The RPAS_HOME variable is not set

I want to install RPAS Configuration Tools on Windows 7.
But I received the following error
"The RPAS_HOME variable is not set..."
It seems, that all correct
Maybe someone knows what to do with using cygwin?

Hi,
Try creating RPAS_HOME as system variable in Wiindows 7 and reboot it. This may help.
Another solution is to invoke you program with a wrapper windows batch file which sets RPAS_HOME env variable before invoking target program.
Let me know if you need further details.
Regards,
PPS

Similar Messages

  • Unable to start java tools - Error : Environment variable JAVA_HOME not set

    hi all,
    I am not able to start the java tool - Visual Admin, Configtool, etc in the solaris Bash shell.
    I was given authorizations on solaris and i'm able to view the logs and browse in solaris boxes,
    But, when i try to start Visual Admin, it says" ERROR environment variable JAVA_HOME not set "
    Since,my colleagues are using this tool for years, how come the environment variable is not set only for my user profile ?
    Is it like the environment variable has to set seperately for every user profile ?
    Do i need to set it initially for my profile eventhough it is working for others ?
    i am confused..please help.
    Addy

    Nicholls, Thanks for your quick reply.
    Ofcourse, I use my login ID to use java tools and they use their's obviously.I don't use <SID>adm.
    We WRQ reflection for X-Windows and Putty for Command line Solaris Access.
    When i try to use VA through the X-Window tool WRQ reflection, I am not able to start the tool.
    My doubt here is, Do we need to setup the environment variable for every new user initially for the first time ? ( I am a new user for this environment )
    Supposing if i need to setup the environment variable, do i need to set it up for the all the Solaris Boxes i use ?
    I am able to browse through the files.when i try to start the VA by giving ./go i am not able to start it up.
    Appreciate your time and valuable replies.
    Addy

  • The shared variable does not exist????

    This seems really strange!!
    I already use several shared variables within my whole project without any problem. At this point, I created a new one (a boolean network published) and everything seemed just fine (no errors were detected in my VI and it runs normally). However, when the VI on my host computer tries to use the shared variable, it generates an error message saying "LabVIEW:  (Hex 0x8BBB0005) The shared variable does not exist." (see attached screenshot).
    What is going on? I can't find any help online about that... Can anybody help me with this please?
    Thanks!

    Hello,
    This error can occur if you have an incorrect Path specified under your Bind to Source section for the shared variable - this could be as simple as a typographical error in the defined path.  Double-check that portion of your shared variable definition, and hopefully it'll be as simple as finding a typo in your path.  You should be able to browse for your variable/path by clicking Browse and then selecting Network Items if your shared variable is on the network.  Can you find it by browsing?
    I hope this helps!
    Best Regards,
    JLS
    Message Edited by JLS on 10-05-2006 03:54 PM
    Best,
    JLS
    Sixclear

  • An error occured while opening the connection: Object reference not set to

    After I uninstalled Oracle Developer Tools for Visual Studio .NET 10.1.0.4 and installed Oracle Developer Tools for Visual Studio .NET with Oracle10g Release 2 ODAC 10.2.0.2.21 I got the error message below when I want to connect to my 10g database using Oracle Explorer.
    Error:
    An error occured while opening the connection: Object reference not set to an instance of an object
    I use OracleConnection to open also cannot be done. But I use Oracle SQL Developer I can connect to orcl that I cannot connect using ODAC 10.2.0.2.21 in my laptop.
    Please help me.
    Ming Man

    Sorry my mistake, I double checked, the one I uninstalled is ODAC 10.2.0.2.20 and not ODAC 10.1.0.4.
    But I have that error.
    Ming Man

  • [Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

    Hi
    DECLARE @XMLA nvarchar(3000)
    , @DateSerial nvarchar(35);
    -- Change date to format YYYYMMDDHHMMSS
    SET @DateSerial = CAST(GETDATE() AS DATE);
    --SELECT @DateSerial
    Set @XMLA = 
    N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
     <ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
    xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
    xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
    <KeyErrorLimit>-1</KeyErrorLimit>
    <KeyNotFound>IgnoreError</KeyNotFound>
    <NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
     </ErrorConfiguration>
     <Parallel>
    <Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
    xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
    xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
     <Object>
     <DatabaseID>MultidimensionalProject5</DatabaseID>
     <CubeID>giri</CubeID>
     <MeasureGroupID>Fact Internet Sales</MeasureGroupID>
     </Object>
     <Type>ProcessFull</Type>
     <WriteBackTableCreation>UseExisting</WriteBackTableCreation>
     </Process>
      </Parallel>
    </Batch>';
    EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
     iam executive the    query when iam getting below error.
      [Execute SQL Task] Error: Executing the query "DECLARE
    @XMLA nvarchar(3000)
    , @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
    correctly, or connection not established correctly. 
     how to solve this error;
     please help me

    What are you trying to do? What sort of data source is  SHALL-PCAdventureWorksDw?
    When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
    If you explain why you think this would work in the first place, maybe we can help you.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • : "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

     Hi   .
        I was creating the  pass the values t in temp tables  though s sis package vs2012 .
      First I was taken on executive SQL TASK.
     IN EXCUTIVE SQL TASK  . I was write the stored proce:
    Sp;
    reate  procedure  USP_GETEMP2333
    AS
    begin
    Select  eid,ename,dept,salary from emp
    end;
    create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
      insert into #temp
       exec USP_GETMP02333
       go.
     It was executive correctly.
     I was taken another sequence container. In the sequence container iam creating one   executive  sql
    In 2<sup>nd</sup> excutive sql task: sql statements is
    if object_id('emp_fact_sal') is not null
     drop table emp_fact_sal
    select eid,ename as emp_name,sal_bar=
    case when salary<=5000 then 'l'
    when salary >5000 and salary<=7000 then 'm'
    else
    'h'
    end
    into emp_fact_sal from #temp.
     and one falt flies  it was taken to designation .
     iam changing  all  connection properties:
     in oldeb connection:
    in excutive sal task properties .
    delay validation is true,
    and retain connection maner is also true,
    and package mode is 64 bit is false.
     But iwas excutive in 2<sup>nd</sup> excutive ql task .
    Iam getting this type of errors,
                    [Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
     drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
    correctly.
     Please help me

    Arthur suggestion works but you shouldnt even be doing this on a SQL Task.
    Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
    Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
    is an undocumented behavior and should not be relied upon.

  • CIC: the caller information is not set into search fields

    Hello,
    I've a problem with the IC WinClient inbound call handling. I've configured the telephony integration but the identified partner is not set into the search fields.
    I want to pass the identified partner to the search field that I only need to confirm the BP.
    Could anybody help me please?
    regards,
    Christian

    To be sure, the server field says your server "name"
    you are tying to log in as diradmin
    and you are using your password from when you set up the server? This password is also the same local admin password that you setup.

  • Env variable LD_ASSUME_KERNEL not set to 2.4.19 for webgate

    The error show up when I successful installed the OAM webgate 10.1.4.2 in Red Hat Linux 2.x, my apache is 2.2.3, and OAM is 10.1.4.3.0.
    I checked the matrix the file "Oracle_Access_Manager10_1_4_0_2_linux_APACHE2_WebGate" is compatible for Red hat 5.x.
    I set the "LD_ASSUME_KERNEL =2.4.19" in apachectl. I got different error " error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory"
    Was the webgate I installed not compatible for RHEL 5.x?
    Where to download the webgate for 10.1.4.3.0?
    thanks.

    Probably the best combination for OEL 5 is OFM 11g Webtier and OAM 10.1.4.3 WebGate. I even have it running in 32-bit mode on a 64-bit OEL 5.
    --olaf                                                                                                                                                                                                                                                                                                               

  • Variable CWD not set in CGIServlet

              We are using a cgi on WL 5.1 We have a third party CGI that looks for a variable
              CWD which stands for current working directory. This variable should be set to
              the directory in which the CGI is located. For e.g if the CGI mycgi is located
              in /opt/dev/domain/cgi-bin/mycgi then CWD=/opt/dev/domain/cgi-bin
              What is happening is weblogic always sets it to the weblogic installation directory.
              This creates a problem as the cgi cannot get the CWD correctly.
              Does anyone know how to set this variable CWD?
              Have tried giving in the weblogic.properties as initArgs, tried to launch the
              CGI from another servlet using java.net.URL after setting the header CWD. But
              it is always setting CWD to the weblogic installation directory.
              As a sidenote, we can move the CGI to the weblogic installtion directory, but
              that would allow us to invoke only one CGI. What we are looking at is to invoke
              the same CGI's located in different directories
              Vineet
              

              We are using a cgi on WL 5.1 We have a third party CGI that looks for a variable
              CWD which stands for current working directory. This variable should be set to
              the directory in which the CGI is located. For e.g if the CGI mycgi is located
              in /opt/dev/domain/cgi-bin/mycgi then CWD=/opt/dev/domain/cgi-bin
              What is happening is weblogic always sets it to the weblogic installation directory.
              This creates a problem as the cgi cannot get the CWD correctly.
              Does anyone know how to set this variable CWD?
              Have tried giving in the weblogic.properties as initArgs, tried to launch the
              CGI from another servlet using java.net.URL after setting the header CWD. But
              it is always setting CWD to the weblogic installation directory.
              As a sidenote, we can move the CGI to the weblogic installtion directory, but
              that would allow us to invoke only one CGI. What we are looking at is to invoke
              the same CGI's located in different directories
              Vineet
              

  • OBIEE repository variable CURRENT_ENTERPRISE_QUARTER not set

    Hi,
    We have a trial on-premise instance of Fusion Sales. The embedded OBIEE reports are not retrieving results because of the filters CURRENT_ENTERPRISE_QUARTER and
    CURRENT_ENTERPRISE_YEAR pointing to 2011.
    Could someone please advice in detail how to get these variables set correctly.

    Found the root cause of this issue. The accounting calendar created in the system started from 2012. I created another accounting calendar which included 2011 Q2 and set it as CRM common calendar. Waited for the BI refresh and checked the seeded reports. They the current_enterprise_year value changed.
    Refer the support document for the steps:- Doc ID 1602167.1
    Giving the excerpt from the above document
    1) Navigator > Setup and Maintenance >Manage Accounting Calendar
    Create a new calendar including Year 2011 and Q2 (Second quarter)
    2) Navigator Manage Calendar Profile >CRM Common Calendar (ZCA_COMMON_CALENDAR')
    > Assign the new calendar (commonly at Site level) instead of former one
    > Save and Apply
    3) Navigator > Sales Dashboard > Open dashboard with new seeded reports : data and figures are displayed now

  • I initially set up Sync on my desk top but want my Favorites of my laptop to be on the server and have not set up my laptop yet. How do I replace the data on the server with my laptop info?

    I downloaded Firefox 4 on my desktop and setup Sync. I just recently downloaded Firefox 4 on my laptop and have not setup Sync yet on my laptop. I want the Favorites of my laptop to be the data on Sync and overwrite what is already on the server via my desktop. How do I make my laptop my main computer now? Also, once I setup Sync, does it allow me to download the Favorites to be permanent on my desktop or on my laptop if I reformat it at a later point?

    Is your device recognized by your computer? If yes, copy the pictures and videos as shown in this article:
    Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer
    If it is not recognized, try this first: iOS: Device not recognized in iTunes for Windows
    Disable autosync in iTunes, right click on it in the device list and choose "transfer purchases" to copy apps and other media bought in iTunes to your new library.
    Do the same again and choose "backup", to create a manual backup without syncing.
    Since your device will be erased due to the new iTunes library during the first sync, you can use this backup afterwards to restore your settings and data.
    Set up at least one contact and event on your computer before you start, to be able to merge calendars and contacts.

  • Should i initialize the instance variables or not?

    hi guys ,i am trying to learn java therefore if i miss something sorry.
    for example i have like this a class
    is it good thing to always initialize those variables or initialize like in this exam and initialize with constructor too ?
    public class SomeClass
         private double principal=1.0;
         private double rate=0.1;
         private int    years=1;
         private int    times=1;
         public static void main(String[] args)
    }

    878144 wrote:
    i guess i explicitly initialize them or i dont however java does it for me even i dont explicitly say int variable=0; however java will do it i guess also it doesnt make sense to me i do or compiler does.No idea what you're saying here. Try writing proper sentences with proper capitalization, grammar, spelling, and punctuation.
    why some people say yes some of them say no.if u dont do it then java does it also same thing.Reason to do it: Makes it clear what you want the initial value to be, and that you didn't forget to initialize it.
    Reasons not to do it: Redundant and cluttersome. Also, can lead to unexpected behavior in some cases involving subclasses.
    Ultimately, the decision is more about personal preference than anything.

  • HT201412 Latest version of iTunes not recognize iPhone 4 which needs super-charge to save it /research = device will show in a column on the left & new version not set-up that way & under account information knew the device & deleted there to start over?

    I give up and I'm heading to the Apple store!!

    Yes, the old album art view is gone, bu you can see the album art for a song that's playing by clicking on the art image and it will open a bigger view.
    Everything else in your post is a waste. I'm not going to spend time reading it. If - and I repeat if, you have a question on how to get the best out of the new look iTunes, post it. But don't spend your time in long rambling negative rants.

  • How to register a regular rmi object in the class which is not setted as startup classes?

    hi:
    it seems the rmi object can only be registed in a startup class,
    is there any way to do this in an nostartup class?
    Thanks for any clue.
    Reno hu
    TCSI

    Yes.
    It is possible to export an RMI object from a servlet's init() method. You
    will have to specify a <load-on-startup> tag in the web.xml deployment
    descriptor, but otherwise, it's pretty straightforward to bind/unbind an RMI
    object when an application is deployed/undeployed.
    -Don
    Andy Piper wrote:
    "Reno hu" <[email protected]> writes:
    No
    hi:
    it seems the rmi object can only be registed in a startup class,
    is there any way to do this in an nostartup class?
    Thanks for any clue.
    Reno hu
    TCSI
    " .sigs are like your face - rarely seen by you and uglier than you think"
    mail: [email protected]

  • Re: Failed to Start Deployment Server -- X Window DISPLAY variable not set

    I don't know how you have hit that in an normal environment:-( Can you describe what you did? As long as you start the bundled AppServer in the same environment as Creator, both need the DISPLAY set.
    A guess, did you try to install Creator as root and then use it as normal user? Don't do that. Creator is intended to be installed by the user who will use it!
    I know our updated JDK now throws different exceptions when the DISPLAY variable is not set than the one before. I found that (but too late for the release) and have the needed change. But so far I was not aware that any customer had actually hit that. So it was not considered a high enough priority to go into a hotfix. I'll file a CR and the fix will hopefully make it into a patch.
    As a short term workaround for that problem (But I still believe your setup has other problems):
    Go into <Creator_home>/SunAppServer8/lib/ and replace processLauncher.xml with the backup (processLauncher.xml.bak).
    The only thing you will loose, is the little icon in the Gnome/KDE/SystemTray.
    I hope this helps,
    Thanks,
    -- Marco

    I don't know how you have hit that in an normal environment:-( Can you describe what you did? As long as you start the bundled AppServer in the same environment as Creator, both need the DISPLAY set.
    A guess, did you try to install Creator as root and then use it as normal user? Don't do that. Creator is intended to be installed by the user who will use it!
    I know our updated JDK now throws different exceptions when the DISPLAY variable is not set than the one before. I found that (but too late for the release) and have the needed change. But so far I was not aware that any customer had actually hit that. So it was not considered a high enough priority to go into a hotfix. I'll file a CR and the fix will hopefully make it into a patch.
    As a short term workaround for that problem (But I still believe your setup has other problems):
    Go into <Creator_home>/SunAppServer8/lib/ and replace processLauncher.xml with the backup (processLauncher.xml.bak).
    The only thing you will loose, is the little icon in the Gnome/KDE/SystemTray.
    I hope this helps,
    Thanks,
    -- Marco

Maybe you are looking for