TestStand - Default Values 82.llb missing

I've recently upgraded to Labview 8.2 (I already had TestStand 3.5), and when I try to call a VI using some default parameters and some defined parameters, I get an error saying that "C:\Program Files\National Instruments\TestStand 3.5\AdapterSupport\LabVIEW\TestStand - Default Values 80.llb" is missing. Where do I get this file from? In the directory I see versions of this file for 8.0, 7.1 and 7.0 only. I've tried reinstalling TestStand and LabVIEW, but the installation options say everything is already defined, and i don't see an install component for anything like TestStand 3.5 LabVIEW Support.

Copy the 80 version, rename it 82. Mass compile this LLB in 8.2. This should fix your problem.
Allen P.
NI

Similar Messages

NaN as default value for LabVIEW numeric control

TestStand 2010 SP1, LabVIEW 2011 SP1
This may be a "feature" but I also may be missing something here.
Reproduce my issue doing this:
Create a VI with a numeric double. Set the value to NaN. Make that the default value. Connect it to the connector pane. Try and call it from TestStand. The prototype will not reload. Why? NOTE: it only works for controls and not indicators.
Not sure if it's related to this because that's in .NET: http://forums.ni.com/t5/Measurement-Studio-for-NET/NaN-as-default-value-for-a-numeric-edit-control/t...
We have hundreds of VIs with the default set to NaN. We started seeing this issue when we just upgraded to the latest dev suite.
Thanks in advance,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

The prototype reloads fine in TestStand 4.2.1 and LabVIEW 2010, as you probably already knew.
In TestStand 2010, the problem is that it doesn't reload only when you set to NAN? Or does it never reload no matter what the numeric value is?
What is your logic for using NaN values? Are these values that are not used in tests? We have a suite of over 50+ tests and I have never used NaN values as inputs.
Thanks,
PH

Default Value , Not Null and EJB2.1

Hi ,
Am using Weblogic10.3 + Oracle Db + EJB2.1 Local Entity Beans .
The issue is that one of the table has createdDt which is not null and is defualt is set to Sysdate. When I try to create this Entity with createdDt null , I get an exception like below , But since I have mentioned default value , I shouldnt be getting this. Have I missed something ?
Code is quite straighforward
Organisation org = organisationHome.create();
....org.setter methods..
java.sql.SQLException: [BEA][Oracle JDBC Driver][Oracle]ORA-01400: cannot insert NULL into ("XXX"."ORGANISATION_T"."CREATEDDT_F")
ErrorCode=1400 SQLState=23000
java.sql.SQLException: [BEA][Oracle JDBC Driver][Oracle]ORA-01400: cannot insert NULL into ("XXX"."ORGANISATION_T"."CREATEDDT_F")
     at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
     at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
     at weblogic.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
     at weblogic.jdbc.base.BaseStatement.commonExecute(Unknown Source)
     at weblogic.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source)
     at weblogic.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source)
     at weblogic.jdbcspy.SpyPreparedStatement.executeUpdate(Unknown Source)
     at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:159)
     at weblogic.ejb.container.manager.BaseEntityManager.executeInsertStmt(BaseEntityManager.java:763)
     at weblogic.ejb.container.internal.TxManager$TxListener.executeInsert(TxManager.java:900)
     at weblogic.ejb.container.internal.TxManager$TxListener.executeDBOperations(TxManager.java:831)
     at weblogic.ejb.container.internal.TxManager$TxListener.beforeCompletion(TxManager.java:1054)
     at weblogic.transaction.internal.ServerSCInfo.doBeforeCompletion(ServerSCInfo.java:1217)
     at weblogic.transaction.internal.ServerSCInfo.callBeforeCompletions(ServerSCInfo.java:1195)
     at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:118)
     at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:1302)
     at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:2114)
     at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:263)
     at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:230)
     at weblogic.ejb.container.internal.BaseRemoteObject.postInvoke1(BaseRemoteObject.java:621)
     at weblogic.ejb.container.internal.StatelessRemoteObject.postInvoke1(StatelessRemoteObject.java:60)
     at weblogic.ejb.container.internal.BaseRemoteObject.postInvokeTxRetry(BaseRemoteObject.java:441)
     at com.tieto.tix.core.domain.DomainServices_7p8lqs_EOImpl.createOrganisation(DomainServices_7p8lqs_EOImpl.java:7717)
     at com.tieto.tix.core.domain.DomainServices_7p8lqs_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
     at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

parmTest( , "param2") is syntactically incorrect, so there can be no "workaround".
In addition to solutions offered by SwapnilVJ and Saransoft84, you could also use a rest parameter:
function parmTest(... args)
// set up default values
var val1:Boolean=true;
var val2:String="";
switch(args.length)
case 0:break;
case 1:
   if(args[0] is String){val2=args[0] as String;}
   else{val1=args[0] as Boolean;}
   break;
case 2:
default:
   val1=args[0] as Boolean;
   val2=args[1] as String;
   break;
   trace(val1 + " " +val2);
parmTest();
parmTest("hello");
parmTest(null,"hello");
parmTest("hello",null);

SSRS Cascading Parameter Setting Default Value of Parameter by Expression

Hi All,
I need some help on an issue I am running into in SQL server 2008 report parameters. I have the following Report Parameters defined:
1) @PredefinedDateSelection - Boolean (User Selectable True/False, Default Value - 'False')
2) @StartDate - Text (User input text box)
If @PredefinedDateSelection = TRUE, then I would like to provide a particular default value to the StartDate textbox (i.e. @StartDate Default Value), If @PredefinedDateSelection = FALSE, then I would like to provide a different default value.
I have the following code for the Expression for the Default value of @StartDate: =code.GetStartDate(Parameters!PreDefinedTimeSelection.Value)
where GetStartDate is a very simple VB function defined as :
Public Function GetStartDate(x as boolean ) As String
Dim a as string
Dim b as string
a = "Report Uses Predefined Values"
b = "Please Input Value"
If (x) then
Return a
else
Return b
end if
end function.
Now the default value of @StartDate stays set as "Please Input Value", and does not change when I toggle @PredefinedDateSelection from False to True and vice versa. I was expecting to see the Default value to change between the two messages depending on my selection in the report preview.
Another parameter which is a dropdown and uses a dataset to display two different set of selectable items depending on the value of @PredefinedDateSelection is working just fine. I am not sure if I am missing something or I am doing something wrong.
Instead of using the VB code I also tried : =iif(Parameters!PreDefinedTimeSelection.Value = True,"Report Uses Predefined Values","Please Input Value")
I also tried changing the default value using a dataset with SQL query and the available value set to NONE, so that the user could input. But the Default value does not refresh or change values.
I hope I have explained my question clearly. I would really appreciate any thoughts and comments.
Thanks,
Arunesh

Thank you much for your response.
I tried that and it did work. But my requirement is to have a user input the date. The basic idea is if the user decides on a predefined time range like Day Shift Today or Yesterday and so on... then the report would automatically calculate the values based on predefined date time values. On the other hand, if the intent is to run the report for an arbitrary period then the user supplies the date and time limits.
What I am trying to achieve is have the same parameter available for user input , but when the User decides he wants Predefined then the "textbox" populates with date and time as per his choice of predefind range.
I understand that by this the user can still overwrite the date and time on the text box, but the report will run the predefined values as long as he has the @PredefinedDateSelection Set to true.
Is there a way I can impement this?
Once again I thank you and appreciate your input.

Error 7 occurred at Get LV Class Default Value.vi only in my executable for Print Report - LV 2010 SP1

I have a program written which uses the print report function. Everything works fine in the uncompiled code, my report prints just fine. I can compile my project all the way to a full installer. When I run the executable I get the error:
Error 7 occurred at Get LV Class Default Value.vi
With the following text:
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
Complete call chain:
     Get LV Class Default Value.vi
     NI_report.lvclass:New Report.vi
     print report.vi
     EMS V3.0 streamline.vi
LabVIEW attempted to load the class at this path:
H:\InMotion\EMS\builds\EMS_01\Emissions Analyzer\EMS.exe\1abvi3w\vi.lib\Utility\NIReport.llb\Standard Report\NI_Standard Report.lvclass
"EMS V3.0 streamline.vi" is my main vi, "print report.vi" is the subvi that creates and prints the report based on all the information sent to it. I get no warning when I compile this to an executable. I already tried repairing both LV SP1 and the report generator toolkit. No change after I compile to an exe.
Any help would be appreciated. Thanks.
Garrett Herning

Ok, I tried that... and now I get an error when I try to compile to an executable... This is right at the end of the build and will not let me build an executable.
Error:
An error has occurred. Expand the Details section for more information.
Details:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 7 occurred at Invoke Node in AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
Method Name: Linker:Write Info To File

How to set a default value in a dropdownlistbox

Hi,
In CRM 2007 WEBUII have created a dropdownlistbox (ddlb) filled with currency codes.
Now I want the default value of the ddlb to be the currency of the country of the loggedin user, ie : 'EUR'
Anyone an creative idea how I can achieve this ?
In first place I need to know how I can set a default value of a ddlb.
--> ddlb type ref to CL_CRM_UIU_DDLB.
regards,
Abjuh

Hello Wolfgang,
If the method does not exist yet, you can create it in your enhanced (Z) context node.
Definition:
ATTRIBUTE_PATH Importing     Type                  STRING
ITERATOR          Importing           Type Ref To     IF_BOL_BO_COL_ITERATOR
VALUE                    Returning        Type                  STRING
Implementation:
method GET_BP_GROUP.
    DATA: current TYPE REF TO if_bol_bo_property_access.
    DATA: dref    TYPE REF TO data.
    if iterator is bound.
      current = iterator->get_current( ).
    else.
      current = collection_wrapper->get_current( ).
    endif.
TRY.
    TRY.
        dref = current->get_property( 'BP_GROUP' ). "#EC NOTEXT
      CATCH cx_crm_cic_parameter_error.
    ENDTRY.
    CATCH cx_sy_ref_is_initial cx_sy_move_cast_error
          cx_crm_genil_model_error.
      RETURN.
ENDTRY.
    IF dref IS NOT BOUND.
      value =''
      RETURN.
    ENDIF.
    TRY.
        value = if_bsp_model_util~convert_to_string( data_ref = dref
                                    attribute_path = attribute_path ).
      CATCH cx_bsp_conv_illegal_ref.
        FIELD-SYMBOLS: <l_data> type DATA.
        assign dref->* to <l_data>.
*       please implement here some BO specific handler coding
*       conversion of currency/quantity field failed caused by missing
*       unit relation
*       Coding sample:
*       provide currency, decimals, and reference type
*       value = cl_bsp_utility=>make_string(
*                          value = <l_data>
*                          reference_value = c_currency
*                          num_decimals = decimals
*                          reference_type = reference_type
        CONCATENATE <l_data> '-CURR/QUANT CONV FAILED-' INTO value
                    SEPARATED BY space.                 "#EC NOTEXT
      CATCH cx_root.
        value = '-CONVERSION FAILED-'.                  "#EC NOTEXT
    ENDTRY.
    if value is initial.
     value = 'Your default value'.
    endif.
endmethod.
Regards,
Fabian

Adding a Default value to the Filter in a Workbook

Hi,
I have created a workbook in BI 7.0. In the Filter, for a variable its displaying '#' as default value, but i want to display one of my variable values there.
I added this value in the 'Default values' tab of the variable in the Query Designer. After saving the query, i went to workbook, clicked on the Filter button, changed to design mode, clicked on the Filter pane, assigned the query as the Infoprovider& saved the workbook. But still i am getting the '#' in my Filter.
I closed the workbook, opened it again & refreshed it but still i couldnt see the variable i added. Am i missing any other thing? Please guide me. Thanks for your time.
Regards,
Murali

Hi,
adding a value as default value for a variable is only relevant for the selection screen.
If u want to define # in the navigation pane u can do that there and save the workbook.
Then # is saved as filter on workbook lvl, but its changeable by the user.
Hint: In analysis mode disable "initial query view on refresh" in dataprovider settings of the analysis grid.
Regards
Tobias
P.S. Giving points is the way to say thx in SDN!!!
Edited by: Tobias on Jun 6, 2008 7:50 AM

Inserting the default value for non existing date

hello,
i am designing a matrix report for payslip for month wise in oracle 6i report builder.
in that i want to display per day working hours of the month.
i m using following query for achieving my goal :
select a.paycode,b.empname,c.departmentname,to_char(a.dateoffice,'DD') dateoffice,a.shiftattended,round(decode(a.hw,0,a.mannual_hours,a.hw),0) hw,
a.ISMANNUAL,A.STATUS
from tbltimeregister1 a,
     tblemployee b,
      tbldepartment c
where a.paycode=b.paycode and
(a.hw >0 or a.mannual_hours is not null ) and
a.departmentcode='D05' AND
a.departmentcode=c.departmentcode and
a.dateoffice between to_date('01/12/2012','dd/mm/yyyy') and to_date('31/12/2012','dd/mm/yyyy')
ORDER BY A.PAYCODE,A.DATEOFFICEit is displaying the hours for the date in b/w date ranges exist in master table.
my problem is that if any date of a month is not in master data ,it should display the given date in DD format with 0 hours , A(absent) status, and null shift by default.
pl tell me how to modify my query for getting my desirable result.
Thanking You
Regards
Vishal Agrawal

965354 wrote:
hello,
select a.paycode,b.empname,c.departmentname,to_char(a.dateoffice,'DD') dateoffice,a.shiftattended,round(decode(a.hw,0,a.mannual_hours,a.hw),0) hw,
a.ISMANNUAL,A.STATUS
from tbltimeregister1 a,
tblemployee b,
      tbldepartment c
where a.paycode=b.paycode and
(a.hw >0 or a.mannual_hours is not null ) and
a.departmentcode='D05' AND
a.departmentcode=c.departmentcode and
a.dateoffice between to_date('01/12/2012','dd/mm/yyyy') and to_date('31/12/2012','dd/mm/yyyy')
ORDER BY A.PAYCODE,A.DATEOFFICEit is displaying the hours for the date in b/w date ranges exist in master table.
my problem is that if any date of a month is not in master data ,it should display the given date in DD format with 0 hours , A(absent) status, and null shift by default.
pl tell me how to modify my query for getting my desirable result.Your problem isn't exactly clear to me. How do you pass the dates to be compared to the DateOffice column? It will be better to ensure the Master table contain data for each date (with some default values) and you will not have to tweak your sql.
Below is a possible solution:
select *
from
select a.paycode,b.empname,c.departmentname,to_char(a.dateoffice,'DD') dateoffice,a.shiftattended,round(decode(a.hw,0,a.mannual_hours,a.hw),0) hw,
a.ISMANNUAL,A.STATUS
from tbltimeregister1 a,
     tblemployee b,
      tbldepartment c
where a.paycode=b.paycode and
(a.hw >0 or a.mannual_hours is not null ) and
a.departmentcode='D05' AND
a.departmentcode=c.departmentcode and
a.dateoffice between to_date('01/12/2012','dd/mm/yyyy') and to_date('31/12/2012','dd/mm/yyyy')
union
select a.paycode,b.empname,c.departmentname,to_char(&date_variable,'DD') dateoffice,null,round(decode(a.hw,0,a.mannual_hours,a.hw),0) hw,
a.ISMANNUAL,'A'
from tbltimeregister1 a,
     tblemployee b,
      tbldepartment c
where a.paycode=b.paycode and
(a.hw >0 or a.mannual_hours is not null ) and
a.departmentcode='D05' AND
a.departmentcode=c.departmentcode and
ORDER BY A.PAYCODE,A.DATEOFFICEIf this is not what you are looking for, then
1. Post a script that helps us to create the Tables required in your query
2. Some sample data. That includes the data for master table that has missing dates (4-5 rows should suffice)
3. The expected results from the sample data you posted.
Please do not forget to mention your version:
select * from v$version;

Can't Set Default Value for LOV Presentation DB Column

I have a simple form. One of the fields is populated using a named, dynamic LOV with the following source query:
SELECT USER_NAME DISPLAY_VALUE, USER_ID RETURN_VALUE
FROM USER_ACCT
ORDER BY 1
I want the default user to be public, which is one of the possible values returned by the above query. However, I just can't find a good way to do this.
If I put the following query in the Default section, nothing happens.
SELECT USER_ID
FROM USER_ACCT
WHERE USER_NAME = 'PUBLIC'
If I look up the ID and statically put the value in the Default, it works (This isn't acceptable . From environment to environment the value will differ)
If I put the SQL in an after footer page process, it sets the value correctly in the session but, does not update the display.
If I try to put it in the Post Calculation Computation section, it merely produces an error.
I'm sure that I am missing something simple but, I have not spent an hour and half on this.
Someone please help!
-Joe

A function I'd like to see is the ability to not only create a select list dynamically, but also set the default value of that select list's item to the first (or Nth?) value on that list. This could be specified in the builder by an item option.
E.G., if a select list LOV returns three values: "foo", "bar", "baz", go ahead and set the value of the select list item to "foo".
As far as I've been able to discover, there's no built-in way to do this in Application Express. I've looked through the app, the docs, and the forum. If such a method does exist, please let me know.
Otherwise, we end up running additional processes that reissue the query so we can grab the first item as the default value. This seems inefficient to me.
Keeping the LOV query and the "first item" query consistent can present problems as well. We usually end up pushing the LOV query into a function so it can be maintained in a single location, but this seems more like a workaround than anything else.
While the query is probably cached, Application Express has that return value already, right? Why calculate/choose it again?

User defined function to set a default value of a column

Hi All
Can we use user defined function to set a default value of a column ??
for example:
create or replace function test1 return number is
begin
return 10;
end;
create table testt
(id as test1,
name varchar2(20));
error:
ORA-02000: missing ( keywordThanks
Ashwani

174313 wrote:
MichaelS for showing example to use function in table ddl , otherwise i was thinking we cannot use function in table ddl as per error I received.That was an example of a virtual column.
ORA-04044: procedure, function, package, or type is not allowed hereUsing PL/SQL code like that raises 2 basic problems. If that PL/SQL code for the calculating the column default breaks, what happens to the SQL insert statements against that table. These will need to fail as the table definition depends on the PL/SQL code. This is problematic as this dependency simply increases the complexity of the SQL object.
The 2nd issue is performance. PL/SQL code needs to be executed by the PL/SQL engine. This means a context switch from the SQL engine to the PL/SQL engine in order to determine the default value for that column. Context switching is a performance overhead.
So even if it was possible to use a PL/SQL function as parameter for the SQL default clause, I would not be that keen to use it.

Default values for

Hi,
I am trying to load a datafile to a table using SQL*loader, how can I assign the default values for a coulmn in control file of sql loader, here are datafile and target table i am using
datafile
empid,empname,empdept
1001,clark,123
1002,Mike,123
1003,john,123
1004,bryan,123
desc emp_table
empid number(10)
empname varchar2(30)
empjob varchar2(20)
empdept number(10)
empmgr number(10)
The datafile has the data for only 3 columns in emp_table, there is no data for empjob and empmgr in the datafile.I would like to use default values for them empjob = sales and empmgr = 2001, so how can I set these default values in the control file.
Thanks in advance!!

The simplest way is to forget about passing default values in control file. Create table just for this load with DEFAULT constraint for missing columns and load file in this newly created table. Let's call it LDR_TBL. Then "INSERT INTO EMP_TBL SELECT * FROM LDR_TBL; " Make sure you define control file as follows (skipping empjob and empmgr). Oracle will populate "empjob, empmgr" with 'sales',2001 as part of column constraint.
load data
infile 'x.txt'
into table emp_table
fields terminated by ',' optionally enclosed by '"'
(empid,empname,empdept)
When all is done, DROP TABLE LDR_TBL ;
Does this help ?

Invoice Forms created with Adobe X - default value for "total" column should be blank

I am new to the forum and just finding my way around. Thank you for any help.
I've created an invoice template in Word, then imported it into Adobe X Pro to turn it into a form. Pretty simple, but one thing is troubling me. I have the usual description, quantity, price each, and total columns. The "total" columns are defaulting with a "0" in them, and I'd prefer they default blank unless an entry is made on that line. I have right-clicked the "total" fields properties and the default values are blank already, but a zero still shows up. I know it can be done because one of my earlier forms defaults to a blank space until I entered something on that line. Then it calculated. How can I make the "total" column blank unless something is entered there?
Secondly, when I save a form and want to go back to make changes, I'm not seeing how to do this. It seems to save as a .pdf, and if I want to modify the form portion I have to start all over from scratch. What am I missing?
Thanks so much for any help.

George, thank you for the response.
I've entered the script, and no change. The "total" columns still show a (zero) 0 even when I have not entered anything in that line.
For example:
Description             Qty     Unit Price     Total
                                                                         0
                                                                         0
                                                                         0
etc... all the day down the form.
I'd like the zeroes not to appear when there is nothing on the Description lines.
Incidentally, when selecting fields to use for calculations for the "total" column, we're supposed to place a check mark in the box of the fields to be calculated - and I can't CLICK in them. I have to use the space bar. Is that how it is supposed to work?
Thanks for your quick response.
J
I

Property default value in presentation doesn't work in vSphere Web Client.

Hi,
Some of my default values don't work in the vSphere Web client.
Here is an example :
The user need to choose a date, this input parametter is called "FormDateRealisation".
In the next step, I have a user interraction with external input called "AppDateRealisation", that is an attribute. In the presentation, this parameter as a Default value property set to "#FormDateRealisation".
It work perfectly in the Java client, but when I try the workflow in vSphere web client, the default value doesn't not work.
Does anyone have an idea how to solve this ? I already found a solution to bypass this bug (Creating a script to transfert the input to the attribute)... But I would like to use the default value.

Hi,
I opened a ticket, they didn,t found the solution. But we found those logs:
Execution of action com.DemandeServeur/EspaceDisqueMultiple10 returned a javacsript 'undefined' value. Perhaps a return statement is missing in this action ? Will be converted to null.
Here is my code of "EspaceDisqueMultiple10":
Return type: string
Input: InGBHD (number)
if (InGBHD%10 != 0)
return "L'espace disque doit être un multiple de 10";
else
return;

Calling a user defined function as default value for a column

Hi All
Can we call a user defined function as default value for a column ??
for example:
create or replace function test1 return number is
begin
return 10;
end;
create table testt
(id as test1,
name varchar2(20));
getting error:
Error at line 1
ORA-02000: missing ( keywordThanks
Ashwani
Edited by: Ashwani on Jan 16, 2012 1:19 AM

Hi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Database » SQL and PL/SQL which you can get more quick response
Regard
Helios

Default values not showing up in CAT2

Hi Guys,
Using tcode CAC1 I have configure to show the default values of Cost Center and Activity type from IT0315. But for some reason I cannot see the default values in CAT2 for any of the PERNR.
Please let me know what else I am missing.
Thanks a lot.
mini

Hello,
Make sure you mark the items you want on Defaults inside CAC1 t-code.
You have the following options and from where are they taken of:
- Controlling area -> from IT0001
- Activity type -> from IT0315
- Purchase order -> from IT0315
- Attendance/Absence type -> directly entered in CAC1
- Master cost center -> from IT0000
- Sender business process -> from IT0315
- Service master -> from IT0315
- Cost center -> from IT0315
- Wage type -> directly entered in CAC1
Regards,
Bentow.

TestStand - Default Values 82.llb missing

Similar Messages

Maybe you are looking for