Test scenario with CRM

Hi experts,
could someone give me a little help with the following scenario inside XI, please?
CRM services as ESA CRM :
a customer should be able to retrieve a list of all his open transactions since a given date. to retrieve this content 2 RFC are availeble :
Z_READ_OPEN_TRANSACTIONS
-) input : partner number + date_from (YYYYMMDD)
-) output : table with transactions guids (GUID STRING 32 format)
BAPI_BUSPROCESSND_GETDETAILMUL
-) input table with transactions guids (GUID STRING 32 format)
-) output : details of transaction
NOTE ! no additional RFC may be created
3 scenario's to work with :
1) File adapter :
customer place XML (request.xml) in a directory
XI will need to generate a file in format of response.xml
2) Web service scenario
generate a web service with the same functionality as the file adapter
create a test application fot the web service
3) ABAP proxy scenario
XI developer : generate ABAB proxy for the request en response message, Note down the generated ABAB developer
write a BSP front-end for the generated proxy
question
could somebody send me in the right direction to configure an to become a proper result for this 3 scenarios from start till finish please ?
best regards,

Hi Gwen,
I'm nost sure anyone will give you
a description of all of your scenarios
as they are already described in many
weblogs : files, WS and proxies
so all you need to do is to find appopriate
weblogs and follow them
...then if you have any problems with your scenarios
you can come back and ask in case of any issues
you're scenarios are look quite standard
so the weblogs should provide you with all
detailed steps you need
for a list of weblogs have a look at this thread:
Re: Real Job senario.
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Similar Messages

  • Customer specific codelists in integration scenario with CRM onPrem

    Hi,
    we are working on an integration scenario C4C <> CRM onPrem. The businesspartner masterdata should be editable in C4C and CRM.
    We have several customer specific fields on the businesspartner in both systems.
    In CRM we have implemented customizing for the values of these fields via customizingtables that can be maintained with TX:SM30.
    We can also create finetuning-activities for the maintenance of the code lists for these fields in C4C.
    As these customizingtables can have around 1.000 entries per table we are searching for a solution to maintain the values just in CRM instead of maintaining them twice.
    Does anybody has an idea how to replicate customer specific codelist-values from CRM into C4C? Or maybe a valuehelp in C4C that retrieves the values via webservice from CRM?
    Thanks
    Danny

    Hi Danny,
    We have requirement like get all Oper Order based on Account from ECC to cloud and we have successfully achieved using External Web Service Integration.
    We have consume ECC web service integration and retrieve all Open orders based on Account ID and display in the table.
    So as per my knowledge you can read all value using web service call and maintained in custom OVS ( I have never tried ).
    You need to check whether is it possible or not using custom OVS but if it is working for table than it may be work for custom OVS as well.
    Please check this post below may be helpful to you
    SAP Cloud SDK : Bi-directional Custom Web-service Integration with PI
    Regards,
    Mithun

  • Inter-Company Sales Scenarios with CRM Service

    Hi,
    We are in a process to implement CRM 7.0 for our B2B service organization.
    Currently, we have ECC 6.0 implemented with single instance worldwide, one controlling area, one global chart of account and one fiscal year for all company codes in SAP and for each company code we have 1:1 mapping to sales organization.
    We have model in Europe where all our inventory is owned by one company code (one legal entity refer to as the  'principal' )and plants abroad functionality activated in SAP .
    In each country we have operating legal entity, company code and sales organization set-up in SAP but the inventory is still owned only by the 'principal'.
    It means that for each sales we have  in those sales organizations, additional inter-company billing is done between the 'principal' to that sales organization.
    This is done for all items sold either if they tangible items and non-tangible items for regular sales orders, contracts, debit memos and credit memos.
    The Intercompany billing should be generated base on the end-customer price less the certain percentages.
    CO-PA model is not active in our SAP system therefore we are going to use single-object controlling scenario for all our service processes.
    I have few questions:
    1. Can the plant associated with the u2018service organizationu2019 in CRM belongs to different company code from the company
        code of the billing unit
    2. Can we have the internal order in single-object controlling scenario for service contracts for revenue recognition to
        be set-up in company code of the billing unit  but the internal order to collect the cost either if it is parts or labour created
        in a different company under the u2018principalu2019 company code where we own the inventory u2013 It means that the I/O for revenue
       and cost will have to be different.
    3. Can we generated intercompany billing in CRM for any billing done to end-customer between the u2018principalu2019  to
        the sales organization either if it is for parts or labour or service contract or debit memo or credit memo .
    Regards,
        Avishay

    Hi
    See SAP Note 338922 - Analysis note for cross-company transactions (delivery).
    I hope this heps you
    Regards
    Eduardo

  • How to test Scenario with AS2 adapter..!!!Very Very Urgent..!!

    Hi All,
    We have provided the partner details like AS2ID,URL,Port and certificates.
    They ask me to do some sample testing whether files are reaching to partner system or not.
    I done all the required steps in IR and ID...
    1. Can anyone suggest me how to do the testing
    2. Where to monitor for AS2 messges?
    3. How to see the our output files whether we are sending the correct files or not?
    4. Outbound -- How we will come to know whether file reached to partner or not?If we set sync Mdn.. where we can see the MDN..?
    5. Inbound-- How we will come to know whether file has sent to us or not?
    Someone pls explain step by step how to do the testing using AS2 adapters for both Outbound and Inbound.
    Its Very Very urgent.
    Waiting for your replys..
    Regards
    Deepthi.

    Hi Deepthi,
    1. Can anyone suggest me how to do the testing
    A) Like message monitoring in RWB we have a particular link to monitor the message through differnt seeburger adapter.
    I dont remember the link right now.
    2. Where to monitor for AS2 messges?
    A) Through the same link.
    3. How to see the our output files whether we are sending the correct files or not?
    A) u mean to check the output file data or strucutre if strucutre is not proper then u will get the error message and ur mapping fails.
    4. Outbound -- How we will come to know whether file reached to partner or not?If we set sync Mdn.. where we can see the MDN..?
    I have no idea.
    5. Inbound-- How we will come to know whether file has sent to us or not?
    File is sent over wan so when it will be pickd up by XI.
    Thnx
    Chirag

  • CRM extractor Testing Scenarios.

    Hi Gurus,
    I need to extract the Activities from CRM to BW. This data must be extracted with the standard extractor
    0CRM_SALES_ACT_1
    0crm_srv_process_h
    0CRM_ERMS_ITEMS. When I test this extractor in RSA3 (in CRM), I obtain records that is less than "Activity Monitor" (CRM SIDE) . I checked in tables in CRM end and those tables have more than RSA3 extractor data.
    **How can help me out in giving the testing scenarios for the above extractor to be testing compelted E2E and kindly provide me with steps how to check if CRM data fully extracted into BW? or not ?**
    Thanks
    Naren

    Hi,
    CRM to BW extraction
    also pls check BI Best Practice ?
    http://help.sap.com/bp_biv335/BI_EN/html/bw.htm
    'Customer Relationship Management'
    e.g
    http://help.sap.com/bp_biv335/BI_EN/html/BW/SalesAnalysis.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f2910623-0c01-0010-de8f-d1926988a986
    Have a look at these linsk from help.sap
    http://help.sap.com/bp_biv135/html/bw.htm
    http://help.sap.com/bp_biv135/html/BW/SalesAnalysis.htm
    http://help.sap.com/bp_biv235/BI_EN/index.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
    It might help u.....

  • Issue in SOAP PI  Scenario(With Load Test)

    Hi all,
    we are in the middle of load testing,
    Scenario: SOAP> PI....
    here are the findings,
    1. when the size of the xml is for say upto 60 line items, the message gets to PI and gets processed.
    2. when the size of the xml is for 100 lineitems , the message doesn't even log @ PI in the AF/ IE.......but the caller of the service gets back a blank response after 2 minutes.
    Can someone throw light into what direction i have to look into,
    ive looked even in the server logs, don't know whr else to look. Can some1 tellme wher to look @ or what approach that i should take?

    Hello hankovak jovani ,
    We are doing SOAP testing using XML SPY editor , after creating the webservice in ID and we have dowloaded the WSDL,  uploaded the WSDL into XML SPY and send a request from XMLspy to PI .. it says empty response has sent , We tried changing the XML file but it did not worked
    I have checked in runtimework bench ..message id generated but there was no payload in that.
    Can you please help me by sharing the procudure how to do this testing or the way forward to over come this problem ?
    Waiting for your response....
    Thanks
    Sangeet

  • ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

    Hi,
    we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
    Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
    My question is:
    We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
    It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
    Best regards,
    Steven

    Hi Abhishek,
      This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna  maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
    Thanks in advance.
    Regards,
    Arunmozhi.

  • How to execute Script in Test Plan with two different System Data Container

    Dear members,
    I have a requirement.
    I need to execute one Test Config in a Test Plan with one System Data Container and another Test Config in a Test plan with another SDC.
    How to achieve this ?
    Kind regards,
    Pradeep
    Edited by: Pradeep Singh Rawat on Mar 23, 2011 7:10 AM

    >
    Pradeep Singh Rawat wrote:
    > I need to execute one Test Config in a Test Plan with one System Data Container and another Test Config in a Test plan with another SDC. How to achieve this ?
    Currently it is not possible, to maintain more than one SDC on a test plan.
    A workaround is, to maintain one SDC on a test plan and specify no target system direct in a test plan. If you maintain then your  two systems in one SDC, you can specifiy each target system in the test configuration, where it is needed.
    Here the example:
    test plan:
    systemdata container: SDC_ALL
    target system: <empty>
    test config 1:
    systemdata container:
    target system: CRM
    test config 2:
    systemdata container:
    target system: ERP
    systemdata container: SDC_ALL
    target system: CRM -> rfc 1
    target system: ERP -> rfc 2
    Kind regards,
    Christoph

  • Is it possible to connect  R/3 4.6c with CRM 7.0 EHP 1 to use Webchannel

    Hi Team,
    As per release notes of EHP1 for CRM 7.0 it is understood that, minimum ERP version required is 
    : SAP R/3 Enterprise 4.7 Extension Set 1.10.   to connect to CRM 7.0(EHP1).
    Question: In any way is it possible to use R/3 4.6C with CRM 7.0 EHP1for Webchannel scenario.?
    Please share any information on this scenario if anyone is aware.
    Thanks in advance.
    Points would be rewarded.
    Thanks,
    S.Pingili

    Hi,
    Check Product Availability Matrix (PAM) on the SAP Service Marketplace under http://service.sap.com/pam.
    Note 1147879 - webshop 4.0 and mySAP ERP 2005
    Note 1587172 - Maintenance strategy for "SAP E-Commerce 5.0 for SAP R/3"
    Denis

  • Multi resource Scheduling with CRM

    Hi MRS Experts,
    I am an CRM consultant working on a scenario of resource planning in SAP CRM services. We have a scenario where the user creats a service order in IC web client. As soon as he creates a service order two things should happen:
    1) Appoint scheduling based on customer availibility
    2) resource (employee) scheduling
    Regarding this I have following questions:
    1) Can MRS work in this scenarion (resource scheduling in/with SRP CRM?
    2) Is it a standard integration?
    3) What it takes to integrated MRS with SAP CRM?
    4) What data points are required to in mRS from CRM to for resource scheduling and appointment scheduling:?
    5) If we are correct WFM is not requred for MRS?
    6) How MRS integrates with mobile application fro the service scenario?
    7) is it advisibel to use WFM or MRS, with CRM?
    PS: Guys its great to have such discussion, the doc links mentioned in the first page do not work.
    I would realy appriciate if somebody clarifies the above queries as early aspossible as i am struggling at this point a lot.
    Thanks in advance.
    Please assist.
    Regards
    Adi

    Hello Aditya,
    1) Yes MRS can work with CRM. But with the current release in service market place (whcih is MRS 610) it is not possible to have this as out of the box solution.
    You will need to enhance MRS to enable this.
    2) With the new release, which is due this year, it will be possible to integrate CRM service orders with MRS.
    3) MRS provides more functions with respect to service planning. So I would say MRS should be preferred solution.
    Regards
    Varun

  • How to Configure and Integrate EP with CRM

    Hi Everybody,
    I want to integrate EP with CRM.
    I am using SAP WAS Server.I have installed Portal.
    I downloaded CRM Business packages.
    1)How to integrate and configure in the EP with SAP R/3(CRM Module).
    2)What are the prerequisities.
    Plaese prove the exact help and documents.

    Hello,
    I think this <a href="http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N12_Scen_InstallGuide_EN_US.doc">Scenario Installation Guide</a> from the <a href="http://help.sap.com/bp_epv260/EP_EN/index.htm">SAP Best Practices for Enterprise Portal V2.60</a> can help you.
    Regards
    Gregor

  • Synchronous File- Soap scenario with fault message

    Hi!
    I have a File to Soap synchronous scenario.
    All is right when no exception is returned by the web service.
    I want to use fault messages to catch thoses exceptions, so I have added fault message in message interfaces and in the mapping program in the interface mapping.
    Now, when the web service return an exception like :
    <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
       <soap-env:Body>
          <soap-env:Fault>
             <faultcode>soap-env:Client</faultcode>
             <faultstring xml:lang="en">NOT_CREATED</faultstring>
             <detail>
                <n0:Z_WS_CREATE_WAGON.Exception xmlns:n0="urn:sap-com:document:sap:rfc:functions">
                   <Name>NOT_CREATED</Name>
                   <Text> does not have packaging material type and is therefore not a pack.mat.</Text>
                   <Message>
                      <ID>HUSELECT</ID>
                      <Number>041</Number>
                   </Message>
                </n0:Z_WS_CREATE_WAGON.Exception>
             </detail>
          </soap-env:Fault>
       </soap-env:Body>
    </soap-env:Envelope>
    I get the following error :
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
       <SAP:Category>XIServer</SAP:Category>
       <SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
       <SAP:P1>http://www.arcelormittal.com/radis/rad IM_RAD_to_ZWsCreateWagon</SAP:P1>
       <SAP:P2 />
       <SAP:P3 />
       <SAP:P4 />
       <SAP:AdditionalText />
       <SAP:ApplicationFaultMessage namespace="" />
       <SAP:Stack>Interface mapping http://www.arcelormittal.com/radis/rad IM_RAD_to_ZWsCreateWagon does not exist in runtime cache</SAP:Stack>
       <SAP:Retry>N</SAP:Retry>
    </SAP:Error>
    My mapping program for fault message is well defined (I tested it with the exception message received from the web service).
    I have also refresh caches, but without success...
    Can anyone help me ?
    Thanks in advance,
    Laurence

    Hey Laurence,
    A File adapter is aysnchronous u cant use for synchrous because it cant acknwlodge the response it gets or itt sends.
    regarding two asynchoronus
    1. file to SOAP asychn.
    2. triggger the second one if SOAP has exception then pass the error from SOAP to New File.
    using BPM we have to use Transportion level acknowledgments
    please reward points if it helps
    Regards
    Sreeram.G.Reddy

  • ABAP HR-test scenario for payslip-urgent

    Hi,
    please send me some test scenarios for payslip by which payslip can be affected.
    I have designed a PAyslip with retro and i want to test it.
    eg. retro. means if retro will run then it will affect payslip.
    Also send me some unit test cases in case of any payslip requirement.
    Points will be rewarded.
    Regards
    Monika

    Hi,
    Just give an entry in infotype 8, 14 or 15 for previous month and run the payroll than retro will run, than compare results using wage type reporter.
    When you run the payroll give the sandard SAP Remuneration and compare the results in the SAP payslip and payslip you have developed.
    If you have developed payslip using PE51 than the retro amounts are picked authomatically.
    Regards,
    Ramu N.

  • Idoc-XI-file test scenario

    i m new to XI,
    i wanna make a test scenario for idoc-XI-file...
    i donno what an idoc is.......
    tell me how to create an idoc from the very basics....like message type, segment, partner profile, port creation, etc,..... and how to fire an idoc from the R3 system to my XI system,
    and ofcourse... ican do the rest of mapping and all, with the file message type

    Hi Sudeep,
    1. steps for creating customized Idocs..
      we31- creation of Segments
      we30- creation idoc types
      we81- creation of Message types
      we82- assigning message type to Idoc type...
    2. R/3 Configuration settings
      SM59 -  creation of RFC destination...
      we20  -  creation of Ports
      We21 -  Creation of Partner profiles..
    3. XI Configuration settings
      SM59  - Maintain RFC destination,
      IDX1    - Maintaining port for XI
      IDx2    - Loading the Idocstructure into metadata repository
    These are the settings to be done before starting ur scenario..
    I think this will help you... points...
    regds,
    vasanth.

  • Best practice for developing with CRM 2013 (On Premises)

    Hello all.  I'm just starting to work with CRM, and I have some questions that hopefully will be simple for the seasoned developers.  It's mostly just some best practice or general how-to questions for the group.
    - When creating a new Visual Studio CRM Project I can connect to my CRM Instance and create new WebResources which deploy to the CRM instance just fine, but how can I pull all the existing items that are in the CRM Solution into the Visual Studio CRM project?
     Or do I need to export the solution to a ZIP, expand it with SolutionPackager.exe, then copy these into my Visual Studio project to get it into sync?
    - When multiple developers are working on changes is it best to keep everything in a Visual Studio project as I mentioned above, or is it better for everyone to have their own instance of CRM to code with so they can Export/Import solutions as needed then
    these solutions be manually merged before moving into a common Test/QA environment?
    - When modifying the submenu on a CRM form is it suggested to use Ribbon Workbench or is it better/easier to just export the solution, expand it with SolutionPackager.exe,  modify ribbondiff and anything else required for the change, package it
    back up, then reimport to CRM?  I've heard from some that Ribbon Workbench has some limitations, but being green I wasn't sure what those limitations might be or if it'd be best to just manually make these changes.  Or is thre any way to have a copy
    of ribbondiff in Visual Studio and deploy this without having to repackage the Solution and Import in the ZIP?
    I think that's it for now :)  Thanks for any advise or suggestions.  I really want to start learning the in's and out's of CRM and how all the pieces fit together.  Also can someone direct me to some documentation or books that might give
    more insight on developing for CRM 2013 or 2015 (moving to this soon)?
    Thanks for your time.

    Hi Sam
    Also interested in best practice around this area - especially recommended development routes, unit testing, continuous integration etc - it would be great if you posted here if you find any good articles etc. At the moment we tend to just push changes
    onto a live system as and when appropriate and I'd prefer to move away from that...
    Thanks
    Stuart

Maybe you are looking for

  • Error while looking up EJB

    Hello, I'm trying to develop EJBs 2.0 for my company. creation and EJB deployment works fine, but when I try to look up my EJB, I get a NamingException. EAR is deployed on a Websphere Application Server 5.1, and I would like to communicate with my EJ

  • Blue selection when scrolling

    when i"m using the trackpad on my air, especially in safari, it will select the text (in blue) and sometimes click without me clicking...Is this a software issue?

  • Won't boot shows circle with line through it

    Hi, I just started my Mac Mini and the apple logo turns to a circle with a line through it.  Any ideas?

  • The 'Contain' Queries on Intermedia ORDDOC fails

    Hi We are using Intemedia to Manage multimedia content. We store a lot of document using OrdDoc. We were able to index the content using "create index contentstoreindex on CONTENTSTORE(CNTSTR_FILE.Comments) indextype is ctxsys.context " Now we have p

  • List of Variables Possible?

    Is there a way to list all the variables (names & defs) in a book, not unlike a list of figures, etc.?