Text catagory - Text item (TATX) in sales order

In Sales order, we generaly use item catagory - TAN (standard item) or TANN (free of charge).
- When should we use the item catagory - TATX (text item)?
- Should we maintin the material master for text items?
- Also please provide exaple of Text items?
Thank you very much.
Ashish
Edited by: Ashish Desai on Feb 9, 2009 1:47 PM

Hi Desai
suppose if we are selling a TV then the TV manual also has to go the customer that is text item TATX
In the item category determination in VOV4 for the sales doc type OR+item category group maintained as blank usage is TEXT item category of the highel level item nil For this combination the default item category would be TATX
That means thro usage program TEXT(ABAP program) system determines it is a text item and gives item category as tatx
The example of text item is TV manual
Generally for TEXT items we dont maintain MMR's but again this is business requirement only
If some business cases if it is reqd we can maintain MMR's for text items with a special material type and without any qty or value updation
Regards
Raja

Similar Messages

Sending Alter Text by mail automaticlly on item level of Sales order.

There is a 'Alter Text ' listed on the tabpage 'Texts' at item level in Sales order.
I want to send content of 'Alter Text ' by mail automaticly as end user change the text .
How to implement this requirement?
Thanks

Hi,
U can add the field in sales order header (Additional Data B tab). pgm name = SAPMV45A screen no: 8309.
Regards
Sathis

Text on Third Party Sales Order to PO

We have a thrid party sales order that creates a purchase requistion then PO. If line item text is added at time of order creation it will transfer to the purchase requistion then the PO. However if you add line item text when changing the sales order, it does not get transferred to the PO. We have determined that this can not be configured after reviewing with SAP.
One of the recommedations was to use: user exit EXIT_SAPMM06E and BAdi ME_PROCESS_PO_CUST
This does not appear to work because it is invoked on the PO and not the sales order.
We have tried a different approach by looking at user exits on the sales orders like: V45E0001, but itt does not appear to be accessed when we look at it in debug.
Does, any one have further suggestions. Should be looking at user exits on the purchase requisiton. Has anyone had this issue before.
Thanks in advance,
Mark

When you change the text in a third party sales order, the text will be transported to the Purchase Requisition. This updates in the Purchase Requisition because third party Purchase Requisitions are changeable by the sales order. However, this does not apply to the Purchase order.
Hope this helps.
Gerard

Text Item - TATX

Hi Team,
I was checking the item category configuration of Text Item (TATX) in [VOV7]. Under the Business Data Tab the Billing Relevance field has value 'A' - delivery related billing and the Pricing field has value 'No Pricing'. What does this combination mean? If the item has no pricing then why is it relevant for billing.
I have searched this forum with Text Item as the search key, however, didnt find sufficient answers. Would appreciate any help.
Regards
Nadarajah Pratheb

hi
TATX has ''relevant for billing A- delivery related billing '' bcoz text item should be reflected in the bill as an item. however since it is a text item it will not be charged to the customer. for example, when u buy a refridgerator, you get the user manual which is a text item, which is not billed. but your fridge is rather billed fully.
so inorder to show this text item in the invoice it has 'A' in the item category.
and since it is not charged to the customer there is no pricing maitained.
hoep this wil help u.
suresh

Header text is different from Sales order to dElivery

Hi all,
Can you please help me regarding this?
I have created a delivery with different sold-to and ship-to. And then, I entered the text manually. But when created a delivery, different text appears. How can this be?
I have checked the determination, it seems behaving ok but why it has gotten a different text. I have checked the sales text of the ship-to party, it has no text maintained.
Please help.

Hello Rumar
I guess you entered the text manually in the sales order. The Ship-to may not be having any text, but the Sold-to may be and it may be coming from sold to.
In transaction VOTXN, check the access sequence for the text type id and see which one takes precedence - one from customer master or from the order by checking the order of accesses.

Problem in uploading multiple line items while Creating sales order by BAPI

Hi experts , Im able to create sales order with one item while using this program, but the problem is when iam having multiple items or multiple sales order , iam not able to createthe line items , though its creating sales order header , Iam copy pasting my code , please add the additional code to my code to take more than 1 line items ,This is urgent requirement . Points will be rewarded for answers , Thanks in advance
*& Report Z_SO_CREATE_BAPI
REPORT Z_SO_CREATE_BAPI.
DATA: i_header TYPE bapisdhd1 occurs 0 with header line.
DATA: i_details TYPE bapisditm OCCURS 0 WITH HEADER LINE.
DATA: i_partner TYPE bapiparnr OCCURS 0 WITH HEADER LINE.
DATA: i_return1 TYPE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: i_return2 TYPE bapiret2.
data : ORDER_HEADER_IN like BAPISDHD1.
data : ORDER_ITEMS_IN like BAPISDITM occurs 0 with HEADER LINE .
data : ORDER_ITEMS_INX Like BAPISDITMX occurs 0 with HEADER LINE .
data : RETURN like BAPIRET2 occurs 0 with header line.
data : ORDER_PARTNERS like BAPIPARNR occurs 0 with
header line.
DATA : ORDER_KEYS LIKE BAPISDKEY OCCURS 0 WITH HEADER
LiNE.
data : ORDER_SCHEDULES_IN like BAPISCHDL occurs 0 with
header line.
data : ORDER_SCHEDULES_INX like BAPISCHDLX occurs 0 with
header line.
data : BEGIN OF TAB OCCURS 0,
       SRNO(4),
        DOC_TYPE like ORDER_HEADER_IN-dOC_TYPE,
        SALES_ORG LIKE ORDER_HEADER_IN-SALES_ORG,
        DISTR_CHAN LIKE ORDER_HEADER_IN-DISTR_CHAN,
        DIVISION like ORDER_HEADER_IN-DIVISION,
       REQ_DATE_H(10),
       PURCH_DATE(10),
       PMNTTRMS LIKE ORDER_HEADER_IN-PMNTTRMS,
       PURCH_NO_C LIKE ORDER_HEADER_IN-PURCH_NO_C,
       ITM_NUMBER like BAPISDITM-ITM_NUMBER,
        MATERIAL   LIKE ORDER_ITEMS_IN-MATERIAL ,
        PLANT LIKE ORDER_ITEMS_IN-PLANT,
       TARGET_QTY LIKE ORDER_ITEMS_IN-TARGET_QTY,
       ITM_NUMBERX like ORDER_ITEMS_INX-ITM_NUMBER ,
       MATERIALX   LIKE ORDER_ITEMS_INX-MATERIAL ,
       CUST_MAT22 LIKE ORDER_ITEMS_IN-CUST_MAT22,
       PLANTX LIKE ORDER_ITEMS_INX-PLANT,
       TARGET_QTYX LIKE ORDER_ITEMS_INX-TARGET_QTY,
       ITM_NUMBER LIKE ORDER_ITEMS_IN-ITM_NUMBER,
       MATERIAL   LIKE ORDER_ITEMS_IN-MATERIAL ,
        PARTN_ROLE LIKE ORDER_PARTNERS-PARTN_ROLE,
        PARTN_NUMB LIKE ORDER_PARTNERS-PARTN_NUMB,
      END OF TAB.
DATA: v_vbeln TYPE bapivbeln-vbeln.
selection-screen begin of block b1 with frame.
skip 3.
parameter:p_infile like rlgrap-filename obligatory.
skip 3.
selection-screen end of block b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_infile.
PERFORM value_help.
start-of-selection.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
    filename                     = p_infile
   FILETYPE                      = 'DAT'
HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
tables
    data_tab                      = tab.
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
**Validation for the Create SO screen
*AT SELECTION-SCREEN ON BLOCK na_create.
Loop at Tab.
i_header-doc_type = TAB-DOC_TYPE .
i_header-sales_org = TAB-SALES_ORG.
i_header-distr_chan = TAB-DISTR_CHAN .
i_header-division = TAB-DIVISION .
append i_header.
*endloop.
i_partner-partn_role = TAB-PARTN_ROLE .
i_partner-partn_numb = TAB-PARTN_NUMB.
APPEND i_partner.
i_details-material = TAB-MATERIAL .
APPEND i_details.
endloop.
*Bapi for Creating SO
               CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
                 EXPORTING
                 SALESDOCUMENTIN               = v_vbeln
                   order_header_in               = i_header
                 ORDER_HEADER_INX              =
                 SENDER                        =
                 BINARY_RELATIONSHIPTYPE       =
                 INT_NUMBER_ASSIGNMENT         =
                 BEHAVE_WHEN_ERROR             =
                 LOGIC_SWITCH                  =
                 TESTRUN                       =
                 CONVERT                       = ' '
                IMPORTING
                  SALESDOCUMENT                 = v_vbeln
                 tables
                  RETURN                        = i_return1
                  ORDER_ITEMS_IN                = i_details
                  ORDER_ITEMS_INX               = ORDER_ITEMS_INX
                   order_partners                = i_partner .
                 ORDER_SCHEDULES_IN            =
                 ORDER_SCHEDULES_INX           =
                 ORDER_CONDITIONS_IN           =
                 ORDER_CONDITIONS_INX          =
                 ORDER_CFGS_REF                =
                 ORDER_CFGS_INST               =
                 ORDER_CFGS_PART_OF            =
                 ORDER_CFGS_VALUE              =
                 ORDER_CFGS_BLOB               =
                 ORDER_CFGS_VK                 =
                 ORDER_CFGS_REFINST            =
                 ORDER_CCARD                   =
                 ORDER_TEXT                    =
                 ORDER_KEYS                    =
                 EXTENSIONIN                   =
                 PARTNERADDRESSES              =
IF NOT v_vbeln IS INITIAL.
*Bapi Commit Work
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT =
IMPORTING
return = i_return2
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
IMPORTING
RETURN =
ENDIF.
LOOP AT i_return1 . "INTO wa_return1.
WRITE:/ i_return1-message.
ENDLOOP.
FORM value_help .
CALL FUNCTION 'DSVAS_DOC_WS_FILENAME_GET_50'
    EXPORTING
      DEF_FILENAME     = ' '
      DEF_PATH         = ' '
      MASK             = ',.,..'
      MODE             = 'O'
      TITLE            = ' '
    IMPORTING
      FILENAME         = p_infile
    EXCEPTIONS
      INV_WINSYS       = 1
      NO_BATCH         = 2
      SELECTION_CANCEL = 3
      SELECTION_ERROR = 4
      OTHERS           = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
txt file data
order type salesorg   distch      divison       materialno                  parter role
TA     PB01     01     00     000000000000000852     WE
Partner no
8101000000

Hi Neerja,
you can reffer this sample code. It may not be complet soluation for your poblem,
but you will get some idea.
*& Report ZBAPI_SALESORDER_CREATE
*& Author : Karthik
REPORT ZBAPI_SALESORDER_CREATE.
data : ORDER_HEADER_IN like BAPISDHD1.
data : ORDER_ITEMS_IN like BAPISDITM occurs 0 with
header line.
data : RETURN like BAPIRET2 occurs 0 with header line.
data : ORDER_PARTNERS like BAPIPARNR occurs 0 with
header line.
DATA : ORDER_KEYS LIKE BAPISDKEY OCCURS 0 WITH HEADER
LINE.
data : ORDER_SCHEDULES_IN like BAPISCHDL occurs 0 with
header line.
data : BEGIN OF TAB OCCURS 0,
        SRNO(4),
        DOC_TYPE like ORDER_HEADER_IN-dOC_TYPE,
        SALES_ORG LIKE ORDER_HEADER_IN-SALES_ORG,
        DISTR_CHAN LIKE ORDER_HEADER_IN-DISTR_CHAN,
        DIVISION like ORDER_HEADER_IN-DIVISION,
       REQ_DATE_H(10),
        PURCH_DATE(10),
        PMNTTRMS LIKE ORDER_HEADER_IN-PMNTTRMS,
        PURCH_NO_C LIKE ORDER_HEADER_IN-PURCH_NO_C,
        ITM_NUMBER like BAPISDITM-ITM_NUMBER,
        CUST_MAT22 LIKE ORDER_ITEMS_IN-CUST_MAT22,
        PLANT LIKE ORDER_ITEMS_IN-PLANT,
        TARGET_QTY LIKE ORDER_ITEMS_IN-TARGET_QTY,
        PARTN_ROLE LIKE ORDER_PARTNERS-PARTN_ROLE,
        PARTN_NUMB LIKE ORDER_PARTNERS-PARTN_NUMB,
      END OF TAB.
data: itab1 like alsmex_tabline occurs 0 with header
line.
DATA: gd_currentrow type i.
data : PURCHASEORDER like ekko-ebeln.
Data: tot_rec type i,     "Total Records
     gd_update type i,   "Main Table Increement Counter
     gd_lines type i,    "Success Table increement Counter
     w_textout like t100-text. "VARIABLE TO GET ERRORLOG
data : begin of it_success occurs 0,
        SALESDOCUMENT LIKE BAPIVBELN-VBELN, "PROJECT
      end of it_success.
data : begin of it_error occurs 0,
        srno(4),
        err_msg(73) TYPE c,    "TO RETREIVE ERROR MESSAGES
     end of it_error.
data : srno(4).
DATA : SALESDOCUMENT LIKE BAPIVBELN-VBELN.
selection-screen begin of block b1 with frame.
skip 3.
parameter:p_infile like rlgrap-filename obligatory.
skip 3.
selection-screen end of block b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_infile.
PERFORM value_help.
start-of-selection.
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      filename                = p_infile
      i_begin_col             = '1'
      i_begin_row             = '2' "Do not require
headings
      i_end_col               = '22'
      i_end_row               = '10000'
    TABLES
      intern                  = itab1
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      others                  = 3.
if sy-subrc <> 0.
    message e010(zz) with text-001. "Problem uploading
Excel Spreadsheet
endif.
*perform open_group.
sort itab1 by row col.
Get first row retrieved
read table itab1 index 1.
Set first row retrieved to current row
gd_currentrow = itab1-row.
loop at itab1.
Reset values for next row
    if itab1-row ne gd_currentrow.
      append tab .
      clear tab.
      gd_currentrow = itab1-row.
    endif.
    SHIFT ITAB1-VALUE LEFT DELETING LEADING SPACE.
    case itab1-col.
      when '0001'.
        TAB-SRNO = itab1-value.
      when '0002'.
        TAB-DOC_TYPE = itab1-value.
      when '0003'.
        TAB-SALES_ORG = itab1-value.
      when '0004'.
        TAB-DISTR_CHAN = itab1-value.
      when '0005'.
        TAB-DIVISION = itab1-value.
     when '0006'.
       TAB-REQ_DATE_H = itab1-value.
      when '0006'.
        TAB-PURCH_DATE = itab1-value.
      when '0007'.
        TAB-PMNTTRMS = itab1-value.
      when '0008'.
        TAB-PURCH_NO_C = itab1-value.
        when '0009'.
        TAB-ITM_NUMBER = itab1-value.
       when '0010'.
        TAB-CUST_MAT22 = itab1-value.
      when '0011'.
        TAB-PLANT = itab1-value.
      when '0012'.
        TAB-TARGET_QTY = itab1-value.
      when '0013'.
        TAB-PARTN_ROLE = itab1-value.
      when '0014'.
        TAB-PARTN_NUMB = itab1-value.
    endcase.
endloop.
append tab.
clear tab.
sort tab by SRNO.
LOOP AT TAB.
   concatenate tab-REQ_DATE_H+4(4)
tab-REQ_DATE_H2(2) tab-REQ_DATE_H0(2) into
tab-REQ_DATE_H.
    concatenate tab-PURCH_DATE+4(4)
tab-PURCH_DATE2(2) tab-PURCH_DATE0(2) into
tab-PURCH_DATE.
    SRNO = TAB-SRNO.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT = tab-PARTN_NUMB
      IMPORTING
        OUTPUT = tab-PARTN_NUMB.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT = tab-CUST_MAT22
      IMPORTING
        OUTPUT = tab-CUST_MAT22.
    IF TAB-SRNO = SRNO.
      ORDER_HEADER_IN-DOC_TYPE = TAB-DOC_TYPE.
      ORDER_HEADER_IN-SALES_ORG = TAB-SALES_ORG.
      ORDER_HEADER_IN-DISTR_CHAN = TAB-DISTR_CHAN.
     ORDER_HEADER_IN-REQ_DATE_H = TAB-REQ_DATE_H.
      ORDER_HEADER_IN-PURCH_DATE = TAB-PURCH_DATE.
      ORDER_HEADER_IN-PMNTTRMS = TAB-PMNTTRMS.
      ORDER_HEADER_IN-PURCH_NO_C = TAB-PURCH_NO_C.
      ORDER_HEADER_IN-DIVISION = tab-DIVISION.
      ORDER_ITEMS_IN-ITM_NUMBER = tab-ITM_NUMBER.
      ORDER_ITEMS_IN-material = TAB-CUST_MAT22.
      ORDER_ITEMS_IN-PLANT      = TAB-PLANT.
      APPEND ORDER_ITEMS_IN.
      ORDER_PARTNERS-PARTN_ROLE = TAB-PARTN_ROLE.
      ORDER_PARTNERS-PARTN_NUMB = TAB-PARTN_NUMB.
      APPEND ORDER_PARTNERS.
      ORDER_SCHEDULES_IN-ITM_NUMBER = tab-ITM_NUMBER.
      ORDER_SCHEDULES_IN-REQ_QTY = tab-TARGET_QTY.
      append ORDER_SCHEDULES_IN.
    ENDIF.
    AT END OF SRNO.
      CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
        EXPORTING
           SALESDOCUMENTIN               =
             ORDER_HEADER_IN               = ORDER_HEADER_IN
           ORDER_HEADER_INX              =
           SENDER                        =
           BINARY_RELATIONSHIPTYPE       =
           INT_NUMBER_ASSIGNMENT         =
           BEHAVE_WHEN_ERROR             =
           LOGIC_SWITCH                  =
           TESTRUN                       =
           CONVERT                       = ' '
       IMPORTING
         SALESDOCUMENT                 = SALESDOCUMENT
        TABLES
         RETURN                        = RETURN
             ORDER_ITEMS_IN                = ORDER_ITEMS_IN
           ORDER_ITEMS_INX               =
             ORDER_PARTNERS                = ORDER_PARTNERS
             ORDER_SCHEDULES_IN            = ORDER_SCHEDULES_IN
           ORDER_SCHEDULES_INX           =
           ORDER_CONDITIONS_IN           =
           ORDER_CONDITIONS_INX          =
           ORDER_CFGS_REF                =
           ORDER_CFGS_INST               =
           ORDER_CFGS_PART_OF            =
           ORDER_CFGS_VALUE              =
           ORDER_CFGS_BLOB               =
           ORDER_CFGS_VK                 =
           ORDER_CFGS_REFINST            =
           ORDER_CCARD                   =
           ORDER_TEXT                    =
         ORDER_KEYS                    = ORDER_KEYS
           EXTENSIONIN                   =
           PARTNERADDRESSES              =
      IF SALESDOCUMENT <> SPACE.
        commit work.
        ADD 1 TO gd_update.
        it_success-SALESDOCUMENT = SALESDOCUMENT.
        append it_success.
        CLEAR :SALESDOCUMENT,ORDER_HEADER_IN.
        REFRESH : RETURN,ORDER_ITEMS_IN,ORDER_PARTNERS.
      ELSE.
        loop at return.
          it_error-SRNO = tab-SRNO.
          it_error-err_msg = return-MESSAGE .
          Append it_error.
        ENDLOOP.
        CLEAR :SALESDOCUMENT,ORDER_HEADER_IN.
        REFRESH : RETURN,ORDER_ITEMS_IN,ORDER_PARTNERS.
      ENDIF.
    endat.
endloop.
DESCRIBE TABLE it_success LINES gd_lines.
IF gd_lines GT 0.
    Display result report column headings
    PERFORM display_column_headings.
    Display result report
    PERFORM DISPLAY_SUCESS.
ENDIF.
IF SUCESS FAILS Display Error Report
DESCRIBE TABLE it_error LINES gd_lines.
IF gd_lines GT 0.
    PERFORM errorheadings.
    PERFORM errorreport.
ENDIF.
*&      Form display_column_headings
      text
FORM display_column_headings.
WRITE:2 ' Success Report '(014) COLOR COL_POSITIVE.
SKIP.
WRITE:2 'The following records inserted
successfully:'(013).
WRITE:/ sy-uline(15).
FORMAT COLOR COL_HEADING.
WRITE:/      sy-vline,
           (10) 'Sales order'(004), sy-vline.
WRITE:/ sy-uline(15).
ENDFORM.                    "display_column_headings
*Subroutine to display SUCESS REPORT
FORM DISPLAY_SUCESS.
FORMAT COLOR COL_NORMAL.
LOOP AT it_success.
    WRITE:/      sy-vline,
        (10) it_success-SALESDOCUMENT, sy-vline.
    CLEAR it_success.
ENDLOOP.
WRITE:/ sy-uline(15).
REFRESH: it_success.
FORMAT COLOR COL_BACKGROUND.
ENDFORM.                               "
DISPLAY_REPORT
*&      Form errorreport
      text
FORM errorreport.
LOOP AT it_error.
    WRITE:/      sy-vline,
            (10) it_error-SRNO, sy-vline,
             (40) it_error-err_msg, sy-vline.
ENDLOOP.
WRITE:/ sy-uline(104).
REFRESH: it_error.
endform.                    "errorreport
*&      Form ERRORHEADINGS
      text
FORM ERRORHEADINGS.
SKIP.
WRITE:2 ' Error Report '(007) COLOR COL_NEGATIVE.
SKIP.
WRITE:2 'The following records failed during
update:'(008).
WRITE:/ sy-uline(104).
FORMAT COLOR COL_HEADING.
WRITE:/      sy-vline,
          (10) 'ERROR.'(009), sy-vline.
WRITE:/ sy-uline(104).
FORMAT COLOR COL_NORMAL.
ENDFORM.                    "ERRORHEADINGS
**&      Form value_help
      text
--> p1        text
<-- p2        text
FORM value_help .
CALL FUNCTION 'DSVAS_DOC_WS_FILENAME_GET_50'
    EXPORTING
      DEF_FILENAME     = ' '
      DEF_PATH         = ' '
      MASK             = ',.,..'
      MODE             = 'O'
      TITLE            = ' '
    IMPORTING
      FILENAME         = p_infile
    EXCEPTIONS
      INV_WINSYS       = 1
      NO_BATCH         = 2
      SELECTION_CANCEL = 3
      SELECTION_ERROR = 4
      OTHERS           = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    "value_help
Regards,
Amit.

Set item categaries of sales order is not relevant for picking

dear friends:
when i created the outbound delivery and must maintain the picking quantity of materails.i change the configration of system so that not nessesary maintain the picking quantity. set item categaries of sales order is not relevant for picking via t_code:vlop,what it effect .help me analyze it .
best regards.

Hello,
In TA :OVLP set/reset the indicator according to your requirement.
In the case of outbound deliveries, only the delivery items that are relevant for picking are transferred to the Warehouse Management (WM) component. Certain items such as text items or service items (consulting activities) are not relevant for picking.(in those cases uncheck the box)
In the case of inbound deliveries, this indicator controls whether the item is relevant for putaway.
This indicator must be set in order for the item to be included in a Warehouse Management transfer order and then put away.
Regards,
Nisha
@award pts if helpful.

How to control Changing of item category in sales order Manually

Hello Gurus,
How to restrict manual changing of item category in sales order?
Reason for it:
When ever they want to give some free goods to customer , they are changing Item category in Standard Sales order at item level then deliverying free goods to customer
looking for your inputs
Thanks in advance
Regards
Venkat

Hello,
There are two possible ways:
1. In Item Caterogy Determination remove the Manual Item Categories so that system will determine the Item Category only from defined options.
2. Use T-SHDO - create Screen Variant & make the item Category Feild as Display only.
Hope this helps..
Thanks,
Jignesh Mehta

Production Order and Internal Order for each item of the sales order

Hi
   I am developing Make To Order Report where I have to display the MTO Line Items and non MTO Line Items. For non MTO Line Items I have to display Internal order with Planned and Actual Costs and also Production Order with Planned and Actual Costs. Could anybody tell how to get the Internal order no and production order with Planned and Actual costs for each line item for a sales order.
Thanks
Naga

Hi,
You can get the Production orders, Planned orders, Internal orders generated for Sales order item from AFPO table (use fields KDAUF-Sales order number & KDPOS-Sales order item). Then to identify the order type use order category (AUTYP) from table AUFK.
Once you have the Production/internal order, you can ge the cost from COSS and COSP table. Use the object number from AUFK to get the cost entries from COSS & COSP.
You can use the following sample code as reference.
Hope this is helps.. (Don't forget to mark it... )
Form GET_COSTS                                                       *
Get the material cost, labour hours and the labour cost for the      *
sales order material.                                                *
There are no interface parameters to be passed to this subroutine.   *
FORM GET_COSTS.
DATA V_OBJNR LIKE AUFK-OBJNR.
DATA v_menge LIKE vbap-kwmeng.
SELECT SINGLE OBJNR
    INTO V_OBJNR
    FROM AUFK
   WHERE AUFNR EQ AFPO-AUFNR.
SELECT * FROM COSS
   WHERE OBJNR EQ V_OBJNR
     AND WRTTP IN ('01', '04'). " p_wrttp. "Labour Cost ( Plan, Actual)
    PERFORM GET_VALUES_FROM_COSS.
ENDSELECT.
SELECT * FROM COSP
   WHERE OBJNR EQ V_OBJNR
     AND WRTTP IN ('01', '04')         " p_wrttp
     AND KSTAR NE '0000510033'. " EQ p_kstar2.      "Material Cost
    PERFORM GET_VALUE_FROM_COSP.
ENDSELECT.
Get the unit cost of the production order by dividing the production
cost by the order quantity. The result will be multiplied by the
GL posting qunatity (Delivery quantity) to get the production cost
for the quantity being deluivered.
IF NOT AFPO-PSMNG IS INITIAL.
    OUT_REC-LABOUR_HOURS_ACT = OUT_REC-LABOUR_HOURS_ACT / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_HOURS_ACT =
                      OUT_REC-ADDNL_LABOUR_HOURS_ACT / AFPO-PSMNG.
    OUT_REC-LABOUR_HOURS_PLN = OUT_REC-LABOUR_HOURS_PLN / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_HOURS_PLN =
                     OUT_REC-ADDNL_LABOUR_HOURS_PLN / AFPO-PSMNG.
    OUT_REC-LABOUR_COST_ACT = OUT_REC-LABOUR_COST_ACT / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_COST_ACT =
                     OUT_REC-ADDNL_LABOUR_COST_ACT / AFPO-PSMNG.
    OUT_REC-LABOUR_COST_PLN = OUT_REC-LABOUR_COST_PLN / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_COST_PLN =
                     OUT_REC-ADDNL_LABOUR_COST_PLN / AFPO-PSMNG.
    OUT_REC-MATERIAL_COST_ACT = OUT_REC-MATERIAL_COST_ACT / AFPO-PSMNG.
    OUT_REC-ADDNL_MATERIAL_COST_ACT =
                     OUT_REC-ADDNL_MATERIAL_COST_ACT / AFPO-PSMNG.
    OUT_REC-MATERIAL_COST_PLN = OUT_REC-MATERIAL_COST_PLN / AFPO-PSMNG.
    OUT_REC-ADDNL_MATERIAL_COST_PLN =
                     OUT_REC-ADDNL_MATERIAL_COST_PLN / AFPO-PSMNG.
ENDIF.
Multiply the calculated Unit Production costs with the GL quantity to
get the actual production cost of the quantity delivered.
Calculation for Labour Hours
OUT_REC-LABOUR_HOURS_ACT = OUT_REC-LABOUR_HOURS_ACT *
                             OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_HOURS_ACT = OUT_REC-ADDNL_LABOUR_HOURS_ACT *
                             OUT_REC-QUANTITY.
OUT_REC-LABOUR_HOURS_PLN = OUT_REC-LABOUR_HOURS_PLN *
                             OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_HOURS_PLN = OUT_REC-ADDNL_LABOUR_HOURS_PLN *
                             OUT_REC-QUANTITY.
Calculation for Material Cost
OUT_REC-MATERIAL_COST_ACT = OUT_REC-MATERIAL_COST_ACT *
                              OUT_REC-QUANTITY.
OUT_REC-ADDNL_MATERIAL_COST_ACT =
      OUT_REC-ADDNL_MATERIAL_COST_ACT * OUT_REC-QUANTITY.
OUT_REC-MATERIAL_COST_PLN = OUT_REC-MATERIAL_COST_PLN *
                              OUT_REC-QUANTITY.
OUT_REC-ADDNL_MATERIAL_COST_PLN =
      OUT_REC-ADDNL_MATERIAL_COST_PLN * OUT_REC-QUANTITY.
Calculation for Labour cost
OUT_REC-LABOUR_COST_ACT   = OUT_REC-LABOUR_COST_ACT *
                               OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_COST_ACT = OUT_REC-ADDNL_LABOUR_COST_ACT *
                              OUT_REC-QUANTITY.
OUT_REC-LABOUR_COST_PLN   = OUT_REC-LABOUR_COST_PLN *
                              OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_COST_PLN = OUT_REC-ADDNL_LABOUR_COST_PLN *
                              OUT_REC-QUANTITY.
Get the planned material cost from the total of the planned cost of
the component materials in the production order confirmations.
SELECT BWART MENGE MATNR SHKZG FROM AUFM
    INTO (AUFM-BWART, AUFM-MENGE, AUFM-MATNR, AUFM-SHKZG)
   WHERE AUFNR EQ AFPO-AUFNR.
    CHECK AUFM-BWART NE '101'.
    READ TABLE I_MBEW WITH KEY MATNR = AUFM-MATNR
                               BWKEY = AFPO-DWERK.
    IF SY-SUBRC NE 0.
      SELECT MATNR BWKEY ZPLPR LPLPR PEINH
        FROM MBEW
        INTO I_MBEW
       WHERE MATNR EQ AUFM-MATNR
         AND BWKEY EQ AFPO-DWERK.
        APPEND I_MBEW.
      ENDSELECT.
    ENDIF.
    IF SY-SUBRC EQ 0.
      IF I_MBEW-ZPLPR NE 0.
        IF AUFM-SHKZG EQ 'H'.
          OUT_REC-PLANNED_MATERIAL_COST =
          OUT_REC-PLANNED_MATERIAL_COST +
                       ( I_MBEW-ZPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ELSE.
          OUT_REC-PLANNED_MATERIAL_COST =
          OUT_REC-PLANNED_MATERIAL_COST -
                       ( I_MBEW-ZPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ENDIF.
      ELSEIF I_MBEW-LPLPR NE 0.
        IF AUFM-SHKZG EQ 'H'.
          OUT_REC-CURRENT_MATERIAL_COST =
          OUT_REC-CURRENT_MATERIAL_COST +
                       ( I_MBEW-LPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ELSE.
          OUT_REC-CURRENT_MATERIAL_COST =
          OUT_REC-CURRENT_MATERIAL_COST -
                       ( I_MBEW-LPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ENDIF.
      ENDIF.
    ENDIF.
ENDSELECT.
Get the Future material cost per Unit by deviding the calculated
Future material cost above with the goods reciept quantity to, then
multiply the unit cost with the GL quantity to get the Future material
Cost for the Quantity delivered. (Quantity in the entery from GLPCA
Table).
IF NOT AFPO-WEMNG IS INITIAL.
    OUT_REC-PLANNED_MATERIAL_COST =
       OUT_REC-PLANNED_MATERIAL_COST / AFPO-WEMNG * OUT_REC-QUANTITY.
    OUT_REC-CURRENT_MATERIAL_COST =
       OUT_REC-CURRENT_MATERIAL_COST / AFPO-WEMNG * OUT_REC-QUANTITY.
ENDIF.
ENDFORM.                               " GET_COSTS
Form GET_VALUE_FROM_COSP                                             *
Get the Material cost from COSP table.                               *
There are no interface parameters to be passed to this subroutine.   *
FORM GET_VALUE_FROM_COSP.
FIELD-SYMBOLS: <FS> TYPE ANY.
DATA: V_COMPONENT TYPE I.
Cummulate the posting values of all the 16 period buckets as to get
total production order cost. This is to handle the aprtial posting of
prodction order values in diffrent periods.
V_COMPONENT = 15.
DO 16 TIMES.
    ADD 1 TO V_COMPONENT.
    ASSIGN COMPONENT V_COMPONENT OF STRUCTURE COSP TO <FS>.
    IF COSP-WRTTP EQ '04' AND COSP-KSTAR EQ P_KSTAR2.
      ADD <FS> TO OUT_REC-MATERIAL_COST_ACT.
    ELSEIF COSP-WRTTP EQ '04'.
      ADD <FS> TO OUT_REC-ADDNL_MATERIAL_COST_ACT.
    ELSEIF COSP-WRTTP EQ '01' AND COSP-KSTAR EQ P_KSTAR2.
      ADD <FS> TO OUT_REC-MATERIAL_COST_PLN.
    ELSEIF COSP-WRTTP EQ '01'.
      ADD <FS> TO OUT_REC-ADDNL_MATERIAL_COST_PLN.
    ENDIF.
ENDDO.
ENDFORM.                               " GET_VALUE_FROM_COSP
Form GET_VALUES_FROM_COSS                                            *
Get the Labour cost and Labour hours from the COSS table.            *
There are no interface parameters to be passed to this subroutine.   *
FORM GET_VALUES_FROM_COSS.
FIELD-SYMBOLS: <FS1> TYPE ANY,
                 <FS2> TYPE ANY.
DATA: V_COMPONENT1 TYPE I,
        V_COMPONENT2 TYPE I.
Cummulate the posting values of all the 16 period buckets as to get
total production order cost. This is to handle the aprtial posting of
prodction order values in diffrent periods.
V_COMPONENT1 = 15.
V_COMPONENT2 = 111.
DO 16 TIMES.
    ADD 1 TO: V_COMPONENT1, V_COMPONENT2.
    ASSIGN COMPONENT V_COMPONENT1 OF STRUCTURE COSS TO <FS1>.
    ASSIGN COMPONENT V_COMPONENT2 OF STRUCTURE COSS TO <FS2>.
    IF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ P_KSTAR1.
      ADD <FS1> TO OUT_REC-LABOUR_COST_ACT.
      ADD <FS2> TO OUT_REC-LABOUR_HOURS_ACT.
    ELSEIF COSS-WRTTP EQ '04'.
      ADD <FS1> TO OUT_REC-ADDNL_LABOUR_COST_ACT.
      ADD <FS2> TO OUT_REC-ADDNL_LABOUR_HOURS_ACT.
    ELSEIF COSS-WRTTP EQ '01' AND COSS-KSTAR EQ P_KSTAR1.
      ADD <FS1> TO OUT_REC-LABOUR_COST_PLN.
      ADD <FS2> TO OUT_REC-LABOUR_HOURS_PLN.
    ELSEIF COSS-WRTTP EQ '01'.
      ADD <FS1> TO OUT_REC-ADDNL_LABOUR_COST_PLN.
      ADD <FS2> TO OUT_REC-ADDNL_LABOUR_HOURS_PLN.
    ENDIF.
ENDDO.
ENDFORM.                               " GET_VALUES_FROM_COSS

Creating Query to show items from open sales orders with a/p invoice

Hi experts,
I am trying to create a query that will show what items/quantities are still in open sales orders that can now be filled by an incoming shipment of goods, processed through the a/p invoice.
This needs to be done using subqueries, which I have no experience with. I am trying to do this using the ORDR and RDR1 tables to show the open items from the sales orders and the OPOR and POR1 tables to show items just received in to inventory. I would like the query to show exactly the open item's, their quantities, the posting date from the sales order and the customer name that can now be filled from the new shipment through the a/p invoice.
I appreciate the assistance,
Hayden (on behalf of Todd)

Hello,
try this
SELECT T0.[DocDate], T1.[ItemCode], T1.[Dscription],( T1.[Quantity] - T1.[DelivrdQty]) As "Open Qty" FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry WHERE T0.[DocDueDate] <= [%0]And ( T1.[Quantity] - T1.[DelivrdQty]) != 0
Try this query in query manager.
Thanks
Manvendra Singh Niranjan
Edited by: Manvendra Singh Niranjan on Jul 13, 2011 6:27 AM

Unconfirmed line items of a sales order into account in credit management

Hi Gurus
Updated the customer orders via prog. RVKRED09.
There is only one open order for this customer = 720662. My question is: in the credit master the sales value/credit exposure is USD 77.100,00. The order is for USD 105,900.00 .
Found out that line item 20 is not confirmed in the schedule lines. So the value in the sales value/credit exposure equals item 10 and 30. So my 1question is: Where is the setting that does not take unconfirmed line items of a sales order into account in credit management?
Thanks in advance
Regards
Nalini Iyer

Hi nalini
Even though , you create a sales order for that line item , but if that item is not confirmed then the value wont be considered. into credit exposure. .
But once it gets confirmed then the value will be taken into credit exposure..
Regards
Srinath

Route schedule not updated in some line item of a sales order

Hi Gurus,
All order are processed through the EDI interface automatically. Order
XXXXXXXXX for USA customer 40000XXXX is maintained in route reschedule
setup T-code VL52 on specific departure day thursday.
above are line item of same sales order, with same shipping point and route .
Why only some salesorder lines missing the route schedule ??
Please Help
Regards
Abhilash

When you post a query here, you need to have patience until some members go through your post. Please dont expect somebody should respond to you immediately as everybody has their own priorities.
Coming to your query, it could be due to many reasons as per the following note:-
Note 1750978 - Route Schedule does not populate on sales order
Go through the Resolutions given in the above note and check with your system
G. Lakshmipathi

Send all line items of a sales order to IPC along with condition lines data

We wrote some pricing routines in R/3, where while doing he calculations for condition line item, we needed to pull in the material information for previous line items. So we exported vbap and imported it inside the routine to be able to have access to all the line items in the sales order. Now, we need to put in the same kind of logic in CRM/IPC. My question is what would be the equivalent of SAP's(import/export) commands for internal tables in case of IPC. I looked at the BADI CRM_COND_COM_BADI but still do not see how I can send all the line items data to IPC. So I guess, the question comes down to, how do I send all the line items of the sales order (whole VBAP in R/3 terms) to IPC along with the condition line data? Can someone please help?
Thanks

Hi Vaibhav,
If you can get the list of Sales orders which has deleted line items and force completion status. You can manage them in BI via lookup or navigation attribute.
Just my views I am sharing .
Thanks,
KDJ

Issue while changing Item Category during Sales Order Creation

Hi,
Requirement:
Requirement is to change the item category of Sales Order item while creating the sales order.
Rule is: If item category is IRAT then it should be changed to IRLN.
For this, I am using the user exit "USEREXIT_SAVE_DOCUMENT_PREPARE" available in the include MV45AFZZ.
Issue:
Using the above mentioned exit, Item category is getting changed to the desired value in the created sales order BUT value of Billing Status (VBUP-FKSAA) which is supposed to get changed is blank.
For example, Sales order is created from VA01 and item category is changed manually to the value mentioned above, then for the sales order created we have VBUP-FKSAA = 'A'. But when value of Item category is not changed manually and it is changed from the exit, then value of VBUP-FKSAA is blank.
I have to find a solution which would change the value of Billing Status according to the change in the value of Item Category.
Please suggest a relevant solution.
Thanks a lot for responding.
Abhinav.
Edited by: Abhinav Jain on Apr 9, 2010 6:47 PM

Hi Abhinav,
I have a simmilar problem. In my case I am changing Reason of Rejection in the user-exit, but net value is not getting updated. Did you solve your problem? Any other way to change a field of a sales order item?
Thanking you in advance,
Nisha

How to Change Item catgegory in sales Order

Hi all,
I am creating sales order with reference to sales contract but at the time of sales order we don't have en off stock to deliver to customer , so we have deiced to go for Third party sales process
But the problem is while creating a sales order with reference to Sales contract the line item of the sales order line item in grad Mode ( Not changeable mode )
Finally i find out why sales order line item in gray mode Due to Structure Scope Using in item category TAS as D to Explore the BOM In Contract and Sales order that a reason system gray out sales order line item
Can any one guide me how sales order line item should be in active mode so i can change the Item category as a TAS third party item category
Help me regards this
Thanks
Rajesh

Hi all,
Thanks for replay
all ready i maintain manual item category in VOV4 the movement i am creating sales order with reference to contract the sales order line item showing in GRAY mode i cant choose manual item category while i choosing F4 its showing TAS but i cant select that item category because sales order line in gray mode
and Find out the reason why sales order line item coming in Gray Mode because i am Using Structure Scope D In Item Category
to Explore Variant config
can any one suggest me how to change the item category
Thanks
Ram

Text catagory - Text item (TATX) in sales order

Similar Messages

Maybe you are looking for