Can dw connect directly to sql server database without a
testing server?
I'm running XP sp 3 at this point, and don't see IIS. There's
probably some security issues
I'll have to tangle with. The goal is for my website to end
up on the company intRAnet, not the www.
fwiw, I can Build in Data Link Properties and get a
successful test to my sql server database via
Microsoft Data Link, but once I go back and try the test in
OLE DB Connection it balks on the testing server,
as I don't have one locally or otherwise. Isn't there a way
to link to db without a testing server?
Thanks for any insights.

Art wrote:
> You can connect to SQL server using ODBC in windows.
Yes, you can. However, Dreamweaver's PHP server behaviors
work only with
MySQL. To connect to any other database, you need to hand
code
everything yourself.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my we

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!

Hello Els,
it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable.

Issue in creating a connection to the target GlassFish Server .

Hi ,
I am facing issue Creating a connection to the target GlassFish Server.
I am using jdevelepor version 11.1.1.4.0. Here i am trying to create an application server connection.
But in the Application navigator i couldnt able to lcate the (In the Application Server Navigator, right-click Application Servers and choose New Application Server Connection) new aplication server connection.
In the componet palette there is IDE connection inside it the appliction server is present.When i right click on it i am able to locate the New Application Server Connection.
But i am not able to get the the below mentioned steps,
In the New Gallery, expand General, select Connections and then Application Server Connection, and click OK.
In the Resource Palette, choose New > New Connections > Application Server.
In the Create AppServer Connection dialog, on the Usage page, select Standalone Server.
On the Name and Type page, enter a connection name.
In the Connection Type dropdown list, choose:
GlassFish 3.1 to create a connection to the GlassFish Server
Click Next.
Could you please help me on this issue.
Thanks & regards
Binsy

Hi,
So i don't need to configure this manually as per the steps.
Then why i am getting the error when trying to deploy an EAr to glassfish?
Steps which i followed to Deploy the EAr,
1)I have created a ear file in JDEV.
2)in glassfish admin console, deployed the ear by choosing the file from the deploy location.
I am geting eror ..
For one application i am getting
Error occurred during deployment: Exception while loading the app : java.lang.IllegalStateException: ContainerBase.addChild: start: org.apache.catalina.LifecycleException: java.lang.IllegalArgumentException: java.lang.ClassNotFoundException: oracle.adf.mbean.share.connection.ADFConnectionLifeCycleCallBack.
For another application getting the error,
Interceptor binding contains an interceptor class name = oracle.jbo.server.svc.ServiceContextInterceptor that is not defined as an interceptor.
Could you please help me...

"unable to connect to the data access service" installing report server

Trying to do a 2 server SCOM 2012 R2 install on Server 2012 w/SQL 2012. Management server and operations console on one, and SQL, web console, and reporting server on the other. When I get to the web console and reporting server install, and
the "Specify Management Server" screen, I input the 1st management server name and it gives me a red X with the message:
"Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are all the same version."
Here is the setup log error:
"Info: :Could not connect to Management Server: scom-app with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
too long."
I don't see the "Data Access" service in services on either server. I followed all of the setup prereqs in SCOM 2012 unleashed book, and also referenced this article for setup advice:
http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
Everything seems to be working until I get to this point.
Thank you for any help you can provide,
Dan

Hi Tom,
1. Did the setup complete successfully on the MS and Console server?
>>>Yes, without issue
2. You do not see the service "System Center Data Access Service"
>>>I do indeed see it on the MS and Console server, it is set to Auto and running. (I also tried rebooting this server and retried, no help)
3. Is the Windows Firewall enabled?
>>>It has symantec endpoint protection. I disabled symantec completely on both servers and retried, no help.
Thx,
Dan

Test connection of target data server

Similar Messages

Maybe you are looking for