The 10.5.7 Leopard update does not appear on my software update?
I currently have 10.5.6 Leopard, however couple of weeks ago i read an article that Apple had release 10.5.7 update. However whenever i click software update, it says that i have no updates?
How can i get this update, or make it appear on the software update? thanks in advance.
HI,
Go to the Apple Menu (Apple logo top left in your screen) then click Software Updates.
It's very important to read this material first before installing this update.
http://support.apple.com/kb/HT3397
Run Disk Utility and repair disk permissions before and after the installation.
Launch Disk Utility. Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility.
Tip... this update may restart your Mac several times. Do not turn the Mac off. Do not stop it in the middle of the update thinking it's crashed. It can take about 15 minutes or more. So don't panic if the computer turns off and on several times before it's finished.
Carolyn
Similar Messages
-
HT5934 IOS 7 update does not appear on my software updates on my 4s iPhone? What do I do?
I tried updating to the iOS 7 version but when I go to my setting to software updates it doesn't even show that there is an update?
restart your iphone (turn off, turn on)
if it doesnt appear then, plug it into itunes on a computer and check for updates there. -
ITunes Update 10.3.1 does not appear in Apple Software Updater
Updated to version 10.3.054 yesterday, ran the Updater program and 10.3.1 does not appear?
Any suggestions?I figure Allan has been out patrolling via "Browse > Discussions", rock:
... which gets you through to a list of posting that isn't broken down by individual forums:
I'm doing that a bit myself nowadays. So we tend to see folks like Allan and Kappy here more, and periodically I show up at Snow Leopard offering advice too ...
Nice to see you around too. -
How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the first generation ipad.
The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972 -
I have just updated my MBP 17 / retina display to Maverick OS. I am unable to shutdown or log off. When i press the shutdown button, a black screen appears which goes off on pressing any key. The shutdown or log off dialog does not appear. Your kind help is much appreciated.
The button response has changed.
Short press : sleep
Medium press (2-3 sec) : restart, shutdown, sleep dialog
Long press : force shutdown. (Same as before) -
I seem to have lost fax capability with Snow Leopard.
Does not appear in Print as before. Cant find fax in System Preferences. No drivers for fax found.
Initially said it was downloading software but no longer does this. Fax test works on HP site.
Using HPC410aHP Photosmart Premium
Any help would be appreciated.
Bob Wines.Thanks for your detailled description of the faxmodem installation!
I've tried this with Mac OS X v10.8 Mountain Lion and it works fine.
I've to type "cupsctl WebInterface=yes" in terminal to see the interface.
Does anybody know, if send faxes are saved somewhere? -
when registering my iphone on itunes the message - the sim card insertedin this iphone does not appear to be supported - can anyone shed some light on this and tell me a way around this problem? the phone itself is an english phone and tried to register with a spanish sim and that message appeard, so i tried with my iphone sim which is english and the same message appeared!
thanksIs the English sim from the original carrier as that is usually the message you get with a carrier locked phone.
-
It says I can drag Pages documents from iMac to iCloud. But nothing shows up.
Using latest with all turned on. How do I get Pages up to iCloud? The little wheel like action menu does not appear.yes is tehre another way
the directions do not explain anything other than drag
or use the little action wheel menu -
Dear experts,
I am having an issue when I try to create a WEBI document using Bex query through OLAP connection (Bics).
Due to variables exit, it is not possible to open query pannel in webi to choose wich dimensions to add to the webi document.
The window to select dimensions simply does not appear and I can't move forward!
In RSRT ou Bex Analyzer, the query is running fine without errors.
CMOD code is like this (I believe there is not any error as it is working flawless on other reports for other variable names):
WHEN 'ZREDT1'.
IF i_step = 2.
CLEAR wa2.
READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
* wa2-low = |{ v_year_h }12|.
IF sy-subrc EQ 0.
v_year_h = wa2-low(4) - 1.
CONCATENATE v_year_h '12' INTO wa1-low.
* wa1-low = wa2-low.
wa1-opt = 'EQ'.
wa1-sign = 'I'.
APPEND wa1 TO e_t_range.
ENDIF.
ENDIF.
WHEN 'ZREDT2'.
IF i_step = 2.
CLEAR wa2.
READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
IF sy-subrc EQ 0.
* wa2-low = |{ v_year_h }12|.
v_year_h = wa2-low(4) - 1.
CONCATENATE v_year_h '12' INTO wa1-low.
wa1-opt = 'EQ'.
wa1-sign = 'I'.
APPEND wa1 TO e_t_range.
ENDIF.
ENDIF.
Please provide assistance,
Thanks in advance,
Kind regards,
André OliveiraI solved it.
The problem was due to date coming to exit - as you know some time intervals start at 01-01-1000, and as I was calculating 1000-1 = 999
I was getting and interval from 99901 to 201405. Do not know if it was not working because CHAR NUMC6 was failing trying to recognize interval 99901 - 201405, but probably, this was the issue.
Thanks for your inputs,
Best regards,
André Oliveira -
HT1535 The option for "On this IPad" does not appear?
Despite having a manual set up of content checked, the option for "On this IPad" does not appear? Why is this?
Hi pmbrady,
The "On this [device]" tab will only show up if you are in the non-sidebar view of iTunes. In short, if you have the sidebar on the left hand side, you will want to use the disclosure triangle (left of your device name) to view what is on the device.
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Thanks,
Matt M. -
I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running mountain Lion 10.8.2
Because line-in has been removed.
It does allow for an Apple headset with mic., but I don't know if it would work with third-party ones.
You'll need to use a Griffin iMic or similar to use line-in via a USB port.
The same goes for the 15" retina, the newest MBA and the new iMac (whenever it finally arrives). -
Where is the Authorise my computer option in the Itunes store?. It does not appear to be there. No way of downloading past purchases from a old computer at the moment..
open itunes.
look at the top of your computer screen for the word "Store" , click it -
i am having problems editing the security questions i do not remember i specifically followed the steps and the "send to rescue email" option does not appear even though my rescue email is verified please help me
<Email Edited by Host>As these are public forums, you're not talking to iTunes Support, I've asked the hosts to remove your email address from your post - it's not a good idea to post it unless you like spam email.
The reset link will only show if you have a rescue email address on your account - a rescue email address is not the same as an alternate/secondary email address, they are different addresses/settings on an account.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use -
I have installed IOS5 on my iPhone. There is supposed to be a camera icon/button on the lock screen that enables you to take photos without unlocking the camera. That icon/button does not appear. Do I need to configure something to get the icon to appear?
Double click your home button when the phone is locked. The camera icon will show up then.
-
Apple software updates does not appear to do its automatic checks?
I have itunes installed on two almost identical Windows 7 based PC's and I have noticed that on one PC the Apple Software Updates do not appear to do its job by checking for updates automatically. If I run the software manually it will show if an update is available and allow me to install it but I never seem to get prompted automatically by Apple Software Updates even though its set to check weekly. My other PC does prompt. Both PC's have pretty much exactly the same software installed including firewall. Any reason why this would not appear to be working? Any way of checking if its actually carrying out the checks?
The reason I suggested moving the files to the Desktop is because if none of these files are responsible for the problem, you can then put them back--or at least put back the com.apple.systempreferences.plist file, which would have many things in it besides the setting for Software Update. If it is the cause of the problem it would be a good idea to replace it and redo your settings. But if it is NOT causing a problem you would not want to figure out what all needs to be reset, instead you can put the old one back. The two plists from the ByHosts folders can probably just be trashed, and new ones created when you reset preferences for Software Update, although the scheduler might do something else (I don't have many things on auto schedule so I don't know, the only thing in mine is Software Update settings).
Francine
Francine
Schwieder
Maybe you are looking for
-
Cant import vid to save my life
ok, so i ripped a ton of dvds using #1dvd ripper program. pretty sure ripped em into mpeg4. videos wouldnt even go into itunes. i was told i need a converter so i got videora video to ipod converter. now video goes into itunes buttttt thats as far as
-
I'm putting in a critical solution for a company using SharePoint Online. It's pretty much out of the box, but the customer insists that a load-testing exercise takes place to ensure that when they go live with it, it will cope with their number of u
-
What does E_ADEPT_XML_SYNTAX mean.. The downloaded acsm-file does not open in Adobe Digital Editions
downloaded Adobe Digital Editions 4, and registered computer, verified email and then downloaded e-book from retailer, but the acmsfile does not want to open. This is very frustrating
-
Why did itunes charge me more then once on one transaction
I had made a puchase for $38.35 and it had charged me that same amount 14 times and I don't understand why or how to get that money back???
-
Hi all, I'm having some difficulties setting up an RSPAN to work from a specific remote office. I have the config working for our main head office and another remote office which tells me that its probably something in the remote switch configuration