The characteristics 0TCAACTVT (activity), 0TCAIPROV (InfoProvider), and 0T
I guru
I am SAP EHP 1 for SAP NetWeaver 7.0
SAP_ABA 701 0005 SAPKA70105 Cross-Application Component
SAP_BASIS 701 0005 SAPKB70105 SAP Basis Component
PI_BASIS 701 0005 SAPK-70105INPIBASIS Basis Plug-In
ST-PI 2008_1_700 0001 SAPKITLRD1 SAP Solution Tools Plug-In
SAP_BW 701 0005 SAPKW70105 SAP Business Warehouse
BI_CONT 704 0001 SAPK-70401INBICONT Business Intelligence Content
ST-A/PI 01L_BCO700 0000 - Servicetools for other App./Netweaver 04
I grant 0BI_ALL access under S_RS_AUTHt , I havenu2019 problem.
AND I have create a new object ZPLANT, and trying added the characteristics 0TCAACTVT (activity), 0TCAIPROV (InfoProvider), and 0TCAVALID (validity) from RSECADMIN.
I have this message : u201CCharacteristic 0TCAACTVT not authorization relevantu201D
But I must affect this special character.
francoise
Goto RSA1 and double click on the InfoObject. In the General Tab, there will be a checkbox Authorization relavant. You need to tick this checkbox . Only then you can create authorization object on this InfoObject.
Similar Messages
-
just trying to connect to apple tv for the first time and the screen just stays at 'activating' setting time and date and wont let me sign in to itunes sharing until the date and time thing is fulfilled. any thoughts on troubleshooting this issue? thanks
Hi I had same problems and couldn't understand most of the solutions on offer as I'm a bit of a Luddite. The problem seems to be getting ATV to register your network time and date details following the upgrade of software. I use a wireless connection at home and my firewall was blocking the ATV from obtaining this information. Instead of changing router settings, firmware etc (which is beyond me) I solved it this way:
1. Rather than use my existing wireless connection I connected the ATV to my iPhone personal hotspot (iPhone has 3G connection). It may be another network could also be effective.
2. ATV connected via the iPhone no problem apparently got the network time and date settings ok.
3. The previous ATV functionality was restored.
3. I then disconnected from my iPhone hotspot and re-connected to my main wireless connection. All worked fine.
It seems what you need to do is side-step the router firewall problem. Hope it works for others. -
How to get the current running activity , suspend it and then restart it?
hi everybody,
i'm new in the Bpel world so please try to help me ...
So my question is how, while a bpel process is running, can i get the activity currently running...and if there is a problem while the execution i can get where exactly did the process stopped and i could restart it?
i know these are lot of questions but any thing could help....
thanks in advancei already tried JAVA BPEL PM API i wrote the code but i didn't test it yet...
since i don't know yet how to write a hole project running in the oracle server i couldn't konw if my code is running or not???
Locator locator = new Locator("default","bpel");
WhereCondition where = WhereConditionHelper.whereActivitiesOpen();
IActivityHandle[] activityHandles=locator.listActivities(where);
System.out.println("state of an activity "+ activityHandles[2].getState()+ " " +activityHandles[2].getLabel());
but to know which activity was running when a problem occured...i'll give a look to the file you gave me about bpel fault policies....
but to restart the process with java code from specific activity...i didn't find in the API something to do this..
so may be you could help in this point???
thanks in advance -
How to keep the Viewer window active during cutting and inserting to timeline?
Greetings all, I'm a football coach looking to use FCP to do my film breakdowns. Been learning as much as I can about FCP and I've done some trial runs, so far so good, though it's a bit slow going since I am a football coach after all . Anyhow, current issue is I want to be able to take a game film and cut it up into plays, each play is a separate clip. I'm getting it to go fairly quickly, I have the film open in the Viewer, just mark in and out and I've been dragging the clip down to the timeline, one after the other, using the insert option. I'm now trying to use the F9 key to have it insert to timeline without me having to drag it. It works except the problem is that once the clip is inserted to the timeline, the Canvas window becomes the active one rather than the Viewer. So if I keep hitting 'I' and 'O' and F9, it won't be cutting up the film since the Viewer isn't active. As it is now I'll need to remember to click the mouse in the Viewer window after each insert in order to have that active and be able to resume my I,O,F9 routine. Is there a way around this? It seems like a small issue but I can't find any support on it and it could end up being a massive headache where one little slip up means a lot of wasted time. Am I explaining this clearly and does anyone have a solution? Any other thoughts on football video editing that people are curious about or have seen that might be helpful? I appreciate your time,
GrouchOr a third way would be (if you only cut out small pieces of the overall footage):
Drag the whole clip in to the timeline. Mark in and out for the parts that you DON'T want.
Hit the Delete button (if you have an extended keyboard or Shift-Backspace, if you are using a Macbook (Pro).
Rienk -
please help trying to reactivate on another computer and adobe is saying this number i already registered,but the # is not showing in my account..Like i have proof of purchase and serial but adobe is saying" I dont knw what you talking about" .Its like making a purchase from a street dealer with stolen goods...whats the prob?
Who were you talking to at Adobe? You'll have to get help from web chat since serial number issues can't be handled in a public forum. Here's a link:
Adobe ID, sign in, and account help
If you're not happy with the agent you're talking to, insist on chatting with a supervisor. -
How to change the characteristics of a Batch
Dear All,
We have maintained a batch sort sequence based on Batch Manufacturing date.
But now customer wants the batch to be sorted out based on Batch Number.
How to change the Characteristics from Batch Manufacturing date and Batch Number?
Please do suggest.
For example, we have two characteristics assigned to the Class One is Manufacturing date and another is Batch Number.
How system will sort out a batch based on these two logic.
Kindly explain.
Regards,
MullairajaHi Mullai,
I hope you know what do you mean by "Dependencies" in variant configuration. These are created for automatic update of characteristic values. If you want to delete the characteristic from the class, please do teh following.
1. Find out that there are any dependencies assigned to this characteristic. If so remove the assignment
2. Then you have to check if this characteristic is used in any dependency in the code. If so, find the implications of the same.
In case, you dont know what is dependency, may be they are not used in your project. In this case, you can just remove the characteristic from the class.
It has got one effect.
At present, a configured batch will have this characteristic. If you go to the batch master in change mode, then the old classification will be replaced by the new classification. So the deleted characteristics will not be available to you anymore. I hope that is fine with you. If this is fine, then you dont need to worry about removing the characteristic from the class. -
Active Directory Integration and home folder mounting
Hello,
I've set up a G4 tower with Tiger 10.4.4 and bound it to our AD domain. Authentication works perfectly, however the home directories of the users (on smb shares on windows servers) do not mount consistently. At first I thought that it was working for administrative users but not for regular users, but one of our test accounts which has no admin priv's works perfectly. It does seem to work consistently for admins, though.
Most regular users are given a local home directory. Has anyone seen this? Any thoughts? Is there any particular log file that I might check for clues?
I'll try get in a little later to post the output of dsconfigad -show , which might help...
Anyhow any help will be appreciated..... thanks!
-JonathanI have been working on doing this as well. If I set the 'mount home directoy' property in the user in Active Directory Users and Computers it has worked for all users and I did not have to specify anything in the AD connector on the Macs.
Robert -
Active Directory Access and Synchronization with R/3
Dear All,
What I have understood till now about users being maintained in Active Directory is: there are no Roles in Active Directory, users are to be assigned to Groups in the Active Directory.
My requirement is: I have to maintain the users in Active Directory, and ensure they are in sync with my BW system CUA.
First question is: Can we maintain users and roles in CUA?
If I want to synchronize between Active Directory and CUA, do I always need the EP to play a part? If not, what are my alternatives?
My second requirement is: I have to get the users and roles ( partly from Active Directory via LDAP Connector, and partly from BW CUA ), the challenge being, I am getting users from the Active Directory, how will I determine the role it is assigned to in CUA?
I will have the group of the user from Active Directory, where and how do I determine what is the role assigned to this user?
Please suggest.
Regards,
Prosenjit.Prosenjit,
My apologies, I didnt really understand your scenario.
For your query -- I have to fetch the users from AD, check their roles, and display some relevant data.
You create the role in portal as assign it to the group (group can be anything either AD Groups, CUA Roles which would be groups on the portal or simple portal groups). Now the role will display the reports as links in the TLN and Detail level navigation however it would only be the authorizations which control what data will be visible to the end user.
Syncronization between AD - ABAP (CUA) would allow you to sync the user details between both the data sources roles dont come into the pitcure as far as I know and have seen (might be wrong also)
How will I conclude to which role the user is entitles in the BW side, just by getting the group?
I suppose you must have developed and then published reports on the portal. You will have to create a user - report matrix and then assign users to approproate groups.
Do clarify the requirement in further detail if this doesnt solve your issue. -
I am traveling to India, north and south, with my ipad 2, G-3. It is activated by AT and T. How do I use it in India? Do I need to purchase a sim card there and if so what kind? Would they be available in the Delhi airport or where else in central Delhi?
Also in order not to pay a fortune for the service is it better to acquire if needed a SIM card only once there?
Check with your carrier about roaming charges. They are usually prohibitive. Best to get a local SIM. -
I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.
wesb
What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
Let us go through the typical drill so as to take nothing for granted.
1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
school or company network?
2. Are you running the program as Administrator and is there any "domain" account involved?
3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
Let us start by ruling in or out any of the above, and then we can decide what next.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR -
I currently have a runbook running every hour to attach Incidents Templates to Problems. I would like to just add a runbook activity to the Incident Template to activate the runbook, and only link that Incident to the problem it needs to be attached to.
I don't know how to set-up my Initialize Data activity in my runbook to load the calling Incidents GUID though.
I'm very new to Orchestrator, so please be detailed in your directions.
The way my runbook works now is, I make my incident templates have the PR # they are for in the Alt Contact Block. My runbook searched for that, and then loads the PR# it has there and creates the relationship between the two, and then deletes that PR# so
it doesnt hit on the next search.
I would like my activity that calls the runbook to pass the Incident GUID to the runbook, so my runbook only has to query the PR# included in the incident, and create the relationship that way.
Thanks for any help you can provide.This might help:
Working With Relationships in the SCSM Orchestrator Integration Pack
Basically, you'll receive the ID of the runbook automation activity from Service Manager, which you can then use with the Get Object and Get Relationship to get the runbook activity object, then get the incident object related to it. I realize this is confusing,
but there should be more info out there to search on as well. Hope that helps.
Noah Stahl | Automys |
Downloadable Microsoft automation examples and solutions -
Help
I dont understand when i download a movie or tv series on my mac book air i get this error message after buying it! its iTunes while downloading a movie it say error please check that the connection to the network is active and try again what does this mean i have an internet connection !!!Hello.
Certain types of software can affect the way a computer sends and receives information from the Internet. This article may help you resolve the issue:
Information about error -50 and downloading videos
http://support.apple.com/kb/TS1583
If it did not work, contact iTunes Store via (http://www.apple.com/support/itunes/store/) and/or Apple Tech Support via 1-800-275-2273. -
Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa KHi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin -
I'm getting the grey screen during start up and can't boot the computer - MacBook Pro with lion.
I did a command r after doing some research but got nervous that it would automatically wipe my hard drive and reinstall OS.
I was nervous because it asked me for language for software use before any options were presented (such as repair via disk utility). It looked similar to an OS install.So I powered off....Is there a risk at command r will result in wiped HD without me actively making that choice?Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless. -
I did set up the password when I got the phone and iPad months ago but never turned it on. Now it is asking for the passwords for both my iPhones and iPad and I cannot select not the have the passwords active.
If you do not want to use passcodes, why don't you just go to Settings > General > Passcode Lock and delete the passcode and set the lock to OFF. That will eliminate the problems all together.
Maybe you are looking for
-
How do I use a FF column as the input parameter to an Oracle Function?
... and have the value returned by the function be written to the target DS. I am opening a FF and grabbing an integer from a column. I want to map an output column in a temp table to be the returned value of a function call that uses the input colu
-
How do I delete the Yahoo button on the navigation line?
On the navigation line there is a little house, "Yahoo". How do I delete it forever? Since I upgraded Firefox, every time I turn on the computer it opens with a Yahoo Homepage. Yahoo is so very invasive, worse than a virus . I want Google as my home
-
Temp File Name Schema in Receiver File adapter
Hi, I have a scenario where i have to write the file in the temperaory location before writing it to the FTP loacation, I have selected the Processing Parameter as "Use Temperory File" but when the file gets created it is padded with the Message Id,
-
Checkbox and Buttons in a JTable's row
Hi, how do i put an Checkbox or a Button in a JTable row? When i try to insert any element to a JTable's row it automatically converts it to string. How can i solve this? Many thanks, Nuno Almeida
-
Hi All, While creating service sales order price field is grayed out i can't able to enter price kindly update me any setting need to active for this. Ramesh