Changing Portal Role after the status change of user status at the CRM end.

Hi,
I have Portal with Java database as the default and CRM is connected to it using SSO.The database in both the case in separate.The users that are created in Portal will have a BP status in CRM sytsem.
Now my requirement is that if the status of the BP gets changed at the backend simultaneoulsy its Portal role should also gets changed.How shall i facilitate this procedure of changing the Portal Role?
Is there any RFC ,BAPi or Webservices required for this?
Regards,
Amarys
Edited by: amarys on Sep 13, 2011 11:20 AM

Hello,
Since the status has no number it will appear under statuses W/O number bottom right in status overview window.
These status will appear as additional text beside current user status. For example if user staus is BUG and status without number is DFL and sets when deletion flag is set and gets deleted when it is revoked than user status will appear as
BUG DFL -
Deletion flag set.
BUG -
When deletion flag revoked.
You have to live with it. I don't think there is a way out for that.
Thanks
Saikishore Ganga.

Similar Messages

What is the significance of define status profile for user status

hi friends
what is the significance of define status profile for user status. what does it contain
Regards
Vinny
Edited by: vinny novice on Dec 29, 2008 1:53 PM

Hi
please see Kathir's article on ststus profile
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/supplier-relationship-management/how%20to%20configure%20user%20status%20in%20mysap%20srm.pdf
regards
Muthu

Screen "Define Status Profile for User Status" should not open in changemod

Dear all ,
After following the path CRM>SPRO>SAP IMG -->Customer Relationship Management -->Transactions -->Basic Settings --> Status Management -->Define Status Profile for User Status.
the screen opens in change mode & allows user to carry out the changes, this is very crucial screen & hnece should not be in open mode ,kindly advice on closing the same.so that it opens only in display mode for production system.
Regards

Hi Milind,
To Block changes to any Object their is a Provision for the same in Client Deatils Screen
Go to TCode:SCC4
Check the Tab Cross-Client Object Changes
Try setting the Option (3.No Changes To Cross-Client Customization Objs)
Following Options Symbolises:
Changes to the Repository and cross-client Customizing permitted
There are no restrictions on the maintenance of cross-client objects for the client when this setting is used. Both cross-client Customizing objects and objects of the SAP Repository can be maintained.
No change to cross-client Customizing objects
Cross-client Customizing objects cannot be maintained in the client with this setting.
No change to Repository objects
With this setting, objects of the SAP Repository cannot be maintained in the client.
No change to Repository and cross-client Customizing objects
Combination of both restrictions: Neither cross-client Customizing objects nor objects of the SAP Repository can be maintained in the client.
(Choose This One it Should Resolve your Problem)
Hope it answered Your Queries..
Thanks and Regards,
RK.

Status Profile and User Status for Support Message

Hi All,
We need to customize Status Profile and User Status Specifc to customer requriments.
we need the following Status for Support Message:
Open
Accepted
Rejected
Fixed
Retest
Closed
Note:
1] Only the Message creator should be able Set staus Open and Closed
2] Message Processor should only set status Accepted, Rejected, Fixed and Retest
I have created the Status Profile in BS02.
Can some one help me the steps or guide how to implement the above logic and restrict the status access between Message Creator and Message Processor
Thanks!
Regards,
Pradeep L

> 1] Do i have to create different Auth.key for Message processor and Message creator and then assing them in BS02 to Status Profile?
       Anand: Diffrent authorization key for different statues......not for message processor and creator
> 2] Now how do i assign this Auth.Key to the Auth Object B_USERSTAT?
       Anand: Using Tcode PFCG, this can be done.... Consult Basis.....
>     do i have to create a new Zrole and assign or is there any other way.
       Anand: Yes u need to create a Z role and include that authorization objects in that z role....
       so u might have to create 2 Zroles and then assign them to the persons concerned....
Inspire ppl by rewarding
Regards,
Anand...

How can i get the list of all users present in the LDAP

Hi Experts,
How can i get the list of all users present in the LDAP ?
Is there any API or function Code to get all user list??
Please help me out!!!
Help will be rewarded

Well it will depend on exactly where your UME configuration points to in the LDAP tree but yes, it is possible to get all users. Something like the following should do it:
import com.sap.security.api.*;
import com.sapportals.portal.prt.component.*;
IUserFactory iuf;
ISearchResult isr;
IUser user
String userid;
iuf = UMFactory.getUserFactory();
isr = iuf.getUniqueIDs();
you will need to iterate the ISearchResult object but you can get IUser objects by
userid = (String)isr.next();
user = iuf.getUser(userid);
then you can imanipulate / identify / or whatever you need with the user object
Haydn

Internal Orders: how to link a System status to an User Status?

Hi All,
with regerence to Internal Orders, could anyone tell me how to link a System status to an User Status?
That's to say, I need that whan the System status become X, the User status must become Z.
Thanks

Hi Chaitanya,
You should be able to hide those fields by creating a standard variant(If you want to hide those fields for everyone executing those transaction) for the same transaction.
Please have a look at transaction SHD0 to accomplish the same.
Thanks
Narasimhan

How can i get the list of all users present in the UME ?

Hi Experts,
How can i get the list of all users present in the UME ?
Is there any API or function Code to get all user list??
Please help me out!!!
Help will be rewarded
-pankaj chouhan

Hi Pankaj,
find the official NetWeaver security javadocs (including access to UME) <a href="http://help.sap.com/javadocs/NW04S/current/se/index.html">here</a>. Look for classs UMFactory and proceed from there.
Best regards,
Martin

I loaded microsoft office on my mac airbook. I have no problem accessing it from my user. When the other log on user is clicked the software icons are not avauilable. How do I have any user on my airbook have access. i.e. my wife

I loaded microsoft office on my mac airbook. I have no problem accessing it from my user. When the other log on user is clicked the software icons are not avauilable. How do I have any user on my airbook have access ? . i.e. my wife

Greetings Niel
I was able to copy down the Word, Excel and PowerPoint icons and access "however" when I exit out of the guest user it deletes them from the tool tray at the bottom.... I need them to stay there not have to copy them down..
Can you still assist?

What happen if I change a role after I released the transport?

Here is my Scenerio:
1) Assuming I've created a role : ROLE1 in DEV
2) I create a transport TR1 with that ROLE1, NOT yet released.
3) Then I added ME21 txn to ROLE1.
4) Then I released the transport TR1
5) Then I remove ME21 txn from ROLE1.
6) Then I transport role from DEV to QA.
Q1) I would expect In QA, ROLE1 will still has ME21. - True?
Q2) TR1 will be the snapshot of the ROLE1 when I release the transport TR1 - True?
Now, I want to delete the ROLE1,
A) I would need to create another Transport TR2 first with ROLE1 in DEV
B) Then delete ROLE1 in DEV
C) Then release Transport TR2
D) Then I decided that I still need ROLE1. (oops)
Q3 I should not transport TR2 so that it won't delete it in QA. - True?

Hi Dominick,
>
> 1) Assuming I've created a role : ROLE1 in DEV
>
> 2) I create a transport TR1 with that ROLE1, NOT yet released.
>
> 3) Then I added ME21 txn to ROLE1.
You should add the role again to the Transport to avoid inconsistency
> 4) Then I released the transport TR1
>
> 5) Then I remove ME21 txn from ROLE1.
>
> 6) Then I transport role from DEV to QA.
> -
>
> Q1) I would expect In QA, ROLE1 will still has ME21. - True?
Answer: If you reassign the role to the TR then you will get.
> Q2) TR1 will be the snapshot of the ROLE1 when I release the transport TR1 - True?
Answer: TRUE (but without ME21 if you don't add the change to the CR - see below for detail discussion)
> -
>
>
> Now, I want to delete the ROLE1,
>
> A) I would need to create another Transport TR2 first with ROLE1 in DEV
>
> B) Then delete ROLE1 in DEV
>
> C) Then release Transport TR2
>
> D) Then I decided that I still need ROLE1. (oops)
> -
> Q3 I should not transport TR2 so that it won't delete it in QA. - True?
Answer: TRUE. And if you want the role again back to DEV without recreating it, please download the role from QAS or PROD and then Upload it to DEV. After that you need to generate the Profile of the role.
> -
FYI: When a Change is Included into a request to send in other systems, then this request is called "Change Request" (CR). After Releasing, the CR called as "Transport request".
CRs are basically (in layman language) the Pointers to the DB changes performed. These are included into a CR as "Task". A CR can contain multiple Tasks created by different users.
Please note if this is a Workbench CR then it is ONLY editable by that particular user(owner of the Task). Also the Object captured in a Task of a WCR possesses a Lock till it gets released and thus can't be added to any other Task of a different CR. The Objects are unlocked when the Tasks and the CR is released respectively.
There are no Object Lock for Customizing CRs ... like your TR1 which contains Creation / Deletion of roles.
After the release of each Task, all Objects contained into every Task are transferred to the Change Request. After release of all Tasks, the CR owner can release the CR and thus the Transport Request has been initiated. Technically, at this time, a copy of Data from the Database of DEV captured under the headers of each Tasks are written to Data Files in Central Transport Directory.
Now coming to your queries..... there are no such synchronization happens for a Task if the Objects are edited in different time frames before Release. So, when you added ME21, again you need to assign this change to the same CR. (_Answer to your Q1_)
Please let me know if you have any confusion / query.
Regards,
Dipanjan

In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie. Is there someway to refresh the IPhoto event in IMovie?

Background: I'm transferring file folders from a Visa laptop via an external hard drive to my IMac. In the folders are photos and videos from different cameras. SO I first tried to import to IMovie but it would not recognize any of the files. So then I imported into IPhoto and both photos and videos were imported and I created events for each folder. When I first opened IMovie I had to wait for it to create "thumb nails". Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events. I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie. I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie.
I'm doing this on three events with about 100 photos and videos. But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie. I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.
Appreciate any tips or pointers.
OBTW this is my first question as a first time Apple owner.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Changing system status depending on user status

Hello All,
What I need to do is, when the user sets the user status to, let's say, "Finished", I have to detect it and change the system status to "Concluded".
Does anybody have any idea about how could I manage this situation?
Thanks in advance.

If you set the system status from within the transaction online, the solution by Richard is indeed correct. However, if you change a user stauts using an action, you have to perform two actions: set the user status (FM CRM_STATUS_CHANGE_EXTERN) and set the system status (FM CRM_STATUS_CHANGE_INTERN) as well.
In this case, you also must check if you have to set this status only on header level, or also on item level, but a good developer can help you out on this one.
Hope this helps you.

How do I change my resolution after iTunes has changed it to a lower ppi

I am using Win7 with an iPad. When I first logged onto iTunes the site changed my resolution. It is now lower than is should be. I have two screens, a lap top and a 17" monitor. When I slip one page from the laptop to the larger screen i lose about 1/5 of the width.
I can't change the resolution to what it optimally should be for my system. How do I fix this?
I love my iPad and the Apple Store. But this is reminiscent of MS making a system operate how MS thinks it should operate instead of how the user wants it to operate.
thnx

It's not possible to comment unless you would like to post the URL of your feed.

Is the Sales Order Item User Status available in user exit MV45AFZZ

Hello,
Does anyone know if a sales order line item user status is available within user exit MV45AFZZ (USEREXIT_SAVE_DOCUMENT)?
I need to send an email when the status changes from one specific value to another specific value but I don't seem to have access to what the latest value is in this user exit.
I have found a table XTVSTAT which cntains some user status' but it's not clear which status maps to which line item.
If anyone has any suggestion please let me know.
Thanks,
Ruby

Hi,
I do need to access the values as I need to check for a specific change to the user status from value A to value B.
I have already tried debugging the user exit and searching through the available variables but the status information doesn't seem to be available.
I guess I will have to try the output determination route. Can you explain this in a bit more detail please.
Thanks,
Ruby

Block Order TECO on the basis of operation User Status

Hi Experts,
I am trying to restrict the TECO of maintenance order on the basis of order operation status. I have configured the user status profile and assigned it to order operation. This user status profile have two statuses, INCL - Incomplete and another is CMPL - Complete. I have prohibited the TECO for user status INCL. But when I create an order and try to TECO, the system allows me TECO it enenif the operation user status is INCL.
Could you Pl. tell me, have I missed something in configuration?

Dattatraya,
Actually you can control TECO by completion confirmation of order operation as PCNF ( partial confirmation) for operation which you have mentioned in Order. So you can set up in configuration like allow TECO only once CNF ( Full confirmation ) for all operations mentioned in Order.
For your mentioned scenario , I dont feel based on user status you can stop the TECO, anyway you can check with other experts as well.
Riyaj

Setting System status on assigning User status

We can change the user status by changing the system status ...
is there some work around to change a system status e.g REL on Setting a User Status .. ?
Please advise. Thanks

Hi,
I think this is possible using "Maintain Substitutions", but no sure. Try out once.
SRP0 - Project Systems -> Structures ->Operative structures -> Work Breakdown Structures (WBS) -> Maintain Substitutions.
Regards,
Punith.

Changing Portal Role after the status change of user status at the CRM end.

Similar Messages

Maybe you are looking for