The Balances are not Matching (Doubling in WebI Report)

Hi all,
I have balance amount (Key Figure: Balance from FIGL_Cube) coming from SAP BW to WebI. When I see the report in WebI, the balance is doubling. Ex., If I have Balance=$100 in SAP BW Cude, it is showing $200 in WebI Report. Do you ever experience this?? Can you please let me know why it is doing this?? Any solution??
u201CThe Data (Amounts) is coming from BW to WebI are not matchingu201D
Thank you,
Raju

Hi All,
I went the MDXTEST in BW and ran the select statement based the below values-
Company Code = 3150
G/L Account = 111000
Fiscal Year = 2010
Here is the MDX Select statement, After running the below select statement, I am getting the Balance=0.00 (It supposed to show "200" as it is the correct value).
SELECT
{[Measures].[D87A2Q6N81HSAMA3OCOVQ4D1H]} ON COLUMNS
FROM 0FIGL_M20/0FIGL_M20_Q2
WHERE {[0COMP_CODE].[3150] , [0GL_ACCOUNT].[00100000111000] , [0FISCYEAR].[K52010]}
I dont why the result is showing as 0 value.
Any inputs from your side??? I really appriacted for your suggestions.
Thank you,
Raju

Similar Messages

  • Asset Balances Are Not Matching with General Ledger

    HI,
    After Doing asset year ending,balance carry  forward,,,the Asset balances are not matching with the General ledger.what is the reason?
    Kindly help me in this regard...it is very urgent.
    Thanks
    Sap Guru

    Please run ABST2 for the relevant company code to reconcile FI and AA.
    then check this out through ABST.
    Regards
    Velumani

  • FI-PCA balances are not matching

    Dear Experts,
    I have an issue where FI and Profit center account balances are not matching for period 1 for 1company code.
    I have tried the T.codes first F.5D then 1KEK and i tried with T.Code KE5T where i found the differences for 3 accounts.
    Hence requesting you all to help me out to close this issue.
    We are not using the New GL and we are with Classic GL only.
    Thanks in advance for the help,
    Regards,
    KK

    Dear KK,
    it is hard to say what's wrong. According to the transactions mentioned, I assume that you have differences on vendor/customer reconcilation accounts. You have to check with report groups 8A98 and 8A99 if the value transfered to PCA with trx. 1KEK is equal to the one shown in the report. In case the value is equal, the root cause is in the FI area (most likely the wrong clearing date is set in the open items). In case the value between 1KEK and the report per account is not equal, you should check if you have the customer exit EXIT_SAPLPC61_001 (enhancement PCA00001) is implemented and active which prevents the update of postings in PCA.
    In case this does not help, you have to open a customer message with the SAP Support to investigate the issue in more detail.
    Best regards,
    Daniela

  • GL balances are not matching with Fixed assets ledger

    Hi,
    Please suggest me regarding this...
    The issues is:when the legacy balances are uploaded in to sap there was the mistake.3 assets were entered twice(once in asset class 1250 & once in asset class 1300).It causes the GL balances are not matching with Fixed Asset balances(GL is less than FA).so now the client is asking to make manual entry by removing the recconcilation account settings and post manual entry then keep the reconcilation account as usual.They wanted to reverse the accumulated depreciation for the above 3 duplicated asssets for year 2007 & 2008.
    How can i achieve the below:
    1.GL balance was not equal (i.e lower) to FA ledger even at the time of go live(FI is lesser than FA)
    2.For this i need to post one manual entry in FI-GL with the GO-LIVE date.is it possible? suggest me how to post?
    3.After that i need to reverse the accumulated depreciation for the above 3 duplicated assets.how can i do this?
    4.After that i need to remove the above 3 duplicated assets,how can i?
    Please help me by giving your thoughts regarding this
    Thanks
    Sap Guru

    Hi,
    It is possible to post the adjustment entry from go live date provided you open the posting periods for the pervious year. (However this approach is not recommended for the following reasons - you have closed the books and must have published the results to local authorities. Adjustment now in the past year can cause some trouble from auditors etc. Secondly you are adjusting the GL balance for the last year, so you will have to complete the period end and year end closing for GL balances. So avoid kindly it)
    For your problem - Go to transaction code OASV and post adjustment entry for the current period. Also check if your field status of assets contain field for shutdown of assets. If not change your field status accordingly. Once adjustment is done you shutdown the asset so that it does not post depreciation in future depreciation runs. (this will cater to your need of eliminating the assets. If you retire the asset then you will have to deal with gain or loss on retirement of an asset. If you can accommodate this entry, then you can use this figure in the final adjustment entry.)
    Or Go to transaction code OAMK and set the recon account to post the adjustment entry.
    Reversal of depreciation is not possible in SAP. So the only way to reverse the accumulated depreciation is by changing the recon account or using OASV, and passing adjustment entry.
    regards
    Thomas

  • Asset Gl balances are not matching with Asset history

    Hi Gurus,
    I run the ABST2 transaction it is giving the error message .
    Company code Asset balance sheet values are not completely posted
    Message no. MQ554
    Diagnosis
    The asset balance sheet values in Financial Accounting are not posted
    all depreciation areas in company code WIM to be converted.
    Procedure
    Start posting in Asset Accounting under Periodic processing.
    Carry out an update run even if no documents are to be posted in the
    test run.
    Proceed

    Hi gurus,
    I executed in back ground. Still not matching.

  • New GL Implementation, GL balances are not matched

    Dear Friends,
    In my project new GL is implemented, we are facing the problem of mismatch of GL balances of Tax GL,
    Can anyone please guide how to find the differences in the same.
    Thanks and regads,
    MD.

    You could use transaction code GCAC to compare GL account balances between any two ledgers.

  • Trail Balance opening balances are not matching with previous FY clsng baln

    Hi,
    We have done GL Balances carry forward to 2009 F.Y, here GL code 1042600002 carry forwarded with 'Zero' balance and we have run the Trail balance sheet as on 31.03.2009 in T.Code ALR87012310
    Here also it is showing Zero balance for respective GL.But when we run Trail balance as on 30.04.2009 with Fiscal year 2009 for 1st period the system is showing beganing balance Rs 38213.00
    Why is system showing beganing balance? even we checkd up with T.codes FBL3N and FS10N there is also no closing balance.
    Plz advise me how to proceed in this case
    We are unable to analyse the sytem behaviour.  Could you please suggest us the solutiion.
    Thanks,
    Saisri

    Hi,
    Thank you so much
    We have carry forwarded GL balances in F.16 successfully now the problem is one GL balance has been forwarded with Zero balance but when we run the trail balance sheet (S_ALR_87012310 or F.08) as on 30.04.2009 with FY 2009 for period 1, the system is being shown opening balance.
    Plz provide me possible solution
    Thanks,
    Saisri

  • Open Item and Line Items are not matching

    Hi Gurus,
    I ran the EFT for vendor #1600109 for payment on 10/18/07.  If I run the vendor open items report (ZFI019) for today, it shows the balance net of the EFT that is $203,466 ( $263869 - EFT Value is $60,403). 
    When I ran the vendor line items display (FBL1N), it shows all the invoices including the invoices paid on the Oct 18 EFT $263,869 which is (2034,66+60,403). 
    User wants the open item report should tally the line item display.
    I will assign good points.
    Thanks for your help
    Prashanth

    Hi Gurus,
    EFT is working fine. But the Vendor Open item Report (Custom Report) and Vendor line item report (FBL1N) is different.
    We are looking a balance for a vendor as on 15th where the balances are not matching between the reports but if i run FBL1N on 18th the balances are matching.
    Clearning date is 18th
    Posting Date is 15th.
    Thanks
    Prashanth

  • OBIEE 11g Report-When drilling down to lower level, totals are not matching

    Hi All,
    I am creating a report in Analytics 7.9.6.3 , OBIEE 11g - Let’s say Budget Cost/Actual Cost based on the Date Dimension
    Have selected the Fiscal Year Dim, Fact Budget Cost, Fact Actual Cost
    FY BCost ACost
    2011 100 120
    2012 150 140
    Total 250 260
    But here when I am drilling down from Year to Quarter and Period - The values are not matching with the totals....
    FY FY Qrt BCost ACost
    2011 2011 Q1 80 100
    2011 Q2 100 90
    2011 Q3 110 120
    2011 Q4 90 130
    Total 380 440
    Fiscal Year, Fiscal Quarter Budget Cost and Actual Cost are not returning correct results – When selecting cost's by fiscal year, or filtering on a specific fiscal year, the amount returned does not equal the fiscal year total;
    when I am drilling down to Quarter and Period Level the BCost & ACosts are bumping the Numbers as above and not matching with totals
    Any suggestions?

    Check out the query in both the times.Execute against database and try to sum the data for quarter/period and compare it with Year data.
    Just try to differentiate is it a report total that is getting wrong or the data in the database table itself is getting wrong stored.
    Mark as helpful if it helps.
    Regards,
    Veeresh Rayan

  • When drilling to lower level - Totals are not matching in BI Analytics OOB

    Hi All,
    I am creating a report in Analytics 7.9.6.3 , OBIEE 11g - Let’s say Budget Cost/Actual Cost based on the Date Dimension
    Have selected the Fiscal Year Dim, Fact Budget Cost, Fact Actual Cost
    FY BCost ACost
    2011 100 120
    2012 150 140
    Total 250 260
    But here when I am drilling down from Year to Quarter and Period - The values are not matching with the totals....
    FY FY Qrt BCost ACost
    2011 2011 Q1 80 100
    2011 Q2 100 90
    2011 Q3 110 120
    2011 Q4 90 130
    Total 380 440
    Fiscal Year, Fiscal Quarter Budget Cost and Actual Cost are not returning correct results – When selecting cost's by fiscal year, or filtering on a specific fiscal year, the amount returned does not equal the fiscal year total;
    when I am drilling down to Quarter and Period Level the BCost & ACosts are bumping the Numbers as above and not matching with totals
    Any suggestions?

    Check out the query in both the times.Execute against database and try to sum the data for quarter/period and compare it with Year data.
    Just try to differentiate is it a report total that is getting wrong or the data in the database table itself is getting wrong stored.
    Mark as helpful if it helps.
    Regards,
    Veeresh Rayan

  • Totals for CKF are not matching

    Hi All,
    We recently upgraded to BI7 and we created Aggregates in the system. We have few calculated key figures (CFK) in the system. When we execute the queries they are not hitting the aggregates in the system because of the property, calculation before aggregation.
    We changed that property calculation before aggregation to calculation after aggregation then the queries are hitting the aggregates. So we moved the aggregates to BQ and BP. There the values for the totals in the report are not matching. For ex: we have value 10 for a CKF in five rows then the total in the result row should be 50 but that is not the case now, it is showing as 45 or 55 some value. The totals are not matching in all the reports where this CKF is involved.
    But when we keep the calculation before aggregation property as it is, then the total values for this CKF are matching in the report. But now the problem is that the queries do not hit the aggregates.
    So instead of going for a CKF we tried with creating a formula in the query with the same calculation as it is in the CKF, but for that formula also the total values are not matching. When we check and compared the formula calculation with other CKFu2019s in the system, we found out that those CKFs which involved the calculations such as multiplication and division the totals are not matching but if the CKF is containing addition and subtraction then the Totals are matching. This is the same case in across all the systems except in Production.
    We have testing system (BT), which is a copy of production; the totals are matching for this CKF in one report. But if we include the same CKF in some other report then the totals for this CKF are not matching in that report.
    We are unable to figure out why the same CKF with same properties and calculations is not behaving in the same way across all the systems. If anybody comes across such issue please let us know how to proceed further.
    Thanks for your patience.
    Hope for your response...

    Hi himanshu,
    If you are using Addition, subtraction with Multiplication & Division, just maintain all in the Sequence how you required using brackets.
    If you are using formula in Row & Column also try to use formula Collision.
    http://help.sap.com/saphelp_nw04/helpdata/EN/d2/02223c5f00612be10000000a11402f/content.htm
    Regards,
    Rajdeep.

  • Fund center reports Assigned values are not matching with ledger balances.

    Thanks for your Support. We have activated funds management in May-2009. And deactivated one or two times. Now the status is active.
    Now we are taking reports the assigned values are not matching with gl ledger balances.
    1. We need to update records for April- May.
    2. Records in between deactivated and activate time.
    Please suggest updating fund centers and commitments.
    Regards

    hi ELI
    i have checked the follwoing secnarios
    1. funds management deactivated.
    2. one document posted  with amount10000
    3. funds management activated.
    4. we have executed FMN0
    here no document is selected after execution.
    Please suggest what are the activities we need to do if i am wrong...
    Regards

  • How can it that half of my songs are matched in iTunes Match where the other songs from the same CD (ripped by Itunes) are not matched but uploaded?

    I started with ITunes Match a few days ago (I have the latest versions of all OS's etc)
    - The whole process took more then two days to complete for the first time.
    - Half of my songs are matched in iTunes Match where the other songs most of the time from the same CD (most ripped by ITunes) are not matched but uploaded(?)
    - Complete CD's are not recognized, they are however available in the ITunes store (songs in my library not available in ITunes are an exception).
    - The match part overall is less then 50%, which is a complete disappointment.....
    - When I activate ITunes Match on my IPod, IPhone and IPad the art-work does not load or only partly.
    - Loading songs on iOS is extremely slow... and that is definitely not due to my internal network.
    - ICloud (ITunes Match) on the apple TV stops working after every 15 seconds because it losses connection to the ITunes server....
    I am a real Apple fan for the last decade but what a disappointment is this......before I started with ITunes Match everything worked seamlessly.

    The number of Songs that 'matched' is simply a function of the current iTunes Match service process.  It is not unusual to have multiple Songs in an otherwise perfectly matched album be uploaded - often it is very possible to find the album in the iTunes Store.
    The Artwork does tend to reappear for many over a few days / weeks - however, if your library backup has all Artwork present it would be wise to save the Album Art separately and reapply to Albums not showing art work in the library grid view.
    Many of the other performance issues you mention are not typical - though during the past working week or so the Apple Infrastructure has been very heavily loaded with multiples countries having service go-live symultaneously.

  • When we purchase from iTunes the balance is not coming off of the gift cards. We have family sharing on but when my kids purchase songs they are credited to our credit card and not the gift card that is already in their account. What's wrong?

    When we purchase from iTunes the balance is not coming off of the gift cards. We have family sharing on but when my kids purchase songs they are credited to our credit card and not the gift card that is already in their account. What's wrong?

    Hi Angela1313,
    I see that you have a question about using gift cards with Family Sharing. Here is an article with some information that my be pertinent to this issue:
    iTunes Gift balances
    http://support.apple.com/kb/ht5035
    Learn more
    Learn how to send an iTunes Gift or redeem iTunes Gift Cards and content codes. If you're using Family Sharing, the credit you redeem will only be available to you. iTunes Store credit on your account isn't shared with other family members.
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • How can i fix a clip when the video and audio are not matching up?

    How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

    I would try detaching the audio and the dragging the audio to the left or right until it lines up.

Maybe you are looking for