The laptop keeps powering off from sleep mode

At night, I close the lid and retire to bed. If I open the lid within 5-30mins, it wakes up and askes for password. However, in the morning when I open the lid, there is no response, and I have to press Power button several times, for it to boot up again. When this happens, it seems to have created "recovered" documents in Word and Excel. Can anyone tell me why this has started happening in the past 6 weeks?

I have an awful lot of code...This lot is just from 8.48 today..This may not all get to you, so is there another way I can enable you to see all the logs?
27/02/2014 20:05:31.000 kernel[0]: hibernate image major 1, minor 0, blocksize 4096, pollers 5
27/02/2014 20:05:31.000 kernel[0]: IOThunderboltSwitch<0xffffff8035849a00>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
27/02/2014 20:05:31.000 kernel[0]: IOThunderboltSwitch<0xffffff8035849a00>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
28/02/2014 08:48:17.000 kernel[0]: vm_compressor_flush - starting
28/02/2014 08:48:17.000 kernel[0]: vm_compressor_flush completed - took 12927 msecs
28/02/2014 08:48:17.000 kernel[0]: hibernate_flush_memory: buffer_cache_gc freed up 29272 wired pages
28/02/2014 08:48:17.000 kernel[0]: hibernate_alloc_pages act 194524, inact 259776, anon 63878, throt 0, spec 1272, wire 130185, wireinit 224041
28/02/2014 08:48:17.000 kernel[0]: hibernate_setup(0) took 16669 ms
28/02/2014 08:48:17.000 kernel[0]: en0: BSSID changed to 00:ac:54:c3:37:ea
28/02/2014 08:48:17.000 kernel[0]: Bluetooth -- LE is supported - Disable LE meta event
28/02/2014 08:48:17.000 kernel[0]: wlEvent: en0 en0 Link DOWN virtIf = 0
28/02/2014 08:48:17.000 kernel[0]: AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving).
28/02/2014 08:48:17.000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xe800 ****
27/02/2014 20:05:48.000 kernel[0]: hibernate_page_list_setall(preflight 0) start 0xffffff8094e31000, 0xffffff8094e51000
28/02/2014 08:48:17.000 kernel[0]: hibernate_teardown started
28/02/2014 08:48:17.000 kernel[0]: hibernate_teardown: wired_pages 130842, free_pages 857699, active_pages 48714, inactive_pages 2786, speculative_pages 0, cleaned_pages 0, compressor_pages 138
28/02/2014 08:48:17.000 kernel[0]: hibernate_teardown_pmap_structs done: last_valid_compact_indx 112388
28/02/2014 08:48:17.000 kernel[0]: hibernate_teardown: mark_as_unneeded_pages 2048, 12766, 10876
28/02/2014 08:48:17.000 kernel[0]: hibernate_teardown completed - discarded 25690
28/02/2014 08:48:17.000 kernel[0]: hibernate_page_list_setall time: 563 ms
28/02/2014 08:48:17.000 kernel[0]: pages 537232, wire 81522, act 48714, inact 2781, cleaned 0 spec 0, zf 5, throt 0, compr 138, xpmapped 51500
28/02/2014 08:48:17.000 kernel[0]: did discard act 106256 inact 250560 purgeable 45724 spec 1272 cleaned 260
28/02/2014 08:48:17.000 kernel[0]: hibernate_page_list_setall found pageCount 133160
28/02/2014 08:48:17.000 kernel[0]: IOHibernatePollerOpen, ml_get_interrupts_enabled 0
28/02/2014 08:48:17.000 kernel[0]: IOHibernatePollerOpen(0)
28/02/2014 08:48:17.000 kernel[0]: encryptStart 14010
28/02/2014 08:48:17.000 kernel[0]: bitmap_size 0x1f4dc, previewSize 0x5d1e60, writing 131336 pages @ 0x60534c
28/02/2014 08:48:17.000 kernel[0]: hibernate_rebuild started
28/02/2014 08:48:17.000 kernel[0]: hibernate_rebuild_pmap_structs done: last_valid_compact_indx 112388
28/02/2014 08:48:17.000 kernel[0]: hibernate_rebuild completed - took 36 msecs
28/02/2014 08:48:17.000 kernel[0]: booter start at 1067 ms smc 0 ms, [54, 1, 0] total 281 ms, dsply 0, 0 ms, tramp 345 ms
28/02/2014 08:48:17.000 kernel[0]: hibernate_machine_init: state 2, image pages 81319, sum was ea8364fc, imageSize 0x12362000, image1Size 0x6bba000, conflictCount 467, nextFree 200
28/02/2014 08:48:17.000 kernel[0]: hibernate_newruntime_map time: 0 ms, IOHibernatePollerOpen(), ml_get_interrupts_enabled 0
28/02/2014 08:48:17.000 kernel[0]: IOHibernatePollerOpen(0) 8 ms
28/02/2014 08:48:17.000 kernel[0]: hibernate_machine_init reading
28/02/2014 08:48:17.000 kernel[0]: PMStats: Hibernate read took 473 ms
28/02/2014 08:48:17.000 kernel[0]: hibernate_machine_init pagesDone 132957 sum2 3b10ef4e, time: 473 ms, disk(0x20000) 394 Mb/s, comp bytes: 86933504 time: 130 ms 633 Mb/s, crypt bytes: 192577536 time: 122 ms 1495 Mb/s
28/02/2014 08:48:17.000 kernel[0]: Wake reason: EC.LidOpen (User)
28/02/2014 08:48:17.000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
28/02/2014 08:48:17.000 kernel[0]: Previous Sleep Cause: 5
28/02/2014 08:48:17.000 kernel[0]: Previous Shutdown Cause: 3
Thanks for taking the time, much appreciated.

Similar Messages

Laptop won't awake from sleep mode

Toshiba PSCBLU-01L003
I've had this laptop for a few months, and rarely move it from my office desk. When I leave it in active mode, the screen will eventually go dark and the computer will awaken when I touch the keyboard.
However, if I close the lid, or lock the screen, the computer will not awaken from sleep mode. I get a blank screen that the only remedy is to remove the laptop from the power cord, and remove the battery to restart.
All drivers and software are up to date I keep them updated.
Any suggestions, would be appreciated.
Solved!
Go to Solution.

Then I would change that setting to something else, click Save Changes and restart the computer. Then I would go back and change the setting back to Sleep, Save changes and restart again and see if that cures it.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Bluetooth powers off in sleep mode

My bluetooth is powering off during sleep mode on my 2.93 ghz iMac, core 2 duo. It does not happen everytime, but 2x in the last week. The only way I can get it back on is to reboot. Any suggestions as to reason, and possible fix?

Try doing a smc and pram reset.

Can anyone tell me why my iphone ios5 keeps turning off in sleep mode. i will lock the screen then go to use my phone a while later and the apple logo appears

my iphone ios5 keeps turning off after i lock my screen.( not asking me to turn off phone) when i go to use my phone again the apple logo appears and my phone seems to be starting up again, how do i stop this from happening?

The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck.

Laptop won't wake from sleep mode.

My laptop will sometimes spontaneously go into sleep mode and won't awake unless I remove the power cord and battery. At the same time I notice the top of the case/tracking pad get very hot. Sometimes when typing normally the cursor location will jump around your text and mess up your sentences. This is very annoying and I can't seem to make this stop from happening. Another thing I am noticing is system performance is slowing down, and the HDD is making a humming noise. Not sure if these are all related.
I've seen/read some threads on the sleep mode issue, but not the rest. Any seen anything like this? Laptop is still under warantee and I might just have to take it in, but I want to make sure I have issues with the hardware.
System details: G4 15" Powerbook, 1.5 Ghz, 60 GB HD, 512 MB Ram.
PowerBook G4 1.5 Ghz Mac OS X (10.4.8)

Welcome to the Apple discussions.
You've raised a few issues. First, to try a fix for the sleep/power issue, reset your Power Mangement Unit described at http://docs.info.apple.com/article.html?artnum=14449
Next, run your Apple hardware test. Insert the first OS X DVD that came with your system (should say AHT Version n.n in small print on the DVD), and reboot holding the option key down. Choose Apple hardware test, and follow directions. Choose the extended test. If you have one of the TechTool programs, that does the same testing. Does this point out any issues?
Performance slowing down...how much data do you have on your hard drive? You want to keep at least 10% free for system usage. Do you keep your system on 24x7? If not, there is a chance some of the system disk log maintenance won't run. You can run a program like MacJanitor or OnyX to clean them up. MacJanitor can be found at http://personalpages.tds.net/~brian_hill/macjanitor.html and OnyX can be found at http://www.titanium.free.fr/pgs2/english/download.html . I prefer OnyX because it does much more than run the Apple scripts, however, either tool will run the scripts.
When the top of your case seems hot, you should look at your Activity monitor, located on your hard drive in applications/utilities, to see if anything is causing the CPU to run up to 100%.

Qosmio X500-11G - Incrorrect turning off from sleeping mode

Hello everebody,
When I leave my X500-11G (Windows 7 64bit) in turning on condition and no one process is working computer is turning off incorectly in stead of go to sleeping mode. After that X500 don't responce for keyboard and mouse and I have to push power button for continue. X500 is turning on but BIOS informs about incorrect turning off Windows and propose different ways of restart Windows: normal start or safety modes.
Is this problerm famous and how to fix it?
Thank you,
iPal

Hi buddy,
To be honest I also dont know why it happens but theoretically this problem could be caused by software... Are you using preinstalled Windows version or have you installed your own Windows version?
Furthermore I would recommend loading the default settings in BIOS. Therefore press F9 key in BIOS setup.
Have also a look in Windows Event Viewer. Usually you can find a log file about all errors and maybe you can find an interesting information about this problem.

My laptop wont wake up from sleep mode

Hello, I hope you can help me!
I have this problem: When I set my laptop to sleep mode or I close my laptop (I have set "sleep" asi action after closing the laptop) it just wont wake up... I open in - nothing, I try to push the button for starting - I can hear it booting, but after few seconds the laptop is quiet again and nothing happens.
All I can to do is trying to turn it on over and over again and after 10 tries it finally starts. Sometimes helps plugging or unplugging the charger.
I don't have this problem with hybernation mode.
I own ThinkPad E535.
I hope it's Windows 7 problem or something with drivers. Or do you think it's a problem with BIOS? I hope not.
Thank you for advices!
(I'm sorry for my poor English, it's not my first language.)

Hit me over the head enough times with a fact and it will sink in.
In the front right corner where your right wrist sets when typing there is a light in the dot of the i in Thinkpad. When the computer is asleep, what is that light doing? When you try waking up the computer and the screen is black, is the light doing anything?
Do you have the power manager installed?
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com

IMac powers off in sleep mode after Mountain Lion installation

After I installed Mountain Lion on my 2010 iMac, it will power off after I don't use it a while. It used to just go to sleep, I'd shake the mouse, and it would come back up. Now it powers off and I have to power it back up every time.
My Macbook has NOT had this problem since Mountain Lion install. It is fine.

Try doing a smc and pram reset.

Is it possible to get the decline and answer buttons from sleep mode?

The way my iphone operates now, when a call comes in and the phone is in sleep/locked mode, the only option is to slide the lock to answer the call. When a call comes in and the phone is not locked, it gives the option to decline the call with a red button and answer the call with a green button. My question is this: Is it possible to set the phone so it gives the decline/answer option coming straight out of sleep/locked mode?

Nope. But single clicking the Sleep/Wake button will silence the ring, and double-clicking the Sleep/Wake button will send the call to voicemail, having the same effect as "Decline."

Why My Macbook Pro 13" so slow and the fan keep running when I sleep mode my mac? This problem make my mac battery become low when I sleep mode it. I've been using EtreCheck and here the result. Anyone know how to solve my mac problem?

Hardware Information:
          MacBook Pro (13-inch, Mid 2012)
          MacBook Pro - model: MacBookPro9,2
          1 2.5 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 1:15:23
Disk Information:
          APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 499.25 GB (474.03 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [System] org.macosforge.xquartz.privileged_startx.plist 3rd-Party support link
Launch Agents:
          [System] org.macosforge.xquartz.startx.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
          None
Internet Plug-ins:
          SharePointBrowserPlugin: Version: 14.0.0 3rd-Party support link
          FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 13.0.0.201 - SDK 10.6 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          Default Browser: Version: 537 - SDK 10.9
Safari Extensions:
          FastestTube: Version: 2.2.1.7
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
Old Applications:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               5%          WindowServer
               5%          com.apple.WebKit.Networking
               3%          Safari
               1%          EtreCheck
               0%          systemstatsd
Top Processes by Memory:
          229 MB          com.apple.WebKit.WebContent
          139 MB          Safari
          123 MB          com.apple.IconServicesAgent
          53 MB          Finder
          48 MB          WindowServer
Virtual Memory Information:
          1.56 GB          Free RAM
          1.55 GB          Active RAM
          319 MB          Inactive RAM
          588 MB          Wired RAM
          278 MB          Page-ins
          0 B          Page-outs

You certainly don't have any third-party software that's causing your sluggishness.
Sometimes, a failing hard drive can cause sluggish behavior, however.
Boot into your Recovery partition (hold down the command and R keys whilst booting) and once at the Recovery screen, select Disk Utility. Select your hard drive (in your case, the aptly named "Macintosh HD") and click on the "Verify" button. If you get green text telling you that everything appears to be OK, then it's not your hard drive slowing things down. If you get red text telling you that the disk needs to be repaired, click on the "Repair" button. If the disk can be fixed, it will be. If not, call back.
Clinton

So my MacBook pro, after I turn it off from "sleep mode" for over an hour....will make a cracking sound for a little while when I turn it back on. It sounds like something is burning internally or something. Help

I need to know why it's doing this, thanks

Hi
I dont know why the first message appeared but usually this message is shown when the HDD recovery or Recovery disk would be started.
Do you have some recovery disk in the CD/DVD drive?
Check this otherwise I have no explanation for that
Maybe you should backup the data and should recover the notebook again
Would be worth a try

HP Envy Laptop will not Wake up from Sleep Mode with Windows 10

The reason I decided to go back to windows 8 was because since upgrading to Windows 10, when my computer goes into sleep mode, I cannot wake it up. I have to press and hold the power button to shut it done and restart. Even if I close my laptop, and reopen the lid, it wont start back up and I have to press and hold the power button and shut it down and restart. After trying to restore my HP Envy Laptop from Windows 10 to Windows 8, it got stuck in a Repair PC Loop and I could not even access the desktop, I tried the restore option to an earlier date and that failed and all the repair options also failed. The last option I had was to do a full PC Refresh, and that one worked. It took about an hour but no data was lost, and only a few of my downloaded apps were removed. An html url was left on the desktop that showed a list of all the apps that were removed. So all I did was download those back and now im back up and running Windows 8. I want to re-download Windows 10, does anyone have a fix for this issue?

Hello mistyb1,
Welcome to the HP Forums.
I see that you are having an issue with the printer not waking up from Sleep Mode.
I do have a few suggestions that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Once you have the printer connected to the wall outlet, please use the ON/OFF button to do a proper power cycle. This will do a Semi power reset on the printer.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Rainbow wheel keep spinning from sleep mode

Imac rainbow wheel keep spinning coming from sleep mode with no end in sight. I have to turn it OFF and ON again in order to have it working.

When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Docking open T61p on the Advanced dock powers off the laptop

Hi,
I have noticed a weird problem with using the T61p with the advanced docking station. I undock the laptop and then close it, so that it goes into hibernate mode. Then a few hours later, if I open the laptop and work on it undocked. After that if I dock the laptop without going into hibernate, the laptop just powers off, i.e. as if the Power off button was kept pressed.
The laptop does not give the OS the shutdown command, just switches the device off. I am running Win XP professional.
Does anyone know how to solve this issue? This causes all work to be lost, when the laptop is docked.
Thanks in advance.
Regards,
Ivan.
T61p 6460DVU XP Professional

ivanpais, welcome to the forum,
you can get the full story on this site;
Docking to a ThinkPad Advanced Mini Dock, ThinkPad Advanced Dock, or Essential Port Replicator, caus...
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Satellite P200D-11R sound and graphics crash after waking up from sleep mode

Hi,
I am wondering if anyone here has had similar experiences to mine (below) or can offer any solutions.
I have upgraded my P200D-11R OS to Vista 64 Ultimate to take advantage of the extra performance. I also add that the BIOS has already been updated to version 1.4.
Well, everything works fine with the standard 2Gig of RAM which the laptop was supplied with originally, however, when I upgrade the RAM to 4Gig (2 x 2GB Samsung 667mHz modules), sound and graphics problems appear every time the machine is brought back from sleep mode.
The sound card makes a very laud fuzzy noise every time it wants to play a sound and the graphics produce lots of horizontal lines on the screen. I then just have to restart the machine which means loosing all my unsaved work.
Everything works fine as long as the machine does not enter sleep mode. I have currently disabled the sleep mode to prevent the machine from entering it but I am finding life very hard without it.
I am very surprised and also disappointed at the fact that Toshiba did not test these machines with Vista 64 Ultimate and 4Gig of RAM!
Extra info:
The memory is the same Samsung type as the 1Gig modules supplied by Toshiba originally with the machine, and the part number Toshiba recommends.
I have tried installing other (more recent) device drivers by Realtek and ATI without any improvements.
The memory modules pass all tests and are not defective. They have also been tested on my friends Dell notebook with no problems even in sleep mode.
I have installed my friends Dell 2Gig memory modules in my P200D and they too produce exactly the same results with post-sleep crashes.
My thoughts are that this must be another BIOS issue unless anyone can shed some light on the issue from another angle.
Please help! Many thanks in advance.

Hi Sascha
Since you are running a Vista 32bit version, the upper limit of the memory recocnised by the machine is 3.2gb which is the maximum a 32bit operating system can address and use. The diffrence here is that I also upgraded my OS to Vista Ultimate 64bit to get yet better performance out of the 64bit dual AMD processor.
3.2gb of RAM on 32bit OS does not necessarily increase the performance. However, it keeps the performance stable when you open many more programs at the same time since the machine has more RAM to play with before staring to use the much slower hard drive as operating memory (Page File), to keep all thoes open programs running.
A 64bit OS such as Vista Ultimate 64, recognises the whole 4gb of RAM and much more (for instance, 8gb with 2 x 4gb RAM modules). The 64bit OS itself would generally consume more RAM to start with, however, with 4gb I found the general performance to be much better. Going back to the problem however, my P200D-11R with Ultimate 64 and 4gb RAM refuses to wake up from sleep mode gracefully and the graphics and sound crash every time, forcing me to restart.
My feelings at present is that eventhough your machine may be slightly different, I bet if you upgrade your OS to 64bit, the machine will start recognising all of the 4gb of RAM and post-sleep crashes will start to appear!

The laptop keeps powering off from sleep mode

Similar Messages

Maybe you are looking for