The selected SAN location is already in use.

Has this been resoved somehow? I have a project due on Monday and can't access my files at all! I don't have another disk. Neither of my externals work now because they were both plugged in when this happened. Please help!!!

Similar Messages

Im getting the message "The selected SAN location is already in use." This happens when I start up final cut pro 10. Anyone else have this problem before?

Hi everyone. I just today got the message "The selected SAN location is already in use." Has anyone recieved this message before? If so, how can I fix this?
Thanks!

Welll I don't see fast how to edit my reply. (the projects and events on external drives show up, but there is a error when FCP-X started up with the message that the "home folder user" is in use
and can not be used by SAN becase of the same name????)
First I did use Preference Manager 3.2 to trash the preference but that did not solve my problem.
Then I repaired permissions. I did not solve the problem.
Waht solve dthe problem is next.
I started my MacBook Pro is safe mode (shift power on) Then I repaired permissions.
Then I copied the Final Cut Events en Projects folders from my home folder Movies to a external dive (in a folder so that with start up it did not show up in. (And trashed the project and event folder in my movies folder)
I restarted the Mac Removed again the Preference.
Then I restarted FCP-X and it started up without a problem.
Then I copied the content of my old folders to the new folders in my movies home folder. (not just the folders Final Cut Events/Projects)
Now it is working correctly.

When i installed and launch Final cut pro 10.0.5. (trial version) The program write me: The selected SAN location is already in use. What I must to do. it started and will be ok?? Thanks

Hi,
I have problem with installation Final cut pro x (trial version)
When I installed and launch, it write me this:
The selected SAN location is already in use. The storage location "RAAF" on this computer is already in use by "RAAF" on "Pavels-MacBook-Pro". To access the location, quit Final Cut Pro on "Pavels-MacBook-Pro" or remove the location.
What I must do?
Thanks so much for you tips
Paul

Try repairing permission in the Disk Utility and rebooting,

When I open FCPX, it tells me, "The selected SAN location is already in use," and then quits.

I use Final Cut Pro recreationally mostly, but I got hired for a project by chance. I don't use any external hard drives, just my disk. I have an Apple Time Capsule for backups. Suddenly I got an error message when I open it "The selected SAN location is already in use." The subscript reads, "The storage location "newtonfamily" on this computer is already in use by "newtonfamily" on "Newton-Familys-iMac". To access the location, quit Final Cut Pro on "/Users/newtonfamily/Movies/" or remove the location," and has only an okay button, which quits FCPX when you choose it. None of my stuff loads in the project panel or event library. What do I do to get it back.

Try repairing permission in the Disk Utility and rebooting,

Final Cut X read "The selected SAN location is already in use". Now will not even open. Any advice would be really grateful.

Initially while working on two projects I began to run out of disk space on the external hard drive. Soon I was given this message:"The selected SAN location is already in use" To try and remedy the situation I decided to move one project to another harddrive that I use for another project. Initially it then showed nothing(projects and events) on either harddrive after that. Now FCX won't even boot up at all. Please help. I'm approching deadlines on all of these projects.
Thank you for any advise.

RE : "The selected SAN location is already in use"
I spent 2 hours with Apple technical support and even did a remote session as they looked at my desk top live.
1st the bad news, there is no real solution nor is there an answer as to why this happens. The SAN is supposed to only work through fiber optics and is strictly designed for multiple users accessing the same drives … It should only be activated manually and only through fiber optics . No one at Apple could understand why this is happening, why did my thunderbolt disk appear to be on a SAN and unexplainably unable to be accessed by my computer because it was being accessed by my computer. A conundrum indeed
The semi good news is that I was able to open the original session eventually.
Here is the workaround… And it ain't pretty .
If you can access the disk on the desktop copy the whole content of the disk to another drive , this is because you will have to reformat the drive which is giving you the problems.
Format the original problematic drive and after you have cleared all of the user preferences for Final Cut X relaunch Final Cut.
Final Cut should now see the drive without any of the SAN issues.
Start a new event on the original reformatted drive and give it a somewhat generic name so as not to confuse it with the original event that went bad.
Reimport into this new fresh event all of the original media ( video/audio/graphic ) files and copy them to the reformatted drive.
Do not start a new project related to this new event
Shutdown Final Cut X
Now go to the drive in which you have copied all of your original files and copy the original problematic Final Cut Projects folder right next to the Final Cut Events folder at the root level of the newly formatted drive.
The new drive should only have 2 folders in it now, one is the new Final Cut Events folder that you created by copying over all of original media and the 2nd one should be the Final Cut Projects folder which you just copied back from the backup drive.
I only had to copy the one project which started giving me problems with the SAN issue, because it was the only FCX on my drive at the time therefore I kept intact the original Final Cut folder hierarchy, theoretically even if you have many different projects inside that Final Cut Projects folder it should work, but if that doesn't work try only copying the problematic Final Cut Project.
Start Final Cut again and it should read everything except that the media will be off-line ( unlinked ) and you should be able to re-link all of the media if the files had not change names somewhere along the process.
The one caveat about this is that my edits were off against the music. It almost seems like there was some kind of format issue. Something was lost in translation . My project was only 2 min. long and it had about 50 edits. The 1st three edits were completely off after that it was hard to tell ,some would be on some would be off.
Now I was going on about 2 hours of sleep so i am a bit blurry but what I am certain is that the 1st few edits were 100% off by at least 60 frames.
Again this may have just worked in my instance and it may not be applicable every time this problem pops up.
BTW whenever I connected an older drive everything worked fine there were no SAN issues.
I am on an iMac 27 inch mid 2011, 3.4 GHz Intel core i7 with 16 GB of RAM
running Mac OS X version 10.7.4
and Final Cut X 10.0.4 and
my drive is a Western Digital my book thunderbolt Duo 4 TB formatted in RAID 0
as a final note I tried everything I read on every forum before calling Apple.
Hope this helps someone
Giorgio
new root level drive look

Error on start up: The selected location is already in use

I just installed Final cut pro X on my 13" macbook pro with retina display.
When I launch FCP X it is gving me the follwing error message: The selected location is already in use "The storage location "xyz" on this computer is already in use by "(null)" on "(null)". To access the location, quit Final Cut Pro on "(null)" or remove the location"
Where "xyz" is the name of my home folder.
I tried repairing the disk using disk utility and restarted the computer multiple times. But this did not resolve the issue.

aludnakvissu wrote:
This is the screenshot of my movies folder
… and no other external drive is connected to my computer.
it is:
your files are on Google Drive ... which is very external ...

HT5188 I have 50 iPads and 50 codes, but I am not able to install the app on the last ipad. One code in the spreadsheet says it's already been used but shows no serial number or device name.

I have 50 iPads and 50 codes, but I am not able to install the app on the last ipad using Apple Configurator. One code in the spreadsheet says it's already been used but shows no serial number or device name.

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

Otherwise software may be attempted to access the drive. The the computer up in Safe Mode by holding shift when you turn it on. Also be sure to power off and on the hard drive itself.

Microsoft Windows Network: The local device name is already in use.

I posted in : http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/disconnected-network-drive-error-as-follows-an/9a877c38-5e86-4c34-84c2-427a965577c6?page=2
Error:
"An error occurred while reconnecting drive letter to \\network server\share folder.
Microsoft Windows Network: The local device name is already in use.
This connection has not been restored."
1) A workstation is running Windows 7
2) The user has a drive letter mapped to a UNC
3) The connection is interrupted at some point and then restored
4) Upon attempting to access the mapped network drive, the user gets the error about the letter being
already in use.
Extremely disappointed that some of the posts marked as answers were obviously not, shows how poor the moderators here are.
My latest results clearly point to a Windows 7 client problem:
I received the error.
Had run nslookup so had a prompt open.
ran dir z:    worked. went to Windows Explorer, same error.
ran dir z:\sharename    worked. went to Windows Explorer, same error.
copy con z: test.txt then type test.txt; could create and retrieve file. Went and clicked on mapped drive in Windows explorer and received same error.
Obviously(?) not a Server or Networking problem. Ran Malwarebytes from bootable CD (client doesn't believe in AV). Didn't happen with USB flash drive.
Any other ideas?
I already have tried:
support.microsoft.com/kb/317021
http://support.microsoft.com/kb/303339
ftp://ftp.microsoft.com/misc1/BUSSYS/WINNT/KB/Q194/8/29.TXT
http://support.microsoft.com/kb/273151 Exchange issue
http://support.microsoft.com/kb/2663418   hotfix for win7
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/78276f1d-f7f9-416b-b903-
b9a18ecba67b/
http://support.microsoft.com/kb/297684
Ran MicrosoftFixit50494.msi
net use z: \\SERVER\ShareFiles /persistent:yes
http://support.microsoft.com/kb/2663418
http://support.microsoft.com/kb/297684#LetMeFixItMyselfAlways
http://support.microsoft.com/gp/gp_fixit_windows/en-us
http://support.microsoft.com/mats/windows_battery_power_settings
http://support.microsoft.com/kb/979470/en-us ???
http://support.microsoft.com/kb/947235/en-us
http://msdn.microsoft.com/en-us/library/cc232765.aspx
http://support.microsoft.com/kb/942817
Q939820? server 2003 sp3 Fix226580 341940_ENU_i386_zip.exe
http://support.microsoft.com/kb/983620
http://support.microsoft.com/kb/297684
net config server /autodisconnect:-1
KB Article Number(s): 2663418 Hotfix
http://support.microsoft.com/kb/983620
http://answers.microsoft.com/en-us/feed/t/9a877c38-5e86-4c34-84c2-427a965577c6
http://answers.microsoft.com/en-us/feed/t/9a877c38-5e86-4c34-84c2-427a965577c6
net use z: \\SERVER\1_CADFiles /persistent:yes SBS2011 Server with current service packs
Win7 Pro users with current Windows Update status
http://support.microsoft.com/kb/2663418
http://support.microsoft.com/kb/297684#LetMeFixItMyselfAlways
http://support.microsoft.com/gp/gp_fixit_windows/en-us
http://support.microsoft.com/mats/windows_battery_power_settings
http://support.microsoft.com/kb/979470/en-us ???
http://support.microsoft.com/kb/947235/en-us
http://msdn.microsoft.com/en-us/library/cc232765.aspx
http://support.microsoft.com/kb/942817
netsh winsock reset catalog
netsh int ip reset reset.log
Q811259
Q299357
Q937624
secpol.msc >> Lanman authentication level "send LM and NTLM"
net config server /autodisconnect:-1
changed server video to "standard vga"
disabled power save for NIC
Cannot disable Intell Raid software
http://technet.microsoft.com/en-us/library/cc780360%28v=WS.10%29.aspx   restart
http://technet.microsoft.com/en-us/library/bb726989.aspx browse list
Q138365
net config server /autodisconnect:-1
two additional registry keys are added:
anndelta: REG_DWORD: 0xbb8
announce: REG_DWORD: 0xf0
netsh winsock reset
netsh interface ipv4 reset
netsh interface ipv6 reset
ipconfig /flushdns
shutdown /r
sfc /scannow
http://support.microsoft.com/kb/929833
http://social.answers.microsoft.com/Forums/en-US/w7network/thread/306dd446-7630-4d5b-8aa0-
40fb839b293a    dns issue
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/i-have-this-problem-on-three-
win7-x64-systems-two/d44ed544-65f5-43a7-9e17-d2d10085c765?page=2
Leftover Homegroup components or Firewall?
disable DNS Client = dnscache
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/service-control-manager-reports-
that-a-timeout/e2e76ae5-ed09-4685-af86-5f8c2cd120bf     Norton Internet Security uninstall issues
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/windows-7-no-dns-or-no-network
-after-resume-wake/c1253ab0-4793-449e-8975-a900ce7dec4f
NSLOOKUP
KB Article Number(s): 983620 Hotfix

This is usually because the drive letter assigned to the network share is taken by something else. Maybe, by a removable drive.
Moderators and other answerers do their best to help specific cases, but everyone has their own situation. Apply common sense to the replies you find in the forums.
When you typed dir z: - is Z: the drive letter you wanted for this share, or it was automatically assigned?
-- pa
Alternatively you could try using common sense when you post, as well as taking the time to read the entire issue post so that you can avoid showing both your ignorance and arrogance (arrogance without any competency to back it I might add).
Suggesting that it might be "another drive" that took over the mapping shows your lack of reading comprehension and is unhelpful.   Please take the time to, once again, read first.
Lastly moderators here generally show little technical skill beyond entering search words into a knowledge-base of articles and then applying the results incorrectly further exacerbating the situation for the customer.

Where is the home button located so i can use siri?

WHere is the home button located so i can use siri?

The Home button is the round button on the front of your iPad.
Which iPad do you have? Siri is only available on the new iPad with iOS 6. The original iPad and the iPad 2 do not support Siri.

An error occurred while reconnecting...The local device name is already in use. The connection has not been restored.

Hi,
So I have 2 PC's and I sign with the same credentials. I have a hard drive which I decided to share. In the setting I created permissions for the user credentials of both vcomputers and have full control access.
Basically, everytime I open my laptop after and it wakes up and try to connect to the network drive, I get the error
An error occurred while reconnecting...The local device name is already in use. The connection has not been restored.
I need to stay disconnecting all drives and reconnecting them. WHen I restart my PC the network drives restore perfectly. I don't understand why it doesnt work on wake.
Any ideas?

It seems that when a machine goes into sleep, the network connection is disconnected, naturally, but the machine still has the connection mapped. If you run the 'net use' you will see the connection. When you try to reconnect it, it sees the
connection and gives you the error.
I do not know if you can directly modify this behavior. However, as a work around, you could build a simple script like:
net use 'connection' /delete ( write it into a text file and save it has a .bat file.)
Use scheduled tasks to have the script run right before the machine goes into sleep. You can do so by setting the task to RUN ON Event: event 42 for the KERNEL_POWER source.
You can see http://superuser.com/questions/679195/run-a-script-when-hibernating-windows-8 for more info .

The local device name is already in use - Mapped Drive

I am having an issue with users losing their mapped drives to a Server 2012 box when they come into work the next day. The error message is "The local device name is already in use".
Autodisconnect has been disabled on both the server and workstations as per Microsoft KB articles, and the only way to correct the issue is a re-boot of the workstation.
I doubt it is the workstations that are the issue as drives mapped to Server 2008r2 do not experience this issue.
Any assistance would be greatly appreciated.

Hi,
>>I am having an issue with users losing their mapped drives to a Server 2012 box when they come into work the next day. The error message is "The local device name is already in use".
To tackle the issue, we can try to remove the existing network mapping, and then create a new network mapping for the share.
In addition, although the following KB applies to Window XP, it focuses on the similar issue and can be referred to as reference.
You may receive the "The local device name is already in use" error message when you try to restore a network mapping connection to a shared network folder on a Windows XP-based client
http://support.microsoft.com/kb/890413
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

What does the message mean time capsule already in use when it refueses to backup?

What does the message mean time capsule already in use when it refueses to backup?

Just the network is cranky..
Simple first step.. restart the TC.. ie unplug the power cord.. count to 10.. plug it back in.
Second step if that fails.. restart the network.. off everything.. restart in order.. modem.. TC.. clients 2min gap.
Finally if you are prepared to fight you can load 5.6 utility onto Mountain Lion and do a disconnect all users.. or a few other ways.. turn off file sharing and turn it back on.
The issue being TM did not dismount the sparsebundle correctly.
C12 http://pondini.org/TM/Troubleshooting.html
For more info.

E61 - select web icon & web already in use pops up

woke this morning and selected web icon and "web already in use" popped up. reconfigured settings from nokia settings page and no help. this is v2 firmware.

Thank you guys for trying to help.
I'm actualy already using Opera Mobile as my main web browser since the buil-in web browser is far too limited for my liking. But i'd still would like to be able to use Web for the cases when a page doesn't display properly in Opera. Web is also great to demo the E61 to other people, the mini-map and visual history are sure very impressive features to see.
To nj7: does restoring from the memory card really restores *everything*. That is not only the contacts and calendar data but also all the applications, all their settings and, well, everything else? I've read on several occasions that restoring from the memory card didn't restore some applications properly.
As for upgrading to the new firmware, i am unfortunately not willing to do it for several reasons:
- The nokia software updater tools tells me that there is no update available for my phone
- My local Nokia service center would take at least a week to update my phone (that's if they can do it, which is not even sure). As for most people, i can't live without my phone for a week.
- I haven't seen anything in the list of changes for the new firmware that solves any problem that i've had so i don't quite see the point of updating
- There is a major bug in the new firmware which prevents numeric shortcuts from working in many applications unless you press and hold the blue key. Opera Mobile is affected by this bug. Since i'm navigating in opera exclusively using the numeric shortcuts, upgrading to the new firmware would render Opera Mobile unusable for me. This is not an option. I browse the web extensively on my E61 and the built-in web browser simply isn't good enough for me (plus it doesn't even work anymore and i can't be sure that upgrading to the new firmware would solve the problem for good).
So if anybody has the magic trick to get Web to work again, i'd be most grateful to hear it (and i'll pay you a pint the next time you come round Ireland).

Can i use the same datasource which is already been used for another appln?

Hi All,
There is a datasource from r/3 copa which is already been used in another application. Is it possible for me to use the same data source to my Appln?
If so then pls guide me on that?
Thanks
pooja

Yes you can use it..
It depends actually on your requirement..
If you are already pulling that data into a DSO, then directly use that DSO in your applicaiton by doing a look up or by getting data from it...This will avoid duplication of data...
But if your requirement is not suffice with the DSO you already have then create your own custom and pull the data from the same datasource into it...

The selected SAN location is already in use.

Similar Messages

Maybe you are looking for