This is not right: time limit on iMac G5 Repair Program

iMac G5 Repair Extension Program for Video and Power Issues
http://docs.info.apple.com/article.html?artnum=302181
The program covers affected iMac G5 computers for up
to three years from the original date of purchase.
Apple sold iMacs G5 computers that were defective when they left the factory. Apple knows the cause of the defects. In some of the affected iMacs the defects manifested them earlier, in others later.
That Apple is using a time limit for the free repair is not right because the manifestation of the problem is usage dependant - those who used their iMac little (and the problem appears late) are being penalized. The correct way would have been to recall and repair all of the affected iMacs or put no time limit on the free repair.

Hello All,
I agree as well. My iMac G5 would not power up on Saturday morning. I bought it in Feb. 2005. I had the logic board and power supply replaced in May 2006. My apple care ran out in Feb of this year. Still, I called Apple, thinking perhaps something could be done.
The tech was very, very nice, and talked with his supervisor three times to see if perhaps I could get some kind of discount on a new computer. No go. And he explained that Apple is no longer making the old logic boards, they have to be made special, etc. I do feel a little cheated, since they replaced the logic board with one that had the same problems (opened it up--bulging capacitors with the cross mark on them). Well, it lasted two years after that, but we are not hard on our computers, and now I wish I'd have been less cautious with it. Maybe it would have died two months sooner when I still had Applecare!
Nevertheless, I still went out and bought a new iMac 24 in. 2.8 with 4 GB ram and a new Airport Extreme Base Station (Apple products are still the best I've ever used). I'm going to wait awhile to get Apple Care--to extend my coverage time as long as possible, since even a couple months would have helped in my situation.
Good luck to all you G5 owners. And thanks to all the people in the G5 forums that have been so helpful in the past. And Back-up often--you'll be glad you did.
Dawn

Similar Messages

  • Time Limit Exceeded while executing Proxy Program

    Hi all,
    we are  frequently facing Time Limit Exceeded problem in R/3 system while exceuting proxy program for large payloads (appx 5-7 MB). Sometimes we are able to successfully restart the message and sometimes we have to delete these messages. How can we resolve this issue.
    Thanks,
    Mayank

    hi Joerg,
    we are getting this error in inbound queue in R/3 system, also this is a async call, so no chance of any communication interruption b/w SAP systems. From PI system, message is succeccfully passed to R/3 system & Time Limit Exceeded is coming in R/3 system inboud queue (SMQ2). Is it poosible that timeout will happen within R/3 system.
    Thanks,
    Mayank

  • Firefox 5.0 stalls while watching videos (at least) and the only way to get it back working is to close it and restart it, and this is not right !

    I have been using Firefox 5.0 for the past few days. I have been experiencing the following error : I watch videos and suddenly, the video stops. From that point, it becomes impossible to open new tabs, especially, I tried to use the search box (with Google or Yahoo) on the top right of the page and got no result.
    However, if I close the browser and restart it, Firefox works again, until it drops again. I therefore have to close it and open it again every 5 minutes to read a video (the problem also appears when not using the video). The only thing that might cause this that is not Firefox could be my latest upgrade from Xmarks, however I disabled the thing and still got the issue.
    I would like to uninstall Firefox 5.0 from now and put Firefox 4 at least until the browser is more stable, but how do I do that ?

    Hey ppgg,
    Thanks for the question. I understand you are experiencing issues with Wi-Fi connectivity on your MacBook. The following resources may provide a solution.
    First, go ahead and utilize Wireless Diagnostics to analyze the issue:
    About Wireless Diagnostics
    http://support.apple.com/kb/HT5606
    Next, see the section titled “Symptom: The network connection drops unexpectedly” in the following article:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Thanks,
    Matt M.

  • Text put into a canvas element with context.fillText() always has a black box where each letter goes. If the text is black you just see the black rectangle. If the text is not black you see it on the black bounding box. Surely this is not right.

    This has happened on the last few versions of firefox, as long as canvas has been supported. I see other people's screen shots from canvas tutorials, and the text always looks normal. On my system, any text put into a canvas element via context.fillText() will have a black bounding box for each letter, sized appropriately for the letter. If the text is black, of course you only see rectangles. If the text is a contrasting color, then you can read it, but it looks bizarre.

    Thomas...same kind of crap here.
    I used Custom Text - entered a sentence, hit return, entered another.
    Set to 72 pt.
    The default alignment is centred - I want left aligned text...the text start point stays at the centre of frame and the sentence runs off the edge of the bounding box.
    There is no settings in the Text or Title inspector dialog to correct that!
    Using Transform will not sort it!

  • I know this is not right...

    Okay, so my charger has been getting very hot lately, that, at the connection part, where I plug it in. The casing gets very soft, and has started to lose its shape, and has cracked... And when i smell it, it smells like a faint hint of burning plastic. What should I do? Am I covered?

    No, for it to smell and get soft is definitely dodgy. If it is less than 12 months old you would be entitled to a replacement. If you are under Applecare call them and discuss your problem.
    If it is not covered by any warranty you should seek to replace it anyway.
    Be reticent using it until you get this rectified - you don't want to start a fire or damage your iBook. It is not a matter to procrastinate.

  • The adobe flash crash but i dont find anyway to send a report this is not first time

    I`m using my hot mail to send some photos and it keeps saying adobe has crash and i cant send them. when i biging again then it said cant connect w.my hot mail and i bigin reconect, again begin to upload photos and it crash again and so on, so on

    can you check this issue on Firefox 9?
    * getfirefox.com

  • Restore data from Time Machine to iMac just repaired

    My husband's iMac has just come back from having new RAM fitted.  It is essentially an empty machine.  I finally found the backup in Time Machine although it was "hidden"  Do I now use disk utility to restore the data?  I had the screen up and currently am asking it to replace Macintosh HD with iMac.sparsebundle  Is that right?

    OK so I used Migration Assistant once I knew where the old back was. Why don't all backups show when you go into Time Capsule? Wouldn't that be easier?

  • I dropped my ipod5 on a stone table (really hard) and the color (little part) came off! It's not a big problem but I just got it not long time ago. Can Apple repaire it? Will it be free? P.s. That part it's like 1mmX1mm not big, but I just want to know.

    Like I say I'm the title... A little part "colour" on my iPod5 came off after I dropped my iPod on a stone table.
    I just want to know that can Apple repair it or it doesn't count on the guarantee? It's not a big problem but I just got it few month ago...It's brand new! Do that's why I'm curious..:) and if they can repair... Will it gonna be free?

    When you get your iPod repaired / replaced... do yourself a favor, spend a few more bucks and but a case, like a Lifeproof or Griffin Survivor. Both cover the entire iPod and offer protection against drops and falls, weather, sand, dust, etc. and will at least minimize if not prevent damage to your iPod.  Good luck.

  • How to make an exception to RDS session Idle Time Limit?

    A little bit of background:
    We are running WYSE Thin Clients to connect to a RDS server farm at our company. We have set the Idle Session Time Limit to 12 hours, in Remote Desktop Session Host Configuration (in Connection --> Properties --> Sessions tab). This limit
    is a site requirement.
    The issue: We would like to configure a few accounts to stay logged into the RDS server indefinitely, past the 12 hour limit. How can we do this without changing the time limit for everyone?
    I have tried a script to simulate mouse movements/key presses at intervals on the client session to trick RDS, but Remote Desktop Service Manager does not show that the script affects the idle time for that client. Is there another automatic way to simulate
    user input to keep the client session active? What kind of hardware interrupt is RDS hooking into to determine that a human input has been pressed? A script would be the least intrusive to our infrastructure so if it is possible this is definitely preferred.
    I've heard that Group Policy may be a solution here - but our local IT department do not have admin access to the Domain Controller for our site, it is managed by a third party. However, if I were to solve this using group policy, what would be the
    steps? I would appreciate a step-by-step walk through if it is possible. We would have hundreds of users that need the 12 hour limit applied, and only a few that needs the infinite logon - so please keep practicality in mind.
    Thanks in advance to anyone who helps.

    Hi,
    Thank you for posting in Windows Server Forum.
    In your case, I would like to suggest the steps for you. Yes, you need to take this successful via group policy. 
    You can create 2 group: Just for reference: 
    Group 1- MinLoginTime  
    Group 2-MaxLoginTime
    Add the required users to particular group. 
    Users upto 12Hrs- MinLoginTime
    Users above 12 Hrs- MaxLoginTime
    Now need to apply group policy setting on this required groups. 
    Group 1- MinLoginTime: 
    Set time limit for active but idle Remote Desktop Services sessions-
    Enable -Set 12 Hrs
    End Session when time limits are reached- Enable
    This is because it will disconnect the session of your users who reached to 12 hrs.
    Group 2-MaxLoginTime: 
    Set time limit for active but idle Remote Desktop Services sessions-
    Not configured\Disable
    If you disable or do not configure this policy setting, this policy setting is not specified at the Group Policy level. By default, Remote Desktop Services allows sessions to remain active for an unlimited amount of time. 
    You can find the above setting option under below mention path.
    Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
    User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
    Note: These Group Policy settings will take precedence over the settings configured in Remote Desktop Session Host Configuration. If both the Computer Configuration and the User Configuration policy settings are configured, the Computer Configuration policy
    settings take precedence.
    More information:
    Configure Timeout and Reconnection Settings for Remote Desktop Services Sessions
    http://technet.microsoft.com/en-us/library/cc754272.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • When I make a call i cant hear anything, but the one I Call can hear me ? This happends nearly every time? What to do?

    This happends not every time but very ofrene. When it happends I Can turn ón the speakers and Then hear the one I have called. This only happends ón outgoing calls not incoming. Does anyone know about This problem ?

    See Here
    TROUBLESHOOTING iPhone Hardware
    http://support.apple.com/kb/TS2802
    http://support.apple.com/kb/TS1630

  • HT3275 For the past several days, I have been getting this message during backups: Time Machine could not complete the back up.  The backup disk image "Volumes/Data/iMac.sparsebundle" could not be accessed (error-1).

    For the past several days, I have been getting this message during backups:
    Time Machine could not complete the back up.  The backup disk image "Volumes/Data/bhoppy2's iMac.sparsebundle" could not be accessed (error-1).  When I click on the 'help' icon on the message, it reverts to a blank page, and I cannot find anything online regarding the term 'sparsebundle.'  In addition, I cannot access previous backups any longer. 
    Help?

    See C17 in Time Machine Troubleshooting by Time Machine guru Pondini:
    http://pondini.org/TM/Troubleshooting.html

  • I keep getting the message "The backup disk image "/Volumes/Donald  Baker's Time Capsul/Donald Baker's iMac.sparsebundle" could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.

    I keep getting the message "The backup disk image “/Volumes/Donald  Baker's Time Capsul/Donald Baker’s iMac.sparsebundle” could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.

    Time Capsule and Time Machine master guru Pondini has all the answers.
    Check # C17 in his excellent support document Time Machine -- Troubleshooting.
    http://Pondini.org/TM/Troubleshooting.html

  • I have a new ipad air, and the notes app does not work right.  I write a note and it will keep it for several days, or weeks and then I go back to it later and it has disappeared.  This has happened several times.  Any ideas why?

    I have a new ipad air and am having trouble with the "notes" app.  When I write a note to keep, it will stay there for a few days or a week, and then it disappears.  This has happened several times.  Can anyone suggest why this is happening and how to fix it?

    Ok. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
    Normal or safe mode still has same result. No startup, no option button and no customize.
    Thanks for your help. Got any other suggestions?

  • Not sure if this is the right place but......."noisy iMac, whats the deal?"

    Hey,
    I had recentely been having problems with my first gen iMac G5 (distorted video, noisy fans e.t.c), but after sending it in for repair ,courtesy of Apple Extention Repair Program, I am still having problems. I don't get the distorted video anymore but I am still getting the noise coming from my computer. Should this all have been taken care of when I put it in for repair or is the noise a seperate issue? Also, is there anyway I can fix this because it is driving me crazy?!?!?!
    Thanks
    Ian

    Since it was in for repair, I certainly would have mentioned it to the techs when I brought it in.
    There is no way for you to fix it, as the parts are no longer considered user serviceable.
    Since you just sent it in, I would call them and tell Apple that you are still having noise issues and see what they will do.

  • Since the os7 update on my iPad, my safari is not right, it only opens one page at a time, crashes when trying to open more, it has no back button. Help

    Since the os7 update on my iPad, my safari is not right, it only opens one page at a time, crashes when trying to open more, it has no back button. Help

    Well, I rebuilt the entire workbook... that was a few months ago and so far, the problem hasn't resurfaced. It really wasn't fun to do, but whatever glitch there was in the file, I eliminated it.
    I think I should mention that I am using Office v.X, NOT Office 2004. I got a new Intel iMac this week and yesterday when I opened up my files, it opened up the test drive (a JOKE of a program if you ask me) Anyway, some of the very minor issues I had with Office v.X were solved in the 2004 version. (When opening up large multi worksheet files without Excel being already opened, the tabs have white text) Anyway, I am still going to wait for the universal version to come out, but it seems that the newer versions may have fewer glitches (as is to be expected)
    At any rate, best of luck to you!

Maybe you are looking for

  • How do I search and work in the map module without losing my selection

    I'm going through my old photographs that predate geotracking and adding my best guess as to their locations via the  map module but I'm getting frustrated. My biggest angst is the selections.  In the library module, I look around and find a set of p

  • How do my husband and I share iTunes without sharing an apple id

    My husband and I want to share a music library, but not apps, etc on our devices.  I was told that this is possible, but everytime we try iTunes keeps confusing our ids within our apps, and now the id on the PC has been switched.  I'm so frustrated! 

  • 42 '' Panasonic pro Plasma display or FSI 17'' monitor ??

    i want to buy a second monitor for my grading suite. I already have a Sony CRT ( SD-HD ) that's still in great condition ( bought it new 3 years ago ) and i want to add a nice LCD/Plasma. Is the Panasonic 42'' professional series plasma good enough f

  • Reg: Avoid DSM Terminator popup window in the Portal 7.0

    Hello All, Iam using EP 7.0 SP19. I used Lightweight desktop for the user and assigned default home role. I am getting a popup window in the right top corner with the message as below "Closing Session". I checked that using HTTP Watch, its loading th

  • EP 6.0 AND EP 7.0

    Hi, I work on sap bw 3.5 we are about to integrate BW with EP. could anyone please let me know what knowledge of JAVA and ABAP should I have to get on my own with EP 6.0 and 7.0 pls help me with links and your kind advices. Regards, P