There does not appear to be a way to either import or export usernames and passwords in the Firefox password manager. I like to have a paper copy of this information because I'm decrepit and forget these things.

There is no way to copy or export username, password, or website information in Firefox's password manager.

I do not know of a straightforward way of printing passwords.
One method is to use the Password Exporter add-on, with it you can export the passwords to either a CSV or XML files. These files are readable and can be printed off, but do contain superfluous information. If you have a spreadsheet you can open the CSV file in the spreadsheet and then print the passwords from there - https://addons.mozilla.org/firefox/addon/password-exporter/

Similar Messages

I recently acquired Final Cut Pro and my concern is that when attempting to download old footage from cine or standard 8, that is 4:9 aspect. There does not appear to be a way of instructing F C Pro to automatically convert images to 16:9 ratio?

Mac Book Pro version (10.6.i) Snow Leopard.
I am an inexperience user and recently acquired Final Cut Pro to supplement my Imove application.
My question is - How can I instruct F C Pro to automatically convert 4:9 aspect material (old cine and standard 8 recordings) to 16:9 aspect.
At the moment I am adjusting each clip manually to fit 16:9, not a very good way to proceed! I have no problem with Imovie in this respect and wonder if
F C Pro offers the same facillity? Can not find any clues either from Apple store or elsewhere.

You mean 14:9, right?? 8mm film frame aspect ratio is 1.58. I find it hard to believe that your telecined video has the same aspect as the original film unless it has been explicitly trimmed to those dimensions. If that's the case, it's pillarboxed in the 16:9 format or letterboxed in the 4:3 format.
You could try to select all your clips and in the Video Inspector > Spatial Conform, select Fill. This will cause your clips to expand to fill the 16:9 "space". This also means that portions of the edges will "overflow" the boundaries of the modern frame (most likely the top and bottom edges.) It shouldn't be that much and if you're telecined film is letterboxed in 4:3, it will be a lot less so afterwards!
You can also select all your clips, assuming they are all the same dimensions, and adjust the (Video > Transform > ) Scale in "one throw" (if you turn down the disclosure triangle you can adjust width and height independently—I am assuming that since you want it to fit, you don't mind minor stretching.)

HT5163 Hi. Can u use a paperclip instead of the sim tool or will it damage the ipad? There does not appear to be a tool in the box!

There does not appear to be a tool in the box. Can you use a paperclip on the ipad? Will it damage it?
Do you insert it into the edge of the slot or in the hole?

Hello Dan,
Welcome to the Apple Support Communities. Yes you can use a paperclip to eject the SIM card, you just simply press in the tiny hole of the SIM card tray.
iPhone and iPad: How to remove the SIM card
http://support.apple.com/kb/HT5163
Regards,
-Norm G.

Silverfast scanner does not appear in list of available scanners in 'import'

silverfast scanner does not appear in list of available devices in 'import' (elements 12)

First of all, have you installed the TWAIN driver?
TWAIN not installed | Photoshop Elements 9 and later

Time machine does not appear to backup an external HD. how do I get that included in the backup?

time machine does not appear to backup an external HD. how do I get that included in the backup?

In the Finder, press the key combination shift-command-C, or select
Go ▹ Computer
from the menu bar. A window will open showing all mounted volumes. Select the one in question and open the Info window. What is shown as the Format in the General section? If it's not "Mac OS Extended," Time Machine can't back up the volume.

In attempting to burn a playlist onto a new CD, iTunes seems to burn about half the tracks then shuts down and issues an error msg. (4900) - although that msg. has rec'd a lot of attn., there does not appear to be an adequate or workable fix or suggestion

In attempting to burn playlists onto new CD's, iTunes regularly completes half the burn, stops, ejects the CD and issues error msg. #4900. Although there appears to have been similar problems for some time, I cannot locate any suggestions for fixing the problem. I have installed the newest version of iTunes but that does not appear to have any effect on the problem. Thoughts?

I had the same problem after updating my DVD-Drive Firmware.
Disabling the Option to burn "CD TEXT" solved my problem. Hope that helps !!

During the upgrade all bookmarks are gone. There does not appear to be a saved file of the bookmarks.

I have attempted to restore and import the former bookmarks, but I do not know where to look for the files. On a windows XP service pack 2 desktop computer, I upgraded from 3.6 to 15 last night and all bookmarks are gone. Please help me find where to look for them. Thanks

Do you see any JSON backups in the bookmarkbackups folder with a file size large enough that they can contain your bookmarks?
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder
Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can try to check and repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/

TS3988 iCloud continues to asks for email to be verified. Clicking resend verification does not appear to send to my mailbox (either inbox or junk mail). Any other suggestions?

??

I keep getting these emails also and now from Apple when you open them they look official but when I got to the point to enter my bank details I stopped due to a gut feeling that it might be spam. Are these messages span and someone just trying to get your details as they do look real.

The password save prompt box does not appear on logging in to certain password protected webpages; is there another way of adding their passwords to Firefox sync?

Dear Firefox tech supporter,
I am Currently running:
Firefox v6.0.2;
Windows 7 fully updated at 19 Sept 2011 15:45 GMT;
Norton Internet Security 2011 (using Identity Safe) fully updated at same time as Windows 7;
Extensions to Firefox-
Norton Toolbar 2011.7.1.3;
Symantec IPS 3.1;
Add to Amazon Wish List Button 7.1;
Minimap Addon 0.3.13
Plugins
The usual suspects from Microsoft, Adobe, Wacom, Apple and Google, all of which are checked and no updates currently found.
With webpages such as <https://shop.avanquest.com/members/?company_rs=51>, PayPal and Windows Live e.g. after correct login details are entered into the online form and login is performed successfully. The "key" symbol does not appear to the left of the "awesome bar", neither does the password save pop up box and so the login details for the site cannot be saved in Firefox sync.
This is not specific to https secure sites, as I have been able to save the passwords for several https secure sites and conversely, I have been unable to save the passwords for some http non secure URLs. I have ensured that, whilst trying to enter a page or site into Firefox sync, it has the only tab open.
There does not seem to be a way of manually entering website details (URL, User Name, Password etc.) into Firefox Sync; how can I save the password details for such sites?
Thanks in advance for your help,
Chris Morris

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
To see all History and Cookie settings, choose:
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect: [ ] "Always use private browsing mode"
*Tools > Options > Security: Passwords: "Remember passwords for sites"
See also:
*http://kb.mozillazine.org/User_name_and_password_not_remembered
*Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

Having a variety of crashes with the new version of Firefox. There does not seem to be a pattern

Several things have happened since the installation of the latest version of FireFox:
1. Intermittent opening of the browser from the desktop.
a) Opens in safe mode no problem provided shift key is used.
b) Opens sometimes and remains open
i) Sometimes page switches cause the browser to close
ii) Sometimes page switches continue as expected
c) Opens then closes a few seconds later
2. Intermittent opening of project pages from BOINC
a) Sometimes opens and allows browsing of the science projects website
b) Opens then immediately closes
c) Opens and page switches cause the browser to close
There does not seem to be a discernible pattern to what is going to happen each time the browser is opened.
The only crash report I have was submitted November 2010. I am not aware of any crash reports that have been generated for the current problems on my system.
'''System info:'''
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name FASTERMACHINE
System Manufacturer Gigabyte Technology Co., Ltd.
System Model GA-MA770T-UD3
System Type X86-based PC
Processor x86 Family 16 Model 10 Stepping 0 AuthenticAMD ~3322 Mhz
BIOS Version/Date Award Software International, Inc. F8, 10/18/2010
SMBIOS Version 2.4
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name FASTERMACHINE\Greg
Time Zone GMT Daylight Time
Total Physical Memory 4,096.00 MB
Available Physical Memory 1.90 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 4.59 GB
Page File C:\pagefile.sys

My observation so far is that if you just type keywords, Mail wants to search everything. The reason for the missing results, I think, is because the email is not getting indexed properly. If you rebuild, then things get indexed correctly.
I tried your idea with the quote. Now, no matter what I type, I always get a set of options. But I cannot tell if that was enabled by the quote or if it was already going to do that, because now I don't need the quote to get a list of various options. The first, which I've always gotten is "message contains", but now I'm seeing subject suggestions and such.
Very confusing. I'm wondering if spotlight hasn't been doing some incremental work in the background that we don't know about, and some things will just magically start working now.

BPM Application Link does not appear in BPM Workspace (11.1.1.7)

I spent huge amount of time to reveal why does that happens.
All that follows further is valid for BPM Suite 11.1.1.7.
The scenario.
You developed a simple BPM process with Initiator pattern (maybe by following the "Quote Request" tutorial).
But the application link did not appear in BPM Workspace.
Here i'm skipping any kind of mistakes as "oh, incorrect swimlane", "oh, i did not include the user to the app role" and so on.
At first, you should know about the "feature" - You have to attach task form to the Initiator Human Task to see the App Link.
The simplest way to do that is to AutoGenerate task form (and deploy it, of course).
Else the Appication Link will not appear.
One exception to this rule - If your Task HAS NO PAYLOAD (no parameters) the Task Form is not required (to appearing of the Application Link).
The second find is a bug (is think so).
If you edited the Role that Attached to the swimlane of Initiator Task, you will not see the Application Link.
If you look to organization.xml you will see something like this:
        <ns1:applicationRole id="StartTask.InitRole" isProcessRole="true">
            <ns5:name>StartTask.InitRole1</ns5:name>
            <ns1:processRole id="InitRole" name="InitRole1"/>
        </ns1:applicationRole>
The Application Link will appear ONLY IF THE "applicationRole id", "applicationRole name" and "processRole id" have the same value.
When you edit name of the application role in Organization Editor you change "applicationRole name" and "processRole name" values.
After that "applicationRole id" != "applicationRole name" and the Link does not appear.
How to fix?
Just edit organization.xml (with external editor) - change the "applicationRole name" to the value of "applicationRole id".
That allows to have value of "processRole name" something like "The Initiator Role" - that value appears in the BPMN diagram of process.
Also you can edit organization.xml with Organization Editor and set the Name to the value of "applicationRole id".
In that case the associated swimlane will have the same name as the "applicationRole id".
Hope this helps somebody
Oleg

Flash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually.

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. Apple care does not know what is the cause. Please help

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.

I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272

"Edit in Photoshop Elements" does not appear as option in Lightroom 4.3

After viewing this artical:
http://helpx.adobe.com/x-productkb/multi/edit-photoshop-command-missing-photoshop.html and completing all options related to the Mac, the "Edit in Photoshop..." still does not appear as a clckable option in my Lightroom 4.3 program which has all the current updates. Also, my Photoshop Elements 11 program also has all the current updates.
Please note that in the interest of time, that all of the "solutions" were attempted in the above mentioned link
Also, was on hold with Adobe Lightroom help phone support for over 1.5 hours without any agent answeing the phone. Also Adobe automatied phone support states that Photoshop Elements is not supported free of charge and it is fee based. How is a consumer suppose to have a problem corrected in Lightroom that stems from Elements when it is suppose to intergrate that way between the two programs but any help to try to correct the way it is suppose to work will cost you an addition fee in phone support for Elements?
And help on fixing this issue will be apprecitated.
Lightroom v 4.3 / Camera RAW v 7.3
Elements v 11.0 / Camera RAW v 7.3.0.71

Did this with Adobe support in LIVE CHAT, what a waist of time. Although this will correct the issue, it is like a work around and not solving why EDIT IN PHOTOSHOP... is not a clickable option (greyed out) in LR.
After the configure as suggested above, does this preclude and editing in Lighroom?
What I want to do is:
Edit the photo in LR except for:
the useage the great Spot Healing Brush Tool that PSE offers, edit that part of it in PSE then SAVE the results back to LR. Any problems or suggestions for this?
Thanks so much

Presenter 9 installation failed - can't uninstall v.8, does not appear in control panel

I am trying to install Presenter 9, but I am getting an error that says "A conflicting or prerelease version of Adobe Presenter 9.0 exists on this computer. The conflicting version must be removed before installing from the current media.". From what I have read on the forums, I am interpreting this to mean I should uninstall Presenter 8 first. According to the instructions, I should be able to remove it using the Programs and Features control panel, but Presenter does not appear there (if I open PPT it is still there, so I know v.8 is still installed). I have tried using the AdobeCreativeCloudCleanerTool but Presenter does not appear as an option for removal. Can you please tell me how I can uninstall Presenter 8 so I can install Presenter 9? I am using PPT 2010 32 bit and trying to install Presenter 9 32 bit. Thanks.

Yes, I Presenter 7 was installed before Presenter 8. I have Windows 7.
I found my old thread here: http://forums.adobe.com/message/5080369
I followed that. Here is what I have done:
I ran the reg file from http://blogs.adobe.com/captivate/2012/08/resolution-adobe-presenter-8-installer-issue.html
I deleted all the folders and files related to Presenter 7 or 8 in
C Drive> Users > Your User Name>App Data > Local > Adobe >
and App Data > Roaming > Adobe >
I reinstalled everything.
So far so good.

Apple logo does not appear when resetting ipod

Screen froze and ipod beebed. Connected to pc and managed to install restore software. Managed to sync some music to it, but nothing shows on ipod screen. I havet tried to reset the ipod as in the support suggestions but the Apple logo does not appear. Can anyone help please?

When I try to reset by pressing
the hold and menu button, the Apple logo never comes up.
Not surprising really since that's not the way to reset the iPod.
See this.
How to reset the iPod if it appears frozen or is not responding.

There does not appear to be a way to either import or export usernames and passwords in the Firefox password manager. I like to have a paper copy of this information because I'm decrepit and forget these things.

Similar Messages

Maybe you are looking for