Time management entry error
Hi Sap guru,
I am facing error in time management, can any one help me out,
I maintained paid absence type of sickness/illness in 2001 infotype, and I went for time evaluation, where it evaluated successfully, then I went for payroll process, during processing it is throwing an error of u201CNo entry in table T554C for key 10 02 00u201D
The error breaks down as follows:
Molga: 10 u2013 USA
Absence valuation grouping 02
Valuation rule: 00
But my valuation rule suppose to be 04
I had checked the table of T554C, T554S Via V_554S_G, T555y and also the pcr rule TMOD, where all the configuration is correct.
So can any one help me out of how to resolve this issue.
With Regards,
Sheryasen
Hi Shreya,
Since your absence valuation group is 02, please see that MODIF A=02 is maintanined in the pcr XMOD or not.
If not, copy XMOD to custom defined and maintain the correct groupings. It will resolve your issue.
regards,
shyam
Similar Messages
-
ESS Time Sheet Entry Error - "critical error, data has been lost"
I tried saving his time sheet data on the ESS . I noticed that when I went back to check on the draft, Draft has no longer exists or had any information. When I tried to find the draft, I got the message "critical error, data has been lost"
Can any one help on this issue if faced.Hello,,
Are you able to enter time on the backend via Cat2, for example?
Please provide further details for the community to assist you.
Details like:
- Which ERP version are you running?
- Do I have any dumps or logs on ST22 and SLG1?
Thank you. -
Dubious EFI boot manager entries
Hi all,
After attempting to install Fedora on my computer via Boot Camp I ended up with 4 "windows" volumes in the boot manager, all of which give me the "missing operating system" error. I'm not sure how or why, but I imagine somewhere along the line boot camp added all these entries that pointed to incorrect or nonexistent volumes. I used to have Ubuntu installed in the same place as Fedora but had to install it a number of times before I succeeded. Perhaps that has something to do with the problem.
My question is, is there a way to safely edit the boot manager entries (boot.efi?), or, if not, is there a way short of re-installing OSX that I can reset it somehow?
-poddusHi,
What you are seeing might be a result of the number of UEFI enabled devices (all sources) on your PC. Windows 7 in not a UEFI system.
On my PC, the residual Windows Boot Manager entries from previously installed UEFI enabled devices can be eliminated by resetting the BIOS entries to the defaults.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
UNABLE TO GET SALARY BASED ON HOURS ( POSITVE TIME MANAGMENT )
Hi Vivek,
Your document was great.
I am implementing positive time management and at present i am entering the clock in and clock-out in IT-2011 manually for testing and when i run PT60 using TM00 schema it was not showing any errors but data in 'ZL' it was showing as no entries.
And to cross check i have executed 'PC00_M40_CALC' but the payroll was caluclated based on no. of days( negative tm).
I am new to TM concept please help me out.
Thanks,
Saikrishna.Hi,
Here are some answers/comments to your question above.
1. You should not make any changes in schema TM00 (Standard SAP Schema) - copy this to a custom schema (ZM00) in transaction PE01 and add logic/make changes in this custom schema.
2. Entries will not automatically be created in the ZL table just because you have IT2011 (Table TEVEN) entries. ZL entries are created either through PCR logic, or via table T510S (Wage type generation) entries. These are both very complex Time Management concepts that require a lot of studying and understanding in order to take raw data and generate the appropriate wage types at the appropriate time. This is important because based upon raw clock in and clock out's alone the system does not know if it should generate regular hours, overtime, double time, holiday pay etc - you have to do the configuration to tell the system what to generate and when to generate it.
3. As far as your issue within the payroll driver (Basic Salary being created on the basis of number of date) - I believe this could be based upon either wage type setup or your Pay Scale configuration and this associate's Infotype 8. You probably have him setup like a salaried associate. Check the following area in the IMG Personnel Management --> Personnel Administration --> Payroll Data --> Basic Pay
Good luck on your journey to learning SAP Time Management/SAP Payroll.
Thanks,
Imran -
"Time Management" top urgent pls respond
HI All,
I have configured payroll with time Absence but time management status is 7
the payroll is giving this error, can any one help me out.
00000503 Payroll Sanjay
Wage type generation requested for period: 200601
Fr.: 01.04.2006 To : 30.04.2006
04.04.2006 Tuesday
IF GWT Not if full-day absence without WT
Processing
No entry in table $ for key $ 554C 400111 20060
Technical error no. 72
04.04.2006 Processing terminated for EE 00000503 Payroll Sanjay
I have checked this 554C and added a technical wage type
still it is not working,
Please let me know what I have to do
Thanks
VeerHi Veeresh I dont think the table T554C is for any technical wagetypes.
This is the view maintained for absence valuation in PAyroll.For instance this is used to prorate ur salary as per the number of loss of pay days.
U have to maintain
AbsValGrpg Valuation rule StartDate EndDate
01 11 01.01.1999 31.12.9999
Hope this helps U removing the error.
Award Points if Helpful -
Error while approving time sheet "Internal Error Occurred"
1) Time Sheet entry done for an employee b/w 3rd-5th Oct 2011, while approving it through T code - CATS_APPR_LITE, its giving the error " INTERNAL ERROR OCCURRED" !!!
When the error is expanded, the below details have come up.
Internal error occurred
Message no. LR030
Diagnosis
The system has detected an internal program error which should not have occurred in a normal program run.
Procedure
To safeguard your data, notify the SAP hotline.
2) Please let us know, is there any other procedure or way to approve the time sheets ???
Reg,
Hrishi - 9945607822Note 1315885 - CATS: Internal Error(LR030), in transaction CATS_APPR_LITE
Refer and apply the mentioned note if applicable.
Regards
Sreenivas -
sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.
Hi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Flow of Time Management Configuration.
Hello Guys,
Please explain me the flow of SAP Time Management during the configuration. It will help everyone to understand the process step by step
Thanks & RegardsSteps for IT0007
Define Public Holiday Classes
Personnel Subarea Groupings
Daily Work Schedules
Period Work Schedules
Work Schedule Rules and Work Schedules
Steps for IT2001 and 2006
Group Personnel Subareas for Attendances and Absences
Define Absence Types
Determine Entry Screens and Time Constraint Classes
Define Counting Classes for the Period Work Schedule
Group Employee Subgroups for Time Quotas
Group Personnel Subareas for Time Quotas
Define Counting Rules
Define Absence Quota Types
Permit Generation of Quotas in Time Evaluation
Specify Rule Groups for Quota Type Selection
Set Base Entitlements
Determine Validity and Deduction Periods
Define Rules for Rounding Quota Entitlements
Define Generation Rules for Quota Type Selection
Define Deduction Rules for Absence and Attendance Quotas
Assign Deduction Rules to Counting Rules
Best Regards -
DBM - Time Management - CATS Transfer to CO
Hello DBM Gurus,
we are trying to set up Time Management in our DBM implementation (6.04).
the DBM transactions work and create timestamps in CATS as expected but, we seem to have a problem with the integration between CATS an CO. The entries in cats do not create CO transactions in the internal order of DBM order (no entries created in table CATSCO).
We have followed all the instructions we could find. this is still not enough.
Are there any specific steps rellevant to this problem (transfer from CATS to CO) that we might have missed?
Do you know any Cookbook or helpful help on this issue?
thanks in advance,
Daniel GamssYou can refer this link for details process of interface data from HR and CO,PS,MM ...
[http://www.****************/showthread.php?t=11938]
Normally after book in timesheet from CAT2 ->Data will be save in CATSDB table,
after approves data will exist in CATSCO , CATSPS, CATSMM and then we use CAT5 to interface data from HR to PS, CAT7 to interface frm HR to CO ...
For you case no data exist in CATSCO ->check data already approves or not -
HR toolbox payroll/Time management step by step
Hi Experts,
Can you please tell me the PU12 Payroll/Time management step by step process?.
Thanks.The SAPADPFR process model is designed to launch a payroll and export payroll data to SAP using the Interface with external payroll systems (pu12) transaction. The system creates a process corresponding to the process model for each of the payroll services in the Services menu. In the scenario, ADP-GSI indicates whether the service must use the process model or not. You can copy the SAPADPFR standard process model and adapt it to your companyu2019s requirements.
To launch the SAPADPFR process model, the name of the process model must be entered in the PM_PAIE constant (SAPADDFR by default). Program RPPM0FI creates a link between the different programs run in the process model and the process itself.
The sequence of programs defined in this process model is as follows:
○ OT_SELECT_PERNR_OTFR initializes the process model. The user selects the personnel numbers for the payroll areas pre-selected in a dialog box. The status of the payroll areas considered on Released for payroll is updated in the HRPAYFR_ADP_PERNUM BAdl implemented by ADP-GSI.
○ RPCALCF0 launches the payroll for each employee selected.
○ RPIF00FI creates an export file based on the options defined in pu12 for the FADP interface format.
○ RPPMFLFI calls program RPFL00FI with the file formatting data based on the options defined in pu12.
○ RPTMSEFI converts the file to ZADIG format.
○ RPSENDFI sends the data file to ADP.
The value of the TEM_DVR code affects the following steps:
○ RPDOWNFI extracts the reference values.
○ RPSENDFI sends the reference values.
○ RPPMCDFI deletes the reference values file and indicates the end of the process.
A breakpoint is planned after each program that does not use the PNP logical database:
1. to manage return codes as they appear in a ADP scenario: a return code less than or equal to 50 stops the process
2. to call the HRFR_PROCESS_STOP_OT_SAPOTFR function module
A conditional breakpoint is planned for management codes. Depending on these codes, it is possible to skip these steps. These breakpoints call the HRFR_PROCESS_NAVIG_OT_SAPOTFR function module.
In the SAPADPFR process model, in the event of an error the process stops on the step following the conditional breakpoint. The function module called allows you to ascertain whether the previous step (STOP_OTFR) was carried out correctly.
A procedure for purging processes is integrated into the FINPER service after the process is closed.
It is possible to view the result of the process and the updated status of the ADP exchange in the exchange table (T5F6K). Program RPDV90FI creates a link between the completed process and the ADP transmission table. You can view this information in the process log for this program. -
Time Management Status Default
Hi All - Prior to employees being onboarded we enter an 'Initial Hire' action that creates a few infotypes for them including IT0007 (Planned Working Time). The business wants the Time Management Status to default on IT0007. However, we can't default it in TMSTA because they are set up with the same PA/PSA/EG/ESG as they are during their 'Completed Hire' action. We are attempting to default this in dynamic actions but have been unsuccessful (see below). Does anyone have any suggestions?
0000 6 423 P PSPAR-MASSN='ZA'
0000 6 425 W P0007-ZTERF= '0'Hi,
You need the insert statement too. Try this:
0000 6 423 P PSPAR-MASSN='ZA'
0000 6 425 I INS,0007,,,(P0000-BEGDA),(P0000-ENDDA)
0000 6 427 W P0007-ZTERF= '0'
Feature TMSTA information:
It uses structure PME01 and that only contains action reason (MASSG), so you could build your decision tree based on action reason. You may want to have a unique reason code tied only to your ZA action. Iu2019d imagine you would only have one reason code for this initial entry action as it is only for a temporary use.
Alternatively, you can change the structure of feature TMSTA from PME01 to PME04. You would then have action (MASSN) and action reason (MASSG) available for building the feature.
Hope this helps.
Donnie -
Hi
I have SharePoint 2013 farm and installed Workflow Manager 1.0 and configured it and have been runing fine for several months. I upgraded this farm to SP 1 and then started having some issue with publish WF 2013 with task in SPD.
I re-Registered using Register-SPWorkflowService command and that fixed the problem and WorkFlow Manager running again OK. It has been couple of monthle and now I am having the problem again but with a different error on SPD
So doing what I did before, I tried to re-Registered WFM but this time getting the error below
Register-SPWorkflowService : The data or messaging layer is unavailable. Please retry
after 300 seconds.
The only possible resolution that I found is to add the -AllowOAuthHttp in my Register-SPWorkflowService cmdlet but that didnot not resolve the problem. I tried that anyway eventhough we do not allow http.
I did some checking for status and configuration and Get-SBFarmstatus showing all WFM services are running OK
I browsed to the WFM server https://servername:12290 and get the same error
- <Errorxmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>UnexpectedError</Code>
<Message>The data or messaging layer is unavailable. Please retry after 300
seconds.</Message>
</Error>
If anyone have advise / suggestion to resolve this issue, please share
Thanks in advance for all comments
SwanlHi Swanl,
Please refer to the article below for troubleshooting actions for workflow manager:
http://blogs.msdn.com/b/vincent_runge/archive/2014/01/07/troubleshooting-actions-for-sharepoint-2013-workflows.aspx
Moreover, activate workflow manager logs and see if there is any error message that could be help.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
ORA-19511: Error received from media manager layer, error text:
Dear Concern,
When I am restoring the oracle 9i database by brtools for SAP ECC 5.0 the following error message appeared. Mention that, this is second time restoration. First time restoration was successfull. After that one of us change some permission in differerent folders and files in the hp-ux server. Now we facing the following problem. Please help me...
BR0449I Restore mode: ALL
BR0419I Files will be restored from backup: bechtawc.fnr 2010-01-08 20.00.06
BR0416I 100 files found to restore, total size 520901.781 MB
BR0424I Files will not be decompressed
BR0421I Restore device type: rman_util
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.21
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRRESTORE:
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0554I Starting restore from full database backup using RMAN...
BR0278E Command output of 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog':
Recovery Manager: Release 9.2.0.1.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
RMAN> connect target /;
connected to target database: PRD (DBID=1654880374)
using target database controlfile instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6> 7> 8>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on sbt_1 channel at 01/19/2010 16:19:24
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
HP-UX Error: 8324: Unknown system error
Additional information: 7110
ORA-19511: Error received from media manager layer, error text:
SBT error = 7110, errno = 8324, sbtinit: internal error - invalid argument(s)
RMAN>
Recovery Manager complete.
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0279E Return code from 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog': 1
BR0536E RMAN call for database instance PRD failed
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0556E Restore from full database backup using RMAN failed
Best Regards
WahidHi,
It is mentioned that I already have done a restoration and recovery first time. But when I tried to do the same job I mean restoration in second time for a specific requiremnt I am getting the above error.
Our syestem info is:
DB: Oracle 9i
OS: HP-UX
Storage: EMC storage
Backup tools: Data protector 5.5
Please help me.
Regards
Wahid -
PNPCE with Time Management Urgent!!!
Hi,
I got a Project using PNPCE LDB on Time Management.They didn't mention Unicode any where in the Specs.
But, when I was trying to do a simple test program with PNPCE LDB mentioned in attributes and I didn't even check Unicode but it is giving this syntax Error.
" The program is not Unicode-compatible, according to its program attributes. "
Though I avoided this I coulldn't execute the Program.
Can anyone please help me.How to proceed with this.
Thank You,
SwapnaHi Chander,
You can read 0027 similar to how you read 0002 concatenation in PNPCE.
Since, your original question was anwsered completely by Uwe, pl mark this thread as closed by clicking on the radiobuttons to the left.
~Suresh -
Hi,
We would like to reverse the time card entried created by our employees in the previous period. These time cards are for billable employees and they were assigned to the wrong expenditure org. We cannot ask all the employees to reverse them as they can be errors while reversing them manually. Are there any apis available to reverse the time cards ? Quick Suggestions are much appreciated.
SivaEach period is closed for posting after certain date.
In CATS profile settings, if u tick "Take account of period lock", you would not be able to chnge/add for a period which is already closed in costing.
You can change the posting date in the transfer program RCATSTCO(transfer to controlling) manually.
Maybe you are looking for
-
It should be possible to close a thread without saying it's answered.
It should be possible to close a thread without saying it's answered. Maybe closed - resolved or closed - not resolved. Edited by: Mike Angelastro on Jan 29, 2010 6:43 AM
-
Hi I need to transfer alerts from RWB to CCMS. I user the MTE class SXI_RWBAlertCateg. In my development environment everything work fine, the ccms monitor displays the list of categories and the related alerts. In production the ccms monitor display
-
Set Partner Field in Sales Doc as Mandatory
Hi SD gurus, Is there a way to set the a particular Partner type as mandatory in a sales document? In our sales order we identify the Sales Employee related to this sale. However there are times when users forget to select/identify them because it is
-
Issues in creating Sales Document Type
I am creating a new Sales Document Type, but the problem is this that the "Probability" & "Incompl. Proced" fields are disabled and I am unable to enter record in this field , please help me out that how can I enter values in these fields.
-
Is there anyway of a contents page being automaticly created. I have 59 pages do i need to type them all on to a contents page and link them myself. Thanks