Time out! validating App to App Store
Anybody else experience the same problem?
/Markus
I thought it was my app hanging up. Maybe not. Any idea as to when it will be available?
Similar Messages
-
WebLogic 10.3.6 Times Out When Starting Web App
When starting our web app on WebLogic 10.3.6 using startWebLogic.sh on OEL (8 cores, 64 GB box), after about 5 to 6 minutes we receive a timeout error from WebLogic saying that it timed out trying to start the web app. The web app has some pre-computed indices to load which will take an estimated 10 to 15 minutes to load. Is there are way to control this timeout?
The time-out you are getting is that related to a transaction?
You can set the transaction time-out in the WebLogic console go to the JTA page for the domain, and change the value in the Timeout Seconds field.
When you are using EJBs, you can also set the time-out on a EJB basis, instead of configuring the time-out for the whole domain.
For example, in weblogic-ejb-jar.xml, you can configure the time-out by using:
<weblogic-ejb-jar ...>
<weblogic-enterprise-bean>
<ejb-name>YOUR_EJB_NAME</ejb-name>
<enable-call-by-reference>True</enable-call-by-reference>
<stateless-session-descriptor>
<pool>
<initial-beans-in-free-pool>25</initial-beans-in-free-pool>
<max-beans-in-free-pool>50</max-beans-in-free-pool>
</pool>
</stateless-session-descriptor>
<transaction-descriptor>
<trans-timeout-seconds>600</trans-timeout-seconds>
</transaction-descriptor>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>The transactions this EJB spawns can last for 10 minutes. -
Network connection time out when connecting to Itunes store
When I try to connect to Itunes store i get this message:
"Itunes could not connect to iTuens sore network connection has times out Make sure your network connection is active and your network setting are correct"
Can some one walk me through or link me to a site or discussion so i can get this fixedI had the same problem several days with the AppStore. Software-downloads did not proceed, i tryed everything, shut down firewalls, change the host-file, disable proxy-server - no success.
I have Kaspersky-Suite as firewall and anti-virus-software.
Accidentially I find a solution:
- select in iTunes at downloads "Proceed" of a download-entry . iTunes then connect with the server, so it is enough time to:
- right-click on the windows-tray-symbol of Kaspersky and select "stop service" (something like that, i work with the german version).
Now, surprise, the download proceed and starts working again. In case the download is freezing again:
- Reactivea Kaspersky-service with right-click as described above, then deactive the serve again as i described.
Seems this "Workaround" opens a door to an network-connection Kaspersky usually block by itself.
Shutdown the firewall and finishing the Firewall-Software is a good idea, but you never know, which process is running in the background despite you shutdown everything possible...
Hope the "solution" is working for you! -
Connection times out when I open iTunes store
When I open iTunes store, I receive an error saying "iTunes could not connect to the iTunes store. The network connection timed out. Make sure your network setting are correct and your network connection is active, then try again."
What is a good resolution?I am having the same problem. Here is my diagnostic thing.
Microsoft Windows Vista Home Premium Edition Service Pack 1 (Build 6001)
Acer Aspire 7520
iTunes 8.1.1.10
QuickTime 7.6
FairPlay 1.3.6
iPod Updater Library 8.1d19
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.4.1.7
Apple Mobile Device Driver 1.40.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number 45DD7A951E4414CC
Current user is an administrator.
The current local date and time is 2009-04-20 14:08:58.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 7000M / nForce 610M
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {4A66390C-37F1-4179-AF6D-56BE200D52CB}
Description: NVIDIA nForce Networking Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {41FB20F8-6F81-4A34-AD16-072C92EB2748}
Description: Atheros AR5007EG Wireless Network Adapter
IP Address: 192.168.1.102
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Mon Apr 20 13:38:57 2009
Lease Expires: Tue Apr 21 13:38:57 2009
DNS Servers: 66.76.227.40
66.76.227.40
208.180.42.68
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iPhone activation server unsuccessful.
The network connection timed out.
Last successful store access was 2009-04-17 12:40:14.
I have unchecked the server certificate revocation also. -
SMTP very slow/errors and times out in mail.app
I have a series of account set up that are working great except for my work mail (exchange IMAP). The server it's on is pretty slow, and this is complicated in mail app as I get constant SMTP send errors "the server rejected the address...." it's very intermittent - I can have an hour where everything sends just fine, and others where it just doesn't work. Connection doctor takes at least 10 seconds to successfully connect.
Is there a way to adjust the time out value on mail.app so that it doesn't immediately fail to send?Let us separate between the intermittent SMTP errors and the slowing down for the time being. What happens (and how long it takes) when you open a shell and connect to the SMTP server ? For example, try something like this:
]# telnet smtp.google.com 25 (if your smtp server is imap google)
try to send a simple message and see how long it takes, e.g.
helo smtp.google.com
-- -
Trying to purchase LR CC, entered payment options, then page times out
this is the page that times out.
http://shop.adobe.com/store/adbehap/en_SG/buy/ProductID.298013300/ThemeID.31893000/Currenc y.SGD/clearcart.yes
tried various browsers already. clueless...For additional help, reach us at http://helpx.adobe.com/contact.html
General Info
Chat start time
Apr 26, 2015 7:51:52 PM PST
Chat end time
Apr 26, 2015 8:25:47 PM PST
Duration (actual chatting time)
00:33:54
Operator
Jaymani
Chat Transcript
info: Thank you for your patience.
While you wait, you can try our community forums where experts are available 24 hours a day, 7 days a week.
info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
info: You are now chatting with Jaymani.
Jaymani: Hello! Welcome to Adobe Customer Service.
Jaymani: Hello Timo
Jaymani: I understand that you are unable to place order for Lightroom.
Jaymani: I will be glad to help you with this.
Timo Predoehl: hi, so how to purchase?
Jaymani: Just to confirm, are you trying to purchase Lightroom as Single app?
Timo Predoehl: I selected the basic LR CC option for SGD 156/year for 1 user
Jaymani: Please allow me 2-3 minutes while I check the information for you.
Timo Predoehl: thanks. after I clicked proceed, I got to this page (http://shop.adobe.com/store/adbehap/en_SG/buy/ProductID.298013300/ThemeID.31893000/Currenc y.SGD/clearcart.yes) which times out without further notice
Timo Predoehl: error message: Server does not respond
Jaymani: Let me inform you that LIghtroom does come as single application, it comes with Photoshop as bundle with S$1300/mo.
Jaymani: LIghtroom does come as single application, it comes with Photoshop as bundle with S$1300/mo as Creative Cloud.
Jaymani: If you want to purchase Lightroom as single you can place order as stand alone product.
Timo Predoehl: I am not sure what you are talking about. I am referring to your offer on https://creative.adobe.com/plans?store_code=sg
Timo Predoehl: single user license is SGD13/mo or SGD156/year
Jaymani: Thank you for confirming.
Timo Predoehl: so, how to purchase then?
Jaymani: In that page after selecting the plan please select annual plan, pai monthly or annual plan, prepaid and click on Buy now.
Jaymani: Then sign in with your Adobe Id and password to place the order.
Jaymani: Please let me know if you are getting the same error?
Timo Predoehl: Your file 'Bildschirmfoto 2015-04-27 um 11.15.09.png' was successfully uploaded.
Timo Predoehl: yes. http://shop.adobe.com/store/adbehap/en_SG/buy/ProductID.298013300/ThemeID.31893000/Currenc y.SGD/clearcart.yes just times out
Timo Predoehl: Your file 'Bildschirmfoto 2015-04-27 um 11.16.29.png' was successfully uploaded.
Timo Predoehl: cannot open page - server not responding
Jaymani: Please give me a minute to check this.
Jaymani: In this case I will provide you Phone support contact. They will help help you to place your order.
Jaymani: Singapore: 800 448 1642
Jaymani: Please call on this number to get help for placing order.
Timo Predoehl: thanks. -
Opening an application from other application causes time out - urgent...
Hi All,
I have a wierd issue using weblogic server 9.2 mp2.
Here is the breif overview of the environment and issue.
Environment: WLS - 9.2 mp2
In this weblogic server i have two Managed servers.
Managed Server 1 : MS1
Managed Server 2 : MS2
Two Applications deployed on the server.
myapp1 on MS1 URL: http://myappserver:7309/myapp1
myapp2 on MS2 URL: http://myappserver:7310/myapp2
Now here is the issue.
I launch myapp2 from myapp1 using javascript window.open()
In this configuration when i launch myapp2 from myapp1, myapp1 times out.
Now when i deploy both app on same managed server (say MS1) and launch myapp2 from myapp1, myapp1 does not time out.
I deployed myapp1 on my local machine and launched myapp2 and it works fine. It times out only when both apps are on same weblogic server but different Managed server.
any pointers would be greatly helpful.
Regards,
BHi James,
Are you sure the ports are correct in the javascript link when the apps are deployed to different managed servers?
Yes i made sure the port number is currect.
Have you tried using absolute URL's instead of relative links?
Yes i am putting the absolute URL.
When you say the timeout occurs, where are you observing this timeout, in the browser or something in the server logs?
I can see the time out in the browser. I checked the server log but it does not say anything.
Hope it clears the air.
Regards,
B -
How to set per user session time out.
Hi folks,
I am trying to set longer session time out to selective users with the following line, but it turns out setting this time out for the whole app. Is there a way to change the session time out per user only?
request.getSession(true).setMaxInactiveInterval(172800);
BillyWell, there's the rub. If you want more control over session handling, you have to take the good with the bad. My suggestion is to use a good open source caching solution and let the cache evict entries for you. You should be able to specify both an interval over which data goes stale and/or the maximum size you want the cache to reach. Really, a session is just a specialized form of caching anyway.
http://java-source.net/open-source/cache-solutions
- Saish -
Session time out in a web application
Hi,
I am making a struts based web application. For session time out validation I have made an entry in the web.xml file as <session-config>
<session-timeout>1</session-timeout>
</session-config>
In case the user's session time out occurs then he should be directed back to the log in page.
Can any one tell me how to proceed in this case and what are the best practices.
thanksHi
I've tested it with OC4J and it works both ways.
I do think that you must have the
<session-config> tag present though for the setMax... method to
work, observe that this method is for seconds and not millisecond
regards
//Mike
Hi all,
I try to manage by my application the http session time-out.
Change it in a web.xml works fine , but if in my servlet i try
to change it using setMaxInactiveInterval(MILLISECOND) the result
is that the session became invalidate after few seconds instead
50 minutes ad example ....
Answer ????
thks
Carlo Mossa -
I just got a (lightly) used Mac Mini as a second computer (2010 model). Logged into Mac App Store with my Apple ID and tried to check for updates...received "An error has occurred - The request timed out" message. Was able to go to the main App Store page and download/install OS X Mountain Lion...then tried again and still got the time-out error. Any ideas of what is happening and how to get Software Update to work?
Apps already installed by the former owner of the Mini are associated with that persons Apple iD. You won't be able to update any of those apps using your Apple iD. Those apps will have to be purchased from your Apple ID only.
Apparently the previous owner had not upgraded to Mountain Lion as yet, or you would not have been able to download and install that OS X. -
I pod tuch 5th gen has a good wifi signal but times out on app store and many other apps
I received a new ipod tuch 5th gen for christmas, started using it a few days ago and noticed dspite the fact it has a good wifi connection, it keeps timing out especially with the app store but many apps as well.If I try to install an app, I have to try sometimes 10 times or more just to get the download going.I'd appreciate any suggestion can't
Popular Tags: Below is a list of frequently used tags in this community.I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
i had to restore my iPad mini and when I go to the App Store to reload some of my apps it times out and doesnt reload them. Any suggestions?
Close the App Store app and reset your iPad.
Now close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
In order to reset your iPad, hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears on the screen after which time you can release the buttons and let the iPad start up.
IF that didn't help, try turning WiFi off on your iPad in the Settings, restart the iPad, then turn Wifi on again. -
I've had my iPad (retina display) since last year. Over the last few weeks the App Store struggles to load on occasion and times out completely. When searches do rarely complete, the App Store closes down and returns my iPad to the home screen and, when I open the App Store again, it has just reset the store, forcing it to load all over again. I've tried closing all running background applications, with no difference being made. Any help would be greatly appreciated.
1. Double-click the Home button to reveal Task Bar
2. Hold the App Store app down for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Re-launch the app and test
Note: If necessary close all apps in the Task Bar -
Mountain Lion downloaded from App store on 11th and 12th June will not install. Downloaded TWICE it times out after 20 secs into install. Can't get any help!!! Going around in circles!!
My Machine MacBook Pro OS 10.6.8
Processor 2.66Ghz i7,
4GB memory
128GB solid state drive
Purchased 2010Thanks very much for the advice. I trawled through the other answers on the site and it appears others had the same issue. I doubled the available space and the install went like clockwork... which is what one would norma;ly expect from Apple :-)
Maybe Apple should have a ' definitely read me first' notice before a download takes place with CLEAR instructions to have more than the 6GB they indicate ofr the Mountain Lion download -
MY app store on mountain lion times out
Hi,
My app store times out anytime i try and load the update page. The entire rest of my app store works just fine. I can buy apps, download apps, whatever else I need to do in the app store, but at soon as I click on the update tab, the app store just spins, before eventually timing out.Lets do a test. Create a new User Account, and try to access the MAS from there.
OS X Mountain Lion: Create a new user account
http://support.apple.com/kb/PH11468 -
I keep getting session time out whenever I try to purchase apps on iPhone 5. It keeps asking me to verify my credit card security number and then when I click DONE, it tells me session time out. Anyone can help?
Having problem with internet connectivity on WIFI - anything that depends on DNS for data whether it is a web browser or an app while using WIFI. I call this problem "WIFI Lockout".
This happens on iphone 4, ipad 2 and ipad 3 that has been updated to iOS 6.
I am not talking about the issue of the missing apple page (day 1) or the inability to turn on/configure WIFI after updating to iOS 6.
This is what i have discovered so far.
You could be in the middle of surfing or using any app that makes data calls based on DNS (when you type google.com that is translated in the background so your device knows where to go - summary only) and suddenly you can go no where or do nothing!
Sometimes conectivity goes trouble free for long periods, other times it is repetitive "WIFI Lockout".
Yea sure, you can restart the WIFI connection, but WHO wants to CONTINUALLY do that?
Interestingly enought the device is still successfully connected to the internet via WIFI, but DNS request fail to pass successfully from the iOS 6 device.
Apple (or any curious iOS 6 user that wants to see my point), when this happens "WIFI Lockout" open up a browser before you reset the WIFI connection and type type 74.125.227.144 (google) and then “go” (I tried both safari and chrome). A google search page will come up and you will be able to execute a search (of course any link you click on will not work as it is dependant on DNS resolution).
The above IP connection to google proves NON DNS traffic works, so the issue is not the WIFI connection to the access point that is the problem. It is not an access point configuration/firmware or security protocol issue either because data does pass when the above steps are followed.
I KNOW THIS IS NOT ALL OF THE PROBLEMS WITH iOS 6, BUT THIS IS A HUGE PROBLEM NOT BEING ABLE TO SURF OR GET DATA THE iOS 6 DEVICE IS REQUESTING WHILE ON WIFI.
Maybe you are looking for
-
Hi to you all, I have built a table which retrieves data from a .jsp file by making an http request. The particular request is made every 10 seconds. The data is read in lines and the lines are stored in a vector. i.e. the line is: 1 34 er ty 23 wher
-
is their a limit for dowloading a free application for apple store because am getting a not valid password and user id
-
Function module or BAPI for Project and Partner in PS
Hi, Can anyone tell me is there any function module or BAPI that link with Project/WBS and Partner. Thanks in advance, Krishna
-
Can't covert PDF to word Doc?
Hello ive tried a PDF and it is working. But this on PDF will not convert just keep getting an error everytime
-
hi, wondering if someone can help me, i have some script in which the object name will be created from a string and now i need to call another object within the object and not sure how to do it.. here is some code: u will see on the first line of the