Time Capsule 1GB with 2 networks one of which WEP

I understand the Time Capsule supports two wifi networks. So I would like to replace my current Linksys router which I have set up with a G network secured by WEP and an N network secured by WPA.
However I cannot see how to configure the "second" network in Time Capsule - it only shows me the options for configuring one network. Also it shows no WEP option.
Can anyone tell me how to configure two Time Capsule wifi networks separately, one of them with WEP ?
Thanks!

I'm almost new to mac but i have had a lot of help in this forum to improve my knowledge so i would try to help you in this matter as a return.
But if somebody with more knowledge would help you follow his advice because as stated i'm also learning.
I have had the same impression like you about only one net available when installing my wireless net from a Time Capsule dual band new device i bought last month.
I solved it in the Time Capsuel device as follows; i acces the "manual configuration", then in the "Wireless" go to the "button" with name "advanced" in the bottom, when i push it, it open a new window with the second wireless net specifications (same name the the actual 2,4 GHZ net but with added "(5 GHZ)" and using this frecuency by default). You can try to configure it there.
I used Istumbler free program to control the range and power of each net with my portable ( quite good and free of charge).
I relize that 2,4 GHZ is less quick but arrived further so it have more range than the 5 GHZ quicker net. Now i'm able to connect to both depending of what i need each time ( more range or more speed).
I hope that this information would help you.
Best regards from Barcelona, Pascual M

Similar Messages

Time Machine and Time Capsule - Failing with Network Problem

My problems with TM/TC have been ongoing for a couple of months now and I am going round in circles - need help.
This is the second post I have made, the first got lost in people suggesting the obvious - so I will try to be a little more specific if I can.
I will detail the current state first - i.e. where I am now - after I will list what I have done so far to get to this point.
Currently, my iMac (intel) is directly connected by Ethernet 1GB to the Time Capsule. The TC is then connected to a Netgear router which in turn is connected to Internet.
I have no network problems at all - internet connection is fine. the Netgear Router has the latest firmware version and is working fine. The porblems i have are nothing to do with this.
The time Capsule is in Bridge mode and getting a reserved dhcp IP address from the Netgear router.
The Time Capsule has been fully reset - i.e. power cable out, hold the reset button, plug in power cable (spark, spark), hold reset button, fast blink for 20 seconds or so, light goes out, release button.
I have re-applied the latest Time Capsule firmware.
I have renamed the disk on the Time Capsule.
I have renamed my iMac and deleted all the time capsule entries from Keychain.
I have re-installed Mac OSX and re-updated to the latest 10.5.6 release.
At the moment I have kicked off a backup with a lot of large files - like music folder, video folder etc excluded. I also have parallels and have excluded the disk image. I have 1 other 50GB disk image which is also excluded.
I am expecting the first initial backup will complete successfully.
I will then remove music and video from exclusions and allow them to backup. I am expecting this will complete no problem. (I do this because the upcoming problem will happen if I move away from the machine - and I dont want to sit there for 2 days).
So up to this point TM and TC have performed flawlessly. The issue that follows started happening before the 10.5.6 update after backing up with no issues for months. At this point I will be able to use TM to browse the backup and restore files. I will be able to mount the sparse bundle and browse files. Spotlight reports no issues and indexes quickly.
If I leave my machine after a successful backup and the hourly update kicks in it will fail with 'A Network problem' basically saying the backup has filed because of a network problem, but is not any more specific, logs show far too much to put the whole thing here, but the following is an excerpt
Dec 23 05:19:49 MickMac /System/Library/CoreServices/backupd[1499]: Backup destination mounted at path: /Volumes/Backup
Dec 23 05:19:50 MickMac hdiejectd[1519]: running
Dec 23 05:19:51 MickMac kernel[0]: jnl: disk1s2: replay_journal: from: 28864512 to: 30084096 (joffset 0x1d0f000)
Dec 23 05:21:49 MickMac kernel[0]: jnl: disk1s2: journal replay done.
Dec 23 05:21:49 MickMac /System/Library/CoreServices/backupd[1499]: Disk image /Volumes/Backup/MickMac_001ec215ce76.sparsebundle mounted at: /Volumes/Backup of MickMac
Dec 23 05:21:49 MickMac /System/Library/CoreServices/backupd[1499]: Backing up to: /Volumes/Backup of MickMac/Backups.backupdb
Dec 23 05:21:49 MickMac com.apple.launchd[1] (com.apple.netauth.sysagent[1500]): Stray process with PGID equal to this dead job: PID 1503 PPID 1 check_afp
Dec 23 05:21:55 MickMac fseventsd[38]: event logs in /Volumes/Backup of MickMac/.fseventsd out of sync with volume. destroying old logs. (3627 125 5482)
Dec 23 05:27:33 MickMac /usr/sbin/ocspd[1539]: starting
Dec 23 05:30:27 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 5 reqID 5400 flags 0x9 afpCmd 34 so 0x7e78cc0
Dec 23 05:30:27 MickMac kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x7e78cc0
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Backup prevTrigger 0 currTrigger 1
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot -1 error 89 reqID 1 flags 0x9 afpCmd 0 so 0x7e78cc0
Dec 23 05:31:26 MickMac KernelEventAgent[34]: tid 00000000 received VQ_DEAD event (32)
Dec 23 05:31:26 MickMac KernelEventAgent[34]: tid 00000000 type 'afpfs', mounted on '/Volumes/Backup', from 'afp_0V1fqC1mgalO00mE1H0Pyetl-1.2d00000a', dead
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Open Session failed 57 /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: max reconnect time reached 60 > 30 /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: posting to KEAType IO] [ErrNo 5] [IOType Read] [PBlkNum 1248] [LBlkNum 155] [FSLogMsgID 501572642] [FSLogMsgOrder First]
Dec 23 05:31:26 MickMac kernel[0]:
Dec 23 05:31:26 MickMac fseventsd[38]: failed to unlink old log file /Volumes/Backup of MickMac/.fseventsd/0000000000ccb02b (Input/output error)
Dec 23 05:31:26 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED)."
It goes on and on and is repeated every hour. For each one I get an error message on screen saying backup failed due to a network error. However I have tried a manual download over the same period set at an extremely slow rate so that it was downloading during this time and it showed no errors. I.e. the network connection from imac, through TC to netgear and out to internet - and monitored this while time machine showed these errors (i.e. at the same time) and this showed no connection problems at all and completed succesfully.
I know TM uses an internal address to do backups, but uses the same cable and network card to get the job done. I am simply removing the cable as a source of issue although I have also replaced this making no difference.
Applecare are involved and have so far been sent 2 sets of logs and so far have not been able to find the cause. New TC is on its way to try that, although they think it is something on the imac that is causing this.
Sleep mode is turned off although screen sleep is on. The tick is not in the box for putting hard drives to sleep whenever possible.
Now, after this has happened, and back at the machine. I restart both imac and TC. Try running a backup, spotlight starts to re-index - i.e. will mount the backup volume and start the index process, gets to about 90% then fails - again excerpts from log
"Dec 23 09:18:50 MickMac /System/Library/CoreServices/backupd[161]: Backing up to: /Volumes/Backup of MickMac/Backups.backupdb
Dec 23 09:18:50 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexCI in ContentIndexOpenBulk:Unclean shutdown of /Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/li ve.0.; needs recovery
Dec 23 09:18:57 MickMac com.apple.launchd[67] (com.apple.netauth.useragent[147]): Stray process with PGID equal to this dead job: PID 152 PPID 1 check_afp
Dec 23 09:19:48 MickMac mds[32]: (Error) Server: machmsgdispatch: (ipc/send) invalid destination port [msgh_id 14016]
Dec 23 09:29:35 MickMac /usr/sbin/ocspd[197]: starting
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 11 reqID 3204 flags 0x9 afpCmd 60 so 0x8051b28
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 12 reqID 3205 flags 0x9 afpCmd 34 so 0x8051b28
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x8051b28
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Backup prevTrigger 0 currTrigger 1
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Logging in with uam 10 /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Restoring session /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot 11 error 35 reqID 3204 flags 0x19 afpCmd 60 so 0x8051b28
Dec 23 09:42:49 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot 12 error 35 reqID 3205 flags 0x19 afpCmd 34 so 0x8051b28"
And later....
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x39 (UNDEFINED).
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 received VQ_DEAD event (32)
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: hfs_clonefile: cluster_read failed - 5
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 type 'afpfs', mounted on '/Volumes/Backup', from 'afp_0V1fqC1mgalO00mE1H0Pyetl-1.2d000005', dead
Dec 23 09:45:49 MickMac kernel[0]: HFS resolvelink: can't find iNode791959
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x39 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]: ore-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431/store.db] [FSLogMsgID 1580919258] [FSLogMsgOrder Last]
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 found 1 filesystem(s) with problem(s)
Dec 23 09:45:49 MickMac kernel[0]: jnl: disk1s2: dojnlio: strategy err 0x5
Dec 23 09:45:49 MickMac kernel[0]: jnl: disk1s2: end_transaction: only wrote 0 of 49664 bytes to the journal!
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexSDB in dbcheckdatastore:store.db : dbgetdatastore: ERR: could not read 4096 bytes
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexCI in CIMetaInfoSync:write err: 5
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed /Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexSDB in adddirtychunk:/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/st ore.db : ERR: Can't write DST header (Input/output error)
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexSDB in dbflushdatastore:/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/st ore.db : dbsyncdatastore: write-errors flushing cache/writing map.
Am I the only one having these problems? any help from anybody please...

Got the same problem with a 3 months old TC.
The replacement TC, does it work now flawless?

Time Capsule compatibility with network (ethernet) printer

Does TC support connecting a network printer (all in one) via an ethernet connection?
The manual doesn't show anything on this just usb descriptions. I have Time Capsule mainly used as a router connected to my modem. 1 Imac, 2 wireless mac laptops, and 1 wireless pc using the network - no problems w/internet or file sharing etc. However, I don't see through airport utility that there is any spot to set up network printer just USB. I would like to use my Brother MFC-5840cn to network print and scan to folders. Please help solve this question if you can. Previously I did this with a linksys router. Thanks!

I still have questions about how to connect the Brother printer through ethernet. When connected does the airport utility have some area where you can identify the printer as a network printer as opposed to USB?
The AirPort Utility would only come into play if the printer was attached to the TC's USB port. Printers, attached by Ethernet, would have to "network-ready." Controlling these types of printers would be through the printer driver that you would access through the operating system interface.
In my HP example, the HP printer driver does provide access to a number of features particular to this printer model. Most manufacturers include an installation CD that provide useful utilities ... albeit most are written for Windows. I would suggest checking out the Brother support site to see if they have Mac-specific drivers or utilities.

Time capsule 2 wireless networks one without internet

Hi
i have a airport extreme and time capsule setup via ethernet to extend the network in the lounge room - i have setup a wireless network which has full internet access
my question is >> , does anyone know how to setup a second wireless network (without internet access - so it can be used for watching movies from a my cloud hdd via the my cloud app - ) so basically a second wifi network with only wifi -no internet ?
Is this possible ?
thanks

Yes, it is possible.. but you will need another wireless router to do it.
Setup the wireless router as a Static IP device running DHCP and running a different wireless name to the apple routers. You will need to swap your device that is watching the video from the airport network to the new network to watch the movie.
This could be done better with a more sophisticated router.. Apple provide no functionality beyond the most basic but lots of routers that allow you to run secondary IP and vlan will allow this without needing multiple networks.. For now though it is easier to just get a cheap wireless router.
Even an Apple router can do what you want.. just set it up as router without a WAN connection.. something like a Gen5 AE would work well and fairly cheap.

Replacing old Time Capsule Drive with New one...how?

I recently purchased a larger hard drive to be my Time Capsule drive because the current drive was getting close to capacity. Is there a way to migrate/copy/clone/move my backup history to this new drive or do I have to start from scratch. If I start from scratch then it was really no use having the other backups and I don't necessarily want two disks full of backup data. Any ideas are greatly appreciated.

Did you purchase a 1TB Time Capsule to replace your 500GB TC or did you simply purchase a larger USB HDD to connect to the previous TC?
If the former, I don't know the best way to clone from one NAS to another NAS. I don't believe Disk Utility works, so it'll need to be a third-party app that can perform that function.
If the latter, you should be able to clone the TC internal HDD to the USB HDD via AirPort Utility -> Time Capsule -> Disks -> Archive. This will erase any data on the USB HDD as well.

Weird: why would a network drive named "time-capsule-de" with an icon of an old-fashioned PC monitor appear on my home network?

Weird: why would a network drive with the name "time-capsule-de" and an icon of an old-fashioned PC monitor suddenly appear on my home network?
It happened shortly after I'd set up a new Time Capsule with our iMac and had transferred the configuration for it over from my old Time Capsule.
I'd just taken the old Time Capsule into another room and powered it up with my MacBook to confirm that Airport Utility's wiping of its settings hadn't affected the old Time Machine backups still stored in it.
I was in the process of tinkering to see how I could use the old Time Capsule, when Airport Utility offered to "extend" my home network, so I tried that setting, and then got a warning that the old Time Capsule and its wifi networks were not yet secure or private. While I was working to fix that, I noticed that in the Finder sidebar and in my Network settings, this mysterious "time-capsule-de" (with an odd old-fashioned PC monitor for an icon) had appeared. I tried to click on it, but could not access it. I also could not eject it. I shut down my old Time Capsule and my MacBook. When I turned the laptop back on, "time-capsule-de" was gone.
What do you all make of that? Should I worry about the security of my home network? I live in an apartment development, so there are more than a dozen stray wifi signals pouring in from other units.
I'd welcome any thoughts or suggestions. Thanks!

What is the name of your old Time Capsule? Did you change the name to the new one?
It appears in Finder .. that is to be expected.. it is after all a network drive.. and it has PC symbol more than likely because you are using Mavericks which defaults to SMB network.. ie the computer thinks it is a windows computer.
There is nothing bad or sinister going on.. but you certainly need to ensure your own wireless network is secure..
That is otherwise all fine.
If the TC shows up again, check that it is also in the airport utility and check its MAC address with the label on the bottom.. It will show in the Utility .. then you can compare and check you are reading the right thing.

Thinking of purchasing Time Capsule.... Can I access my documents saved on (Home Network) Time Capsule from another Network??? For instance, I can access my documents saved on MyBookLive (which is connected to my wifi) from ANY wifi connection...

Thinking of purchasing Time Capsule.... Can I access my documents saved on (Home Network) Time Capsule from another Network??? For instance, I can access my documents saved on MyBookLive (which is connected to my wifi) from ANY wifi connection... Like when I'm at school I can download documents stored on my MyBookLive at home.... I love this feature... But I would prefer to keep my products apple... So my question is can I access my documents from ANYWHERE with Time Capsule???
Other products I have: MacBook (2009 limited edition it's aluminum) two iPad2 (2012) iPhone 5 (2012) two iphone4 iPod touch (2010) iPod Nano (2011)

Remote access to TC is allowed by BTMM and iCloud service.
Not for ipad or iphone.. only the Macbook although I think people have some work arounds..
NOTE. Your school firewall should block it. If I was still working in network admin I would. ie you are risking the whole network to get access to files unchecked for viruses.. and please don't just say Macs don't get viruses, you can still be the source of the infection even if you don't suffer the disease. Just a carrier.
http://support.apple.com/kb/HT3486

Using Time Capsule to extend network

Hello: I have a Belkin N1 wireless modem router (ADSL) and have my Time Capsule connected the the modem via ethernet cable. I have the modem at the moment connected to my MacBook Pro via ethernet cable, and am able to connect to the Internet in that manner. My problem is that I cannot sem to extend my wireless network with my Time Capsule, which is what I want to do. Any advice or help? Thanks in advance.

I first tried connecting my new Time Capsule to my 2Wire gateway (DSL modem and router) via the ethernet cable to form a parallel network, but some incompatibility kept messing up the gateway's settings (resulting in losing Internet and phone altogether). I have since used the Time Capsule to extend the network via wireless only. This currently seems to work, although I have lost access to the Time Capsule on more than one occasion this afternoon for no apparent reason. I have not yet been successful in further extending the network using my Expresses -- which are used to connect ReplayTVs to the network.
Unfortunately, I cannot find a way to turn off the router function on the gateway (a previous DSL modem allowed me to do this -- most recently, I had my Extreme connected up via ethernet to the 2Wire gateway and forming a parallel network).
In case I need to replace the gateway to get this to work properly and in a stable fashion, does anyone know which AT&T DSL appropriate modems are most compatible with the Time Capsule?

Time Capsule Hangs with USB Drive Connected after installing 10.5.6 update

The 10.5.6 update basically made my External USB Disk connected to the Time Capsule unusable. I've repaired the permissions as suggested in other posts - this did not fix the problem.
I was unable to perform any incremental backups initially after the 10.5.6 update, so I archived my sparsebundle and created a new one by doing a full fresh backup - which completed successfully. However, after the backup, I was unable to connect to the Time Capsule or the USB drive connected to the Time Capsule via Finder - when trying to connect, my computer hangs and I'm forced to do a hard restart of BOTH my computer AND the Time Capsule, if I just restart one or the other the problem persists. If I let the connection attempt run long enough I get an "Error Code: -8072" message and still have to do a hard restart. After the hard restart of my computer and Time Capsule I'm able to connect to the Time Capsule and the USB drive connected to Time Capsule just fine. However, once the Time Machine backup runs again - the same problem returns, I can no longer access the Time Capsule or the USB drive connected to Time Capsule via Finder and have to do a hard restart of BOTH my computer AND Time Capsule. This 10.5.6 update has been havoc, anyone have the same troubles or ideas for resolving this? Before updating to 10.5.6 my system was working flawlessly with Time Capsule and the connected USB drive.
UPDATE: I've just verified that this problem only occurs with my external LaCie Hard Drive connected to Time Capsule via USB. If I disconnect my LaCie Hard Drive from the Time Capsule and restart the Time Capsule everything works fine (backups, access to Time Capsule Disk from Finder). If I connect the LaCie Hard Drive via USB to the Time Capsule, I am able to access the LaCie Hard Drive in Finder UNTIL the next Time Machine backup. After the first Time Machine backup with the USB drive connected, I can no longer access the USB drive from Finder - Finder hangs and eventually produces "Error Code: -8072". If I disconnect the USB drive, then plug it back in - Finder no longer hangs and I can access the drive connected to Time Capsule until the next backup occurs.
Anybody have ANY ideas? This worked fine before the 10.5.6 update!

I am having a similar problem. Never tried it before installing 10.5.6, but have a Time Capsule (500GB) with a 1TB WD MyBook Essential Edition connected via USB. Hardware is password protected by authorized users of network and needs separate login to access. When I initially set it up, it worked fine (though too difficult to set up). The WD storage drive showed up in Finder window as a subset of the Time Capsule after clicking on the Time Capsule icon. I had an "-8072" error message yesterday that I ignored, but then the file contents of the WD storage drive took forever to be viewed in Finder (though video files could be accessed wirelessly). Today started having a problem... coincidentally?... after a Time Machine backup, and got the message: "The operation could not be completed. An unexpected error occurred (error code -8072)." Now I am unable to get into the WD drive when I click on "Connect As" on the Time Capsule icon in the Finder menu... I just get the -8072 error. I no longer even see the Time Capsule disk as a subset of the Time Capsule icon in the Finder Toolbar.
What is going on???

Adding a Second Time Capsule to a Network

I have made several multi-base station networks in the past, from graphite, through snow, express, extreme and now have a Time Capsule 1TB and an Express. The Express is there simply to provide a second networked USB printer. My current issue is with NAS; I have two Buffalo LinkStations and their attached USB drives, and I tried out adding a LaCie Wireless Space (being cheaper than another LinkStation), which has been something of a disaster. It works by itself but doesn't play well with others. So I'm going to add a 2TB Time Capsule to 'join an existing network' as the setup assistant likes to put it. Two questions:
1. I assume I may use the USB port on the second Time Capsule to reconnect the printer that currently sits on the Express? This gets me one step closer to a network running on 802.11n, as the Express is an older b/g model. Only my wife's Chumby will be holding us back at that point.
2. The ethernet ports on Time Capsule #1 are full: one Brother laser MFC, and the two LinkStation NAS drives. May I expect the ethernet ports on Time Capsule #2 to function, um, transparently? If I plug in another ethernet printer or NAS will it be visible to Bonjour and the Finder respectively? I ask as I have tried using an ethernet hub plugged into a port on Time Capsule #1 and no printer plugged into the hub is seen by Bonjour.
Thanks for your thoughts,
Chris

1. I assume I may use the USB port on the second Time Capsule to reconnect the printer that currently sits on the Express?
Yes, you will be able connect a compatible printer to the USB port on the Time Capsule in either the "join" or "extend" configuration.
May I expect the ethernet ports on Time Capsule #2 to function, um, transparently?
No, if the Time Capsule is configured to "join" a wireless network because it performs no routing functions in this type of configuration. The Ethernet ports are not enabled.
Yes, if you configure the Time Capsule to "extend a wireless network". The Ethernet ports are enabled in this type of setup.
I think you will have an easier time of it if you use Manual Setup in AirPort Utility rather than the guided setup.
Everything above assumes that TC #2 is picking up the wireless signal from TC#1 and TC#1 has been configured to "Allow this network to be extended".

Time Capsule & Airport with a new modem WiFi

I have a MacBook Pro and a Time Capsule with Airport. I have a new modem from my Comcast Internet provider that has WiFi Built into it. If I use the modem for my WiFi, will my Time Capsule connect with my MacBook through the modem Wifi? And how can I know which Wifi will be the stronger?

Plug the TC into the new modem with a decent length ethernet cord.. a few meters..
Then simply setup roaming network.. so both the TC and the new modem will reinforce each other.. the setup is easy.. Bob at least says it is.. automagically from the new v6 utility.. but it is not hard to do manually either IMHO.
The basic rule is simple.
TC in bridge.
TC creates a wireless network. Same SSID.. ie wireless name Same security .. ie WPA2 AES = WPA2 Personal.. same password.
Voila there it is. although using different channels can be helpful.. if you run into problem.
Now you don't have to worry about which is stronger.. the MB will connect to whichever is stronger.. without human intervention.
Ask Bob to elaborate..
https://discussions.apple.com/thread/5146401?tstart=0
BTW the roaming network document is a help.
http://support.apple.com/kb/HT4260
The fact that you have one apple and one non-apple router here makes no difference except in terminology.

How do i use my time capsule as a network to store files, etc.?

How do i use my time capsule as a network to store files, etc.?

There is no difference in setup..
Only trouble.. be warned this is quite problematic. With Mavericks even more so.
See Q3 here.
http://pondini.org/TM/Time_Capsule.html
Take particular note. The TC is not a NAS or file server.. it can be pressed into use as one.. but will suffer..
1. Slow spin up of the disk and fast spin down. Causing streaming and library issues with itunes.
2. iphoto is easily corrupted.. don't move it to a network drive at all.
3. no backup.. the TC cannot back itself up.. it is designed as a backup target for Time Machine. but Time Machine cannot backup network drives.. and nor did apple build in a backup.. it was never needed. After all it is a backup.. not a file store.
4. you cannot partition it. You will have issues with TM if you do store both data and TM backups on it.
5. You can use USB drive plugged into the TC, and experience a new definition of pain and suffering.. well slow file transfer anyway.
Good luck.

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times.
Please help to set it up, thanks in advance

You need to give more info..
Firstly only works for what.. networking.. backup.. wireless. You need more nouns.. more adjectives... describe what you want and what fails.. then we can figure out why.
Most likely you have bridged it when it should be in router mode..
Most likely you are using Lion or ML which has the airport utility bridge the TC by default.
Change it to working as a router. That might help.
If you press reset button it will default back to router btw.
If you are on Lion.. use a real utility. http://support.apple.com/kb/DL1547

Time Machine backup to Time Capsule clobbers wireless network

Dear All,
When TimeMachine starts a backup to my new Time Capsule, the wireless network gets clobbered. Other computers on the network's throughput to external sites goes to basically zero (slow ping times, dropped packets- basically unusable.) Is this the expected behavior?
The configuration I have for my home network is
cable modem -> time capsule serving wireless network -> "g" network with 2-3 laptops (macbook pro and dell windows laptops.) The dells can't do anything when Time Machine runs, and since it runs hourly it is a bit irritating. I'm considering getting another Mac and then the downtime of my network would increase even more....
Any help would be appreciated.
Cheers
Peter

My old G5 has 802.11b, and back ups to TC are SLOW. But then the "wire speed" of g is 11M bits/s or ~1 MB/s, but in the real world if you got 100KB/s that's probably good. 100KB/s is only 6 MB/min or .36 GB/hr.
So 2GB/.36GB which is 5.6 hrs.
Or to put it another way that's about 3 GB/hr at very best.
And that's ignoring stuff like compression!
in short: not usable with 802.11g
===
On my Mac Pro with 802.11n (54 Mbs) I get about 8x that because "n" is about 5x faster wire speed and seems to have better "software".
e.g. I get about about 25 GB/hr on my ".11n" system
Still way slow but at least useable.
===
Moral of the story don't bother which TC if you don't have "n"

Time Capsule and all in one printer HP Photosmart C4280

Hello,
I recently got me a Macbook pro finally. Its awesome!! I love it. Im looking to get Time Capsule or something like that. I want to be able to hook my printer up to something and print from other room. I want to print wirelessly...the scanning and copying feature really doesnt bother me not to have.
Any know if the Time Capsule works with the HP Photosmart C4280. I got this printer with my computer. Its a multi function printer.
The backup feature is neat, but its not as important to me...Im sure it will be if I never lose my hard drive.
Anyone have any advice? Anyone have the HP Photosmart C4280 printer running on time capsule or any other wireless device in order to print wirelessly? Thanks
Amy

Hi Amy,
It should work just fine as a printer. I have a similar setup, and printing works, but I can't scan or fax across the network.
I'd probably recommend the Time Capsule over an Airport Extreme- your MBP can use it for Time Machine backups- untethered!
I've got one on order for our Mac notebooks.
Oh yeah: we have an HP Printer, too. Works fine.
If you price out 500GB and 1TB drives and wireless N routers, I think you'll see that Time Capsule is a pretty good deal.
Enjoy your new Mac!
Message was edited by: Seanessy

Time Capsule 1GB with 2 networks one of which WEP

Similar Messages

Maybe you are looking for