Text Format changes when Published Online.

I upgraded from iWeb 06 to iWeb 08 and then my pages online stopped text wrap in the pages. The pages are fine in iWeb, but not when you visit the site. I have rePublished the site, but still the same.

Once I upgraded, I never did a "Publish All to .mac", I just would use the publish button. After I deleted and made the change again and did a "Publish All to .mac, it worked.

Similar Messages

Format Changes when Exporting to PDF

I'm using Crystal 12.0 and have an issue very similar to these threads listed below.
While viewing a report on my development machine, all is fine. I can export to PDF and the formatting is OK.
However, when the report is exported to PDF on the web server, the spacing between some of the text is off. The spacing is used for a CrossTab cell in a "Display String" that I changed using "Format Field." All that's supposed to happen here is several spaces are used to move the text under the proper column.
When exporting to PDF on the web, the text moves over to the left like it's missing some of the spaces. I wondering if the below threads apply to Crystal 12.0.
Thread:1220516 and
Format Changes when Exporting to PDF
Thanks kindly for your assistance,
-Marty

I'm having a very similar problem using Crystal Reports for Visual Studio 2008. Everything is perfect when running in VS 2008, it takes the report and exports it to PDF format via VB code. The PDF file is idenitcal to the report. However, when run on the server the one page report (when exported to PDF) gets chopped into ten 4x4 chunks. So the PDF file is 10 pages....its like puzzle pieces of the original.
I've drawn a bunch of lines on the report to look like boxes - perhaps this is causing issues? The font on the report is Arial.
The server has the 10_5 runtime installed and it is set to the same default printer as the development PC. I have been stuck on this for days and would really appreciate any advice you may have.
Thanks!
Edited by: WanderingEye on Sep 18, 2009 4:54 PM

Dynamic text not displaying when publishing for flash 8

This dynamic text works fine when the movie is published for
flash 7, but when i export for the flash 8 player it seems to be
invisible. Is there any obvious reason for this happenning?
thanks
jon

Ok, thanks, looks like you've pointed me in the right
direction. I havent fixed it yet though. Heres where i am at:
eval(theTarget+".buttonPrime").tex.embedFonts = false;
now i can see my text. of course its using a default font.
var my_fmt:TextFormat = new TextFormat();
my_fmt.font = "arial14b";
eval(theTarget+".buttonPrime").tex.embedFonts = true;
eval(theTarget+".buttonPrime").tex.text = "wasssup?";
eval(theTarget+".buttonPrime").tex.setTextFormat = my_fmt;
this isnt working. I have added a font object to the library
and linked it for actionscript using the monkier "arial14b".
however my text is quite invisible. i have checcked, 'export in
first frame' for the font object i even tried it with this
deselected. i have deselected the embed font option on the text
feild itself. that doesnt work either (unless i dont try to set the
text format, so long as i accept a default font, its fine).
so err, help?
confused
jon
ps further to this is have discovered more about this strange
behaviour. i can set the text to a different string, provided i do
not try to embed the font in any way. if i set the font to embed, i
can have the text display with the correct font, until i change the
text. then it dissappears. also i cannot seem to affect properties
like font size by means of my TextFormat object. the textFormat
object also does not seem to affect the font of the text.
in short, when exporting for flash 8, i cannot seem to
successfully embed fonts for dynamic text. the only thigs i have
gotten to work are: static text (or a dynamic text feild with
unchanged text) with an embedded font, or dynamic text with a
default font.

Format changing when IDCS3 file exported to PDF

I am using Acrobat 8 version 8.1.2, and InDesign version 5.0.2.
I am noticing a very specific problem when exporting some files to PDF from InDesign.
We often have a format where we have a numbered list of right-aligned number, followed by some text, a leader line, and then another number at the end of the line. This is set up with a left indent and a first line left indent (rather than using the numbered list options, we are required to do it this way where I work), and then the necessary tabs later in the lines.
I am finding since we switched to IDCS3, that when I export to PDF, lines containing this format change in the PDF. The text that appears after the number in the front of the line is pushed over on top of the leader line, leaving a huge white space. On rarer occasions, it will move things in lines that have no indents, but contain tabs that aren't being used.
I have been able to get the files to export correctly by removing the left indent and first-line left indent and using tabs instead (or by removing unused tabs). But we have hundreds of files set up in this manner so going in and changing how they are all set up is problematic to say the least. Many of these are also multi-line and not using the indents means we have to manually tab lines over.
Is this a known issue? Does anyone know why this might happen and how I can prevent it?
I tried posting in the Acrobat forums and it was suggested since it's an export issue that I might get more help from the InDesign folks.

Given that the file is being exported to PDF and not going via a driver route, there really is no reason why changing the default printer should make a difference whatsoever in this particular case. Changing default drivers in Microsoft Office applications, yes, but for this situation, no. And since Acrobat doesn't change formatting, the issue sounds like some problem associated with InDesign. Please report this problem directly to Adobe Tech Support and be prepared to send them sample files. Thanks!
- Dov

Format changing when exporting from InDesign to PDF

I am using Acrobat 8 version 8.1.2, and InDesign version 5.0.2.
I am noticing a very specific problem when exporting some files to PDF from InDesign.
We often have a format where we have a numbered list of right-aligned number, followed by some text, a leader line, and then another number at the end of the line. This is set up with a left indent and a first line left indent (rather than using the numbered list options), and then the necessary tabs later in the lines.
I am finding since we switched to IDCS3, that when I export to PDF, lines containing this format change in the PDF. The text that appears after the number in the front of the line is pushed over on top of the leader line, leaving a huge white space. On rarer occasions, it will move things in lines that have no indents, but contain tabs that aren't being used.
I have been able to get the files to export correctly by removing the left indent and first-line left indent and using tabs instead (or by removing unused tabs). But we have hundreds of files set up in this manner so going in and changing how they are all set up is problematic to say the least.
Is this a known issue? Does anyone know why this might happen and how I can prevent it?

I haven't tried printing to PDF. I will try that and see what happens. Unfortunetly, where I work we are required to export to PDF rather than print to PDF, so if it works it will only be a clue for me rather than a solution.
Thanks for the reply. I'll try a cross post to the InDesign forms.

Text color changes when more than one color is used in the same paragraph in a bulleted list

I work in a print shop on designers' files preparing them for print. Machine I use is an iMac, plenty of RAM, running Tiger 10.4. Here is my problem: A PC user sent us an InDesign CS3 file. A portion of the text is styled as a bulleted list with character color and bullet (the solid circle) defined as (default) black. However, the style is over-ridden on the bullet and first two words following the bullet with a spot color red, which is present in the Swatches palette (PMS 186). The remainder of the sentence stays black. The text somehow lost this override, and instead of keeping the 2 different colors all the text changed to black. This seems to have occurred when I saved the file on my machine. When I go back and open the original file the text is still colored both red and black. I think that the file was originally an InDesign CS2 file, and could even have been a Indd version 1 or Quark file. Why did the color change with no user intervention? Also, I can't understand why, when the first 2 words are highlighted and changed to red, the bullet also changes to red. (That is good, of course, because that is what we want, but I don't understand how that happens when the character style is black, and I can't even highlight the bullet itself). I sure would appreciate any ideas anyone has on this, I have to try to explain why we printed the text in black when it was supposed to be red and black!

thanks Alan and Bob. Nothing has explained the loss of color so far.
Alan, I will suggest to the designer that she use a nested style. I wonder if that will make the styling more stable moving accross the different platforms.
Bob, I feel like you may have thought, as I did, that hundreds of saves and saved-as and many different applications would have damaged the file, but as you could see by the History, the file was fairly fresh.
There is a very outside chance that I wiped out the style overides by command click but I am really careful and I doubt it.
So I'll thank you both again and check back each day, perhaps this will happen to someone else and become an issue. I have tried to repeat my actions and cause the error again but to no avail.

Rollover states not working when published online. Suggestions?

I have created rollover states for image navigation. Works great in preview. Works great when published to desktop. I have uploaded to FTP site. Some of the rollovers work, others do not.? I have replaced and re-uploaded, still not working. The normal and active states all work, but the rollover state vanishes. The images are in the image folder. The css pages do have the code to swap the images. Same issue in Chrome, Safari, Firefox, and on ipad.
What am I missing? Thank you for your help!

What's the URL?

Text format problem when sending mails

Hi all,
I am using the FM SO_DOCUMENT_SEND_API1 to send mail in text format, but the problem now is iam getting the space between each characters and also for each lines the alignment differs. can any one tel me how to solve this issue ?
D o c u m e n t   N o       L o g   D e s c r i p t i o n
4 5 0 0 0 0 1 4 1 0       PO d o n e   f o r   G o o d s   r e c e i p t   o f   P O   4 5 0 0 0 0 1 4 1 0
4 5 0 0 0 0 1 4 1 1                   PO   d o n e   f o r   G o o d s   r e c e i p t   o f   I n t e r C o P O   4 5 0 0 0 0 1 4 1 1
4 5 0 0 0 0 1 4 1 2          PO   d o n e   f o r   G o o d s   r e c e i p t   o f   I n t e r C o P O   4 5 0 0 0 0 1 4 1 2 .
Thanks.

Hi Siva,
Seems problem with the types.Define following paramaters as shown below.
DATA: DOCDATA    LIKE SODOCCHGI1 OCCURS 0,
       OBJPACK    LIKE SOPCKLSTI1 OCCURS 0,
        OBJHEAD    LIKE SOLISTI1   OCCURS 0,
        L_OBJTXT1     TYPE SOLISTI1,
        RECLIST    TYPE SOMLRECI1,
        DOC_CHNG TYPE SODOCCHGI1,
        OBJPACK TYPE SOPCKLSTI1.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        DOCUMENT_DATA                    = DOC_CHNG
     PUT_IN_OUTBOX                    = 'X'
     COMMIT_WORK                      = 'X'
IMPORTING
SENT_TO_ALL                      =
NEW_OBJECT_ID                    =
      TABLES
      PACKING_LIST                     = L_OBJPACK
     OBJECT_HEADER                    = L_OBJHEAD
CONTENTS_BIN                     =
       CONTENTS_TXT                     = L_OBJTXT
CONTENTS_HEX                     =
OBJECT_PARA                      =
OBJECT_PARB                      =
        RECEIVERS                        = L_RECLIST
   EXCEPTIONS
     TOO_MANY_RECEIVERS               = 1
     DOCUMENT_NOT_SENT                = 2
     DOCUMENT_TYPE_NOT_EXIST          = 3
     OPERATION_NO_AUTHORIZATION       = 4
     PARAMETER_ERROR                  = 5
     X_ERROR                          = 6
     ENQUEUE_ERROR                    = 7
     OTHERS                           = 8
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
Regards,
Ravinder

Imported text formatting disappearing when changing font in character palette.

Something seems to have changed with my InDesign, and I'm not sure why. Here is what I used to be able to do.
I could import a word doc into a text box. This text would have bold, regular, italics fonts. I would select the text box, then change the font using the character palette by just changing the top font box. For example, if the font imported in as Helvetica but I wanted it all to be Futura, I would select the box and then just type Futura and all of the Helvetica bolds would become Futura Bold, and the Helvetica Italic would become Futura Italic, etc. I didn't have to select each line.
Now if I try to do that same thing, when I select Futura, it just changes ALL the text to Futura Regular. I lose all previous formatting that was imported in from the word doc.
I hope this makes sense.
How can I go back to the way it was?
PLEASE HELP! This is maddening! Not a big deal for a single flyer design but when laying out a book, this could add DAYS to the project.
thanks!

I believe the issue lies in the font palette. Here is what I used to do.
- New document.
- Create text box.
- Select text box.
- CMD + D
- Select word doc
- Text is imported with bolds, italics, etc.
At this point, let's say I want font to be Myriad Pro...but I want the bold to remain bold and italic to remain italic.
- Select text box.
- Type font name into font palette (No dropdown or popup menu used to appear, now it does). Used to just type Myriad Pro then hit return.
- Font in text would retain bolds and italics and become Myriad Pro. So if a line in the text imported as Helvetica Bold, it would now be Myriad Pro Bold.
Now when I do this, it just changed ALL of the text to ONE font. If I type in Myriad Pro, a drop-down menu appears and automatically selects Myriad Pro Condensed.
I hope that helps. I know I'm not crazy. This is what I have done forever. I use InDesign every day...and have for years. I rebooted my mac two days ago and this problem appeared. It seemed like some sort of awful update. haha. When I rebooted, I lost all of my preferences. InDesign went back to points and picas instead of inches. Smart guides appeared, I had to turn those off again. Stuff like that.
Any thoughts?

Crystal 2011 - Formats lost when published to CMC

Hi team,
Here's my issue...
Have exported a Crystal 2009 report and saved it into 2011.
I noted that some of the formats had changed slightly. i.e. font size, paragraph line spacing
Fixed these, ran the report from crystal 2011 and exported the report to PDF, looks great!
Published the report to CMC and ran a test hoping to get the same results, however this time the formats are gone?
Can anyone tell me what I've done wrong, please.
Thanks,
Simon

Thanks for your reply, the formats are being lost when I export to PDF.
We wonder if the problem is something to do with the way the text was formatted in the older version of crystal and that exporting and importing into Crystal 2011 has lost some of this.

Headers and footer formatting changes when word docs are loaded to pages

I have loaded template word documents from my Imac to ipad pages. If I turn around and email the template out, the heading formatting has changed.
Is there a list of specific fonts I can import word-docs with to not do this?
Also, when I click on the document in pages to change the header, it has three sections, Can I combine the sections to make 1 or 2 sections?
D

Hi, I have a similar problem with Word (.doc) files containing a Table converted to Pages. Having read that Pages can convert from Word, I bought iWork instead of Office for Mac. I need to work on Word documents sent to me as attachments and find that Tables do not survive the conversion to Pages properly. Often the text within a Table is shown but, if a lengthy text (i.e. more than a page), the Table does not continue to the next page and the text becomes hidden below the visible Table. If I cut out some text from the middle of the Table, the missing text is revealed, progressively from the bottom of the Table. In other words, the text is there in the document but cannot be seen if it is more than can be fitted on one page. Any ideas on how to sort this? I am not encouraged that iWork 09 does not appear to help in a similar problem to mine.

Why does text appear bold when published?

My entire web site suffers from text that appears bold when I publish. I have followed various other threads, changed typefaces, put in returns and tried a variety of "tricks" and although some people appear to have fixed it, there is no universal fix that I can find. Has anyone else had any luck solving this? It ***** because it makes the whole page look rather unprofessional. www.brain-storm.com is the site.
Thanks

This problem occurred last night to me as well. I've been using iWeb for a couple of months with no problem. I added a blog entry and some photos last night and then published. When I checked out the site all of my text was bolded.
I'm new to Macs and iWeb so I struggled for hours last night and this morning to correct it. No luck.
Any ideas someone can suggest would be huge.

Title fonts change when published

I have been making a site based on the white template. It has a picture in the header. When I alter the page title (e.g. change colour) the font changes to small hardly readable text wjwhen published, even though it looks fine in iWeb (and was fine prior to changing the font colour).
Can anyone help? Is it because of having the jpeg in the header part? There is no overlap of images and the page title.
Thanks

Try dragging the photo out of the header, deleting the text and redoing it in the color of your choice and then putting the photo back.
Save and do a "publish all" and make sure you empty your browser cache before viewing the changes in Safari.
This covers three trouble shooting steps at once and may save you time in the long run.

FM 10 xref format changes when updating file

I'm authoring in structured FM 10 using a DITA 1.2 application on Windows 7, but working with FM documents rather than XML files. I was having problems updating cross-references in my existing (structured FM 7.2) files after upgrading to FM 10 -- FM was changing all xref formats to DITA Default Format, which blew away all of my defined formats. So I opened one of the standard structured templates included with FM 10 (DITA_1.2/app/technicalContent/template/topic.template.fm), thinking that I set up my structured application incorrectly.
I know I must be missing something simple, but this is what happens when I create and update a cross-reference:
Using the unmodified structured template and the unmodified DITA 1.2 application that comes with FM 10, add an fm-xref element.
Using the DITA-Cross-Reference dialog box, create the xref (doesn't matter if it's an internal or external xref).
Select See_Title_and_Page xref format. Xref looks fine in the source document.
Select Edit > Update Reference, and select All Cross-References.
When I click Update, FM updates the xref but changes the xref format to DITA Default Format. I can see that the See_Title_and_Page format included in the template uses the <$paratext> building block instead of <$elemtext>, but I can't delete or modify this format and I can't create a new xref format, either, since the DITA Cross-Reference dialog box doesn't give me those options.
However, if I create a new FM book and add this file to it, and then select Edit > Update Book, and select All Cross-References, FM updates the xref and maintains the xref format I chose.
So, why does updating a file remove the selected formats from all xrefs and replace them with DITA Default Format, while updating a book does what I'd expect (and what FM has always done)? And why can't I modify an xref format using the template/DITA 1.2 application that comes with FM10?
Thanks for any assistance.
--Steve

Hi Saurabh,
Thanks for the reply. I guess it's reassuring to know that the automatic reformatting of xrefs by FM isn't due to something I've overlooked. As long as there's a workaround, I'll keep updating xrefs from a book. Not a great workflow, but it won't block our writing for now.
On the other issue: Thanks, I do know how to edit xref formats and import them from a template. My confusion, however, stems from two things:
I can't edit xref formats in the DITA Cross-Reference dialog box, which is all you see if you're using the DITA 1.2 template that ships with FM 10. I can edit the formats from the Cross-Reference dialog box, but I can't figure out how to access that when using Adobe's template. Adding a new xref or selected an existing one just activates the DITA dialog box, which doesn't have an Edit Format option (shouldn't it? wouldn't you want to be able to edit those formats? or do you always have to do that from one of the application files?).
The DITA Default Format won't go away. In my own docs (DITA 1.1 FM files), I can get to the Cross-Reference dialog box and edit xref formats. If I delete the DITA Default Format, save the file, close it, and then reopen it, the unwanted DITA Default Format is back. I can reapply the formats and element defintitions from the template as much as I like, but any time the file is reopened the deleted format reappears. It won't die, and I have no idea where it's coming from (definitely not the template or the EDD, which I've checked and reimported). Is this some odd default behavior of ditafm_app.dll?
Again, thanks for responding.
--Steve

Format change when report open in report expert

Hi all,
I am using report builder 6i and I create invoice report I have attached it with oracle ebs 11i and run it from
concurrent manager. Now I have to open my invoice report into report expert software.
when it opens into report experts, It change our report builder fonts and format both.
suppose if item are 1 then invoice total depens upon number of items. so invoice total position is changed
according to the number of items. If 1 items total move up and if more than 1 item total moves down.
In this way my invoice format become changed and total did not maintain in same position.
Thanks

The Format is changed due to sizes of Repeating frames in the report layout as well as the fixed frames.
you can use the border color of the frames to design the report layout.
when your fixed frame is not in lined with the repeating frame objects and the anchor is not applied then the report output in PDF will not be disturbed
while in the Excel format it will be as per the no. of fixed frames/objects in the first line will come in first A1 column of the Excel file ans next in the second and so on...

Text Format changes when Published Online.

Similar Messages

Maybe you are looking for