Time Capsule (4th Gen) Apple TV (2012) connection issues.

Hi,
I am newb when it comes to theses sort of things, but I was wondering if I could possibly get some help. I have a TC which is running pretty normal the only issue is that it's running "Double Nat" but so far that has not posed a problem. Now I have an Apple TV 2, that works fine, the only thing is that it's running at 52MB/s. By my media keeps freezing (Netflix, Hulu, etc) is there any possible solution for this?
Thanks.

Sorry, are you saying that you let the cable modem allocate IP addresses rather than the TC setting up the network?
Rules of networking.. one network one router.. you have double NAT .. that is only possible if the cable modem is also a router.. so let it allocate the IP addresses.
This is important btw.. plenty of things fail with double NAT.
Huh? Where is this option? I don't see it in the Airport Utility app.
Are you on lion.. ?? Then download and install a tool utility.. and stop playing with toys.
http://support.apple.com/kb/DL1482
In the tool utility.. go to the wireless page.
See wireless network options.. click it.
Now set the multicast rate.. multicast is your streaming video.. etc.
Depending on your firmware version it might have numbers.. 2mbps 11mbps 22mbps or something like that.. or it might show low, medium high.
Set medium or high.

Similar Messages

TS3972 How can I access the files(movies,music,etc) in my Apple Time Capsule(4th Gen) from my Apple TV(3rd Gen). This is very frustrating Apple has not provided a basic feature, and me buying the Time Capsule and Apple TV is an complete waste of bucks.

I have an Apple TV (3rd Gen) and Apple Time Capsule (4th Gen). How can I access Movies and Music stored in the Time Capsule from Apple TV. This is very n't give frustrating that Apple doesn't give their customers with an straight forward access to their customers in between their own products. Iam repenting that buying these products is completely waste of bucks. Appreciate your help...

Welcome to Apple Support Communities
The Time Capsule is clearly announced as a router with a hard drive to make backups, not to store anything and share it with your Apple TV.
To access to movies and music from the Time Capsule, note that the Apple TV can only access to them if they are stored in your iTunes library, so you will have to put your movies and music into iTunes to access to them, and then, put your iTunes library on the Time Capsule in order to access to your data from there

Time Capsule 4th Gen with 2 AE's to extend wireless has no consistent connection

I have a Time Capsule 4th Gen & 2 Airport Express (A1264) devices used for extending the wireless range - all on v7.6.4. The network setup is a u-verse modem that goes to a Cisco 8 port router, that has one ethernet line to the Time Capsule, one ethernet line goes to one of the AE's, another ethernet line to another 5 port router and an AE connected to it, and the remaining ethernet lines are to hardwire different rooms in the house.
The goal is to have the most robust wireless network I can create for the house that has, 4 iphones, 5 ipad's, 4 mac's, 2 pc's and a few other wirelesss devices. I also have an AT&T wireless Microcell (not sure if relevant). The issue revolves mostly around really poor wireless performance on iphones and iPad's they just take foreever to load pages and in many cases I need to do things like turn off wireless, forget the network, restart, airplane mode and such to get it connected. I've tried multiple configurations, and the performance is not consistent.
My understanding is that the AE's connected to ethernet on the home network can extend the TC's range and make the movement of mobile wireless devices throughout the house seemless. Is this setup doable or am I just not going to get this with the current configs.
TC setup, DHCP to u-verse gateway, Network Mode set to Create... ., WPA2 Personal, 2.4 channel 9, off bridge mode, timed access control enabled
AE1 setup, DHCP to u-verse gateway, Network Mode set to Create... ., WPA2 Personal, 2.4 channel 5, off bridge mode, timed access control enabled
AE2 setup, DHCP to u-verse gateway, Network Mode set to Create... ., WPA2 Personal, 2.4 channel 7, off bridge mode, timed access control enabled
Really appreciate any advice or tips on improving this setup. Thanks!

My understanding is that the AE's connected to ethernet on the home network can extend the TC's range and make the movement of mobile wireless devices throughout the house seemless.
This is generally true if you are using Mac laptops, but PCs and mobile devices using the iOS systems like the iPhone and iPad will not usually automatically "switch" from one wireless access point to another as the device moves from one area to another.
That's a nature of the beast of the iOS system, I am afraid.
Usually, if you move the iOS device from one area to another, you willl need to turn off the WiFi on the device, then turn it back it on. Then, it will usually pick up the stronger signal from the closest wireless access point.
Sometimes, if I move an iPhone or iPad from one area to another in a multiple access point network, the iOS device will switch over to the stronger signal after a few minutes.
I haven't installed iOS 7 yet, so can't comment on whether it might be better in this regard, but I would be surprised if it was.

Time capsule 4th gen firmware 7.6.1 and Windows 7 Home Premium

Hi I have a Time capsule 4th gen firmware 7.6.1 and Windows 7 Home Premium and every time I try to copy a large file from the TC to my Windows 7 laptop the TC crashes. The time capsule disk dissapears from the network and the wireless is still on but with limited connectivity for everyone including the macs connected to the same network. On the contrary, I can copy any files to the TC. No problem. I've tried all the suggestions. Lmcompatibilitylevel 1, disable 128-bit encryption, and disabled windows search. No luck! Any other suggestions?

My previous reply: red herring. The problem didn't occur again right away, but eventually it did. Completely repeatable: start copying a 100GB file off the Time Capsue to the ThinkPad, and the entire wi-fi network goes down; nothing to do but pull the plug on the TC and restart it.
I have tried several different versions of the Intel wi-fi driver under Windows 7 and 8 -- same problem in all cases.
At least one other thread describing these same symptoms points to the firmware as the culprit (https://discussions.apple.com/thread/3582780?start=0&tstart=0). I have just downgraded the TC firmware from 7.6.1 to 7.5.2 as suggested; so far so good.

Airport Express 1st Gen dropping Time Capsule 4th Gen when being used to extend signal

I have an older Airport Express 1st Gen and recently purchased a Time Capsule 4th Gen. The firmware for both products is updated to the latest version. When I set up the Airport Express to extend the signal for the Time Capsule, it works great at first, connects and the status light turns green. But after a while, the AE drops the "extension" and the light goes amber. I have also heard this is a problem from a Macintosh expert at the Genius Bar. Has anyone solved this problem?

Try using a wireless name that is short, no spaces and pure alphanumeric on the TC.. I would even set different names for 2.4ghz and 5ghz..
So for example.. TC24ghz and TC5ghz meet our requirement.
Use WPA2 Personal security not wpa-wpa2 as that leads to issues.
Use password that is 10-20 characters pure alphanumeric.. can be mixed upper and lower case plus numerials.
Fix the wireless channel of the TC..
Now see if it makes a stable extend..
Always remember the Express must not be so far away the signal is poor.. it should get good signal itself so it can repeat to the other clients.

Pls help my time capsule (4th gen) lost it files..I think it have a virus pls help me to fix it tnx..

Pls help my time capsule (4th gen) lost it files..I think it have a virus pls help me to fix it tnx..

1. Ethernet .. are you using ethernet?
2. Change the name of the TC to short, no spaces and pure alphanumeric.
3. In the file sharing page change the workgroup to WORKGROUP.
4. In the same area, change the guest access to on read and write.
5. If you setup homegroup on the PC get rid of it.. TC is not compatible with homegroup.
6. Turn off ipv6 in the network settings for ethernet. (since you are going to be using ethernet).
From Mac version utility it looks like this.
Go to the admin tools and ensure that bonjour for windows is on.
Manually type the IP directly into windows explorer.. do not open via MyComputer.
\\10.0.1.1
Because the error message is important.

IPod nano 4th gen - Apple Mobile Device Driver issue

I have an iPod Touch that connects and syncs perfectly with iTunes but I can't find any way of doing the same with my wife's iPod Nano(4th gen).
Whenever I connect the nano it appears under Universal Serial Bus Controllers as Apple Mobile Device USB Driver but with the dreaded Yellow Exclamation mark.
I've tried:
The 5Rs
Different cables
Different ports
Disabling drivers
Uninstalling drivers
Removing all Apple software (in the correct order) and reinstalling
The only error message I get, other than the Exclamation Mark, is when I check the Driver Properties, it shows "This device cannot start. (Code 10)".
If I click on Properties, Driver and Update Driver, Install from specific location I see:
Apple iPod USB Driver Version 6.0.9999.40 (12/11/2008) and
Apple iPod USB Driver Version 6.0.9999.61 (11/05/2012) and
USB Mass Storage Device
Does anyone have any other suggestions as to what I can try?

The code 10 might be caused by old driver componentry "stuck" in the bowels of your OS. If that's what is going on, we might be able to get past this ... but I'm afraid it's a bit of a performance.
First, go into "My Computer". Go "Tools > Folder Options". Go to the view tab.
Make sure "Show hidden files and folders" is selected.
Make sure "Hide extensions for known filetypes" is unchecked.
Make sure "Hide protected operating system files (Recommended)" is unchecked.
Click OK.
Now in "My Computer", open "Local Disk C:" or whichever drive your Operating System is installed on.
Open the "Windows" folder.
Open the "system32" folder.
Open the "DRVSTORE" folder.
In there look to see if you have either of the following two folders:
netaapl_(LongStringOfNumbers)
usbaapl_(LongStringOfNumbers)
If you find either of them, drag them out onto the desktop. (Don't touch any other files or folders you see in there.)
Now go back into the "system32" directory.
Open the "Drivers" directory.
Look for either of the following two files:
netaapl.sys
usbaapl.sys
If you see either of them in there, drag them out onto the desktop. (Again, don't touch any other files or folders you see in there.)
Now restart the PC. Try a complete uninstall/reinstall of itunes and related components as per the following document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
... and then try connecting the nano again. Any better luck this time?

HT2426 how do i access my external hard drive connected to my time capsule 4th gen

how do i acess my external hard drive (wd) that is connected to my time capsule using a macbook pro?

Make sure that the drive has been formatted correctly to work with the Time Capsule.
That means a format of Mac OS Extended (Journaled)....highly recommended.....or FAT32.
Once this is checked, open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit
Click the Disks tab at the top of the screen
If the USB port on the Time Capsule can supply enough power to the hard drive, you will see the name of the drive displayed in the window, per the example below:
If you have the correct format on the drive, and it does not appear, this is an indication that the USB port on the Time Capsule (which is under powered), does not have enough power to work with your hard drive.......even if the hard drive has its own power supply.
In this case, you will need to use a powered USB hub with the Time Capsule to provide enough current for the hard drive.
Now you should be able to access the drive using the Finder to mount it on the desktop.

Issues with Time Capsule (4th gen).. or Airport Utility?

I have som abstract issues with my Time Capsule. After some recent downtime with my ISP I thought I'd start digging around in the Time Capsules settings using the Airport Utility. Thing is though, when/if the TC shows up in the utility and I click it, it spins around at reading my settings for awhile, then I lose the connection to it entirely, it disappears from Airport Utility and I lose WiFi AND ethernet connection for a good five-or-so minutes. The unit still shows a green light.
I have a tiny bit more luck if I use Airport Utility in Windows 8.1 running through Bootcamp. I can click the Time Capsule without it "shutting down" on me and I can restart the unit through the software, but as soon as I try to change any settings or even enter my password to do so, the same thing happens.
This has happened to me in the past around 2012/2013. My first Time Capsule broke down and I had it replaced, the replacement unit did this to me as well, with the addition of WiFi not working at all so I had that replaced for a unit with the same issue... I kept this cycle replacing up and after about four or five Time Capsules I got the one I have right now which I ONCE managed to install and set up properly, but only through Windows and not OSX.
I just don't know what to do. I can't update the firmware because the airport utility can't read the settings properly as mentioned above, so I don't know if this issue is fixed through an update. Is this a common issue with the 4th gen Time Capsule? As I had it (or something like it) happen to four of the four or five units I've had I could guess it is..?
Any tips or hints, some obvious setting in OS X I could have accidentally

That is quite a story.
The Gen4 up to recently I would say was clearly the best TC they made.. finally got out most of the bugs and it ran cool enough to survive at least the 3years they should. (You cannot hope for too much more in domestic grade routers now).
But there has now come up a heap of strange issues. Mostly the units just die.. but the use of Mavericks is also causing some problems.
It is possible to do this manually even in Mavericks and even using v6 utility.. although IMHO the v5 utility is a lot better.
I hope you have already got a replacement for your TC in terms of network. Anything you do here might remove the settings that work and you will be unable to put them back.. so don't start until you can know that a bypass is possible.
Also I would like you to do this a special way. And we have a problem immediately..
MacBook Pro (Retina, 15-inch, Late 2013)
You must have ethernet. Do you have another computer with ethernet.. ?? Or can you get a friend to help with a laptop, PC or Mac that still has ethernet. Otherwise you need to buy a Thunderbolt to ethernet adapter which are not too expensive. And well worth having.
You need to factory reset the TC and do this in full network isolation.
So one ethernet LAN port of the TC to the computer. Computer has no internet connection and no wireless on.
1. Do the factory reset.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
2. Manually setup the TC by ethernet.
I have done this setup with screenshots in this thread. If you would please follow that.. anything you don't follow just ask.
https://discussions.apple.com/thread/5800974?tstart=0

Streaming video on Time Capsule 4th Gen?

I'd to store all of my video files on an external hard drive to be shared across my gigabit Ethernet. I was considering simply connecting a 2 GB external hard drive to the USB 2.0 port of a Time Capsule, but why not simply use the TC's internal SATA 2 drive instead? I think USB 2 has a maximum throughput of 480 Mbits/sec, whereas an SATA 2 has a transfer rate of 3 Gbits/sec.
Will that work?

It will stream much better from the TC internal .. that is for sure.. although internally the TC is no where near SATA 2.. indeed they still use a SATA 1 drive I think. So speed is around 50MByte/s max.. USB on the TC is extremely slow.. so good to avoid that.
Just as long as the streaming is being done by another device.. there is no media server in the TC.. it is a dumb hard disk in a router.. a file store.. it has zero smarts.

How to setup 24 hours guest network access with Time Capsule 4th gen. ?

Hello,
I just bought a Time Capsule 2TB and I cannot find the setting to limit the network access to 24 hours.
I updated the firmware and Airport Utility to the latest version and it seems that most of help on this setting I fond on internat are based on previous version.
By example I do not have a "Manual setting" in the "Base Station" menu like described in the manual.
Can someone help on this ?
Thank you and Regards,
Sebastien

Suggest that you download and install AirPort Utility 5.6 for Mac OS X Lion. It will have the settings that you are looking for.
You can keep both AirPort Utility 5.6 and 6.0 on your Mac and use the one that you need.

How can I resolve iPod Touch 4th gen charging and iTunes connection issue?

I have an iPod Touch 4th generation and the other day it stopped charging. When I pug it in, it appears to be receiving a minimal charge to keep it alive, but isn't restoring the battery life and doesn't show that the battery is accepting the charge. After plugging it in for a day, the battery was only partially charged to approximately 20%. I've tried several USB cables and different plug-ins to no avail.
Then I tried to connect it to the computer and iTunes doesn't recognize it. I've tried uninstalling and reinstalling the Apple Device Manager and iTunes software, and resetting the iPod. I've also tried holding the sleep and home buttons at the same time while connecting the iPod to the computer with iTunes software open. Nothing seems to work. I have other iPods/iPhones that connect to iTunes without issue, so it is isolated event with this iPod Touch. I was hoping to restore the iPod to its original settings to see if that would do the trick, but am unable to figure out how without iTunes. Any suggestions? help!

Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar
and/or
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Data rate slows over time: Using Time Capsule (4th) and AirPort Express (1st)

Time Capsule using Airport Express to extend network.
Over 3-4 days my data rate gradually gets slower and slower until I have to reboot both TC and AE.
Fresh reboot gets me 10Mbs or better for a while and then slows over time to 2Mbs or less.
I can cable directly to the ISP modem, taking TC and AE out of the equation, and its smokin fast
No hair left to pull out, so any help or suggestions would be appreciated.
Time Capsule (4th gen) - Model A1409
Version - 7.6.4
Wireless Mode: Create a wireless network
Wireless Security: WPA2
Channel: 149 (Automatic), 11 (Automatic)
Allow this network to be extended is checked
Radio Mode: Automatic
Multicast Rate: Low
Transmit Power: 100%
Use wide channels is checked
Guest Network is NOT enabled
Mac Address Access Control: Not Enabled
Connection Sharing: Share a public address
Using DHCP
One printer attached to Time Capsule
Airport Express (1st gen) - Model A1143
Version 7.6.4
Wireless Mode: Extend a wireless network
Wireless Security: WPA2
Channel: 11 (Automatic)
Mac Address Access Control: Not Enabled
Using DHCP

You have your wireless channels on auto.. it is usually better to control it.
You will notice I have different names for 2.4ghz and 5ghz.. then I can force the link to either band.
After you set Radio Channel selection to Manual,, click edit. You can then set the channels.
Lock the channels.. ie you take control and you set what the wireless channels will be.. when you extend wireless this works far better. The auto channel system has to run on the Extender.. but since the main base is fixed on the 2.4ghz so it will be also.. the only channel that can flap around is 5ghz (extender) since that is not under my control. Of course it is up to you to determine which channel works best.. I strongly recommend the upper channels for 2.4ghz and the lower channels for 5ghz.
So.. I have set 5ghz to 48 on the main base.. and the auto channel sets it to 149 in the extender.
One strange thing results from my setup .. (amongst many!!)
You cannot name the wireless for 5ghz in the extender.. so in my case the upstairs wireless extender has both 2.4ghz and 5ghz named TC24ghz.. nought that I can do about it. But it is not a big deal.
You can see the result in the wireless diagnostics. The last wireless I have put in the box.. it is named TC24ghz but is in fact running on 5ghz. That is just how the over automated system of the apple routers work.. If I could I would fix it.. and maybe shall via serial console at a later date.

I am using SURPLUSMETER :) I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card ,

I am using SURPLUSMETER I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card , & Adaptor .
Which one can I use properly to monitor all the wireless Devices in my hous

Actually, none of the options will do what you are looking for it to do. That is because, this application only monitors the traffic from the device it is hosted on. That would also mean that you would have to run a copy on each computer that will access the Internet on your network; note their individual usages, and then, combine them to get an idea of the total usage.
However, if you are only interested in the amount of Wi-Fi traffic that only your computer is seeing, then the "AirPort Network Card" option would be the correct choice.

I have a ipod nano 4th gen. and it wont connect to my computer at all and I tryed to reset it but its been 10 minutes and iit wont go back to normal. It is charging fine when I use the wall plug. I need help!

I have a ipod 4th gen and it wont connect to my windows computer at all. I've tryed to reset it but its been 10 min and it wont go back to normal. I use the wall plug in to charge it. also it wont charge on my computer but other wise it works fine. I need help!

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

Time Capsule (4th Gen) Apple TV (2012) connection issues.

Similar Messages

Maybe you are looking for