The headphone jack.

I'm beginning to lose my mind over this. Maybe someone can shine some light on what I can do here.
I bought my MacBook Pro on Sunday, the 25th. I enjoyed it greatly. I love everything about the MBP.
But no more than 12 hours into it's life, I plugged my iPhone's earbuds into the headphone jack while riding on the BART train. The audio sounded VERY distorted, so I pulled them out, and discovered the volume controls are disabled. One trip to System Preferences later, I find that the MBP is stuck trying to output to S/PDIF. This is verified by the red light coming out of the headphone jack.
I called up AppleCare, and they have me perform some procedures. They have me zap the PRAM, restart the computer...nothing works. So they gave me a case number and sent me to Apple Store Walnut Creek to get a replacement MBP. So on the 27th, I did just that.
No more than 15 minutes after I arrive, I'm walking back out with a new MacBook Pro in the box. Got home, unboxed it, and speakers worked. I was a happy camper.
Until today, the 28th.
I decided to listen to some music while I was on break at work. Feeling skittish about plugging my iPhone's earbuds in again, I instead opted for some noise canceling headphones.
Lo and behold, the exact minute I unplugged them, the internal speakers went dead again. The MBP now (again) only outputs to S/PDIF or headphones. Internal speakers no longer work at all.
This is my second MBP from Apple as they replaced my last one for the same exact problem.
What should I do? I'm pulling my hair out in frustration.

It does sound like a hardware issue. You can go to any Apple Store for service. I know it's a pain, but you should do this soon - within the first 14 days after purchase, they replace defective products with new ones. After 14 days, they repair your product, meaning that in some cases it's sent out and takes 1-2 weeks.
Regardless, they will not swap out your HDD, no matter what. Instead, you might consider getting an external hard drive and cloning your internal onto that; Time Machine will only back up your Mac OS, but cloning the drive (e.g. with Carbon Copy Cloner) will do the whole drive, and allow you to clone back to your new machine. Yes, it's an additional expense (and I was a student for many years!) - but, hard drives fail too - usually at the most inopportune times (for example, just before you print your dissertation) and if you have no backup...well, you get the idea.
Good luck!

Similar Messages

  • How do i use the headphone jack as an input on a macbook pro 9,2.... the option just isn't in the sound app.

    how do i use the headphone jack as an input on a macbook pro 9,2.... the option just isn't in the sound app.
    all i have is the internal mic option, can anyone help?
    thanks

    You should also ask this in the MacBook Pro forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/notebooks/macbook_pro

  • Is there a way to disable the headphone jack?

    A few months ago my macbook pro 2012 (non retina) fell and the headphone jack was destroyed in the process, and the sound on my internal speakers no longer work. The apple genius said that the only way to get my headphones and speakers working again would be to replace the logic board. What I'm wondering is if there's a command to type into the terminal that would just bypass the headphone jack entirely so that I could at least get sound through my speakers. Like I said, there's no hope of saving my headphone jack so I don't need advice about how to re-enable it. I'm hoping for a command for terminal to disable the headphone jack so that I can hear sound through my internal speakers. Help?

    Well you have to take a break, sleep, etc sometime!  The repair may take just a few minutes.
    Your other option would be search on the Fixit website and YouTube's "how to tutorials."

  • Video out from the headphone jack died... 30gb 5g

    Hi all.
    So, I have a 30gb 5g ipod. I have played video out of the headphone jack to a tv for years now. I have the apple version of the video out cable. So, recently, the video stopped playing. The audio plays. YES, it is set to tv out = on, NTSC. This worked fine. Now no video. Video DOES play on the ipod itself. And, I bought an expensive dock cable that has composite out and that does work for video. So, I am just wondering what happened to my video from the headphone jack. I guess I could try to get it fixed, but is it worth it? Any ideas would be appriciated! Thanks!!

    OK, I was DETERMINED to figure this one out...simply because it USED to work...
    Somehow (last 'update' I assume)...my 'TV out' was turned off.
    On my 80GB model, it was under menu > videos > video settings > TV Out
    I just turned it 'on' and I was back in business...of course it doesn't make up for last weekend, when I was out of town trying to get the darn thing to work...but at least it works now.
    Hope this helps.

  • I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

    I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
    Thank you,
    Chris

    Michael,
    Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
    As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
    Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
    Best regards,
    David

  • HT201205 How can I connect to a bluetooth devise and use the head phones at the same time? I have a new  ipod Touch  (32GB)'and want to play through a stereo system using the headphone jack and connect to a blue tooth speaker in another room

    How can I

    Not possible, there is a physical switch inside the headphone port, when the headphone jack is plugged in the switch is open and disables the iPod speaker and Bluetooth networks. Cheers.

  • I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to

    I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to pick one or the other, is there a way to have both?

    I asked same question
    Any answers

  • How can I use the headphone jack as an audio input?

    I have a new macbook pro 13".  I want to use the headphone jack as an audio in device, but I do not have the option in sound preferences to choose it as an option for audio in.
    HELP!!
    Thanks.

    alex_on_beats wrote:
    …Anyway, why?
    Ask Apple - we're only users here.
    Griffin iMic is the usual solution to such problems; http://store.griffintechnology.com/desktop/imic
    By all means send feedback and let them know how t'd off you are; http://www.apple.com/feedback/macosx.html

  • How can I remove the background sound from the headphone jack for my MacBoo

    for my MacBook Air problem adding music intensifier (Panasonic ST-HT1000) to give it an unpleasant sound background that sounds like a whiz, it's not so loud, but it is an unpleasant .. after a short time can get used to, but the fizz does not pass, however, believe that it is a big problem.
    Further I notice that when MacBookAir disconnected from the charger, it remains quieter sound.
    At first thought that the headphone jack (3.5 mm Headphone:
    Connection: 1/8-Inch Jack) or wiere have problem, but tried 3 different cables, but that does change enything, the problem remains.
    When I added iPhonu3GS playing - the background sound were not, then everything is OK!
    How can I remove the background sound from the headphone jack for my MacBook Air 13?

    There is no way to bring that up unless you have it typed in a document. You can use My Support Profile to find a list of serial numbers that have been purchased or registered with your Apple ID.
    http://support.apple.com/kb/HT2526?viewlocale=en_US 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  240G Vertex 3 SSD Boot HD 

  • Can you manually disable the headphone jack on Macbook Pro?

    I recently got the tip of a speaker plug stuck into the headphone jack of my 13' Macbook Pro. I tried various things and finally decided that I'd take it in to get repaired. I took it into a store called Jump+ which is an official apple retailer in my town (as we have no nearby apple stores). They attempted to take it out and succeeded at doing so except for a tiny piece of metal (copper) which is in the very tip of the headphone jack.
    This causes me to not have sound or use of headphones.
    I was thinking of trying the superglue trick however the technician made the piece so small that I won't be able to get enough surface for the adhesive to stick to. He also said that since the peice of metal is copper it won't come out with glue.
    I was wondering if there was any terminal code, or any type of overide that is possible without having to replace the motherboard(?) that will disable the headphone jack so I can at least listen to the speakers on my Macbook. There is no chance of me removing this tiny peice of metal by the looks of it.
    Thank you very much.

    AFAIK, you can't, it's a hardware switch, attached to the back of the headphone port.

  • The headphone jack on my iPod Touch Gen 2 is intermittent. I get sound sometimes out of one channel and sometimes both depending on how I hold the headphone jack.  Is this a costly repair?

    The headphone jack on my iPod Touch is intermittent.  I gat sound out of one channel or both depending on how I hold the jack.   It is making intermittent contact.  Is this a costly repair by Apple?   Can I do this repair myself?
    Thanks

    Here is a third-pary place. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Apple will only exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    Here are instructions for doing it yourself
    iPod Touch Repair - iFixit

  • 9 month old Zen Micro with the headphone jack problem

    So, I've been putting up with the headphone jack problem for a few months now, and i've finally decided to get it repaired or fixed. I emailed Creative a few months back and they told me to send it in. My question is, since I am out of warranty, will they repair the unit or send me a whole new one all together?
    thanks,
    mike

    Actually, I just sent in my 7-month old Micro in b/c of the headphone jack problem and they sent me a brand new shrink-wrapped one. They <EM>didn't </EM>charge me for anything. All I had to do was wait 2 weeks for them to send it back to me (grueling but doable) and pay about 2.44 for shipping the micro to them. So now I'd have three batteries if it weren't for the fact that one of them swelled up; I have NO IDEA how that happened. So yeah I guess the point of the post is that you don't get charged anything even if you're out of the 90-day labor warranty.

  • My headphones suddenly won't fit into the headphone jack on the 1st generation ipod touch

    Has anyone had the problem where the headphones would only go about 3/4-way into the jack on the ipod touch?  I tried cleaning out the jack but there's no lint or dust that I could get out with a qtip or blowing air.  Any suggestions?

    Could there be a tip from another set of headphones stuck in the headphone jack?
    Have you tried another pair of headphones?
    Does the plug look OK?

  • I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?

    I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?

    Have you tried:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    Apple will exchange your iPod for a refurbished one for this price:
    Apple - Support - iPod - Repair pricing
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • My iPhone 5 is suddenly having audio issues through the headphone jack.

    So this is a strange situation, and I'll try to explain in depth so that someone might be able to suggest a solution. As reference, I have an iPhone 5 that I purchased in late-February. I've had every other model of iPhone except for the first iPhone, so I am pretty familiar with the device. I used to be on AT&T, and switched to Verizon when I upgraded to the iPhone 5.
    Two days ago, I was on a six hour road-trip, and I'd been playing my music like normal through my car's auxillary cable. After stopping for lunch, I went to plug my music again, but once the music started to play, I realized that only the drums were playing at normal levels while the vocals were very, very soft. I switched through a few different songs, and realized that all the songs were being played at different levels; sometimes the backup vocals were normal levels while the instrumentation and lead vocals were quiet, or vice versa. I decided to plug my iPhone in to charge, and when I did this, the audio levels were all normal. However, the iPhone was NOT charging. I removed the charger, and the audio went back to being weak and distorted. I went back and forth at this for a bit, trying to figure out what was going on.
    Since then and after some testing, I realize that my iPhone will now only charge anywhere EXCEPT in the car charger (I simply use my USB cable that came with my iPhone and plug it into the power adapter I have in the car). This morning, I tested the audio in my home speaker system, and I had the same audio issues. Only half the song's tracks would be at normal audio levels, while the other half would be at a very quiet, almost nonexistent level. I tried plugging my charger into the phone to see if that'd make a difference, but instead of the audio going back to normal like it does in the car, the music stopped and there was just crackling and very noisy distortion sounds.
    I'm super confused and not sure what to do. This has never happened to me with any of my iPhones. I am updating my software right now, and am hoping that that may help somehow. Otherwise, I'm at a loss. Any suggestions as to what I should do would be greatly appreciated!

    Do the new iMacs have digital audio out through the headphone jack?
    Yes.
    http://support.apple.com/kb/SP576

  • Will apple replace my ipod touch since the headphone jack no longer works properly?

    It is still under warranty and there was no damage to it from anyone. The headphone jack is faulty and it is a hardware problem not user damage

    If they determine it to defective, then they will replace it.

Maybe you are looking for