The way do not change billing date in VF01/VF04

Hi Dear.
I hope to solve my problum.
As I know...In Standard, When create a billing document, Goods Issue date is copied automatically. And user can be change the biling date.
But sometimes GI date has a diffrent month to billing date by user's changing. So I want know the way not to change the billing date when make a billing document in VF01/VF04.
How can I do it?
Thanks for your answer!

Hi,
Check this userexit USEREXIT_NUMBER_RANGE_INV_DATE
Regards,
Saurabh

Similar Messages

  • When I changed my Apple ID the ID did not change on my iCloud account. there appears to be no way to change the ID because I cannot get into account settings for iCloud

    When I changed my Apple ID the ID did not change on my iCloud account. there appears to be no way to change the ID because I cannot get into account settings for iCloud

    If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID and that ID is a previous version of your current ID, not an entirely different one.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
    You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.

  • Want to change billing date but computer says no

    My billing date for phone and broadband is the 6th of the month, with payment being taken around the 20th, which has been fine up until now. However my employer has now changed my salary payment date and I'd like to change the bolling date so that the payment isn't taken until after the 1st.
    Firstly, why is it seemingly impossible to email anyone to ask about this? All the "contact us" links just take you back to a phone number and I'm at work during the non-automated times so it's not easy for me to make a call.
    Anyway, make a call I did, spoke to somebody in the call centre, tried explaining the situation, but they only seemed to hear the "change billing date" part and didn't seem the least bit interested in the whys and wherefores, then it was just a case of "computer says no, is there anything else I can help you with"
    I can't see why this is such a big problem. It's not like I'm asking not to pay or anything, I know that the first bill after I changed dates would be higher, because it would cover an extra couple of weeks, but I don't see why it's beyond the realms of possibility to put the bill date a couple of weeks.
    I managed it with my mortgage, which is considerably higher than my BT bill
    A quick email to the mortgage company, had a letter back a couple of days later confirming the payment date had been changed and the first payment on the new date would be an extra £xxx to cover the difference, all sorted no problem. Why do BT make things so difficult?
    Solved!
    Go to Solution.

    Try as I might, there seemed to be absolutely no option to change "whole bill direct debit" so I can't quite see how you can do it online, the only option I could see was to set up a DD, but I've already got one.
    Anyway, all sorted now, thanks to a 5 minute online chat. I'm now swtiched to a MPP, which is for give or take a few pence, exactly the same as my monthly bills have been and instead of my next payment being taken on the 20th of this month, it's now going to be taken on the 2nd of next month and every month thereafter, which is exactly what I wanted to do.
    Quite what the difference between whole bill monthly and MPP, I'm not quite sure but it's sorted

  • How to change billing date in S1 - cancellation billing document

    Dear Friends,
    Could you please tell How to change billing date in S1 - cancellation billing document which is even not released to accounting & in gray mode.
    Is it possible?
    Thanks in advance.
    Ranjan

    Dear,
    Thanks for asking exact problem.
    1. PGI in 2008
    2. F2 Billing date in 2003 ( By mistake by the user)
    3. S1 Billing date in 2008
    4. PGI reverse in 2008 & OBD deleted in 2008
    So reduced billing qty is shown in report in 2008 because of S1 Billing date in 2008,
    Billing qty  is not matching with the actual PGI quantity.
    So here if the cancellation billing document S1 could be changed for billing date in 2008, then you could balance it
    Now my issue is how to balance it.
    hope you find it it very interesting
    Awaiting your response.
    Ranjan

  • Nokia prime place in the service can not change th...

    nokia prime place in the service can not change the company's address. How can this be possible???? I received a reply from Nokia that I need to first go to here.com, look for my company and my company COMPLETELY removed. Then, to create a company AGAIN!? And wait 2-6 WEEKS backup postcards so I can verify the company that it appears Nokia's map service!! **bleep**??! Again, what's the point? Companies are changing in the same way as people exchange phone numbers!

    I manage to fix it
    by format my iPhone (General -> Erase All Content and Settings) and restore from backup.
    After the restore the name was updated to my real name.
    ! don't forgget to do a backup for all your apps data and your photos !

  • I-photo:  I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

    I-photo:  I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

    Select all the photos that you need to change, then click the "Photos" menu and choose "Adjust Date and Time".
    If you add a year, it will adjust all the photos that you selected by adding a year (so if you accidentally select one of the photos that already has "2012", that will change to "2013"). 

  • Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g.  I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service".  How do I fix it?

    Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g.  I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service".  How do I fix it?
    I've contacted o2, tried all of their suggested updates and changes, reset my phone 3 times and still no luck.
    Any help appreciated.
    Thanks,
    Louisa

    Hi, l have the same problem, were you able to resolve?

  • Very urgent :how I order by my report within the report option not change i

    Hi master
    Sir I design the report but I need my report order by cheq_no now my report order by voucher no but If I change in query then my format must be change that very problem for me I again design
    Is any option in report through which I order by my report as per my require column I is if I need on cheq_no , voucher_no or date
    Please give me idea how I order by my report within the report option not change in report query
    Thanking you
    aamir

    Use a lexical parameter (see online help):
    select ...
    order by &sort_parameter

  • Partititon1,2,3 in  group ODS,FAC status not change after data redistribute

    Hello,
    first thanks for your help. By now the db2 data redistribute has been sucessful. but another issue occurs , could you give me some suggestion?
    1. run Tcode dbacockpit-->db2 for linux, unix, and windows database > configuration>database partiton group
    i found the stutus in db partion group NGRP_FAC_AB7 and NGRP_ODS_AB7 and partion 1,2.3. is partion not in partitioning map containers created. I know if we want to change the status from this to partion in partioning map status , we should do a redistribute.
    i have made a redistribute action like this
    1. double click what i want to distribute
    2. select the relevant partition , for example partition 0001
    3 click the execute immediatelly button .
    when i finished , the status is not changed . so i change the redistribute log located in /db2/db2ab7/sqllib/redist/ AB7.NGRP_FACT_AB7.2008022808582 .
    the log message is
    Data Redistribution cannot be continued.
    Error: Redistribution failed with SQLCODE=-6047 (rc=-2145779603).
    the SQL 6047 detail information is like the following. I don't know what happens.
    it's a SAP bug just like the previous issue ? Could you give me some suggestion ? Thanks
    db2 => ? sql6047
    SQL6047N Database partition group cannot be redistributed
    because table "<name>" does not have a partitioning
    key.
    Explanation:
    At least one table in the single-node database partition does not
    have a partitioning key. All tables in the single-node database
    must have a partitioning key before the database partition group
    can be redistributed to a multiple-node database partition
    group.
    The operation was not performed.
    User Response:
    Use the ALTER TABLE command to specify partitioning keys for
    tables that do not have one. Then try the request again

    Before redistribution, do your tables reside on only one partition? Does the error message you get list the table or tables that do not have a partitioning key?
    All fact tables, ODS tables and PSA tables are created with a partitioning key in a SAP BI system. However, in the FACT and ODS tablespace, there are a few BI management tables (name starting with 'RS') that do not get a partitioning key by default if created in a tablespace on only one partition. The BI data distribution wizard in the DBA Cockpit takes care of some of these tables, for example RSDMFACTAB and RSDMODSTAB. Maybe there are some additional ones.
    Please list the names of the tables without partitioning key. If the error message does not contain them, you can get them with the following SQL statement:
    select varchar(tabname,30)
    from syscat.tables a
    where tbspace='<your_tablespace>'
      and not exists (select partkeyseq from syscat.columns b
                             where a.tabschema=b.tabschema and a.tabname=b.tabname
                                      and b.partkeyseq > 0)
    Brigitte

  • BI Publisher Word Template The report does not contain any data fields.

    I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
    Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
    2. Oracle BI Publisher -> Open (I open the report)
    3. Go to Insert -> Table Wizard
    I get this error:
    The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
    Please help

    Hi
    How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
    Please clarify
    Thanks

  • I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.

    I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.
    ===Answer===
    Comment on usual method and solution, by a forum Moderator.
    As long as there are no confounding factors, such as certain extensions, or a user.jsfile the procedure is as follows
    # Open a new tab and type "about:config" in the address bar.
    # In the Search bar type: "newtab"
    # Locate and double click "browser.newtab.url"
    # In the "Enter String Value" box change "'''about:newtab'''" to "'''about:blank'''" and click OK.
    # Verify that the value has changed and now all new tabs will be blank.
    See post under by ''pirate048'' [/questions/976589?page=2#answer-509482] ~J99

    Have to say that I rather agree with Mark..all we want is a simple, unadorned clean page that doe not track and show usage!! WHY NOT!! Is it too simple for developers..we aren't all (nor do we want to be!) software experts! Come on Mozilla..tidy up and clean up..it might be a quicker programme too!!

  • HT4623 My new iPad can no longer connect to the 3G network. I keep getting the message "could not activate cellular date network".

    I updated my new iPad to the iOS 6 while connected to wifi. However, it will no longer connect to the 3G network. I keep getting the message "could not activate cellular data network" even though the 3G symbol appears normal. I have tried rebooting, but it still doesn't work. Please help!

    No. You can't

  • My daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck. help!

    my daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck, home+power for 10-15 seconds. I really would like to not lose everything she has, again, because I can't back it up this time. I have tried charging via a wall outlet and PC and both charge fine, just only to 20%. I am using the cable that came with it so no aftermarket issues there. Please help so I don't have to reset everything again.

    Because once it has charged enough to be powered on as soon as you turn it on it says battery is at 20% and will not charge anymore after that, it just runs for about 5-10 minutes before the battery dies again. The battery cycles discharge/recharge daily and its not on the charger at full charge for more than a couple hours and is never totally dead for more than a couple of hours.

  • HT1338 im on osx snow leopard but the lion is no longer available on app store. How can i still upgrade to lion? my computer by the way is not compatible with mountain lion. thanks

    im on osx snow leopard but the lion is no longer available on app store. How can i still upgrade to lion? my computer by the way is not compatible with mountain lion. thanks

    Hello royalaqua,
    I do think you should ask yourself if upgrading to Lion is the right course to take.
    Snow Leopard is an excellent OS and Lion has literally been frozen out after barely a year.   Remember too that some of your apps may not work with Lion (those that have Rosetta, for example) so that could mean more new purchases.   Plus you may need to uprate your RAM too.

  • IPhoto says it cannot import my photos b/c they may be an unrecognized file or the file may not contain valid data. The operation could not be completed. Error code is: ImageCaptureCoreError-9905.

    Unable to download photos from my camera. iPhoto returns an error message that states: The following files could not be imported (they may be an unrecognized file or the files may not contain valid data). FILE NAME: 100_0490.JPG      REASON: com.apple.ImageCaptureCoreError- 9905.  WHAT'S UP WITH THAT?  Did not have a problem importing photos under the LEOPARD OS, however, now that I have upgraded to Yosemite 10.10.3 the iPHOTO app is not performing the imports.

    Are you using Photos, or iPhoto? Maybe you've got a corrupt file on your camera. I would try using the image capture application to import the bad picture to my desktop. If it works and the picture looks ok,  then delete that pic from the camera, then try to import into iphoto again. You can then import the pic it was saying was bad from your desktop.
    Or, try downloading all the pics using image capture and then import from the download folder.

Maybe you are looking for