"This disc could not be verified" error when burning CDs

Every time I try to run the CD Burner, the disk seems to finalize then I get this error message:
*This disc could not be verified and might be unreliable. Try again using a new, blank disc. (Error code 0x80020063).*
I have tried with many blank disks and different data (text files, music files, etc). The CDs I am using are blank Memorex CD-RWs.
This machine is using a Matshita DVD-R UJ-845, here's the rest of the info from the System Profiler if it helps:
MATSHITA DVD-R UJ-845:
+Firmware Revision: DBN9+
+Interconnect: ATAPI+
+Burn Support: Yes (Apple Shipping Drive)+
+Cache: 2048 KB+
+Reads DVD: Yes+
+CD-Write: -R, -RW+
+DVD-Write: -R, -RW, +R, +R DL, RW
+Write Strategies: CD-TAO, CD-SAO, DVD-DAO+
+Media: Insert media and refresh to show available burn speeds+
What can I do to get my CD burner working?

All good suggestions...thanks to all of you weighing in. I have had no issues buring DVDs or CDs (7 months) until this week and am a bit puzzled. Since this verify issue popped up, I've tried buring data from various sources and had some success. As such, I suspect it's not a hardware problem.
I was able to review 1500 JPEGS burned to 1 DVD one-by-one until I found the single file that was an issue. I did this on an XP machine and got a 'cyclic redundancy' error which leads me to believe that I've got a software problem tied to a recent update.
That file is not corrupted at the source and can be copied individually without issue. I've varied burn speeds, media types, file types and data sources and have not been able to identify why 3 of 11 have worked.
The first DVD I burned using dic utility at 4x worked. I felt good that I had a workaround to burning via finder but 3 subsequent attempts with disc utility have failed, too.

Similar Messages

  • Configuration could not be verified error when connect to Cox

    Hi,
    I'm trying to connect to Cox but keep getting the "configuration could not be verified" error. I can access my Cox account through web mail and I've retyped and retried my email address and password enough times to be confident that it's correct. I've also verified my account settings (incoming/outgoing server and ports) with Cox support, and I've checked the my firewall and antivirus settings (norton 360). No luck with anything.
    I'd really appreciate any thoughts anyone has!
    Thanks,
    David

    I should have added that my Cox connection has been set up several years now with no problems but suddenly quit working. I checked everything I know to check, including firewall settings, and finally deleted email account and tried to set it up again. Still getting the same error.

  • "Could not create ac3" error when burning Blu-ray

    I've spent the last week designing a Blu-ray in Encore CS5.  Upon burning, I was given the error message "Cannot create '_sessionfiles_Dsf_session_1_audio.ac3", and the burn failed (after going for seven hours).  I really don't even know where to begin with this.  The Blu-ray is about 80% full (20 GB) and includes multiple timelines and several menus (one of which has audio).  No pop-ups.  It should be a fairly straightforward project.  However, it's given me problem after problem and has taken way too much time.  Can anyone offer insight before I spend another week tracking down the problem?  Thanks.

    In the last few days, things have gone from bad to great and back to bad, and it's been non-stop work.  I freed up a ton of space on the computer and backed it up.  Then the computer gave me a kernel panic, which happened so often that I had to restore the whole computer.  I don't know if that's related to the Encore issue.  Then I tried to burn again, and it seemed to be working until it gave me an error message that said "Blu-ray Error: 'device error', code '3', Note: ".  So I looked around online and decided to export as an ISO disc image file.  That worked fine.  Then I tried burning a Blu-ray using third-party software, which failed halfway through.  Next I tried burning using Disc Utility.  It got all the way to the end and said "Could not verify" and failed.  I tried playing it in my Blu-ray player anyway.  For the first time, it actually worked.  The movie and the Scene Selection menu work fine.  But when I try to go to Special Features, nothing happens.  The Blu-ray is supposed to go to the Special Features menu at the end of the main movie, but it just goes to a black screen after that and locks up.  Now I'm really lost.  Any more suggestions?  Thanks.

  • Script Repository "publisher could not be verified" error

    Hello,
    I'm trying to add a script to the script repository, but when I test it to download it, I get the "publisher could not be verified" error. My script is not signed. I do not get this error when downloading other user's scripts, even though
    their scripts are not signed either. Is this an issue with signing my script? Why does my script receive this "publisher" error while other scripts do not? I don't want to scare users away with a big red error when they try to download my script!

    Not a scripting issue.
    You likely need to either zip the script or give it a different extension.  The message is from your browser not from the repository.
    ¯\_(ツ)_/¯

  • "The attempted operation failed. An object could not be found" error when double clicking on an ics file

    Operation System: Windows 8 Pro
    System Type: 64-bit Operating System
    Office: MS Office Professional Plus 2013
    I am getting "The attempted operation failed. An object could not be found" error when I double click on an .ics file to an appointment to my calender. My outlook.com account's data file is set as default and this error only occurs if
    that is the default data file. I thought that maybe my profile is corrupted. So, I opened up a new profile with the below steps and only add my outlook.com account there:
    1-) Open up the Control Panel and go to Mail section
    2-) Click "Show Profiles"
    3-) Click "Add" and give a name to your profile.
    4-) Configure your outlook.com account (with Auto Account setup, not manual steps)
    5-) Finally, set that profile to be used always.
    Then, I opened up the Outlook 2013 and clicked on the .ics file to add that appointment but got the same error.
    Is this a known issue or specific to me?
    Thanks!

    yes, I have the same problem.
    The workaround of saving the ICS file and then importing it into the current calendar
    works, 
    but the ICS calendar
     displays in other section, NOT in the section of my old events.
    why  ??

  • "This organization could not be verified as a legal entity." with correct, verified information.

    Trying to sign up our company in the iOS Developer Program.  I filled out all the information correctly but still receive the error "This organization could not be verified as a legal entity.".
    I even used Apple's pop-out window to look up my company and find our D-U-N-S NUMBER:069013226
    Additionally, I have verified all the other information is correct on DnB.com
    What can I do to correct this error and enroll my company into the iOS Developer Program?
    Thanks,
    Matt

    I did not see anything about faxing information to them.  Purhaps because I chose this option? :
    "Yes, I am the owner/founder and have the legal authority to sign and bind my company to Apple Developer Program legal agreements and contracts."

  • How do I resolve a "This document could not be signed" error?

    How do I resolve a "This document could not be signed" error?  I received this error when trying to sign a document with multiple signature boxes.  This particular box locks down most of the document.  It's normally not an issue, but periodically we have a copy of this same form that does not work.

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • "Could not complete scan" error when using Windows Fax and Scan

    "Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
    Printing is fine.
    When using the HP Scan application, get the error "Scanner communication cannot be established".
    When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
    "The scan could not be completed due to one or more of the following issues:
    Connection to the computer is lost
    The scanner is in use
    OCR application is not installed"
    My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
    Originally ran Windows 8.0; recently upgraded to Windows 8.1.
    Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
    There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
    On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
    I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
    The printer has a static IP address;
    Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
    Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
    The printer has been plugged directly into the power socket.
    With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
    Appreciate any insights into this problem.
    I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
    Any ideas?
    regards,
    Motorbike

    You can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible.  If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
    Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC . 
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en​...
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HT1473 iTunes message saying the song names for this cd could not be found online when it's iTunes store, What's up with that?

    I just purchased The Very Best Of Eagles CD, Popped it into my drive so excited to own the copy but when I tired to copy it to my Library I get this message saying the song names for this cd could not be found online when it's in the iTunes store, What's up with that?    Is there any way to get track information and artwork without Having to manually inter all the info?  

    iTunes gets track information from Gracenote's database, so iTunes must be able to reach gracenote.com and the CD must have been entered there by some purchaser already (all CD information in Gracenote is provided by we users). If these are common, commercially-distributed CDs, it may be that there is a firewall or privacy filter blocking access to gracenote.com. If these are unusual, independently-released or rare CDs, they just may not be in Gracenote yet. In the case of a custom CD where it's a compilation, Gracenote probably won't be able to identify them (it goes by complete albums, comparing the number and length of the tracks to try and figure out what album it is).
    Hope this helps.

  • Error: This disc could not be read from or written to....

    Hi,
    Just got a new ipod video 30g. When transferring songs, fails after a while....transfers some songs then this error pops up:
    "Attempting to copy to the disk 'Joe's Ipod'failed. The disc could not be read from or written to."
    I've searched this in the help section and this page comes up:
    http://docs.info.apple.com/article.html?artnum=301267
    But my computer software is very minimal..and Windows XP is up to date. Cords appear fine and not loose...
    HAVE NO IDEA What the problem is. I've tried restoring it to original settings. I've even reinstalled iTunes...
    Anyone know what to do?
    Is my iPod just faulty?
    Ipod video 30g   Windows XP  
      Windows XP  

    Hey there,
    Have you tried any of the troubleshooting techniques from below? Check it out. Hope it helps.
    http://support.apple.com/kb/HT1207
    B-rock

  • SQL version could not be verified error while installing the SCOM 2012 R2 reporting component

    I have the below SCOM server roles in my SCOM 2012 R2 set up
    1) All servers with Windows Server 2008 R2 SP1, MS - SCOM1, DB & DW - DB1, Reporting Server - DB2
    2) All the DB servers with SQL 2012 SP1
    3) Windows firewall is turned off on all the servers.
    4) Success fully installed all the components except SCOM reporting.
    While installing the SCOM 2012 R2 reporting component on DB2 ( Iam running this set up on the server where I instllaed the SQL DB engine and reportin services in Native mode. Configured the SQL reporting database and reporting URLs successfully in SQL reporting
    configuration manager) getting the below error in the Rporting server instance page. Kindly advise.
    I ran mofcomp.exe and there is no firewall restrictions. My account also has DB owner & sysadmin permissions.
    Also tried re installing the SQL on Reporting server.
    "The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
    Configurations document for further information".

    Hi,
    As far as I know, after installing SSRS, we don't need to configure the database and reporting URLs manully. When we install the reporting service for SCOM, it will configure those automatically.
    If possible, you may re-install SSRS and then install SCOM reporting service.
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • "license file for this version could not be found" message when trying to install latest version of Firefox

    I keep trying to install Firefox 3.6.10, and it seems to work, but then when it comes time to accept the user agreement, that option is grayed out and I can only go back. In the Software License Agreement box is the following message: "The license file for this version could not be found. Please visit Firefox homepage for more information."

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.<br />
    Don't remove personal data when uninstalling.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
    Your above posted system details show outdated plugin(s) with known security and stability risks.
    # Shockwave Flash 10.1 r82
    # Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

  • Backup discs could not be read error occurred (-50). HELP!

    I'm using itunes 9.0.2; running Windows XP on Oracle Virtual Box in Ubuntu 10.04. the latest itunes will not work and 9.0.2 is the closest i can get.
    One out of 4 backup discs contains only the itunes purchases and it works but a message pops up: +'could not restore some of the files from the play-list'+, +'they may be on other backup discs'+ even though all the songs on disc play. I put the next disc in and the following message pops up: +'the disc cannot be read. an unknown error occurred (-50)'.+
    Any ideas why this is happening? I loaded the discs in the latest itunes on another PC and it is fine. would it be that I may be using an older itunes then when i backed up the other discs and so not compatible? is that possible??
    Any help on how to get all my music back on would be great!!

    Let's get you to SP 6 for CR XI r2:
    https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
    Then I'd like you to see if you can duplicate the issue with one of our sample from here:
    https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
    vbnet_win_export.zip will probably be the best sample to use.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • The document could not be saved error when Saving to a SharePoint Document Library

    I am having an error when opening and commenting on Adobe PDF's that are stored in SharePoint 2010. When I attempt to save a PDF I have commented on I get the following error:
    The Document could not be saved. The server said:
    "The operation failed because an unexpected error occurred. (Result code: 0x80020005)"
    This seems to happen in a Document Library that is based on a custom template with Managed Metadata columns, when we remove the columns it seems to work and when we create a library with a standard document library template and manually add the manage metadata columns it also works fine.
    We would make this change to all document libraries where this issue occurs however this template is applied to 100's of libraries with thousands of documents stored in them. Is there anything we can look at to attempt to resolve this issue?
    Word, Excel, PowerPoint, etc. documents seem to work fine in these libraries.

    Hi quodd,,
    We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
    1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
    2. How are you opening and saving the PDF, the exact workflow?
         Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
    3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
    4. Please verify that columns name do not contain spaces or some other special characters.
       Can you try to save PDF to library with Custom template and just a single managed metadata column  with a simple name
    Thanks,
    Nikhil Gupta

  • "The file is damaged and could not be repaired" error when trying to open a PDF in Reader

    A few of our employess (only 3 out of over 100 so far) have been getting the error, "The file is damaged and could not be repaired" when trying to open some PDFs. Other people are able to open the same PDF files with no error. It's happening on about 10% of the time. I've read a bunch of threads here with this isue and tried some suggested fixes and nothing has resolved the issue. Here is what I have found works and does not work and the info on their computers:
    Computers:
    1 Dell Vostro desktop running WIndows 7
    1 Toshiba Satellite C55 runnign Windows 8
    1 Samsung ATIV Book 4 running Windows 8
    All using Adobe Reader XI but we did uninstall that version and tried previous versions and still got the error.
    Did Not Work:
    As suggested by the company that we use online for claims adjustments where this error is occuring, we tried using a different PDF creator since the files were created using a free PDF creator by the employees. PDF995 and PDFcreator (pdfforge) did not resolve the issue. I then created the PDFs with my Adobe Acrobat, uploaded from my computer to the online program, and that did not resolve the issue.
    Saving the file to hard drive and then opening in Adobe did not work.
    Turning off Protected Mode and Enhanced Security did not work.
    Compatibility View settings enabled in Internet Explorer 10 did not resolve the issue. The previously mentioned claims adjustment software company we use online was code for IE so is not fully compatible with other browsers.
    That being said I did try to open the PDF files in Chrome and it also did not work. Same error message.
    Does work:
    I download the file they cannot open onto my hard drive, open in Adobe Acrobat, Save as a pdf, then email it to them and they can open it via email attachment.
    If they close the error and continue trying to open the file over and over sometimes it will eventually open.
    Is there a setting in Windows that is preventing them from opening a small % of files some of the time? Thanks in advance for any help!
    James

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Maybe you are looking for