There was no endpoint listening at net.tcp:
All,
I keep getting this message when from a client notifies another client. I verified port 9912 is open by telenet to the port. Same software work fine if I reinstall our server or install
the server on other machine. Here is the exception I got when on the net tcp call. We also verify that no firewall or antivirus software running.
THe exception message: {"There was no endpoint listening at net.tcp://mycomputer_name:9912/myApplication.exe-Notification-1 that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException,
if present, for more details."
Does anyone have any suggestion on how what could cause this issue?
Thanks!
Hi PeterFL,
I wonder if you have hosted the WCF net.tcp service in the IIS. By default we can not host WCF net.tcp service in the IIS, if we want to implement it, we need to do some configuration.
For more information, please try to refer to the following articles:
#Hosting in IIS using NetTcpBinding:
http://blogs.msdn.com/b/james_osbornes_blog/archive/2010/12/07/hosting-in-iis-using-nettcpbinding.aspx .
#Hosting WCF Service with netTcpBinding on IIS7:
http://www.codeproject.com/Articles/667618/Hosting-WCF-Service-with-netTcpBinding-on-IIS .
#How to host WCF service with netTcpBinding or netNamedPipeBinding in IIS:
http://dotnetmentors.com/hosting-wcf-service-with-nettcpbinding-or-netnamedpipebinding-in-iis.aspx .
If you do not host the WCF net.tcp service in the IIS, please try to enable the WCF tracing to help find some detailed error information:
#How to enable the WCF tracing:
https://msdn.microsoft.com/en-us/library/ms733025(v=vs.110).aspx .
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
Cannot open files on SharePoint using OWA - There was no endpoint listening at net.pipe
Greetings,
Today we have had people calling in saying that they cannot open their files. After digging in for a bit, we found that if we set the library to open with the client it worked fine, thus OWA is having the issue.
The correlation exception is the following :
There was no endpoint listening at net.pipe://localhost/SecurityTokenServiceApplication/appsts.svc that could accept the message
One user here (
https://ericjfehn.wordpress.com/tag/sharepoint-2013-office-web-apps/ ) suggests reprovisioning the service applications, but that sounds very dangerous, wouldn't that mess up all my services, ie; excel, state service, ssrs, etc.. ?
any help is appreciated!
Thank youRobert,I would recommend to check the configuration of OWA and restart the token services.please check the below links that explains more details on the issue.
http://expertsharepoint.blogspot.de/2013/12/microsoft-office-web-apps-server-2013_19.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
Hi
I am developing SSRS reports, suddenly now I am getting this error when I try to preview a report in the VS 2010 shell:
"This is a designer preview error, "There was no endpoint listening at net.pipe://localhost/PreviewProcessngServcie11108/ReportProcessng that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerExcelption,
if present, for more details. The pipe endpoint 'net.pipe://localhost/PreviewProcessing11108/ReportProcessing' could not be found on your local machine"
The error has come out of the blue, reports which I used to be able to preview, I can't preview anymore.
Anybody knows what to do to make it work again?I tried to apply Mike Yin' answer on this thread
http://social.msdn.microsoft.com/Forums/en-US/38ff8d54-06aa-40c3-8916-378d5185320e/report-designer-preview-in-ssdt-throws-up-a-end-point-not-found-error?forum=sqlreportingservices
Suggestion 1:
Press WinKey+R , input “services.msc” in the Run box, and press enter.
In the local services list, find the “Net.Pipe Listener Adapter”.
If it is stopped, start it. If it is started, restart it.
I found that “Net.Pipe Listener Adapter” was not enabled, so I enabled it and started/restarted it. Now it works again :) -
Remote Domain Join Error - no endpoint listening at CertWebservice.svc
I am trying to remotely connect a windows 8.1 client to a Windows Server 2012 Essentials domain. I do this by navigating to:
https://remote.mydomainname.com/connect/
The connector downloads and starts fine but after user authentication, fails with the following error in the log file:
[5644] 140326.163326.4949: ClientSetup: Running ValidateUser Tasks at WizardPage DomainUserCred
[5644] 140326.163326.4959: ClientSetup: Entering ConnectorWizardForm.RunTasks
[5644] 140326.163326.4959: ClientSetup: Running Task with Id=ClientDeploy.ValidateUser
[5644] 140326.163326.5009: ClientSetup: Entering ValidateUserTask.Run
[5644] 140326.163326.5009: ClientSetup: Validating User
[5644] 140326.163326.5009: ClientSetup: Call MachineIdentityManager.GetMachineStatus
[5644] 140326.163347.5857: ClientSetup: MachineIdentityManager.GetMachineStatus had errors: ErrorCatalog:ProviderNotAvailable ErrorCode:-1
BaseException: Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityException: MachineIdentityManager.GetMachineStatus ---> System.ServiceModel.EndpointNotFoundException: There was no endpoint listening at
https://acesrv01:65500/CertWebservice.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. ---> System.Net.WebException:
Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to
respond 192.168.8.11:65500
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
I have made sure that the firewall on the server has port 65500 open. The router is set to forward all requests on port 443 to the server.
Any advice would be great
Regards
BobbyHi Bob,
Sorry for my delay.
Based on your description, I understand that you have verified port 65500 was opened on server. Meanwhile,
be unable to browse https://acesrv01:65500/CertWebservice.svc
on client. If I misunderstand, please don’t hesitate to let me know.
Based on current situation, please check Windows Firewall profile. Windows Firewall profile may block access
to the CertWebservice.svc website. Please disabled Windows Firewall profile on server and then monitor the result.
Hope this helps.
Best regards,
Justin Gu -
Default Security for net.tcp endpoints
I'm using a net.tcp endpoint on a service running on a server on the company domain. I have a client that has been joined to the domain, but which is now outside the company intranet, so it is unable to reach the domain controller. My thought was that since
it would not have connectivity to the domain controller, it would not be able to authenticate with the service, but the client is able to authenticate just fine. Are the credentials still secure when this is the case and is there any security concerns I should
be aware of?
Client Configuration:
<system.serviceModel>
<bindings>
<netTcpBinding>
<binding name="NetTcpBinding_IMyService">
</binding>
</netTcpBinding>
</bindings>
<client>
<endpoint address="net.tcp://mydomain.com:1234/MyTCPService"
binding="netTcpBinding" bindingConfiguration="NetTcpBinding_IMyService"
contract="MyService.IMyService" name="NetTcpBinding_IMyService">
</endpoint>
</client>
</system.serviceModel>
Server Configuration:
<system.serviceModel>
<behaviors>
<serviceBehaviors>
<behavior name="ServiceBehavior">
<serviceMetadata httpGetEnabled="false" httpsGetEnabled="false" />
<serviceDebug includeExceptionDetailInFaults="true" />
</behavior>
</serviceBehaviors>
</behaviors>
<services>
<service behaviorConfiguration="ServiceBehavior" name="MyService.MyService">
<endpoint address="net.tcp://localhost:1234/MyService" binding="netTcpBinding" bindingConfiguration="" contract="MyService.IMyService" />
</service>
</services>
</system.serviceModel>Hi Colin O'Brien,
By default the NetTcpBinding will use the transport security and the default client credential type for NetTcpBinding is the Windows Authentication. In order to use the Windows Authentication, both client and server must be in the same domain, or they should
in a trusted domains.
If both client and server were on the same domain, WCF would handle the mechanics of Windows Authentication "behind the scenes". If you don't have mutually trusting client and server domains, then the client and server must have some other way
to determine if they trust each other with their keys.
In one word is that in order to use the security over the NetTcpBinding, both of client and server must be within a domain (or in trusted domains) or it must have a key exchanging certificate.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I am trying to listen BBC radio news from BBC App, but on pressing the button "live radio" I always get the error "there was an error playing this radio feed". What is the source of this error and how can I remove it?
That is probably just a generic error message and you might not ever know what is causing it. Assuming that you have been able to play live radio with the app in the past (I know nothing about the app) and assuming that all other Internet related functions (Safari, email, etc.) are working properly on your iPad, quit the app completely and reboot your iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that fails to resolve the issue, you might want to reboot your router, unplug it for about 30 seconds and then plug it in again. -
Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.
I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.
-
"There was a problem downloading the software for "my iPod Touch". The net
Cannot get 4.1 software, nor can I restore original settings without getting this. I have uninstalled, and reinstalled twice.
"There was a problem downloading the software for "my iPod Touch". The network connection timed out.Welcome to the discussions,
did you check your security software settings, to make sure that your computer can contact the Apple server during the install process? http://support.apple.com/kb/TS3125 -
WCF net.tcp binding Opentimeout not firing
I have a WCF service with net.tcp endpoint. I have been using reliable session. In one of our production scenario, the web server was down and in this case the client systems was trying to establish a connection with the service. The clients were stuck up
at this point without raising any timeout errors. I wanted to know why there was no timeout exception raised during this scenario when the server is hung and not responding.
Note : The timeout values are set to its default values and the send timeout is set to infinite.Hi sabarish.m,
I think it is maybe because that you have set the sendTimeout value to infinite, as far as I known the sendTimetout is the timeout that specifies how long the client can wait for the transport to complete data writing until throwing exception. It is
a client side setting. You can try to set the sendTimeout value to 1min to test if it throws the timeout exception.
For more information, please try to refer to the following article:
#Binding.SendTimeout Property:
https://msdn.microsoft.com/en-us/library/system.servicemodel.channels.binding.sendtimeout(v=vs.110).aspx .
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Getting a "Could not find a base address that matches scheme net.tcp"
I've written several WCF services which use HTTP (and its variants). Now I'm trying to learn how to write a WCF service which will use TCP. I'm using Andrew Troelsen's book, "Pro C# 2008 and the .NET 3.5 Platform" as a guide (chapter 25). I've asked questions related to this before on a much more complicated WCF service, so I decided to write a simple WCF service to learn how to do it, rather than work on my more complicated WCF service. Coincidentally I chose the same routine as Troelsen did in his book, although in my case I called the WCF service SimpleAdd.
Anyway, after writing the WCF service, I then wrote the Windows Service to host it. I then installed it, and the installation went fine. When I tried to run the service, the service started but then immediately stopped. I checked the event log and found the following message in it:
"Service cannot be started. System.InvalidOperationException: Could not find a base address that matches scheme net.tcp for the endpoint with binding MetadataExchangeTcpBinding. Registered base address schemes are [http]."
Here's the interface code for my SimpleAdd:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Runtime.Serialization;
using System.ServiceModel;
using System.Text;
namespace SimpleAdd
// NOTE: If you change the interface name "IService" here, you must also update the reference to "IService" in App.config.
[ServiceContract]
public interface IService
[OperationContract]
int Add(int FirstNumber, int SecondNumber);
Here's the code for the implementation (I'm leaving out the using statements):
namespace SimpleAdd
// NOTE: If you change the class name "Service" here, you must also update the reference to "Service" in App.config.
public class Service : IService
#region IService Members
int IService.Add(int FirstNumber, int SecondNumber)
return (FirstNumber + SecondNumber);
#endregion
And here's the App.Config file for the service:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<system.web>
<compilation debug="true" />
</system.web>
<!-- When deploying the service library project, the content of the config file must be added to the host's
app.config file. System.Configuration does not support config files for libraries. -->
<system.serviceModel>
<services>
<service behaviorConfiguration="SimpleAdd.ServiceBehavior" name="SimpleAdd.Service">
<clear />
<endpoint binding="wsHttpBinding" contract="SimpleAdd.IService"
listenUriMode="Explicit">
<identity>
<dns value="localhost" />
<certificateReference storeName="My" storeLocation="LocalMachine"
x509FindType="FindBySubjectDistinguishedName" />
</identity>
</endpoint>
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"
listenUriMode="Explicit">
<identity>
<!--
<certificateReference storeName="My" storeLocation="LocalMachine"
x509FindType="FindBySubjectDistinguishedName" />
-->
</identity>
</endpoint>
<endpoint address="net.tcp://localhost/SimpleAdd/" binding="netTcpBinding"
bindingConfiguration="" contract="SimpleAdd.IService" />
<host>
<baseAddresses>
<add baseAddress="http://localhost:8731/Design_Time_Addresses/SimpleAdd/Service/" />
</baseAddresses>
</host>
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="SimpleAdd.ServiceBehavior">
<serviceMetadata httpGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="false" />
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
</configuration>
I don't think it will matter much, because I believe the problem probably lies in the App.config file for the Windows service, but just in case, here's the code for the AddWinService (without the using statements):
namespace WindowsAddService
public partial class AddWinService : ServiceBase
//A member variable of type ServiceHost. (I'm using the "Pro C# 2008" book as reference for this.)
private ServiceHost myHost;
public AddWinService()
InitializeComponent();
protected override void OnStart(string[] args)
//just to be really safe
if (myHost != null)
myHost.Close();
myHost = null;
//create the host
myHost = new ServiceHost(typeof(SimpleAdd.Service)); //I've included the class from SimpleAdd, which isn't in the book!!!
//open the host
myHost.Open();
protected override void OnStop()
//shut down the host
if (myHost != null)
myHost.Close();
And lastly, here is the App.Config file from my AddWinService:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<system.serviceModel>
<client>
<endpoint address="net.tcp://localhost/SimpleAdd"
binding="netTcpBinding"
contract="SimpleAdd.IService"
name="netTcpBinding_IService" />
</client>
<services>
<service name="SimpleAdd.Service"
behaviorConfiguration="SimpleAddMEXBehavior">
<!-- Enable the MEX endpoint -->
<endpoint address="mex"
binding="mexTcpBinding"
contract="IMetadataExchange" />
<host>
<!-- Need to add this so MEX knows the address of our service. -->
<baseAddresses>
<add baseAddress="http://localhost:8731/Design_Time_Addresses/SimpleAdd/Service/" />
</baseAddresses>
</host>
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="SimpleAddMEXBehavior">
<serviceMetadata httpGetEnabled="true" />
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
</configuration>
So, where have I gone wrong?
RodHello Richard,
Well, I've tried making the change to the MEX point for net.tcp, but now when I try to start the service I get the following error in the event log:
Service cannot be started. System.InvalidOperationException: Service 'SimpleAdd.Service' has zero application (non-infrastructure) endpoints. This might be because no configuration file was found for your application, or because no service element matching the service name could be found in the configuration file, or because no endpoints were defined in the service element.
I am sure the problem lies with what I've put into the app.config file. My app.config file now looks like this:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<system.serviceModel>
<client>
<endpoint address=""
binding="netTcpBinding"
contract="SimpleAdd.IService"
name="netTcpBinding_IService" />
</client>
<services>
<service name="SimpleAdd.Service"
behaviorConfiguration="SimpleAddMEXBehavior">
<!-- Enable the MEX endpoint -->
<endpoint address="mex"
binding="mexTcpBinding"
contract="IMetadataExchange" />
<host>
<!-- Need to add this so MEX knows the address of our service. -->
<baseAddresses>
<add baseAddress="net.tcp://localhost/SimpleAdd" />
</baseAddresses>
</host>
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="SimpleAddMEXBehavior">
<serviceMetadata httpGetEnabled="false" />
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
</configuration>
I've also tried using this for the <client> tag under <system.serviceModel>:
<client>
<endpoint address="net.tcp://localhost/SimpleAdd"
binding="netTcpBinding"
contract="SimpleAdd.IService"
name="netTcpBinding_IService" />
</client>
But that gives me the same error in the event log.
So, what have I done wrong now?
Rod -
Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService
All the Exchange 2013 Prerequisites appeared to install correctly. The installation of Exchange 2013 on Windows Server 2012 hangs at Initializing Setup. Then I find event 4027, source MSExchange ADAccess in the application event log. The
same thing happens if I try to prepare the Active Directory from the command prompt. The old Exchange 2007 server and Active Directory Server are on the same network and all firewalls are off. The entire content of the event is below. Any ideas
appreciated.
Log Name: Application
Source: MSExchange ADAccess
Date: 1/30/2014 12:47:01 PM
Event ID: 4027
Task Category: (1)
Level: Error
Keywords: Classic
User: N/A
Computer: MAILSRV2.sescolighting.com
Description:
The description for Event ID 4027 from source MSExchange ADAccess cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ExSetupUI.exe
3868
Get Servers for sescolighting.com
TopologyClientTcpEndpoint (localhost)
3
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.0038715. TCP error code 10061: No connection could be made because
the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient()
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange ADAccess" />
<EventID Qualifiers="49156">4027</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-01-30T17:47:01.000000000Z" />
<EventRecordID>821</EventRecordID>
<Channel>Application</Channel>
<Computer>MAILSRV2.sescolighting.com</Computer>
<Security />
</System>
<EventData>
<Data>ExSetupUI.exe</Data>
<Data>3868</Data>
<Data>Get Servers for sescolighting.com</Data>
<Data>TopologyClientTcpEndpoint (localhost)</Data>
<Data>3</Data>
<Data>System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.0038715. TCP error code 10061: No connection
could be made because the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient()
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)</Data>
</EventData>
</Event>
Tina M. White Boundless DataHello,
Please make sure whether you install exchange 2013 on a DC server. If so, we don't recommend you install Exchange 2013 server and DC server on a server.
Please use ping to check if the server you will install exchange 2013 server on can communicate with DC server.
Please use telnet to check if 890 port is opened on your firewall.
Besides, please refer to the following article to check if you have installed required components again.
http://technet.microsoft.com/en-us/library/bb691354(v=exchg.150).aspx
Cara Chen
TechNet Community Support -
I am trying to invoke remote debugger on an Azure worker role cloud service, following the example of
http://msdn.microsoft.com/en-us/library/azure/ff683670.aspx
But on attaching the remote debugger for the cloud service instance
Microsoft Visual Studio
There was a failure to launch the remote debugger.
OK
According to somebody else's extra coverage on the topic, there are extra ports 4016/4017 that need to be taken care of (but do they have to be exposed externally)?
http://developers.de/blogs/damir_dobric/archive/2014/02/04/behind-windows-azure-remote-debugger.aspx
So servicedefinition.csdef gets
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="http" port="80" />
<InputEndpoint name="RemoteDebugger" protocol="tcp" port="4016" localPort="4016" />
<InputEndpoint name="RemoteDebugger2" protocol="tcp" port="4017" localPort="4017" />
<InstanceInputEndpoint name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Connector" protocol="tcp" localPort="30398">
<AllocatePublicPortFrom>
<FixedPortRange min="30400" max="30424" />
</AllocatePublicPortFrom>
</InstanceInputEndpoint>
<InstanceInputEndpoint name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Forwarder" protocol="tcp" localPort="31398">
<AllocatePublicPortFrom>
<FixedPortRange min="31400" max="31424" />
</AllocatePublicPortFrom>
</InstanceInputEndpoint>
</Endpoints>
Serviceconfiguration.cscfg gets
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Connector.Enabled" value="true" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Connector.Version" value="2.3" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.ClientThumbprint" value="THUMBNAIL" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.ServerThumbprint" value="THUMBNAIL" />
</ConfigurationSettings>
<Certificates>
<Certificate name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.TransportValidation" thumbprint="THUMBNAIL" thumbprintAlgorithm="sha1"
/>
</Certificates>
But all these are to no avail; the same error still pops for Visual Studio 2013 Update 4; Azure SDK 2.3
Anybody regularly perform remote debugging for Azure cloud services?
The melody of logic will always play out the truth. ~ Narumi Ayumu, SpiralAnd, how do I control that in Visual Studio?
All I get is the Attach Debugger... context menu option in the Azure cloud service nodes in Server Explorer. That is where it is failing. There are no customisable options.
Because of that, the Attach to Process dialog box is unable to retrieve the list of processes (to debug) in the remote worker role instance server.
I tested a blank-template worker role project and published to a new cloud project, and this simplistic copy had no problems with the Remote debugger.
Now the question is, what is it about this real-world project/cloud service that is different from blank sample? From what I compare between what I think are the relevant settings, there are none.
ServiceDefinition.csdef
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
<Import moduleName="RemoteDebuggerConnector" />
</Imports>
<Contents>
<Content destination=".\">
<SourceDirectory path="D:\Projects\experiments\workerrole1\workerrole1\rcf\Debug\RemoteDebuggerContent\" />
</Content>
</Contents>
<Endpoints>
<InstanceInputEndpoint name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Connector" protocol="tcp" localPort="30398">
<AllocatePublicPortFrom>
<FixedPortRange min="30400" max="30424" />
</AllocatePublicPortFrom>
</InstanceInputEndpoint>
<InstanceInputEndpoint name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Forwarder" protocol="tcp" localPort="31398">
<AllocatePublicPortFrom>
<FixedPortRange min="31400" max="31424" />
</AllocatePublicPortFrom>
</InstanceInputEndpoint>
</Endpoints>
ServiceConfiguration.cscfg
<ConfigurationSettings>
<Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="DefaultEndpointsProtocol=https;AccountName=storage;AccountKey=" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.Enabled" value="true" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountUsername" value="" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountEncryptedPassword" value="" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountExpiration" value="2015-12-31T23:59:59.0000000+08:00" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteForwarder.Enabled" value="true" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Connector.Enabled" value="true" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Connector.Version" value="2.4" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.ClientThumbprint" value="" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.ServerThumbprint" value="" />
</ConfigurationSettings>
<Certificates>
<Certificate name="Microsoft.WindowsAzure.Plugins.RemoteAccess.PasswordEncryption" thumbprint="" thumbprintAlgorithm="sha1" />
<Certificate name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.TransportValidation" thumbprint="" thumbprintAlgorithm="sha1" />
</Certificates>
The melody of logic will always play out the truth. ~ Narumi Ayumu, Spiral -
Cannot place order ERROR: "There was a problem adding your product to cart"
Hey guys,
Well, once again Best Buy's online system is preventing me from making an order. It seems like nearly every time I log in I experience some new problem. This time, I'm unable to add anything to my cart. It doesn't matter what item I try to add to my cart or what browser I use or if I clear cookies...it happens every time, on every browser, with every product in the store. The error shows a red & white triangle with a message "There was a problem adding your product to cart".
Just to clarify ahead of time: 1) I have already tried signing in using 4 different browsers (explorer, firefox, chrome, opera) & they all give the same error; 2) Prior to posting here I researched this problem & found out it is somewhat common & has been occurring since at least 2012 on BestBuy.com; 3) Every time someone posts in here about this problem, customer service offers the same "fix" every time - to sign out, clear their browser cache of cookies, shut down the browser, restart the browser, sign back in, etc.... The only problem is, this "solution" has not worked ONE time our of the many times this problem has cropped up in here over the past 3+ years. Why this "solution" keeps getting told to people even though it never works is beyond me. But, there you have it.
Just to clarify: I have already tried this solution, And just like with everyone else before me, it didn't work for me either. So, what's the next step? There must be something else that can be done other than waiting a couple more days for it to magically fix itself (it seems that is the only thing that ever "works"...is to let several days go by and the problem ends up getting fixed in some back-end server-side patch up).
What I'm hoping for from you is a solution that can fix this immediately. This problem has already prevented me from making a couple purchases for items that were temporarily on sale over the past couple days. So, those are lost sales for Best Buy. What I'm hoping to do now is pre-order the Elder Scrolls Online (PS4) in order to take advantage of the $10 pre-order reward. The game releases on Tuesday the 9th. So, in order to get this done in time I need to place the order sometime today (on the 8th).
With all these repeated technical problems making purchasing a chore & wasting my time every single time I want to buy a product it's almost as if Best Buy is telling customers "We don't care if our online system works reliably...go spend your money at Amazon instead". lol
Thank you in advance for your timely help on this matter.
-Marc (removed per forum guidelines)Hello mjswooosh,
I'm very disheartened to hear that you've had ongoing problems when attempting to order from BestBuy.com. Our goal is ever to provide a fun and efficient shopping environment! Certainly creating aggravation serves neither you nor us and I apologize sincerely for this having been your experience.
We recommend the troubleshooting steps you mentioned (i.e., clearing the browser cache, deleting temporary internet files and cookies) because this is the most common cause of this type of problem. I too have encountered this issue from time to time and these steps have almost always resolved the problem. I say almost always because there's one further step you can try: ensure that you have signed out of BestBuy.com, then perform the browser maintenance steps we've recommended. Afterward, before signing in to BestBuy.com, add your desired items to your cart and sign in as part of the checkout process. When the standard steps have not netted a resolution for me, this has solved the problem each time.
I hope this helps. I'm very grateful that you took the time to write to us with your concerns and for sharing your very valuable feedback about your online experience.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message -
Unable to load the Vertipaq engine because there was a COM exception while loading
I saw a similar thread on the forum but it's a dead end.
PowerPivot for Excel 2010 gives me this error whenever I click the PowerPivot window icon:
Unable to load the VertiPaq engine because there was a COM exception. This might happen if you load a workbook on a corrupt installation. To fix the problem, uninstall and then reinstall PowerPivot. Click Details for more error information.
============================
Error Message:
============================
Could not load file or assembly 'msmgdsrv, Version=9.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
The type initializer for 'Microsoft.AnalysisServices.BackEnd.DAXServices' threw an exception.
============================
Call Stack:
============================
at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadSafeSandboxAfterConnection(String errorCache)
at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadSafeSandboxAfterConnection(String errorCache)
at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadOLEDBConnection(Boolean raiseCompleteEvent, String errorCache)
============================
I've tried everything that was suggested so far: uninstall and reinstall PowerPivot, Microsoft Office 2010, and all of the prerequisites for PowerPivot (NET Framework 4.0, Visual Studio) and it still gives the same error message.
Thing is, I don't think it is a PowerPivot issue because many people in the office use PowerPivot and they all receive the same error message.
We are all running on Windows 7 Pro 64-bit.
Any help and/or assistance would be greatly appreciated.
Thanks,
Seong LeeI saw a similar thread on the forum but it's a dead end.
PowerPivot for Excel 2010 gives me this error whenever I click the PowerPivot window icon:
Unable to load the VertiPaq engine because there was a COM exception. This might happen if you load a workbook on a corrupt installation. To fix the problem, uninstall and then reinstall PowerPivot. Click Details for more error information.
============================
Error Message:
============================
Could not load file or assembly 'msmgdsrv, Version=9.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
The type initializer for 'Microsoft.AnalysisServices.BackEnd.DAXServices' threw an exception.
============================
Call Stack:
============================
at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadSafeSandboxAfterConnection(String errorCache)
at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadSafeSandboxAfterConnection(String errorCache)
at Microsoft.AnalysisServices.XLHost.Addin.InProcServer.LoadOLEDBConnection(Boolean raiseCompleteEvent, String errorCache)
============================
I've tried everything that was suggested so far: uninstall and reinstall PowerPivot, Microsoft Office 2010, and all of the prerequisites for PowerPivot (NET Framework 4.0, Visual Studio) and it still gives the same error message.
Thing is, I don't think it is a PowerPivot issue because many people in the office use PowerPivot and they all receive the same error message.
We are all running on Windows 7 Pro 64-bit.
Any help and/or assistance would be greatly appreciated.
Thanks,
Seong Lee -
In the original version of the Podcasts app there was an "Unplayed Episodes" list that listed ALL the episodes of ALL the podcasts I had loaded on to my device, and I could listen to them in chronological order from oldest to newest.
In the new Podcasts update I see a list called "All Unplayed" but when I select a podcast from there it plays all the episode of JUST THAT podcast, without switching between podcasts to whatever episode on my device is chronologically next.
Is there a way to listen to my podcasts chronologically across Podcast series and I'm just missing it or did Apple screw the pooch on this one?Please, please, please... I wonder if the solution of deleting the Podcast App and using the Music App again would work. My favorite sports radio station splits up their podcasts by DJ (logical), but I want to listen to all podcasts from one day from all DJs. No longer automatic :(
Apple developers, if you read this please add this feature - you had it in Music App.
Maybe you are looking for
-
I have copied everything from my external hard drive (which is where I told iTunes my library was) to my iMac. I am now viewing all my content BUT all the user experience is not there (playlists, number of plays, etc). Can you help? I also noticed th
-
How to increase recent call list in i phone 5s
how to increase recent call list in i phone 5s
-
I searched the forum for something on this, but I couldn't find anything. Here are the steps to recreate the problem: 1) Create a Welcome page. 2) Select "Show Layout" from the View Menu. 3) On the Page palette of the Inspector, create a 200 pixel he
-
Impact of upgrading SAP 4.6C to ECC6.0 to Java application
Hi, Currently, my Java application is: 1. using SAP 4.6C as backend 2. using Java 1.4 3. using SAP Enterprise Connector in SAP Netweaver Developer Studio 7.0.15 to generate the BAPI proxies 4. using JCo 2.1.8 If now the backend SAP system is going to
-
Why won't iTunes open? It's been deleted and redownloaded seven times now!
I used to have my iTunes on a mac and it worked just fine.. but I had to switch everything over to my computer, which is a pc... so I had to re-format my nano. That, as you know, deleted all of my songs. I downloaded iTunes 7.. it wouldn't open... I