The dreaded "sample rates do not match" error: imac

Greetings,
I am getting the "samples rates do not match" error when I try to record in an audio file. I see a lot of stuff online about fixing this on windows, but haven't found the solution for my late 2012 iMac.
I've made the audio file stereo, 24 bit, 48kHz.
I've checked the audio midi setup and both the mic and the speakers are set to 2ch 24 bit 48kHz.
Still get the error....
What am I missing?
Thanks!

What audio interface are you using? You need to make that that is set to 48k as well.

Similar Messages

Audio sample rate does not match (HDcam to dvcam)

I'm trying to import clips and keep getting this message:
"The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape."
Footage was originally shot on HDCAM and transferred to DVCAM elsewhere. Using FCP 5, am importing via firewire from a Sony DSR-11 deck. Using DV NTSC 48kHz Anamorphic as capture settings (though I've tried everything that I thought might possibly work with no success). The audio does not seem to drift over the course of several 5 minute or so clips. Clip settings show audio at 48 kHz (don't know if that's from capture settings or from actual data). Seems to me all audio should be 48 kHz 16 bits, so can't figure out what's going on. I have to export an EDL for the project to be finished in HD. Read some similar threads that ended in December, seemingly without much resolution. My broader concern is why this is happening; my immediate concern is do I need to worry about this right now since the media files will need to be recaptured in HD anyway. Any thoughts?
Thanks

A little more info. I'm having this problem on 4 tapes (from different cameras) that were transferred to DVCAM in a squished format to appear full screen on a 4x3 monitor. Video that was letterboxed and I can bring in with the standard DV NTSC capture settings does not have this problem. Still have the problem if I try to import the clips from the squished video with standard settings. Any thoughts?

Sample rates do not match

Hi.
I am trying to generate a sweep waveform with 48KHz sampling frequency. However, I see that the lower frequencies have a 48KHz sampling frequencies but the higher frequencies have a bad sampling frequencies.
Can someone tell me how to generate tones with the same sampling frequencies?
It is the same issue with higher frequencies even if the waveform is single frequency (example 9khz waveform cannot be generated at 48khz freq). I am using a trial version Adobe Audition CC Build 732 (64 bit)

Generate Tones uses an entirely internal timing system, and effectively isn't influenced by any clocks at all. But even if you assumed that an internal clock drifted, it wouldn't account for anything like these apparent discrepancies. As an example, consider a 48k clock with a 2% error - which is way worse than you'd ever find these days. If you counted the number of samples over a millisecond, that would, unless you were extremely unlucky, still give you 48, because a 2% error is only 0.96 of a sample over that period.
But, if you opened up this recording in Audition as 48k, it would display it just the same as internally generated tone - so you'd get 48 samples anyway. What would be wrong when you played back the file (using an accurate sample reference for the playback) would be the pitch of your recording, and if it was a good drift, you could even end up with wow and flutter!
The answer to the question about recording external sources though is that it depends... If you have a S/PDIF input, it will use the clock from that (or you get a huge glitch when the sample rates drift to a one sample error). Same thing happens with a USB mic - the sync has to be established from the A-D clock source in the mic, and with a cheap example, that could be even worse than a computer-generated clock. So, it's only non-digital devices connected to the on-board sound device that are subjected to the vagiaries of the internal clock.
And yes, it's because I've considered this in some depth that I'm just a little sceptical about what's happening with the OP, if you see what I mean...

Logic Sputtering, CPU spiking horribly for no apparent reason, gives MIDI sync error even though the computer is set at the same sample rate.

It's literally making it impossible for me to produce anything, after what seems an arbitrary amount of time in Logic my audio will begin to distort and I will get errors stating that my MIDI sample rates don't match, but they DO and it will spit out some seemingly random sample rate from nowhere. My CPU usage will spike and even my cursor will jitter across the screen until it stops stuttering. The audio problem seems to only be caused by Logic but will sometimes continue to occur in other applications after Logic is closed.
How on earth do I fix this? It's making it impossible for me to work on remixes that I have to have finished soon, I have deadlines and I simply can't work in these conditions... the audio doesn't work.

That sample rate error comes up when Logic gets out of sync internally, you will sometimes also see a MIDI/Audio sync error. MIDI timing is taken from the audio driver/sample rate, it's what enables MIDI to stay in sync with audio, when the audio/MIDI engines get out of whack these are the kind of errors that pop up. (there doesn't have to be any MIDI in the song) Can be caused by bad drivers, interference from another running program, synchronization settings, bad or incompatible plugins!

HT3702 When trying to purchase an app an error message comes up saying the info I entered does not match my banking info. The odd thing is, the $1.00 hold is shown immediately on my credit card acct. , so I obviously did enter it correctly. Tried 5 times.

When trying to purchase an app an error message comes up saying the info I entered does not match my banking info. The odd thing is, the $1.00 hold is shown immediately on my credit card acct. , so I obviously did enter it correctly. Tried 5 times. Any suggestions

When trying to purchase an app an error message comes up saying the info I entered does not match my banking info. The odd thing is, the $1.00 hold is shown immediately on my credit card acct. , so I obviously did enter it correctly. Tried 5 times. Any suggestions

TS1717 when trying to import cd the following message appears "the current encoder settings for bit rate and sample rate are not valid for this file"?

Trying to import cd when this message appears "the current encoder settings for bit rate and sample rate are not valid for this file". Any suggestions?

Thanks so very much. I chose MP3 and Download and it is working beautifully. Have a wonderful day and it is so nice of you to get right back to me. I'm trying to cut a DVD for my grandson's grad party and I got most of the photos and didn't have any music since I lost everything in a clean install. Could hug you!

The selected combination of bit rate and sample rate is not allowed.

I've always burned my purchased CDs into iTunes using a AAC 320 kbps and 48.000kHz. Now when I select that option in iTunes 9 I'm getting a "The selected combination of bit rate and sample rate is not allowed." pop up screen. So is it impossible to burn my albums in a 320kbps/48.000 AAC format?. I had no problems in previous versions of iTunes using this setting. I guess I might have to switch over using a MP3 import setting instead.

Audio CDs are encoded with a sample rate of 44.1 kHz. Ripping them at 48 kHz requires resampling and does not improve the quality. Unless you have a special need for 48, use 44.1.

The control chart in the sampling method does not match the insp. char. Mes

The control chart in the sampling method does not match the insp. char.
Message no. QD240
how solve?????

You need to compare 'requirement for control chart' and 'control indicator of insp. characteristic'.
1. Requirement for control chart
QCC0 > Quality Planning > Basic Data > Sample, SPC > Statistical Process Control > Define Control Chart Type
See detail for your control chart and check 'requirement' in characteristic type screen area.
2. Control indicator of insp. characteristic
QS24
Check 'control indicator' is suitable for requirement.
Regards, Do Wook KIM

The SYSVAL table entry for the database version (16) does not match the required version

We upgraded from Tidal Enterprise Scheduler (TES) 5.31 to 6.1 on fresh Windows x64 2008 R2 servers. I did a fresh install but our DBA restored a copy of our database from pre-prod which was at 5.31. I get the error below. Note, SQL went from 2005 to 2012 during this upgrade. Do I need to change a value in this table to reflect the SQL change?
[04/29 12:47:14:198]:TIDAL Enterprise Scheduler: version 6.1.0.133
[04/29 12:47:14:198]:Java version: 1.8.0
[04/29 12:47:14:198]:Java Virtual Machine version: 25.0-b70
[04/29 12:47:14:198]:Start Time : 04/29/14 12:47:14:198
[04/29 12:47:14:198]:----------------------------------------------------------------------------
[04/29 12:47:14:198]:Database URL :jdbc:sqlserver://SQL2012-Host:1433;responseBuffering=adaptive
[04/29 12:47:14:198]:Database Driver :com.microsoft.sqlserver.jdbc.SQLServerDriver
[04/29 12:47:14:198]:Maximum number of log files = 100
[04/29 12:47:14:198]:Added a LogFile called 'RegularFile'
[04/29 12:47:14:198]:LogManager: setting default log
[04/29 12:47:14:214]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:14:495]:MessageBroker: Instantiated TcpTransportServer (URI = tcp://0.0.0.0:6215)
[04/29 12:47:16:975]:Retrieved a LogFile called 'RegularFile'
[04/29 12:47:17:272]:The SYSVAL table entry for the database version (16) does not match the required version (23). Shutting down.
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:
[04/29 12:47:20:282]:Shutting down the application

I had this error last night while applying a patch to 6.0. However in my case the version was 21 versus a required version of 23.
As far as i know 6.1 is not compatible with the 5 db schema, so you will need an update / migration plan for the db also.

The authentication information provided does not match our records. Please verify your personal information and try again.

i keep getting this error when i try to change my password.
the authentication information provided does not match our records. please verify your personal information and try again.

I have totally forgotten the answers to "security" questions. Please help - I am 84 years old and somewhat lacking recall intelligence about what I might have declared earlier.
<Personal Information Edited by Host>

The https URL hostname does not match the Common Name (CN) on the server.

Hi,
I am getting the following error while trying to use https with our self-signed certificates.
javax.xml.ws.soap.SOAPFaultException: Marshalling Error: The https URL hostname does not match the Common Name (CN) on the server certificate. To disable this check (NOT recommended for production) set the CXF client TLS configuration property "disableCNCheck" to true.
The above error is the error I get, when I try to use the Web Services using https.
I have added the following lines in cxf.xml but it still doesn't seem to work correctly.
<http-conf:conduit name="*.http-conduit">

<http-conf:tlsClientParameters disableCNCheck="true" />
Kindly let me know on what would be the issue here?.

I had P2V'd a SQL 2008 server and was having this issue. I tried everything I could find to get the affinity corrected; setting the Lock Pages security policy, trying the affinity commands in Single User mode, etc.
Then wrighbar's response got me headed in the right direction, but I ran into an issue where the previous engineer had set the Physical SQL server to have affinity on procs 9-16 of a 16 proc box, I could only set up to 8 procs on my VM. After searching
for a while for registry keys or config files that might be editable to change the affinity I couldn't find where SQL got that information from. Finally it hit me, maybe it's stored in the master or msdb datatbases.
SOLUTION: I was able to go back to the original Physical machine, change the affinity settings there, Stop SQL on both boxes, then copied MASTER, MODEL, MSDB, TEMPDB from the original Physical machine to the new virtual machine. All services started
OK on the virtual machine now and affinity was set the way I needed it.

Oops! The email or password did not match our records. Please try again.

On Sunday March 30, 2014 I was trying to purchase a new computer from the Best Buy website. I added the computer to my cart and clicked checkout. I was asked to log into my best buy account and after clicking sign it I was informed that I need to update my password. I created a new password and it took me back to MyBestBuy page. I clicked on the shopping cart again and clicked checkout. It again asked me to log in to my account. This time I was given an error: Oops! The email or password did not match our records. Please try again. I changed my password two more times after that and still had the same problem.
I finally called Best Buy and the lady I talked with sent me a reset password request which did not work. She informed her supervisor and was told there are issues with the website and ordering online. She tried to order the items in my cart and could not proceed as well.
I was then transfer to the Sales department where Jacqueline assisted me in getting my order purchased. She also sent me a request to reset my password but it is still having the same problem. I change the password and the next time I log it I get the following error: Oops! The email or password did not match our records. Please try again.
The worst part about this whole experience was on Wednesday 04-02 I received an email from Best Buy that stated Please call us, there is a problem with you order. I called the 1800 number listed on the email and spoke with an associate who informed me the reason for the email was I did not have sufficient fund for the purchase that I made today. The problem: I did not make any purchase on 04-02. The associate asked if I would like to be transfer to the fraud department and I said yes. The woman that I spoke with was very polite and we cancelled my account and I have a new card on the way. (I forgot to mention that I used by Best Buy Credit Card)
I think that there is a serious issue with your website and because of the problem my credit card information was stolen.
I have been a loyal best buy shopper buying all of my electronic from TV's, cellphones, computers, movies, etc. After this experience I have lost my confidence in your website and it ability to keep my information safe.
P.S. I have already tried:
Logging out of the Best Buy website
Cleared Catche
Tried a differnet browser

Hello KC-2537,
Welcome to the forum!
I can’t begin to imagine how terrifying it’d be to discover an unrecognized purchase on your account, and I’m sorry for any frustration this caused. We take your privacy very seriously which is why you were asked to create a new password when you attempted to log into your account to purchase the computer you wanted. Recently, we’ve implemented a new and stronger security measure that asks our customers to choose more intricate passwords for their www.BestBuy.com accounts. It sounds like your previous password didn’t meet these new requirements and as we wanted to make sure your information is as safe as possible, we asked you to reset it. However, it certainly wasn’t our intention to lock you out of your own account.
After looking through your account using the email address attached the forum, I’m glad to see that the computer Jacqueline assisted you with ordering was delivered to your local store earlier this week. However, I’m worried about your account if it is still locked. As I want to make sure you are able to access this, I’ve sent you an email to reset your password that you should receive shortly. These links are only valid for a short period of time, so let me know if you’re unable to access the message right away. Also, if you don’t receive it, please click the link provided in our Help Center.
If you are still experiencing issues with your online account after using the email or link I’ve provided, please don’t hesitate to let me know. Additionally, I suggest you continue to monitor your credit card and notify the card issuer and local authorities if you notice any further unrecognized activity.
Best Wishes!
Alex|Social Media Specialist | Best Buy® Corporate
Private Message

The Dreamweaver client version does not match this version of the BrowserLab client

Cannot use BrowserLab
I have followed the upgrade instructions on this page
http://labs.adobe.com/downloads/browserlab.html
Deleted the MeerMeerDW folder, downloaded and installed the latest MXP files.
But when I try to use BrowserLab from Dreamweaver after program loads error message says
"The Dreamweaver client version does not match this version of the BrowserLab client.
Please download and install the latest version of the Dreamweaver MXPs"
I have tried several times, even tried removing the extensions from Extension Manager, quiting the program,
deleting the MeerMeerDW folder, restarting Extension Manager and reinstalling the MXPs, then starting Dreamweaver
and trying the Preview in Browser>Adobe BrowserLab. Same problem, program loads and then get error message.
Macintosh OS 10.5.8
Dreamweaver CS4
Extension Manager CS4 (2.1.115)

Hello toni7,
I'm sorry to hear you're having problems. Are you prompted to replace the existing extensions when performing the installation? The error message you are receiving when using the service is expected if the new versions of the extensions are not installed.
What is the version number of the extensions displayed in Extension Manager?
Are you deleting the MeerMeerDW folder in the user library prior to installing the new version of the extensions? And just to be sure, are you logged in as the same user? [(user)\Library\Application Support\Adobe\CS4ServiceManager\extensions\MeerMeerDW]
Do you have more than one MeerMeerDW folder at the path above?
Also, be sure that all adobe applications are closed before trying to install the new extensions. I would also make sure that CS4ServiceManager, Extension Manager and Dreamweaver are not running when you delete the MeerMeerDW folder and prior to installing the updated extensions. Go to Applications\Utilities\Activity Monitor and Quit Process on any of those three running prior to installing.
It's critical that the MeerMeerDW folder is manually deleted, rather than removed using Extension Manager before updating the extensions.
Best regards,
Corey

The product key entered does not match any of the Windows images available for installation. Enter a different product key.

how do you manage to install windows 7 when the message on the screen is "The product key entered does not match any of the Windows images available for installation. Enter a different product key. "

That's a really helpful answer and not smug at all, thanks Carey.
I just downloaded a DVD image from my university's MSDN Academic Alliance program, named "Microsoft
Windows 7 with Service Pack 1 Debug/Checked Build 64-bit (English)", which I wanted to use to install over an existing 32-bit version. I thought the install screen was giving this weird unskippable error described in the OP before I even entered
a key because the 32-bit key I had used on the HDD was somehow interpreted to be used in an upgrade, but no. Even after I wiped the hard drive, this error persisted.
Guess I'll go Google some more on how to install my legit copy of Windows, because this self-serving shit sure isn't helping.
edit: IF YOU GOOGLED THIS AND ARE STILL LOOKING FOR YOUR ANSWER, CHECK HERE:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404b-9b7f-2065bdb91011

Why the doc total amount is not matched with the total item line amount?

Hi,
Recently when i try to update something in sales order via my add-on, i got an error said u201CThere is a difference between the document total and its components. [ORDR.DocTotal][line: 0] Iu201D Then i checked the sales order in SAP B1, I found the document total amount was not matched with the item line total amount. Actually the item line is quite simple, there is only one item line with qty 1. How comes the document total could be different with the amount from item line? I know the document total amount is a read-only field which is calculated automatically by SAP. This is really weird for us, we don't know how this happened.
Has anyone experienced similar situation like mine and how this happens?
Thanks,
Lan

I am having this same issue and I have additional information.
I am on ver. 8.8 PL 16.
Periodically (mulitiple times a week), when a Sales Order is created, the Doc Total amount is -zero- when there are clearly items that have a price associated with them. This causes an error when Adding the document. Sometimes, I can just change the quantity of one of the items, which forces the Doc Total to update. Most of the time this does not work, though. I end up having to restart the SAP client and then everything begins to work as it should.
This behavior is occuring on mulitple machines in our office.
Earlier in this thread, Rahul mentioned that they currency rounding was turned off and that this could be part of the problem. In fact, we were having issues with Currency Rounding and did turn it off not long ago. Rahul, can you explain better what you meant by "give the proper amount so that you can overcome the error..."
Randy Davis
Denver, CO
Edited by: Randy Davis on May 16, 2011 2:01 PM

The dreaded "sample rates do not match" error: imac

Similar Messages

Maybe you are looking for