The expenditure organization is not active for Expense Report

Greetings to all,
We ran into a problem, where a person submitted an expense report with project related information. The exp report gets an error in the workflow. When we look at the workflow error message is: This expense report failed payables validation.
When we look at the notification for error message, shows the expense report and for the line that has a problem, gives the following error message:
"The expenditure organization is not active."
We check the org in HRMS, we look up the org and has the following setups:
HRMS-->work structures--> organization (query the cost center)
then when looking at the cost center has the following:
under organization classifications:
Project Expenditure/Event Organization
Project Task Owning Organization
HR Organization
Then looking at hrms-->organization--->hierarchy
query for hierarchy-->we get our hierarchy,
then under organization-->query again for our main org, we see then the subordinates which we see the cost center again.
Everything looks good our point of view.
If have researched this issue on ML and have read the following notes: 423267.1, but this does not resolve our issue.
If someone has encountered this problem, can you share the additional steps to troubleshoot this issue.
Thanks in advance for any help on this matter.

All --
It turns out that the employees were on LOA on the dates that they were charging time. So the message didn't really describe what the actual problem was. What happened is that the employees had gone on LOA and then returned to work, but HR had not yet returned them to active assignment. They entered their timecards as they normally had, but they did not pass validation because they weren't active on the dates they were trying to charge.
I would have looked at the assignment earlier in the process if the error message had been employee-oriented instead of referring to the org, but at least the problem is solved. Thanks for everybody's input!
Joe

Similar Messages

  • The expenditure organization is not active

    Hi All-
    I've got a strange issue importing timecards from our external system. Approximately fifty records have failed transaction import with an error message of 'The expenditure organization is not active.' The error message makes no sense because I've verified the following:
    The expenditure org is active (no date restrictions)
    The expenditure org is classified as both Project Expenditure/Event and Project Task Owning
    The expenditure org exists in the hierarchy
    I couldn't find any direct hits on Metalink, so I'm wondering if anybody might suggest other possible issues that I'm not seeing? Any other setups I should check?
    Thanks in advance,
    Joe

    All --
    It turns out that the employees were on LOA on the dates that they were charging time. So the message didn't really describe what the actual problem was. What happened is that the employees had gone on LOA and then returned to work, but HR had not yet returned them to active assignment. They entered their timecards as they normally had, but they did not pass validation because they weren't active on the dates they were trying to charge.
    I would have looked at the assignment earlier in the process if the error message had been employee-oriented instead of referring to the org, but at least the problem is solved. Thanks for everybody's input!
    Joe

  • Invoices: the Expenditure Organization is not defaulting

    Hi All,
    Entering project related invoices in the invoice form, In Payables,
    navigate to either Invoices => Entry => Invoices or Invoices => Entry =>
    Invoice Batches, enter project and task information
    BUT
    the Expenditure Organization is not defaulting into the
    form.
    Do you know why this is happening.
    Regards
    Anoop

    You may get what you need from the profile option "PA: Default Expenditure Organization in AP/PO"
    Stephen

  • E-Mail is not sent for "Expense report reimbursed"

    Hello,
    When the expense report status changes to "Reimbursed", an email should be sent to the employee. But it is not being sent.
    FYI, both in Business Configuration --> Fine Tune Activity and Personalize --> My Data setting of employee, the email option is enabled for E-Mail Type "Expense report reimbursed". But still email is not sent out when the expense report is reimbursed.
    Best regards,
    Hari

    Thanks Joachim! Just to let others know, here is the reply I got in the incident.
    Your tenant is with SAP Cloud for Travel and Expense release 1311. In this release your finding is valid that some system glitch causes the e-mail not to be sent for reimbursed expense report. This issue should have been fixed in release 1402. Because now the upgrade to release 1402 has begun and all tenants will be upgraded to 1402 in several weeks, we may not fix the issue on 1311 tenants. Anyway the main features of handling expense reports in the system should work as expected.
    Best regards,
    Hari

  • HT4993 I put my fingerprints in for set up, but the touch ID still not activated, how do I turn it on?

    I put my fingerprints in for set up on my 5S, but the touch ID still not activated, how do I turn it on?

    http://support.apple.com/kb/HT5883

  • Photos have a ? in the top left hand corner.  When I click to reconnect files are found but the reconnect button is not active

    Mostr f my photos have a question mark in the top left hand corner.  When I go to <file> and click on reconnect the missing files are searched for and found but the reconnect button is not active. What can I do.  I m unable to edit these photos.

    jeglee
    What version of Premiere Elements are you using and on what computer operating system is it running?
    It sounds like you are in the Elements Organizer that came with your version of Premiere Elements.
    That ? in the top left corner of the thumbnail indicates a file that is no longer in the hard drive save location as it was
    when a copy of the file was included in the Elements Organizer.
    1. Do you know that the file(s) still exist? Could you have moved, deleted, or renamed file/folder involved? Can you go
    to the hard drive save location for the file and actually find it there?
    If you are working with Photoshop Elements instead of Premiere Elements, you have posted in the wrong forum. In that case, please post your thread in the Adobe Photoshop Elements Forum or wait for a moderator to see your thread here and move it from here to there.
    Photoshop Elements
    If not, we will continue our exchanges of information here in order to resolve your issue.
    Thank you.
    ATR

  • Invalid Locator Segments-The expenditure organization information is invali

    Hi Gurus,
    Onhand quantity import from legacy to Oracle apps(11.5.10) is failing with the folowing error in the interface table, mtl_transactions_interface.
    Error Code: Invalid Locator Segments
    Error Explanantion: The expenditure organization information is invalid
    I did import successfully during my intial testing cycles though. But now after a month, trying to load the onhand quantities again, I am getting this error. Some setups might have been changed or any thing else could cause this error to show up?
    We are using project manufacturing and locator control as "Dynamic". I am using account alias receipt to import onhand balances.
    Thanks in advance,
    Kaju

    Hi,
    Please also see these docs.
    Note: 837730.1 - MTI Interface "Invalid Locator Segments" Error
    Note: 823164.1 - "Material transaction API returned error(Invalid locator segments)" Error when Issue Materials Across Workorders in CMRO
    Note: 110424.1 - Unprocessed Transactions/Closing INV Accounting Period FAQ
    Note: 210900.1 - Locator is Invalid or Missing for this Item/Organization/Subinventory Combination
    Regards,
    Hussein

  • Bridge will not now let me use camera raw, though I had been using it every day.  It says that "the parent application is not active.  Bridge requires that a qualifiying product has  been launched at least once to enable this feature."  What am I to do?

    Bridge will not now let me use camera raw, though I have been using it every day.  It ways that "the parent application is not active.  Bridge requires that a qualifiying product has  been launched at least once to enable this feature."  What am I to do?

    Usually this points to having some kind of earlier trial version still installed on your system. However without more details you are not likely to find an answer. Try this for a start:
    How To Get Help Quickly

  • HT3149 iPhoto 09 When I click on the preview pane to move a photo into edit, it shows up black and the edit buttons are not active.  How do I fix that?

    When I click on the preview pane to move a photo into the edit pane, there is no image just a black square and the edit buttons are not active. A few images in an event will move to the edit pane but most will not.  I cannot work with those images that do not enter the edit pane..no attaching to email, make a card, slideshow, etc.

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • AFS material-/mrp-status not active for plant.

    Hello Everyone
    I am facing an issue while executing the sales order
    Issue  :AFS material-/mrp-status not active for plant..
    CAN ANY ONE RESOLVE THIS...
    Regards,Rajneesh

    Hi Rajneesh,
    Tht prb might be the material master.
    Goto Material master, select AFS MRP View and activate/ press the AFS MRP status button and save.
    Reward with points if it is helpful
    Kishore

  • Form name PYXXFO_SAP_TIM_99_0001 not active for form SAP_TIM_99_0001

    Hi Experts,
    I am on ERP2004 SP17 EP6.0 SP20. I am trying to implemet Time Statement application. I am getting the error
    "Form name PYXXFO_SAP_TIM_99_0001 not active for form SAP_TIM_99_0001" on portal when trying to access the time statement.
    Where can I activate the relevant form on R/3 side? I appreciate your help.

    Hi Barin,
    Thanks for replying to me. I activated the form SAP_TIM_99_0001 in hrforms.
    Now I am seeing the error <b>"Unable to generate form PYXXFO_SAP_TIM_99_0001</b>      
    But I do not see this form in hrforms? where can i find this form?
    regards!

  • Safari browser connect me with the page I want, but the page itself is not active - how to unblock it?

    Safari browser connect me with the page I want, but the page itself is not active - how to unblock it?

    Try any or all of these standard fixes.
    Go to Settings>Safari>Clear History, Cookies and Data or Cache. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Quit Safari. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • Message LP327 WM Not active for plant

    Dear All,
    We have just upgraded our SAP system from 4.7 to ECC6.0, While doing a repetitive manufacturing backflush a warning has appeared (LP327 WM Not active for plant), the statement in the warning is correct, the plant is not active for WM, I was wondering if this particular warning could switched off.
    Kind Regards
    Mark Summerbell

    Hi Mark,
    The message is triggering from std SAP program RLLT0R00 and is defaulted to Error message.We cannot change that to warning message in that program.Pls try to search suitable OSS notes for the  same.It looks like Extent WM is active for your plant so the message is issued.
    Pls see below attached details of Extent WM
    Reg
    Benny
    Extent Warehouse Management
    Key that controls the use or the degree of activation of Warehouse Management for a storage location. The key controls whether bin stock is to be managed in the MM-WM component.
    The field can have the following settings:
    blank = normal management of stock in bins. The full range of functions provided by the MM-WM component is available.
    1  = Lean WM for inbound or outbound deliveries. The delivery or pick is executed using transfer orders (from MM-WM). These transfer orders, however, do NOT update bin stock in Warehouse Management.
    2  = For this storage location, you can use normal SD picking in combination with doors and staging areas. In this context, no Warehouse Management functions are activated.
    3 = Lean WM for outbound deliveries. Picking occurs using transfer orders (from LE-WM). However, these transfer orders do NOT update bin stock in Warehouse Management.
    4 = Lean WM for inbound deliveries. Putaway occurs using transfer orders (from LE-WM). These transfer orders do NOT, however, update bin stock in Warehouse Management

  • The specified index is not valid for the given resource

    I am trying to follow the tutorial on how to get Labview working with Solidworks and the demo CNC robot that the example comes with. After I deploy all the axes and my computer and the assembly file I try and switch the scan engine to active mode but it won't let me. It pops up with an error;
    "An error occured while attempting to switch the I/O scan mode. The specified index is not valid for the given resource".
    I'm just trying to do a basic straight line move with one axis. Does anyone know how I can fix this? I updated softmotion with Sp1 already and did all the recommended updates.

    I talked to some of our developers to get some more ideas for this error. Try the following:
    Go to the file path C:\ProgramData\National Instruments\DeploymentFramework (it is a hidden file so you may need to change your settings to see it)
    Delete the contents of that folder.
    Restart LabVIEW
    Redeploy your axes and see if it works.
    If it does not, repeat the process but create a new project after LabVIEW restarts.
    Cameron T
    Applications Engineer
    National Instruments

  • Data filtering not activated for ALE processing of Outbound Deliveries

    Dear all,
    we're currently upgrading from 4.6c to ERP 6.0 and are facing a serious problem with our IDoc interfaces:
    In 4.6c, data filtering for Message Type SHP_OBDLV_SAVE_REPLICA was activated and use to extract some segments from the IDoc sent to our logistics provider.
    In ERP 6.0 data filtering is not activated for SHP_OBDLV_SAVE_REPLICA and we do not know how to activate it. For some reason, we can still see the data filtering setting when we switch to "system view" in BD64 but we're not able to change it.
    Checking filter settings in the old system using transactions BD60, ... we do not see any clue how data filtering or filter objects have been defined for SHP_OBDLV_SAVE_REPLICA.or in it's context
    Help please - thank you very much in advance,
    Martin Pluntke

    Dear all,
    thank you for your help. I've just realized that the former project team made a modification to object LIKP, method SAVEREPLICA in transaction BDBG and set it to "Data filtering allowed".
    This setting was lost during upgrade.
    Last question: When redoing this modification (I hate to do this but that's the only way to keep the interface running) and save it I get an error/warning message during generation that the definition is inconsistent. I can continue the generation or cancel it. However, the switch is activated and my filter settings suddenly appear again in BD64 (they've been there all the time, but not displayed or active).
    Is there anything I've to keep in mind? Can I generate, should I ignore?
    Thank you all for your help,
    Martin
    Edited by: Martin Pluntke on Feb 8, 2008 4:37 PM

Maybe you are looking for