Time for DFQ Number to go live
Does anyone have any information on DFQ numbers?
I'm moving house and want to take my BT phone line with me to my new place. I called BT yesterday in order to set up the line rental move and they gave me a DFQ number which is used by the non-BT Broadband provider in order to make the move on their end and marry up the services.
I called BT and received the DFQ number yesterday lunchtime. I then called the Broadband provider who searched for my DFQ number but they could not find it. It is still showing as invalid more than 12 hours later.
Should I be calling BT for a new DFQ number or does anyone know what the standard time is for these to go live for other providers to pull?
Thanks in advance.
Well I did a google search and it is a sim code...simultaneous provide code
http://defragdev.com/blog/?p=619
As for timescales, somebody might be able to help on that.
toekneem
http://www.no2nuisancecalls.net
(EASBF)
Similar Messages
-
In addition to the FormsCentral subscription charge ($152.87 including tax) I was billed about the same time for $15.93. I can't find any way to get in touch with anyone from Adobe. The phone number I'm supposed to call is cut off on my invoice. Can someone respond ASAP? Thanks
I have forwarded your request to the support team that should be able to resolve this issue for you quickly. Expect to hear from them shortly.
Andrew -
I mainly just use my iTunes for organizing and adding new songs. Most of the time I listen to my music on my iPhone. I wish it would keep track of how many times I play a song in my music and transfer it to the computer under the 'number of times played' column. It would help out so much! Does anyone know if there is a way for the number of time a song has been played on your iPhone/iPod be transferred to the songs on your iTunes number of plays?
Hi @imobl,
You sound like an Apple support guy who hasn't been able to answer my questions.
To respond to some of the points you made,
- I did not ignore Ocean20's suggestion. If you has read my post, you would have known that I took my phone to the apple service centre where they tried this restore on THEIR machines. I am assuming that Apple guys know how not to block iTunes. So I actually do not understand your point about me trying the hosts file changes on my machine. Do you not believe that apple tested this issue with the correct settings?
- you also give a flawed logic of why the issue is a hardware issue. You mentioned that If I thought that the issue was with the software, i should try a restore and getting it to work. The problem is that my error (23), and many others comes up when the restore fails. And you would be astonished to know that not all errors are hardware errors. Sometimes even software errors prevent restores. Funnily enough Apple itself mention that 'in rare cases, error 23 could be hardware related'.
- all Apple has done so far is replicate the issue. I don not know how anyone can conclude that the issue is a hardware issue.
And by the way, I am not certain that this is a software bug. Again if you read my Posts, you will notice I only want a confirmation,/proof that the issue is hardware related as they mention..
Please refrain do. Responding if there is nothing to add. -
HT1911 HELP I need a phone number they charged my credit card 3 times for 1 purchase
how do I get a phone number for I tunes they charged me 3 times for one purchase PLEASE HELP !!
There is no phone support for the iTunes Store. Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
Encore suddenly askes current CC subscriber for serial number and doesn't work
I am a long time and current CC subscriber. Yesterday, Encore CS6 worked. Today, when i click to open Encore and the program prompts me to enter a serial number or "quit". There is no other option.
All my other apps are current and work: Ae, Pr, Ps, Mu, Ai, Au, ect, ect. All but Encore.....
Any CC subscriber knows that our subscription doesn't come with a serial number. So I am left wondering why my program worked yesterday and today it doedsn't work. Mind you, nothing has changed between the the time i left my computer to the time i returned. No updates, no new installs, n o t h i n g.
So I follow my first instinct to search google and bing and I find that this appears to be a common problem with no soultions short of re-writing and deleting all kinds of crazy files that honestly just look unscrupulous and only meant to really screw things up worse for the person having the problem.
So, next I follow the walkthrough at adobe's link here: http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html It didn't help me because it doesn't address the problem. All my other apps work so obviously my address, email, and payment options are up to date.
Next, I click live chat at 6:00pm pst and I am bounced from one guy to the next until at 7pm pst i get the message... "Sorry to hear that your application will not work. Please contact the more experienced tech team later as they are offline." WHAT?!?!?! No solution, just, "Your problem happend at an inconvenient time for adobe so come back later." And no mention of when that time will be. THAT is NOT CUSTOMER Service. This so not cool, moral, or right in any universe. Just leave me hanging. I can not put in to words how upset I am right now. Adobe has really let me down.
When my clients have problems, I deal with it right then and there and I don't leave until it's fixed and done. I may jump ship on this one.Richard, I tried "run as administrator" to no avail. However, I was able to get in touch with a adobe tech today. After getting passed to about 3 or 4 different techs, one was finally able to assist me.
The tech had me open Pre Pro CC and go to "help" and click "sign-out". When you do that a pop-up appears saying that: signing out will deactivate the following software on this computer unless you sign in again; following with the icon for each Adobe CC app i have installed.
Next the tech had me open Pre Pro CS6, which upon opening askes you to sign in which I did. Once Pre Pro CS6 was open, The tech had me check under "help" to see if the the option "deactivate" was available or greyed out. For me, It was greyed out.
Next the tech had me close Pre Pro CS6 and open it again and check "help" to see if deactivate was still greyed out; and it was still greyed out.
Next the tech had me close Pre Pro CS6 and open Pre Pro CC which prompts you to sign in. After Pre Pro CC launched the tech had me close it and open Pre Pro CS6 again too check under the "help" tab again and confirm if "deactivate" was still greyed out or black (executable). This time "deactivate" was black.
Next the tech had me launch Encore CS6 tto see if it still required a serial number. This time Ecore opened as it should, without requiring a serial number.
Hopefully this stick, or Adobe includes a perminant solution in the next update.
I Hope this helps others with this same issue.
Thank you again Adobe for helping me! -
What is a best practice for counting number of payments in Payroll Run?
I'm trying to get a feel for what people are using as a means for counting number of payments being created during a payroll run. I would like to get a total number of checks, direct deposits, wires and zero net checks. My initial thought is to use the Pre-DME number "Selected and Evaluated Persons". This number seems to always match the number of persons "Selected" and "Evaluated" in posting to FI/CO.
Since many companies are restricting use of SE16 and access to many of the BT tables is locked down, I would like to use something that the end user has access to and can easily use. I don't believe the spools from RFFOUS_C and T are appropriate since it would have overflow pages (2 page REM Statements) in that number and thus would not be an accurate reflection of total number of payments.
I would appreciate your insight and thoughts on this topic.
Thanks!Hello Jennie,
This is what we do every payroll:
1. After running live payroll and before exiting our users run wage type reporter /559 to get the payroll net pay. They also run Postings to FICO simulation run to check payroll net pay GL account. This match all the time. So this is the first pass.
2. They finish all subsequent activities in PRD run upto RFFOUS_T.
3. We have developed a custom report which almost looks like REGUH which gives the net pay details by every payment method and amount to be deposited or paid. We match this report from the output we received from step 1.
4. Run postings to FICO live and check the payroll net pay GL account for final validation.
The steps might sound tedious but of a great use.
Arti -
Bex Reports takes long time for filtering
Hi,
We have gone live in last December.And already our inventory cube contains some 15 million records,sales cube contains 12 million records.
Is there any specific limit to number of records.Because while doing filtering in inventory report or sales reports it is taking very long time.
Is there any alternative or we should delete some the data from the cube.
for filtering any value it is taking long time than running the query itself.
Pls help...
Regards,
viren.Hi Viren,
I hope a cube can perform well even at 100 million records with some performance tunning. So i absolutely doubt why it is taking long time for your cube with just 10-15 million records.
Do a performance analysis and check whether aggregates will be helpful or not.
Check the below link for how to do a performance analysis.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/d9fd84ad-0701-0010-d9a5-ba726caa585d
Hope it helps.
Thx,
Soumya -
Launch time for Creative Cloud will be TODAY at 8:00 PM PDT
The statement above... has been provided via an on-line response to an Adobe representative.
Hopefully, the servers will stand strong for the influx in upgrading to all CC members! Fingers crossed!MY SOURCE!
Your Adobe ID:[email protected]
Your Case Number:0184406648
Case Description:Chat:release info (CH79977930)
The new version of of creative cloud is not yet released yet. The launch time for Creative Cloud will be on Monday 6/17 8:00 PM PD T. Please wait till that time and then you are able to download the software through the Creative Cloud webpage.
If you have any issues with Adobe software, please do contact us back.
We are available Monday to Friday 1am PST to 8 pm PST for Live chat
I'd like to clarify, I am no way connected to Adobe in an official capacity, I am a user of the Creative Cloud services and am awaiting with just as much anticipation as you all. I simply contacted support this morning (UK) and recieved the responce above via an on-line chat with an Adobe representative. Adobe then sent the confirmation of the communication to my email inbox. -
Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)?
Exemple:
Table1
Cliente name:
John
Client number:
12345
Survay number of negative answers:
3
Table2
Questions and answers that were negative:
Question: How much time where you waiting
Avaluation: 3 (from 1 to 10)
Answer: They only called me 1 mouth later
Can you please help me?Hi,
Based on the description, I understand that you want to add subreport in the main report. When previewing the main report, the subreport can be shown in detail. Please see the screenshots on my test:
In Reporting Services, we can create parameters and pass them from main report to subreport in order to control the data dynamically.
References:
Subreports (Report Builder and SSRS)
Add a Subreport and Parameters (Report Builder and SSRS)
If I have any misunderstanding, please feel free to contact me.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support -
Generic extractor FM : taking 5-6 hours time for 3 months to BW urgent:
Dear experts,
I have designed a FM for generic extraction , which is taking 5-6 hoours time for 3 months data i.e 24 lakhs records to BW up to PSA .
i have given the coding below plz provide any modifications to improve the performance.....
FUNCTION zhr_att_analysis.
""Local Interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*" I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE ZHR_ATT_MAIN OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
Auxiliary Selection criteria structure
DATA: l_s_select TYPE sbiwa_s_select.
Maximum number of lines for DB table
STATICS: l_maxsize TYPE sbiwa_s_interface-maxsize.
Select ranges
RANGES: l_r_pernr FOR pa9004-pernr,
l_r_bukrs FOR pa0001-bukrs,
l_r_persg FOR pa0001-persg,
l_r_begda FOR pa9004-begda,
l_r_persk FOR pa0001-persk.
Maximum number of lines for DB table
STATICS: s_s_if TYPE srsc_s_if_simple,
counter
s_counter_datapakid LIKE sy-tabix,
cursor
s_cursor TYPE cursor.
*"Declaration of store data
TYPES : BEGIN OF ty_9004,
pernr TYPE persno,
endda TYPE endda,
begda TYPE begda,
zrs TYPE zrs,
zstorecode TYPE zstorecode,
END OF ty_9004.
*"Declaration of employee data
TYPES : BEGIN OF ty_0001,
pernr TYPE pernr_d,
endda TYPE endda,
begda TYPE begda,
AEDTM TYPE AEDAT,
bukrs TYPE bukrs,
persg TYPE persg,
persk TYPE persk,
END OF ty_0001.
*"Declaration of expected mandays
TYPES : BEGIN OF ty_0000,
pernr TYPE persno,
endda TYPE endda,
begda TYPE begda,
aedtm TYPE aedat,
stat2 TYPE stat2,
massn TYPE massn,
END OF ty_0000.
*"Declaration of man days swiped
TYPES : BEGIN OF ty_teven,
pernr TYPE pernr_d,
ldate TYPE ldate,
satza TYPE retyp,
aedtm TYPE aedat,
counter_swiped TYPE i,
END OF ty_teven.
*"Declaration of Man days regularized
TYPES : BEGIN OF ty_2002,
pernr TYPE pernr_d,
subty TYPE subty,
endda TYPE endda,
begda TYPE begda,
aedtm TYPE aedat,
END OF ty_2002.
*"Declaration of Man days lostdue to leave
TYPES : BEGIN OF ty_2001,
pernr TYPE pernr_d,
subty TYPE subty,
endda TYPE endda,
begda TYPE begda,
aedtm TYPE aedat,
END OF ty_2001.
*****Declaration of weekly off
TYPES : BEGIN OF ty_2003,
pernr TYPE pernr_d,
subty TYPE subty,
endda TYPE endda,
begda TYPE begda,
aedtm TYPE aedat,
tprog TYPE tprog,
END OF ty_2003.
Auxiliary Selection criteria structure
DATA :
it_0001 TYPE TABLE OF ty_0001,
wa_0001 TYPE ty_0001,
it_0000 TYPE TABLE OF ty_0000,
wa_0000 TYPE ty_0000,
it_teven TYPE TABLE OF ty_teven,
wa_teven TYPE ty_teven,
it_2002 TYPE TABLE OF ty_2002 ,
wa_2002 TYPE ty_2002,
it_2001 TYPE TABLE OF ty_2001,
wa_2001 TYPE ty_2001,
it_2003 TYPE TABLE OF ty_2003,
wa_2003 TYPE ty_2003,
wa_target TYPE zhr_att_main.
DATA : date TYPE dats,
doj TYPE dats,
dol TYPE dats,
date1 TYPE dats,
date2 TYPE dats,
counter(9) TYPE n.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
buffer input parameters
prepare data selection
Check DataSource validity
CASE i_dsource.
WHEN 'ZHR_ATT_ANALYSIS'.
WHEN OTHERS.
IF 1 = 2. MESSAGE e009(r3). ENDIF.
log_write 'E' "message type
'R3' "message class
'009' "message number
i_dsource "message variable 1
' '. "message variable 2
RAISE error_passed_to_mess_handler.
ENDCASE.
APPEND LINES OF i_t_select TO s_s_if-t_select.
Fill parameter buffer for data extraction calls
s_s_if-requnr = i_requnr.
s_s_if-dsource = i_dsource.
s_s_if-maxsize = i_maxsize.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
APPEND LINES OF i_t_fields TO s_s_if-t_fields.
ELSE. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
IF s_counter_datapakid = 0.
LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'PERNR'.
MOVE-CORRESPONDING l_s_select TO l_r_pernr.
APPEND l_r_pernr.
ENDLOOP.
LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'BUKRS'.
MOVE-CORRESPONDING l_s_select TO l_r_bukrs.
APPEND l_r_bukrs.
ENDLOOP.
LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'PERSG'.
MOVE-CORRESPONDING l_s_select TO l_r_persg.
APPEND l_r_persg.
ENDLOOP.
LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'BEGDA'.
MOVE-CORRESPONDING l_s_select TO l_r_begda.
APPEND l_r_begda.
ENDLOOP.
LOOP AT s_s_if-t_select INTO l_s_select WHERE fieldnm = 'PERSK'.
MOVE-CORRESPONDING l_s_select TO l_r_persk.
APPEND l_r_persk.
ENDLOOP.
OPEN CURSOR WITH HOLD s_cursor FOR
populate only store code employess does not have empty store codes
SELECT apernr bpernr bendda bbegda bbukrs bpersg b~persk FROM pa9004 AS a INNER JOIN pa0001 AS b
ON apernr = bpernr
WHERE a~pernr IN l_r_pernr AND
a~zstorecode <> '' AND
bukrs IN l_r_bukrs AND
persg IN l_r_persg AND
persk IN l_r_persk.
ENDIF.
Fetch records into interface table.
named E_T_'Name of extract structure'.
FETCH NEXT CURSOR s_cursor
APPENDING CORRESPONDING FIELDS
OF TABLE it_0001
PACKAGE SIZE s_s_if-maxsize.
IF sy-subrc <> 0.
CLOSE CURSOR s_cursor.
RAISE no_more_data.
ELSE.
break-point.
IF l_r_begda-high = '00000000' AND l_r_begda-low = '00000000'.
date1 = sy-datum - 1.
date2 = sy-datum - 1.
ELSE.
date1 = l_r_begda-low .
date2 = l_r_begda-high.
ENDIF.
SORT it_0001 BY pernr persg begda endda bukrs.
DELETE it_0001 WHERE persg NE 'T' AND
persg NE 'K' AND
persg NE 'P' AND
persg NE 'W'.
DELETE ADJACENT DUPLICATES FROM it_0001 COMPARING pernr begda endda bukrs.
populate all the employees that are active in pa9004.
IF NOT it_0001[] IS INITIAL.
SELECT pernr endda begda aedtm massn FROM pa0000
INTO CORRESPONDING FIELDS OF TABLE it_0000
FOR ALL ENTRIES IN it_0001
WHERE pernr = it_0001-pernr
AND ( massn = 'A1' OR massn = '00' OR massn = 'A6' OR massn = 'A3' ).
SORT it_0000 BY pernr begda DESCENDING.
ENDIF.
populate SWIPED MAN DAYS data
IF NOT it_0001[] IS INITIAL.
SELECT pernr ldate satza aedtm FROM teven
INTO CORRESPONDING FIELDS OF TABLE it_teven
FOR ALL ENTRIES IN it_0001
WHERE pernr = it_0001-pernr AND
satza = 'P01'
AND ldate IN l_r_begda.
SORT it_teven BY pernr ldate.
ENDIF.
**populate REGULARIZATION DAYS data
IF NOT it_0001[] IS INITIAL.
SELECT pernr subty endda begda aedtm FROM pa2002
INTO CORRESPONDING FIELDS OF TABLE it_2002
FOR ALL ENTRIES IN it_0001
WHERE pernr = it_0001-pernr
AND begda >= date1
AND endda <= date2 .
SORT it_2002 BY pernr begda endda.
ENDIF.
**populate LEAVE DAYS data
IF NOT it_0001[] IS INITIAL.
SELECT pernr subty endda begda aedtm FROM pa2001
INTO CORRESPONDING FIELDS OF TABLE it_2001
FOR ALL ENTRIES IN it_0001
WHERE pernr = it_0001-pernr
AND begda >= date1
AND endda <= date2 .
SORT it_2001 BY pernr begda endda .
ENDIF.
**populate WEEKLY OFF data
IF NOT it_0001[] IS INITIAL.
SELECT pernr subty endda begda aedtm tprog FROM pa2003
INTO CORRESPONDING FIELDS OF TABLE it_2003
FOR ALL ENTRIES IN it_0001
WHERE pernr = it_0001-pernr AND
tprog = 'OFF'
AND begda >= date1
AND endda <= date2 .
SORT it_2003 BY pernr begda endda.
ENDIF.
date = sy-datum.
********added changes on 06.04.2008**************action type & date dependent extaction****
loop over it_0001 table
BREAK-POINT.
LOOP AT it_0001 INTO wa_0001.
if sy-tabix = 1.
counter = 0.
for expected mandays
LOOP AT it_0000 INTO wa_0000 WHERE pernr = wa_0001-pernr .
IF wa_0000-massn = 'A1' OR wa_0000-massn = '00' OR wa_0000-massn = 'A3'.
doj = wa_0000-begda.
if wa_0000-endda = '99991231'.
date2 = sy-datum.
else.
dol = date2.
endif.
ELSEIF wa_0000-massn = 'A6'.
dol = wa_0000-begda.
ENDIF.
ENDLOOP.
IF date1 <= wa_0001-begda AND date2 <= wa_0001-endda AND date2 >= wa_0001-begda AND date1 <= wa_0001-endda.
counter = date2 - wa_0001-begda .
counter = counter + 1.
date = wa_0001-begda - 1.
ELSEIF date1 >= wa_0001-begda AND date2 >= wa_0001-endda AND date2 >= wa_0001-begda AND date1 <= wa_0001-endda.
counter = wa_0001-endda - date1.
counter = counter + 1.
date = date1 - 1.
ELSEIF date1 >= wa_0001-begda AND date2 <= wa_0001-endda AND date2 >= wa_0001-begda AND date1 <= wa_0001-endda.
counter = date2 - date1.
counter = counter + 1.
date = date1 - 1.
ELSEIF date1 <= wa_0001-begda AND date2 >= wa_0001-endda AND date2 >= wa_0001-begda AND date1 <= wa_0001-endda.
counter = wa_0001-endda - wa_0001-begda.
counter = counter + 1.
date = wa_0001-begda - 1.
ELSE.
CONTINUE.
ENDIF.
********completed changes on 06.04.2008**************action type & date dependent extaction**
split records from date of joining to till date
DO counter TIMES.
CLEAR : wa_teven , wa_target.
date = date + 1.
wa_target-date1 = date.
wa_target-pernr = wa_0001-pernr.
wa_target-bukrs = wa_0001-bukrs.
wa_target-persg = wa_0001-persg.
wa_target-persk = wa_0001-persk.
for expected mandays count
IF wa_target-date1 >= doj AND wa_target-date1 <= dol.
wa_target-expectedmandays = 1.
wa_target-aedtm = wa_0000-aedtm.
for swiped mandays
READ TABLE it_teven INTO wa_teven WITH KEY pernr = wa_target-pernr
ldate = wa_target-date1 BINARY SEARCH.
IF sy-subrc = 0.
wa_target-swiped_days = 1.
wa_target-aedtm = wa_teven-aedtm.
ENDIF.
for regularized days
LOOP AT it_2002 INTO wa_2002 WHERE pernr = wa_target-pernr
AND ( endda GE wa_target-date1 AND begda LE wa_target-date1 ).
wa_target-reg_days = 1.
wa_target-subty2 = wa_2002-subty.
wa_target-aedtm = wa_2002-aedtm.
ENDLOOP.
for leave days
LOOP AT it_2001 INTO wa_2001 WHERE pernr = wa_target-pernr
AND ( endda GE wa_target-date1 AND begda LE wa_target-date1 ).
wa_target-leave_days = 1.
wa_target-subty1 = wa_2001-subty.
wa_target-aedtm = wa_2001-aedtm.
ENDLOOP.
for weekly off days
LOOP AT it_2003 INTO wa_2003 WHERE pernr = wa_target-pernr
AND ( endda GE wa_target-date1 AND begda LE wa_target-date1 ).
wa_target-off_days = 1.
wa_target-aedtm = wa_2003-aedtm.
ENDLOOP.
append work area to e_t_data
APPEND wa_target TO e_t_data.
ENDIF.
ENDDO.
ENDLOOP.
clear internal tables
CLEAR : it_0000 , it_0001 , it_2001 , it_2002 , it_2003 , it_teven.
ENDIF.
s_counter_datapakid = s_counter_datapakid + 1.
ENDIF. "Initialization mode or data extraction ?
ENDFUNCTION.Hi Guys
I can have both your cases looked into for you.
Please send me an email using the contact us form in my profile. The address for this form in the section 'about me'.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
Background job is taking lot of time for processing the job.
One background job - which is processing Idocs is processing a job for more than 2000+ seconds.. and completed tho.
But this is happening for the past few days.. is there any way to trouble shoot, or find from any logs of this completed job, to find out why it was taking lot of time for processing.
Can you please tell me the steps of analyzing / trouble shooting why it was taking lot of time daily.
Regards,
Satish.Hi Satish,
Run DB stat from db13 it will improve the performance.
Check number of idocs. You can send part by part, instead of sending huge data.
Check SM58 logs
Suman -
Saving to SharePoint works only half the time for Windows 7 Users--all the time for Windows XP users
We have a SharePoint 2010 Environment with hardware load balancing, 2 WFEs, 2 Apps Servers and 1 SQL Server. This was built in October 2013. Office Integration and Saving back to SharePoint works all of the time for users on XP. It works sporadically for
users on Windows 7. When Windows 7 users do the following:
Opening an Office Document from computer and saving it to SharePoint
Within a Document Library, using Save As from an opened document
When selecting in a Document Library from the Document Tab> “New” and then the desired content type
Send> Save to SharePoint from within Office Document
They may either be brought to the SharePoint library (correct) or to My Documents (incorrect).
In the case of number 1 (Opening an Office Document from computer and saving it to SharePoint)--using Save and Send will sometimes open the SharePoint library and sometimes open My Documents.
Our URL is https://CompanyName.domainname.com/Sites/SiteCollectionName
The intermediary "Sites" is actually a blank path.
When My Documents is opened I've noted with Fiddler (a web debugger) that we get a 404 on sites:
Could this be the issue?Some things to double check:
Ensure that you have sticky sessions enabled on your load balancer
Check that your WebDav calls are making it to the server
Ensure that you have a root site collection in all your web apps
Just out of curiosity, what is the http request look like for the 404 error?
Chris Givens CEO, Architecting Connected Systems
Blog Twitter -
Re: Running the same (Forte) application multiple times -for different
Hi
We had the same problem - how to deploy a number of identical applications, using each their own db.
(for training).
The solution we used is to wrap the entire application into different applications by using a very small
module called KURSUS01, KURSUS02 etc, that did nothing but call the start procedure of the main app.
Then in the dbsession connect, we made a call appname to get the application name, and appended the
first 8 chars to the dbname. Thus our dbnames now points to logicals name: rdbdataKURSUS01, rdbdataKURSUS02 etc.
All this allows us to deploy the identical apps in the same env, or change one version, and run both the old
and new program on the same pc and server at the same time (eg. KURSUS01 and KURSUS02).
I also think this is a kludge - but it works nicely!
Jens Chr
KAD/Denmark
-----Original Message-----
From: Haben, Dirk <[email protected]>
To: 'Soapbox Forte Users' <[email protected]>
Date: 15. januar 1999 09:41
Subject: Running the same (Forte) application multiple times - for different business clients.
Hi All
We have a number of different business clients all willing to use our
application.
The (forte) application is to run on our machines etc for these (business)
clients.
All (business) clients will have their data kept in separate Oracle DBs
(instance).
The problem now is that the entire (forte) application is written using
DBSessions.
Now, depending on what business client needs to be serviced (so to speak) we
need to attach to the right DB - or use the "right" SO.
The two options we can think of are:
Option1:
Programatic change to somehow "know" what (business) client (DB) I'm talking
about and then use the right DB.
Pro:
Only one forte environment to maintain
Can run multiple (business) clients on same PC at the same time
Con:
Requires many program changes
bending O-O rules(?)
can't dynamically name SOs so can it be done at all? (ResourceMGRs maybe?)
Option2:
Use separate environments! One for each business client.
Pro:
More defined separation of app and data,
SLA-easy
Con:
Maintain "n" number of environments
Can only run the application for one environment (business client) at a time
on one PC - Big Negative here!
Not knowing any feasible solution to option 1 (without much code changes and
developer moaning) I would go for option two; as I have already worked on
multi-environment setups on VMS back at the Hydro (hi guys).
I would appreciate any comments from anyone who has solved this problem.
How, Why Pro Con etc.
TIA,
Dirk Haben
Perth, WA
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hi
We had the same problem - how to deploy a number of identical applications, using each their own db.
(for training).
The solution we used is to wrap the entire application into different applications by using a very small
module called KURSUS01, KURSUS02 etc, that did nothing but call the start procedure of the main app.
Then in the dbsession connect, we made a call appname to get the application name, and appended the
first 8 chars to the dbname. Thus our dbnames now points to logicals name: rdbdataKURSUS01, rdbdataKURSUS02 etc.
All this allows us to deploy the identical apps in the same env, or change one version, and run both the old
and new program on the same pc and server at the same time (eg. KURSUS01 and KURSUS02).
I also think this is a kludge - but it works nicely!
Jens Chr
KAD/Denmark
-----Original Message-----
From: Haben, Dirk <[email protected]>
To: 'Soapbox Forte Users' <[email protected]>
Date: 15. januar 1999 09:41
Subject: Running the same (Forte) application multiple times - for different business clients.
Hi All
We have a number of different business clients all willing to use our
application.
The (forte) application is to run on our machines etc for these (business)
clients.
All (business) clients will have their data kept in separate Oracle DBs
(instance).
The problem now is that the entire (forte) application is written using
DBSessions.
Now, depending on what business client needs to be serviced (so to speak) we
need to attach to the right DB - or use the "right" SO.
The two options we can think of are:
Option1:
Programatic change to somehow "know" what (business) client (DB) I'm talking
about and then use the right DB.
Pro:
Only one forte environment to maintain
Can run multiple (business) clients on same PC at the same time
Con:
Requires many program changes
bending O-O rules(?)
can't dynamically name SOs so can it be done at all? (ResourceMGRs maybe?)
Option2:
Use separate environments! One for each business client.
Pro:
More defined separation of app and data,
SLA-easy
Con:
Maintain "n" number of environments
Can only run the application for one environment (business client) at a time
on one PC - Big Negative here!
Not knowing any feasible solution to option 1 (without much code changes and
developer moaning) I would go for option two; as I have already worked on
multi-environment setups on VMS back at the Hydro (hi guys).
I would appreciate any comments from anyone who has solved this problem.
How, Why Pro Con etc.
TIA,
Dirk Haben
Perth, WA
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
When creating a comment summary, I want to end up with a pdf of comments only. In addition, I do not want author, date, time, or page number to show in my comments summary. How can I do this? I do a lot of reading, and when I summarize my comments, I like to save these comments in a larger document I compile over time. I typically create a comment summary, export it to a text editor and find myself having to delete author, date, time, page number, and anything else that is not the raw and net comment. It would save me some good time if someone showed me how to do this. The reason I do not want any additional information is because it simply adds stuff I do not need in my compilation of summaries for large amounts of papers over time.
What you're describing can't be achieved using the built-in comments summary function of Acrobat, but it can certainly be done if a custom-made script it used to generate the summary because then you're in full control of what's included in it and what's not.
-
SAP customer number unknown for installation number
Hi There,
We're facing some problems after a reconfiguration of some things in Solution Manager. We have SAP EHP 1 for SAP Solution Manager 7.0. Have made two days ago the installation of the latest SP, but not the kernel yet.
The problem is in the job SEND_SYSTEM_RELATIONSHIP_TO_SUPP. The error is:
08.01.2010 10:43:24 Job started 00 516 S
08.01.2010 10:43:24 Step 001 started (program AI_SC_SEND_SYSTEM_RELATIONSHIP, variant , user ID SOLMAN_BTC) 00 550 S
08.01.2010 10:43:24 SOL determined as monitoring Solution Manager system AI_SC_EN 075 S
08.01.2010 10:43:24 SAP customer number unknown for installation number 00XXXXXXXX AI_SC_EN 097 E
08.01.2010 10:43:24 Job cancelled after system exception ERROR_MESSAGE 00 564 A
The info about the system:
solman:soladm 21> disp+work
disp+work information
kernel release 701
kernel make variant 701_REL
compiled on HP-UX B.11.23 U ia64
compiled for 64 BIT
compilation mode UNICODE
compile time Feb 24 2009 21:53:01
update level 0
patch number 32
source id 0.032
supported environment
database (SAP, table SVERS) 700
701
operating system
HP-UX B.11
Thanks,
JoaoHi João Cesar,
I´m faccing with the same error... I installed the solution manager Ehp1 and it have SPS20 applied which correspond to ST 400 level 20 (SAPKITL430).
When I am in transaction SMSY in section Systems and I press the button "READ SYSTEM NUMBER" is shown an error message that says "SAP customer number unknown for installation" the details of help says:
Diagnosis
Installation number &V1& that is assigned to some system(s) in transaction SMSY is not assigned to an SAP customer number in table AIINSTALLATIONS.
Procedure
Please check the log of background job REFRESH_ADMIN_DATA_FROM_SUPPORT for errors.
So, when I entry in that job log I found this error:
No customer numbers maintained in view V_AISAPCUSTNOS | AI_SC_EN | 106
Then I went in table/view V_AISAPCUSTNOS and inside does not contain any data!!!
All the notes I found were related to lower versions and so I could not implemented the snotes corrections!! Any notes for my release that are related with this problem?
Joao Cesar what you did for solve this problem??? You didn´t mentioned!! You only mentioned that you implemented some notes.. but which ones?!!?
Maybe you are looking for
-
Scripts will not show up in menu
Hello I just recently started using Photoshop CS5. In the past versions you would be able to drop a java script in the Adobe/Presets/Scripts folder and the next time you launched photoshop the script would then be listed under File > Scripts. It now
-
Making payment in Automatic Payment Transaction (tcode:F110).
Hi. all. May I know which part of standard coding or standard program which make the payment proposal inside the Automatic Payment Transaction (tcode:F110). I found out that SAPF110V, SAPF110S and some are related. But i don't know which is the accur
-
Revision: 2153 Author: [email protected] Date: 2008-06-19 18:34:42 -0700 (Thu, 19 Jun 2008) Log Message: build.xml: Adding a description to the 'asc-tests' task to match the other *-tests tasks. Modified Paths: flex/sdk/trunk/build.xml
-
Did the iPad Photo Album interface (where there is a black background and you can pinch to expand albums) come from the Mac OS? I think I've been seeing that interface before the iPad came out but I cannot do it on my MacBook Pro. Can you help me cle
-
Somehow when I plugged my I phone into my sons Macbook i synched all of his info to my phone. Now his contacts and pics are on my phone and mine are lost. Any way I can get mine back?