Test UUT and SIngle Pass missing during deployment

With the help of this forum, I managed to get a Teststand deployment working.... thanks for the help.
I do have one issue though...I am using the SImple User Interface in a parallel model. In my project, when I open the Testexec and sequence, I have 3 options. These options are Test UUT, Single Pass, and Run Sequence. After compilation and running Testexec, I only have Single pass.
Any idea why this would happen? I keep trying different things but it takes forever to create builds.
Thanks,
Ryan
Solved!
Go to Solution.

Norbert,
Thank you for your reply. I attached two screenshots....one before deployment (on my development PC) and one after (on my test machine). I did see something odd when capturing the screens. You will notice that the "Main Sequence is GREEN on the deployment PC, but once it is installed on the test machine, it is then BLUE.
I believe this is the issue but I don't know how to solve it. Please see photos.
Thanks!
Ryan
Attachments:
before_deploy.JPG ‏120 KB
deployed.JPG ‏57 KB

Similar Messages

Trouble accessing purchased TV shows both individual episodes and season passes missing since iPhone 4S was released. Anyone else having the same trouble?

I have this trouble anytime I access iTunes--whether it is via desktop, iPhone 4S, iPad 2, or Apple TV 2. I can't view all of my previously purchased material.
Please help. I called in to support days ago and was told there was an issue being worked on, but now it's nearing the two week mark and that is unacceptable to me.

Hi Everyone
After a month of going between iCloud & iTunes support on this - where we even were even at the point that iTunes attempted to restore our purchases but it still wasn't restoring all missing purchased episodes & those that were restored weren't appearing on all devices, we found the answer to our problem... And I bet it will solve your problem.
Log into our iTunes from your computer
Go to the store via iTunes (this worked on iTunes 11)
Click on your account
Under your account, there is an option for "Hidden Purchases" - click on this
Under each media tab it tells you what purchases have been selected to be hidden
Choose the media where you have purchase missing - for us it was TV Shows
Choose the individual episode / series / item
There will be an option to unhide - click on this button for each item
We found for iPad / iPhone we could see most of why was lost. On Apple TV 2, we had to reset / restore
This actually fixed our problem - I should point out that at no point did we select for any of our purchases to be "hidden" in the cloud and I would say this is a bug in iTunes / iCloud that Apple needs to address. I also think that an option for hidden purchases makes no sense for the majority of iTunes / iClouds users.
Hope this fix works for you - Cheers.

Which case in LV Oper. Intf. will do "Run Selected Steps using single pass" for me?

I added a button to simulate "Run Selected Steps", but I really want a button that will "Run Selected Steps Using Single Pass". Which case in the Complex Labview Operator Interface does this for me? What I really want is the report to be generated which happens when I use "Run Selected Steps Using Single Pass" but no report when I select "Run Selected Steps".
Thanks!

I figured out how to make this work. Instead of calling the Sequence File View Manager ConnectCommand method using the Run Selected Steps button and the CommandKind_RunSelectedSteps command kind, you use the CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind. The tricky part is that before you can use the ConnectCommand method with the CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind, you have to create a set of new commands. Do this by first invoking the Application Manager method NewCommands. This method returns an empty set of commands. You must then add a new command to that set. Do this by invoking the InsertKind method on the empty set of commands using CommandKind_RunEntryPointOnSelectedSteps for cmdKind, Sequence File View Manager for managerControl, -1 for insertBefore, and empty strings for currentMenuName and allMenuNames parameters. Once you have made these calls, then you can call the Sequence File View Manager ConnectCommand method using the CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind.
The previous instructions work just the same for the Loop On Selected Steps button. Just substitute the CommandKind_RunEntryPointOnSelectedSteps and CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind constants with CommandKind_LoopEntryPointOnSelectedSteps and CommandKind_LoopOnSelectedStepsUsingEntryPoints_Set command kinds (and of course use the Loop On Selected Steps button reference instead of the Run on Selected Steps button reference when invoking the ConnectCommand method).
There is one mystery with this solution that I haven't figured out yet, besides the fact that it is so laborious and non-intuitive to me (but at least it works). Nowhere in any of the calls detailed above did I ever see a parameter to specify which execution entry point to use. I am using the default sequential model entry points Test UUTs and Single Pass. Typically you specify which entry point you want to use (such as when invoking the ConnectCommand method) in the form of an index to a set of entry points where the Test UUTs entry point corresponds to a set index of 0 and Single Pass corresponds to a set index of 1. How did the previous calls determine which entry point to use when I didn't specify anywhere which one to use? Do this just work because you can only run or loop on selected steps using no process model or the Single Pass entry point?

In LabVIEW OI the Run Selected Step Using Test UUTs does not work

TestStand LabVIEW Operator Interface (old style) - TestStand Version 2.0.1 & 3.0
The Interactive option was enabled for the Process Model Entry Point - Test UUTs in the SequentialModel.seq.
When selective steps were selected to run within the LV OI using the menu item 'Run Selected Step Using - Test UUTs' it was found not to work.
The reason for it not working was because the main event string was "Run Selected Step 0" but this isn't available in the case statement. Changing the "Run Selected Step 1".."Run Selected Step 9999" to "Run Selected Step 0".. didn't produced the desired result. Instead of the selected steps running using the entry point Test UUTs, the steps ran without the process model.
The Case Statement string was retored back to "Run Selected Step 1".
The changes that are required to make the "Run Selected Step 1".."Run Selected Step 9999" work with either of the Entry Points are as follow.
In the VI TestStand - Create Entry Point Menus for Interactive Exec.vi
Insert an Increment from the iteration terminal of the FOR loop. This ensures the Message Queue string generated is in the range 1 - 9999 not 0 - 9999.
In the TestStand - Sequence Display.vi
For the Main Message Event "Run Selected Steps", "Run Selected Step 1".."Run Selected Step 9999"
In the case "1, Default", decrement the input 'Entry Point Index' to the VI TestStand - Start Interactive Entry Point Execution.vi. This ensures the Entry Point Index starts from the value 0.
Now when the selected steps are run using a Pocess Model Entry Point, they run correctly.
This problem only appears to affect the LabVIEW Operator Interface and only the old style. The new style that comes with TestStand 3.0 runs correctly.
There is one other problem. When an Operator is logged in to TestStand, the Entry Point - 'Single Pass' is disabled. But this is not reflected to the menu item 'Run Selected Step Using'. Both 'Test UUTs' and 'Single Pass' are available to the operator.
The reason for this is because in the VI 'TestStand - Create Entry Point Menus for Interactive Exec.vi' the sub menu item is enabled as a result from the property Sequence.AllowInteractiveExecutionOfEntryPoint. This is not enough to disable the 'Single Pass'. The Engine.CurrentUserHasPrivilege needs to be checked as well. Which means modications to the VI 'TestStand - Create Entry Point Menus for Interactive Exec.vi'.
Hope is maybe of help to anyone that may need to use this option.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
In_Labview_OI_-_Run_Selected_Steps_Using_Test_UUTs_doesnt_work.txt ‏3 KB

Thanks Ray for the "heads-up". )
I am about to implement a vi which calls TestStand functions. This vi will allow to select tests and permits test re-entry (loops) if the user has supervisor privileges.
I will consider what you recommend in this string.
I will also provide feedback on this thread if I discover anything .... let's say "unusual"..
On another note, I am using TestStand 3.0 I have not observed any problems when running selected steps or run selected steps using single pass. I have also within TestStand set privileges for certain Operators to do the same. They have not reported any problems.
Thanks,
JLV

Hide Test UUT button in 4.1

I am looking for a property in test stand 4.1 to allow me to enable/disable Test UUT and Single Pass buttons dynamically on the RTOI.
Your help is appreciated.

Depending on what RTOI you're using, you may want to dim or remove the menu options for the entry point. In the process model, the Test UUTs and Single Pass Entry Point sequences have a section (Entry Point Enabled Expression that you can add a variable or expression that you then control through your RTOI. I believe that this will also manage access to your buttons in the same way that the permissions allow access to the Single Pass entry point.
-Jack
Message Edited by Capt. Jack on 09-17-2009 11:53 AM

Which veriable in TS store the Execute mode (Test UUTs, Single Pass etc..)

I'm writing a program in CVI7.0 with TS3.0. I would like to inquire the TS to the Execute mode.--was the user selected Test UUTs (F5), or Single Pass (Ctr F5), or 'Run Main Sequence' or 'Run Selected Steps'.
Can you advise how to do that?
Thanks

Hello,
To determine which Execution Entry Point is being used to call your client, you can use the TestStand 3.0 API to call properties an methods that will return to you the name of the root sequence. I have attached a sequence file that makes ActiveX calls to the API to do just that and displays the result in a Message Popup step. If follows these steps:
1. Get the root context (this will be the context of the sequence of the process model that is used to execute, ie: Test UUT, or Single Pass).
2. Get the sequence from the root context.
3. Get the name of the sequence.
4. Display the name (if it is a Test UUT, I have preconditions set up to only display it on the first UUT tested).
If you chose, "Run Main Sequence", the name that you rec
eive will be "MainSequence" because the root sequence is not a Process Model sequence, but the MainSequence of the client file.
I hope that this is helpful. Take care and have a great day!
Aaron B.
National Instruments
Attachments:
GetExecutionInfo.seq ‏31 KB

Run test uut entry point only once

Hi,
I want to avoid that users can run test uuts entry point more than once. I use an operator interface written in CVI 7.1.1 and netry point button is deactivated when run state changes. But after loading the application sometimes is too slow so the user can press this button twice before it is deactivated.
So is there any possibility to avoid running this entry point more than one time?
Regards
Steffen

Steffen,
Thank you so much for the help. You recommendations worked perfectly. Both of us implemented more or less the same behavior in our operator interfaces, although we used slightly different methods. Here is what I did:
I established a count variable in my operator interface that is initially set to 0. Each time the Test UUTs or Single Pass button is pressed, I increment the count by 1. I determine that the Test UUTs or Single Pass button is pressed by registering for and handling the Application Manager PreCommandExecute event. In my callback for this event, I examine the returned Command and look at its EntryPointIndex property to see if the index is 0 (Test UUTs) or 1 (Single Pass). If it is, I increment the count variable count by 1. If the index is not 0 or 1, I do nothing. Once execution has stopped, I reset the count variable back to 0. I do this by registering for and handling the ExecutionView Manager RunStateChanged event (as you recommended). In my callback for this event, I examine the returned newRunState to see if it stopped (numerical value of 3). If it is, I set the value of the count variable back to 0. If it isn't stopped, I do nothing.
This method is basically the same as the one you propose. This method allows you to use the built in TestStand buttons instead of having to use those found in your development environment. The only drawback is that they don't disable and gray out during execution; they just do nothing when an execution is in progress and the operator presses them.

Change UUT serial Number with Single Pass in Batch model

How do I change the UUT serial Numbers with Single Pass in Batch model ?
I also like to change the UUT report path, so that each UUT saved in it's own directory.
TIA
George Zou
http://webspace.webring.com/people/og/gtoolbox

the path to the UUT report can be configured in the report options.
You can't specify unique path for each UUT in the report options.
Both report path and UUT serial number are stored in the sequence context during execution. So if you want to know where those variables are located (in order to change their values during runtime), you can set a breakboint in your sequence, change to the variabels tab and do a search for the variables (you perharps have to play around a bit with the searchstring though).
I've already find the place where TestStand holds the information. The problem is that there is no proper callback I can override.
I can only change the serial number in my sequence file. But that is too late to include the serail number in the report file name. The serial number inside the report does get changed.
By the way, I can't change the process model. User wants out of box batch model.
Thanks for reply.
George
Message Edited by zou on 06-19-2008 08:40 AM
Message Edited by zou on 06-19-2008 08:43 AM
George Zou
http://webspace.webring.com/people/og/gtoolbox

Hide Test UUT button during execution

Is there an easy way to hide the entry point button "Test UUTs" once it is clicked? I want to prevent an operator from starting up duplicate test executions.
I am using TestStand 3.5
Solved!
Go to Solution.

Thanks for the help,
What I ended up doing was using the PostUI message in the custom user message range (above 10000). Then I created a callback vi to handle user messages. I passed a reference to the Test UUT entry point button and enable or disable it. Basicly I can have my sequence handle the state of this button. The Post UI messages happen in the process setup and cleanup of my sequence files.
I attached a snapshot of the callback vi.
Paul
Attachments:
UIMessageCallback.jpg ‏56 KB

Deploy Lenovo with SCCM and enable Bitlocker during deploying?

Hi!
Do anyone got information how to activate TPM and enable bitlocker during deploy of new Lenovo with SCCM ?
Something like this but for Leonovo
http://www.nullsession.com/2010/12/02/enable-tpm-in-task-sequence-with-sccm-and-cctk/
Thanks, Magnus
Solved!
Go to Solution.

jamessnarey wrote:
has anyone been successful with the WMI script on the M92p models, I recently attempted to activate the TPM using the same script that we use for our M91p and it fails. When I check the logs, it states that access is denied, when I run it manually I get the same error (access denied). Our lenovo rep says that you cannot use the WMI to enable the TPM and that the Enable Bitlocker step should enable the TPM. However we automate our OS deployments so manually enabling bitlocker is not an option, any assistance or feedback is appreciated.
I was having the same issue and I discovered another way to accomplish this task. Download this utility:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_bios/9sjw67usa.exe
Run the EXE to extract the files to the location of your choice, then copy them to your script location. From your script, run the following command:
srwin.exe /tpm active
Then do a couple reboots (this may not be necessary, but I didn't have time to test it.)
There are a couple of caveats. First, the working directory must be the directory the utility is stored in (presumably so it can find the two .sys files). I.e. you can't do
c:\utilities\srwin.exe /tpm active
you have to do
cd /D c:\utilities
srwin.exe /tpm active
Also, I was attempting to run this in a WinPE session (doing OS deployment using SCCM 2012) and I was getting an 0x80070134 error in my logs. I had been using an x64 boot image, and switching to an x86 boot image resolved that issue.
Hope this helps someone.

I am trying to update the new OS however, I keep getting an error messaging saying to have my connectivity checked since it is not connected. I ran a diagnostics test and everything passed. Any ideas on how I can to make sure a connection is established?

I am trying to update the new OS system on my iPhone 4, however, when I connect to iTunes and try to download, I keep getting an error message that says the connection is not established. I ran a diagnostics test and everything passed, however, I'm not sure why I keep getting an error message when the software is at the end of downloading.
Any tips?

Disable your firewall/security software.

Test executive and Test stand deployment cost

Hello,
would some NI support engineer kindly answer below questions ? i would be obliged.
we have been running customized Test executive built from Test executive toolkit. We are now making decision as to whether We should migrate to test stand or keep the existing structure? Here are some questions:
1) in case We switch to test stand, do We still need to buy runtime engine license ?
2) can we call executables in Test stand ?
3) stating from ground zero, what is the deployment cost estimate between Test stand and customized test executive scenarios, from end user point of view ?
-Ahmed

Hi Ahmed,
To answer your questions:
1) You will need to have a deployment (runtime) license for all the machines that you plan on running your application on. However, you will only need a full development license for the computer that you are actually developing the application on. You can see a full explanation of the different types of TestStand license in the document "When Should I Purchase a License for my TestStand System?"
2) In regards to calling executables, TestStand has a builtin step to call executables making it extremely easy to do. You can download an evaluation copy of TestStand here to see how easy it is to use as well as see the simple Call Executable Step.
3) In regards to price comparison between TestStand and a customized test application, this really depends on the project. Each project can have a different cost. However, you can take a look at this cost analysis to get a general idea of one example of cost comparison. This is just an example and also compares an older version of TestStand.
For more specific information about cost, please contact a sales representative at (888) 280-7645.
Thanks,
Caroline Tipton
Data Management Product Manager
National Instruments

Sample test plan and deployment plan

Hi,
Is there anyone know where I can get the test plan and deployment plan samples regarding the configuration?
Best Regards
Jean

Hi Jean ,
A CD will be given by SAP for its customes named 'ValueSAP ' . IF you can install this CD , you can get these templates.
Thanks,
Sudhi

HT4743 I have a pass for a TV show and I'm missing episodes. Why is this?

I have a pass for a TV show and I'm missing episodes. Why is this?

Hello LaShea68
You should be able to see the download in your purchase section on your Apple TV. Also check on other devices like an iPad if you have one or in iTunes on your computer. If not, the report the issue to the iTunes Store.
Download past purchases
http://support.apple.com/kb/ht2519
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Regards,
-Norm G.

Authentication during deployment of app on mobile and storing authenticatio

I need to develop an application which will acquire user name and password details during deployment of the app on android mobile and it uses the authentication automatically when it connects to the remote server

duplicate of {thread:id=2478131}
Timo

Test UUT and SIngle Pass missing during deployment

Similar Messages

Maybe you are looking for