The status of "QUERY_VIEW_DATA_PROVIDER" "DP_1" may only change during comm

Hi,
I am facing the below mentioned error while executing a report on the web with a Variable :-
The status of "QUERY_VIEW_DATA_PROVIDER" "DP_1" may only change during command processing
(The report was run on web with a recently configured portal)
Code for Variable Exit :-
    WHEN 'ZZVAR_YS'. "Yesterday
      CASE P_STEP.
        WHEN 1.
          "Pre Processing
          clear l_s_range.
          clear lv_date.
          lv_date = sy-datum - 1.
          l_s_range-opt = 'EQ'.
          l_s_range-sign = 'I'.
          l_s_range-low = lv_date.
          append l_s_range to p_t_range.
        WHEN 2.
          "No After Processing
      ENDCASE.
Variable Characteristics at reporting End :
1.     Optional
2.     Not ready for Input
3.     Single value
4.                  Customer exit Variable
Pointers will be of immense help.
Thanks & Regards,
Rahul

Thanks,
That was some useful information.
Solved using dynamic assignment of Data provider.
Regards,
Rahul R Nair

Similar Messages

What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?

Hello All,
What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?
Navigation
Bob Sales manager<Ebiz form<service request tab<SR type<DFF<additional information for agents <cheque number
The field Cheque number Character allowed (, -) in the DFF Additional Information for Agent should only take numbers
Thanks & Regards
Ayesha

Thanks Sridar
If we use Number we cannot separate the cheque numbers with , or -
We need to enter numbers along with comma and '_' in cheque number field.
Thanks & Regards
Ayesha

Edits will not be saved. Any Edits made to the enterprise global template items are only available during this session.

Hi,
I am getting a pop-up message(Edits will not be saved. Any Edits made to the enterprise global template items are only available during this session.Make edits in checked-out enterprise global template to make them
available for all users of this project server) when trying to insert a new column in the Gannt Chart View.
Due to this what all are the columns that inserted in the project plan, will be lost when open the project in the next time.
I have opened the Enterprise Global Template and cross checked for Gaant Chart view it is showing the table as "Entry" only.
The requirement is what all columns are required for the project plan, manager will insert in the project first time. Next time on-wards it needs to be display the columns when opened the project from server by default.
We are unable to reproduce this issue in our Dev Envt.
Could anyone of you please help me.
Thanks in Advance!
Regards,
Venkat

Hi Venkat,
I suggest to remove Gantt Chart view and Entry table from Eglobal. These are default views from client and it is highly recommended to not use them in Enterprise Global.
Whatever a user ist doing on a view or table which is included in Enterprise Global will be reset on next open - therefore you receive this message.
If you need some server wide defined views and tables, create them. But remove Gantt Chart and Entry.
Does that help?
Regards
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

When trying to load the the Seatle Times Crossword, it says "This site uses Java. If Java is installed and you cannot view the puzzle, your browser settings may need changing."

only started after I installed Firefox 4. had no problems before. IE and Firefox 3, no problems.

It appears that you either do not have Java installed or that you have it disabled. To test to see if you have Java installed and enabled go to:
*http://www.java.com/en/download/testjava.jsp
*Also see: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
Also, do you see Java in the Windows Control Panel? If not, it is not installed on your system. See:
*http://windows.microsoft.com/en-US/windows7/Working-with-Control-Panel
'''Install or Update the [[Java]] plugin''' to the latest version.
*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
*Java Test: http://www.java.com/en/download/help/testvm.xml

Set ZATTR_PROD may only be changed in the original system

Please,
Iu2019ve enhancement the PRODUCT_CUSTOMER2 BADI to change product attribute type when Iu2019m replicating products from ECC to CRM.
When I try to replicate the material from ECC to CRM thereu2019s the follow error:
"Set ZATTR_PROD may only be changed in the original system"
How can I solve it?
Thanks in advance
Edited by: Ronaldo Alvarenga on Oct 25, 2010 11:17 PM

Hello,
Maintain an entry for Z* settype in below path:
SPRO>IMG>CRM>Master Data>Products>Enhancements>Allow Changes to Product Data.
Hope this helps!
Best Regards,
Shanthala Kudva.

How to change the status of an incident, after it is "Confirmed"

Hi, I'm new to ITSM and the client asking me how he can change the status of an incident, after he change it to "Confirmed". Is there a way to change the status of an incident after it is set to "Confirmed"? Or can I change the configuration of the Status field to allow that change?
Thank you

hi
I dont think, you can reopen the confirmed ticket by standard, but please try with the report CRM_SOCM_SERVICE_REPORT.
if not try with the status profile customization, remove the FINI settings from the confrimed status also change the highest and low values also accordingly.
please try.
Thanks
Jansi

How to check the status of infopackage ??

hi,
I have executed infoobject, and i can go to moniter and see the status. but over there it only shows time and no. of records.
like this...
Yellow tringle 15:23:23 ( 234 from 120 records )
does it mean its loading 234 records from 120 records ? that doesnt sound right. for me the second no. is always smaller then the first no.
also, is there any other way to check whats going on ? other then Monior????

Hi honar,
Yellow tringle 15:23:23 ( 234 from 120 records )
Yes it means the load is still processing. Once the load gets completed the request will change to Green and the record count will match like
EX: Green o 15.30.00(234 from 234 records)
As the load is running you can check the back ground might be running goto SM37 tcode enter user name and select the active requests and click execute
or
From the monitor screen "environment" --> job overview --> in the "source system" it will take you to SM37 screen.
Check the job log till it finishes.
If the job finished and still the load is in yellow status - check for the idocs and if they are hung process them manually.
Regards
KP

When I browse, then select a site - as I click on a site nothing shows and 'done' is in the status bar - what do I do about this?

When browsing and selecting a site - once I click on that site instead of opening the site the page is just blank and 'done' shows in the status bar. This has only started in the last couple of months - previously it worked fine! I installed Chrome and do exactly the same without any problems at all. I prefer to use Firefox Mozilla but had encountered this problem which is most frustrating. I cannot make the selected site open. e.g. I asked "Airports in the world" and found many sites. I selected 'azworldairports.com' but clicking on this just produces a blank page. What do I do now? Please help.

View Page Source has been moved to the "Web Developer" sub-menu:
*Firefox button > Web Developer > View Page Source
*Using the Menu Bar: Tools > Web Developer > Page Source
*CTRL+U
*ALT+T+W, release ALT key, letter O key
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]

Hierarchy R3PRODHIER may only be changed in the original system

Hi Experts
I have created a new Product Hierarchy in R/3 when i try to replicated them into CRM by using initial replication of DNL_CUST_PROD1.system throwing an error saying : Hierarchy R3PRODHIER may only be changed in the original system R3LNT200. ....in the SMQ2 before doing initial replication of DNL_CUST_PROD1 status was green.
And again i try to replicated the DNL_CUST_PROD1 by reguest load which has run successfully and 3 blocks are generated then i run the initial replication of Material but status of initial replication status in waiting. which is not run i mean to say.
then i again created a Request load for Object Material and which is run success fully
but my problem is i did not see the new hierarchy and products too in Table COMM_PRODUCT
.and when i see status of the in DNL_CUST_PROD1in R3am1. which is in ABORT .
Hence i request you could you please help me inorder to make green status of the DNL_CUST_PROD1 in r3am1 so that i can able to nun material successfully
i would appreciate you help
thanking you
Regards
Swathi

Hi Swathi,
I'm assuming this development is copied from your production.
For example: Go to COMM_PRODUCT table and check the log sys field. Now it will show the Production Logical System. So you need to convert this value.
After the client copy, basis needs to execute BDLS transaction. This transaction is used to convert the logical systems in all the Database Tables.
     Perform this conversion only for Client Dependent Tables.
     Execute below conversion in CRM Development Box
                   CRMOLDLOGICAL SYSTEM to CRMNEWLOGICALSYSTEM
                   ECCOLDLOGICALSYSTEM to ECCNEWLOGICALSYSTEM
      In ECC Development Box
                   CRMOLDLOGICAL SYSTEM to CRMNEWLOGICALSYSTEM
                   ECCOLDLOGICALSYSTEM to ECCNEWLOGICALSYSTEM
Regards,
Bhanu

Sending e-mail only if the status changed from a specific status

Hi Gurus,
There are a lot of thereads about sending an e-mail when the status is changed to something...
But ,Is there any way to check the previous status prior to send the e-mail?
For example;
I want to send an only e-mail to message processor when the status is changed from "customer action" to "In process" but not when the status is changed from "new" to "In process"
In my opinion to achieve the scenario above there must be something else so-called "previous user status" in the condition creation screen. But there is no...
Thanks in advance,
Gencay

Hi Suzi,
You should select "Value of Item in Expression 1 = Expression 2" as condition in your mail processes. For the approved process, write Approved as Expression 2 in the condition, and Rejected for the rejected process. For both processes write P5_STATUS in Expression 1.
Hope that helps.
Regards,
Sergio

Hi just bought an external hard drive and can't change the sharing and permissions from read only status. How do i change it?

Hi new to macs and dont know how to change the sharig and permissions to my external hard driive from read only mode. please help

Get Info on your drive from the Finder - you'll see a dialog box like this:
If the Privilege is set to Read Only for the user, simply click on the "Read Only" and change it to "Read & Write".
Is that what you're looking for?
Clinton

How do I select/change the status of my post/reply?

Hello,
I'm fairly new to the forum and I'm finding it challenging to figure out how to use all the features in a straight forward manner.
For instance, I've noticed on my recent reply to one of my post questions that the status automatically showed up as "this solved my question". I did not select this status and I did not see any place to select the status of my reply. I went back to edit the reply status immediately and still saw no way to change it.
The fact is, that my reply was not in relation to solving my question at all. I replied to someone who offered a solution and I was replying as to the results of that solution, which did not solve my issues, it just created different issues. So now my post shows as solved when my question hasn't been answered and the issue is not solved.
The probabability that my question above has been asked ad infinitum is better than good, I suspect. But when I search the quesiton in the search communities box I don't get a clear answer. Please do excuse me then, if I am repeating an over asked question. I'm not even sure I'm searching the forum correctly or if there are other options to search in addtion the search box in the upper right hand corner....
Honestly, I've been on a lot of forums and am an active member of several, I'm a fairly advanced mac user, having been a mac guy for decades, and this forum doesn't appear to be very clear or easy to figure out how to use to me. It feels as if they're almost trying to discourage you from figuring some things out...weird. I've been searching for a clear answer for this for an hour now--trying different queries and different parts of the forum.
Any help with how to select and change post and reply staus would be much appreciated.

These buttons that you show were not on the post I replied to in my thread.
You will see the buttons only, if you are the original poster of the thread, not if you asked a question in thread, that someone else started. Also, you will not see these buttons, if you already markes answers as solved or helpful. You can mark two answers as "Helpful" and one answer as "Solved". Afterwards the buttons will vanish, see "Answering to Questions".
Another question that comes up is, if I fail to select either button and simply reply to the post without selecting anything, what happens then?
Then the buttons will stay, until you mark an answer. You are not obliged to mark every answer. It is up to you, how you rate the answers you receive.
You may want to have a look at the tutorials on the main page of the ASC: https://discussions.apple.com/static/apple/tutorial/index.html
Regards
Léonie

While Changing the status system gives error

Dear Experts,
In Solution Manger, While changing the status from Tcode SE38 with Program CRM_SOCM_SERVICE_REPORT system gives error.
Document 8000002519 refused for technical reasons: ERROR_FREE
Message no. SOCM_ACTION_LOG203
Diagnosis
The status value cannot be changed.
The document may no longer be modifiable as a result of its status, or it may be being edited by another user.
System Response
This change transaction is skipped during report processing.
Procedure
Analyze the corresponding document during transaction processing and perform the status change manually if necessary.
Also if i select the status as in process, then it executes sucessfully. Please help me in this.
Ramesh Jaiswal
9867936636

Hi Ramesh,
Pls check your SP level because till SP17 this (CRM_SERV_REPORT) Tcode is not present
I just checked.
So it seems this is availabe only after SP18.... we can use the above report.
Kindly confirm once you solve your problem.
Dirk
Can you please tell us a document which wil tel us what technical things have been changed in this new SP18.for e.g the source for this information.
Regards
Prakhar

How to monitor the status change of pp order?

I want to monitor all of the status change of PP order ,when the status change to DLV, system trigger a idoc to legacy system.
I added some code in EXIT_SAPLCOBT_001, but I found this user exit only working in CO02, when I use MIGO or MB1C ... tcode to do some GR, the source code is not woking, that means I have to add the code to any entrance of status change????? anybody have some good idea? maybe I have to add a monitor to monitor the table jest ????

Could you elaborate your requirement please?
Anyways, the BP transaction display/change mode can be controlled through settings. Goto BP->Extras->Settings->Choose Display/Change/Setting last selected. May be in your system, the setting is 'Setting last selected'. That's why it's showing the last status display/change. If you want it to be display only, you can change the setting to display. But, the settings are user specific and any changes made will reflect for the specific user.

Need to capture a Status date and keep it unchanged if I change the status

Hi,
I have a task list with multiple status like NOT STARTED, IN PROGRESS, WAITING FOR PROOF, WAITING ON SOMEONE ELSE, APPROVED, COMPLETED.
Now, I wanted to capture the WAITING FOR PROOF date so that I can compare it with TASK DUE date and set if it is "On Due" or Over Due" so I used the following syntax:
=IF(OR(Status="Waiting for proof",Status="Waiting on someone else"),DATE(YEAR(Modified),MONTH(Modified),DAY(Modified)))
This works, but if I change the status from WAITING FOR PROOF to COMPLETED, the captured date is changed to "No" which I do not want to happen. I want to retain the same date captured even if I change the status.
Many thanks,
Vasanth

Vasanth, your issue is because you are using the "modified" field whichchanges anytime you open the record. What you may need to add is a datefield that you control and will hold the date you which to compare against. You could initially capture the "created" date in that field then update it ONLY if specific field changes happen so you can change the Status field without disturbing your date comparison. This would require some calculated fields to update this date field only when it is necessary. Good luck!

The status of "QUERY_VIEW_DATA_PROVIDER" "DP_1" may only change during comm

Similar Messages

Maybe you are looking for