The audio on my 1st gen iPad is sporadic -- can't trust alarms and sometimesdownkoaded iTunes won't play. What's going on?
My 1st generation IPad's audio is sporadic. Can't trust alarms and sometimes downloaded iTunes will advance but nothing can be heard. And yes, I have checked to be sure the audio Is turned on and the volume up high. Can anyone help me? Please don't tell me it's a hardware issue. . . .
I tried to install it, but now a little window pops up that says "The installer has insufficient privileges to access this directory C:Program Files\Quick Time\QTSystem\Quick Time.Resources.en.lproj. The installation cannot continue. Log on as an administrator or contact your system administrator".
Although those messages do sometimes indicate a folder permissions problem, they can also be caused by disk damage. So let's try running a chkdsk over your C drive first.
See the following Microsoft document for instructions and a "Guided Help":
[How to perform disk error checking in Windows XP|http://support.microsoft.com/kb/315265]
Does the chkdsk find/repair any damage? If so, reboot the PC and try another iTunes install. Does it go through properly now?
Similar Messages
-
How do I get the most out of 1st gen iPad?
I just gave my first gen ipad to a friend. The software apparently can only go up to 5.1.1. Any advice I can give him on how best to enjoy the ipad, given its limitations? Many apps are unavailable to him as they require the latest IOS.
Start by reading the user guide. There should be a link to it in safari, you can download it in iBooks, or see here: http://manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf
-
Updated software on 1st gen. ipad now I can'y log onto internet
Updated sofware on my ipad now I can't log onto wifi
Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo.
-
My Ipad has worked fine for a year and now it won't play music or videos
My Ipad has suddenly stopped playing music and videos??
Swipe your phone to unlock and enter your passcode.
You needed to enter a passcode before using the touch id.
If you touch id isn't working, then erase the old print and re do it.
I use two prints and have no issues using it. -
My ipod keeps skipping songs, and my itunes won't play anything since the update. help
since i have done the itunes update, none of my songs will play, but it will still sync my ipod. I recently synced my ipod and i have things i have downloaded from itunes and elsewhere, but some of the songs i have donwloaded from itunes cut out half way through playing.
thanks
ByronNothing a simple little RESET couldn't fix. -happy dance-
-
How can I move music from my 1st gen iPad to my new 3rd gen iPad
How can I move all the music on my 1st gen iPad to my new 3rd gen ipad?
Transfer the music into iTunes on your computer and then sync the new iPad with iTunes.
Or download all of the purchased music on the new iPad. You can download the songs again for free in the Purchased Tab of the iTunes App as long as you use the same Apple ID that you used to buy the songs with originally. -
I changed the drive letter on my iPod and now iTunes won't recognize it!
Help please! I contacted an Apple associate and they told me to change the drive letter of my iPod in My Computer. I did that and now iTunes won't recognize my iPod at all and I can't change the drive letter back to the original one. What do I do?
Try Resetting Your iPod while it's connected to the computer.
Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
This will often get it recognized. It may take several attempts.
Try closing and re-starting iTunes. There have been cases where iTunes refuses to see an iPod, but after re-starting, it works again.
Also try re-booting the entire computer. Especially if the PC has been operating for a long time &/or many programs have been opened and closed, repeatedly.
Other USB connected peripherals may be the cause as well. Try removing all connected USB items and attaching the iPod. If you have a USB keyboard, it may be worth a try using the adapter to convert it to non-USB. If the iPod connects, continue plugging things back in until you have the problem return. You may have then isolated the issue. Sometimes it could be a printer, camera, Flash Card reader, or other attached device causing a conflict. -
I received a 1st Gen IPad from a supplier as a gift to promote their products. They used their Apple account to load the apps. I am not able to load my own apps because their apple user is the one that pops up. How can I change it to mine?
Set it up as new device, explained in this article, without using the backup afterwards:
How to back up your data and set up as a new device -
I have a 1st gen iPad. Upgrade to IOS 6.1.1 appeared, but it quit shortly into the installing and has not come back up again. Both the iPad and when synced to the iMac, say i am fully up to date at 5.1.1! Has anyone had / got the same issue? How can I upgrade when it doesn't acknowledge there is no need?
You are most welcome
-
I have done everything I can find online to solve my problem, but I still have the same problem. My 1st gen iPad is not recognized in iTunes! Cannot sync! Please, any suggestions from anyone? Anyone else having the same problem?
Hello casinojen,
I would be concerned as well if my iPad was not recognized by iTunes. Thank you for providing all the information with the steps you took in regards to this issue. I found an article with a few more steps you can take (you can skip the steps you have already taken):
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My dad has a 1st gen iPad. He is 83 yo. I recently purchased an Apple TV for him because he loves Netflix and I told him that he could view his photos via the television. BUT, I'm not having success with Photostream. Help me.....I've been researching and trying everything I can and so far, no luck. He keeps asking about the photos, and I'm losing patience with myself and Apple TV. Can anyone help???? Thank you.
http://support.apple.com/kb/ht5209
http://support.apple.com/kb/ht4437
http://support.apple.com/kb/TS4215
Cheers, Tom
Oops!!!!!! Just realized Airplay & Apple TV requires iPad 2 (or later).
Message was edited by: Texas Mac Man
But there may be a way. http://www.youtube.com/watch?annotation_id=annotation_586623&feature=iv&src_vid= urjjHjJ0pdc&v=sSKQVxucnLY -
My sister gave me her 1st gen iPad to see if I could solve an issue. It won't turn on, and when it's plugged into a power cord there is a slow pulsing sort of flash that happens on the screen....any ideas?
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe! Now see if it charges normally and after a period try to turn it on again. If the batter has been drained it could take 20 minutes or so for it to show that it is charging.
Also considering if the battery need replacing! -
Why does my 1st gen iPad always turns itself off and goes back to the screen. Whether I'm reading news, iBooks, etc, suddenly it goes off.
If that doesn't help, the battery may be dying and need replacement. See here (tap on Battery Replacement): http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Alternately, might consider start saving for a new iPad. The newest iPad 6 should come out in the next few months. When it does, sellers will want to get rid of old inventory with good deals. -
So 1st gen ipad users are basiclly left out in the cold unless they go out an buy a new IPad - of course DTV and The Blaze are blaming Apple and Apple is blaming them - what is the deal Apple - I pay for my subscription to The Blaze in order to have it on my IPad and now I can't even use it - same with DTV - so is Apple now forcing people to buy upgraded devices thru their apps that will no longer support the older generations - what a joke this is and bad business.
Unfortunately software always moves faster than hardware.
Apple's not going to change things. You can try talking to those two app developers and have them make their older versions available.
Beyond that, if you wish to express yourself directly to Apple, http://www.apple.com/feedback/
This is just a user to user forum, so there's nothing anyone here can do for you I'm afraid. -
iPad 1 is a lot newer than iPhone 3GS. It has the A4 chip! Why no IOS 6 for the 1st gen. iPad?
quite surprised it suggests that iPhone 3gs s more powerful than the iPad1? iphone 3gs is supported. something is fishy. i don't want to fall out of love with apple products. looks like it's a business decision to cut support for iPad 1 - not technical shortcoming. if apple cut support for 3gs they will upset customers who just bought 3gs before iphone 5 was launched.... tsk tsk tsk.. i'm not from US. hope to see a class action suit by US peeps to resolve this...
Maybe you are looking for
-
On windows 7 only, ie9 and firefox 4 spry bar not displaying correctly?
This website www.colonialstock.com does not display the spry menubar correctly. I need it to go all the way to the right. But when I do a view on IE8 or do the compatibility view on IE9 (which is the same as IE8) it brings the bar too far, making i
-
I am running Creative Suite 5. I have already tried to re-install the program twice after I had my computer reformatted by a service. They said I would have to reinstall some programs. I have been told by others that I need to receive reauthorization
-
Disconnecting display knocks Mac off network
After the latest Tiger update (10.4.4) my PM G5 disconnects from the network (AirPort Extreme card connecting to a Linksys 802.11g router) when I unplug the monitor. I use a PowerBook for work, and when working from home I disconnect the display, Fir
-
I can't "burn" photos or iTunes music.
I get a message that "the disk burner can't be found". I could burn before so why is the disk burner missing now???
-
I made a simple form. There are 2 text fields (for Name and E-mail) and 1 text area (for Comments) along with the Submit and Reset button. When users clicks the Submit button it re-directs them to another page (the form action is set to 'sent.asp',wh