Timer option in report server

Hi All
is there any option in report server that when a report till not run in 1 minute or any specific time time then the sesion expires or report server time out.how can we manually set this option to our desired time period.
thanks

HI,
I'm not sure whether you mean that, but there is a reportserver conf file in [ORACLE_HOME]/reports/conf where you can define the following parameters of the certain server that may help you:
maxIdle
The number of minutes of allowable idle time
before the engine is shut down, provided the
current number of engines is higher than
minEngine.
callbackTimeOut
The number of milliseconds of allowable waiting
time between when the server calls an engine and
the engine calls the server back.
Hope it helps,
regards,
Heike

Similar Messages

Average Response Times for a Reports Server

On Application Server Control and Grid Control are sections listing the Average Response Time in milliseconds.
Can anyone tell me what response it is measuring exactly?
Thanks
Andy

See the Online Help for the page for a description of the metric. In Help, you can search for "metric" to see definitions of the other metrics.

Oracle Reports Server CGI - Report Job was cancelled upon user request.

I am running reports on the web through Forms using Run_Report_Object built in. I am using Oracle 9iAS Enterprise Edition Release 1(1.2.2.2.2), Forms 6i Patch 9 (6.0.8.18.3) and Reports 6i Patch 9 (6.0.8.18) using CGI implementation. Most reports are running fine, but I have one that produces 125 pages and we are getting the following messages in the browser:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job was cancelled upon user request.
However if you look at the Reports Server Queue Status thru the browser it shows that the report did finish, but it took 16 minutes. But the user gets the above message in their browser window.
Is there a way to get the first page of the report to display, while the rest of the report finishes, so the browser window doesn't timeout and display the above error?
Any help would be greatly appreciated.

hi ,
There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
Hope this helps
Manoj

.Forms [32 Bit] Version 10.1.2.0.2 (Production) report server.

hi
i have a question about Forms [32 Bit] Version 10.1.2.0.2 (Production) so many users are facing the problem in report server and even i faced the problem,
i started the report server and tried to display the report but it was giving me errors sometimes
REP-41213 unable to connect to report server and sometimes
REP-51002: Bind to Reports Server <servername> failed and so on.
but after using an ip address or MS loopback adaptor then it works perfect.
in Forms [32 Bit] Version 9.0.4.0.19 (Production) its working with machine name and we do not need ip address and also we can start report server by services.
But in Forms [32 Bit] Version 10.1.2.0.2 (Production) its not the same and all the time we start report server by command.
Is there any solution in Forms [32 Bit] Version 10.1.2.0.2 that run report server without ip or loopback but only work with a machine name?.
sarah

Hi Sarah,
my reports-server works all the time, and i did not do any configuration or install any loopback-adapter. I have a reports-server name like rep_<machine> and can use that in forms also as in URL-syntax.

Please help ! "Oracle Reports Server CGI - Reports Server name is not specified."

Hello Gurus,
I have an html form that allows putting in a parameter. Upon
submit the form, it'll pass a string URL with the parameter to a
new browser.
My url: http://localhost/servlet/oracle.reports.rwcgi.RWServlet?
diary&14252
I also used keymap looks like this
diary: report=Diary.rdf server=servername desformat=pdf
destype=cache userid=id/psswd@db myoid=%1 %*
But I get an Error: The requested URL was not found, or cannot
be served at this time. Oracle Reports Server CGI - Reports
Server name is not specified.
However, if I move the cursor to the end of the same url (or put
a space at the end) and hit Enter, then the report is
displayed. I guess there must be something wrong with my
configuration. Please help. I appreciated any inputs from you.
Thanks in advance.
Ashley

I found the solution to my problem. It was nothing to do with
the cgicmd.dat keymap file, but the html form itself. It's
confused between the url arguments and form arguments from the
submit button. So, what I did was open a new window with all
arguments instead of using the submit function.
Regards,
Ashley

Oracle Apps Report error "Oracle Reports Server CGI - The Reports Server Engine terminated abnormally."

Hi ,
I have modified layout of one existing custom report.
I have added 3 columns in the report , Now when I execute the report sometimes it gets executed with the newly added columns and sometimes it errors out with below error.
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - The Reports Server Engine terminated abnormally.
Any pointers in this regards will be appreciated.
Thanks

I found there were some srw.message statement ( used for debugging purpose) were there , when I removed those statements. This error was gone.

How to change Report Server 10.1.2 from GMT to EST

We have the 10.1.2 Oracle Application Server up and running but the time on the Report Server is GMT. How can the time be changed to EST? Oracle suggested changing a value in a parameter file and a Windows environment variable, neither of which worked. Now, they are saying reinstall the Web Server. Is there any other way? How is this set during the install?
Thanks,
Dave

hi
it was better if you created table first.
now create table for your server name and use select into statment.
and after this if any happend you will be able to change the server name easily by
modifying table.
hope this helps u.
sarah

Report Server Vs Reports Engine

Hi,
Could someone explain the difference between report server and a report engine (advantages vs disadvantages)?
What does lifes remaiming means on a reports engine?
On a 100+ user system, which is better, mulitple reports servers or higher reports engine setting?
Thanks
Edited by: 913146 on 08-Feb-2012 02:35

Hi,
About engLife,you can get the details from the below link.:)
You will also get the information of other report server parameters
http://docs.oracle.com/html/A9210201/pbr_tune.htm#1005700_
Difference between report server and a report engine
Report engine is a part of Report server..When ever a report server starts then the report engine gets initialized and gets available at the same time.
If Report server is down,Report Engine also goes down.
which is better mulitple reports servers or higher reports engine setting?
Now consider this example,
If you have set you Max and Min engine to 3,
Now assume,3 users have simultaneously sent request to execute a report.
These 3 request will be handled by 3 engines available in the report server.
Now in between this,if the 4th user tries to execute another report..since all the engines are full,this request will be in the queue and will be executed once any report engine gets free.
Multiple report server will be helpful,As the load gets balanced between different report servers.
Regards
Fabian

Using Web Services on the Crystal Report Server XI to return reports

Hi,I'm trying to setup for the first time a Crystal Reports Server XI R2 and put a couple of reports onto the server. This is so I can access the reports on the crystal reports server using using the crystal web services and finally display the reports in an ASP.NET web application.So far I have installed the server, created a couple of reports, put them on the server, and tested to see that I can access the reports using the Central Management Console. This all works fine and the reports are returned. Ok, now for the bit that's not working. I've got a C# ASP.NET web application, and I've followed a couple of <a href="http://support.businessobjects.com/documentation/product_guides/cr_net/vs_2005/html/crtsktutorialsotherdynamicpulldownwebservicehelpermethod.htm" target="_blank" title="Adding a Helper Method to Access Crystal Reports Web Services">tutorials</a> to give me an idea of what I should be doing to use the Web Services that are provided: <ul><li>ServerFileReportManager.asmx</li><li>ServerFileReportService.asmx </li></ul>However, it appears that when I list the child objects on the crystal server:<blockquote>serverFileReport = new ServerFileReport(); serverFileReport.ReportPath = ""; reportManagerRequest = new ReportManagerRequest(); reportManagerRequest.ExtraData = serverFileReport.GetExtraData(); reportManagerRequest.ParentUri = serverFileReport.ToUri(); ReportManagerResponse reportManagerResponse = new ReportManagerResponse(); reportManagerResponse = serverFileReportManagerProxy.ListChildObjects(reportManagerRequest);</blockquote>I always get a reportManagerResponse.ReportUris with a count of 0. Now the thing is I know that I have a couple of reports on the Crystal Server, but for some reason they're not been picked up. I must be missing something.Does anyone have any ideas??? Please!Many thanks in advance, ChrisCurrent Set-up:<ul><li>Crystal Reports Server XI R2 (11.5)</li><li>Virtual Directory of the web services: crystalreportviewers115 </li><ul><li>(Physical Path - C:\Program Files\Business Objects\common\3.5\crystalreportviewers115)</li></ul><li>Development Environment: Visual Studio 2005</li></ul>

I looks like your mixing technologies here. You are using Crystal Report Server and the Crystal Report Web Services that come with Visual Studio.I know that this might seem like they are the same product, and the naming does seem confusing but I'll try and make it easy for you to understand.Crystal Reports Server - This is a managed reporting solution which allows you to distribute your reports via the web. It has features like scheduling and built in security.It appears that you have a handle on what Crytal Report Server is from what you have been able to accomplish those far. You have created your report and published it to Crystal Report Server and viewed it via the Central Management Console. Crystal Reports Server has two methods for accessing the reports programatically.1. The Enterprise SDK2. The Web Services SDK<a href="/node/353">Check out this white paper that compares these two SDKs </a><a href="/node/256">This paper describes the Web Services SDK.</a>In the above paper there is a getting started section which points you to the Developer Library which shows you how to install the web services on your Crytal Reports Server machine.Crystal Reports Server does not have the Business Object web services installed by default so I would suggest following the directions in the <a href="http://devlibrary.businessobjects.com/BusinessObjectsXIR2/en/devsuite.htm">Developer Library.</a>The directions wont talk about Crystal Reports Server but these are the directions to get the Web Services installed. There is another web services technology which you are writing code for which is called Crystal Report Web Services. This technology comes with Visual Studio 2003. It provides un-managed reports via webservices. Un-managed means these reports are not published to Crystal Reports Server.So basically your problem is that your code is for Crystal Report Web Services but you are trying to view reports published to Crystal Reports Server. To take advantage of scheduling and security and web service access I would suggest using Crystal Reports Server and install the Business Objects Platform webservices to access the reports. I hope that's clear. Rob Horne <a href="/blog/10">Rob's blog - http://diamond.businessobjects.com/blog/10</a>

Error: Unable to communicate with the Reports Server

The configuration I am working with is:
* Oracle 8.1.6 DB on a Unix machine
* Oracle Reports 6i on an NT machine
* Microsoft IIS web server
I have successfully tested my reports during the development phase of my project. Unfortunately, now that it is considered production and is available to upwards of 30 people, I am getting the following error message after verifying the server is up and after a numerous reports have been served:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Unable to communicate with the Reports Server.
After receiving this message I noticed that the Report Server service is down and the log only indicates that it "shut down immediately". (no ORA messages) I tried restarting the service, but after serving one report, it would shut down again with the same message.
I am wondering if it is a problem related to the cache. I used the default of 50M in the config file, but when the cache directory reaches 50M, the problem seems to appear. I then deleted approx. 30M of files from the cache directory and the Report Server service appeared stable. I changed the cache limit to 1M to see if there was a problem with the cache being so big. All appeared well for the first few hours of operation but then the Report Server service shut down again and upon restart crashed within a minute or two (usually as someone tests a report, it crashes again).
Do I have a configuration problem? Has anyone seen this problem? Thanks in advance.

Hi,
I just found out that if i give
http://localhost/cgi-bin/rwcgi60.exe?key1
where key1 is a key mapping file that contains the report name,username and pwd for the database and desformat...etc..
the report pulls out fine with the correct data..
i am stunned...
while none of the other commands like
http://.../rwcgi60.exe
or
http://..../showenv?server=repserver
or any other usual command doesnt work...
anybody faced this before??
Thanks.

Minimum hardware requirement for Report server with 4 engines ??

Hello all ,
Can someone please tell what is the minimun Hardware requirement to be able to run a Oracle 91 AS with report server having 4 engines ??
and where I can find this kind of documentation.
We have a Oracle9iAS Containers for J2EE running on a machine with under 1 ghz power and around 300 mb RAM
, but the report server seems to keep crashing ..
Can anyone pls advice
Thanks

Hi,
For calculating the minimum hardware requirements, you may need to look at various factors:
1. No of reports requests that need to be processed per second
2. Whether all these requests are synchronous or asynchronous
3. Response time required
4. Type of reports - large amounts of data, large no of images, etc
5. How much caching you are using
6. No of queries in your report
7. Simple / complex layout of the report
and so on.
So just the information of 4 engines may not be sufficient for trying to calculate the hardware requirements. One useful reference point for you may be the Oracle9i Reports Scalability whitepaper:
http://otn.oracle.com/products/reports/index.html
It lists the number of users supported on some pre-defined hardware configurations, and the average response time for the reports server.
You might also want to take a look at the paper on "Tuning Oracle Reports":
http://otn.oracle.com/products/reports/htdocs/search.html?cat=SAP&col=ALC&submit=Search
However, it is also possible that your Reports Server is crashing due to some other problem (not the hardware configuration).
By the way, your RAM seems to be too low for Oracle9iAS installation. See the installation guide for minimum hardware requirements.
Navneet.

Oracle 11i Reports Server Problem

When i tried to exploer the Service
Financials Intelligence - Vision Operations (USA)
in Oracle Applications 11i Server. It gives out the following error
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Unable to communicate with the Reports Server.
Can anyone tell me what may be the cause for this error.
Earliest responses appreciated.
Thnks,
Sundar.

I have checked the reports server . It was not running. When i tried to restart the reports server service. It gives the following error message
Windows could not start the Oracle Report Server [Rep_60_vis] on Local Computer. For more information, review the system event log. If this is a non-Microsoft service, Contact the service vendor , and refer to service-specific error code 186.
BTW, Can you please let me know the file name of the Reports Server script so that i can have a look at it.

The oracle report server (rep60_ machine service returned service specific error 186

dear fellows i have installed 9i 1.2.0 on nt 4 sp5 machine
form is running ok but for report it say
Error: The requested URL was not found,
or cannot be served at this time.
Oracle Reports Server CGI - Unable to communicate with the Reports Server.
when i go to services and try to start service for report
it gives me error
The oracle report server (rep60_<machine> service returned service specific error 186
i have created a service throu start program isuite net8easyconfig
and tested that service come with success
and then copied that tnsname to 806 net80 folder
but in no vain any help

I believe you'll need to edit your tnsnames.ora file located in \ORACLE\806\NET80\ADMIN. The last line of this file should read something like
Rep60_SYSNAME, Rep60_SYSNAME.world = (ADDRESS=(PROTOCOL=tcp) (HOST=SYSNAME) (PORT=1949))
where SYSNAME is the name of the PC Reports is installed on.
I had this same error, and once I modified this file, everything seemd to work fine.
Good Luck
[email protected]

How to configure oracle 6i report server run time component with application server

we got oracle 6i report server for developing the web based reports for our undergoing product. we r succesed in developing the web based reports using oracle 6i report server.But we r facing problems while deploying the product with oracle reports at clients place,why because the client does not have the oracle 6i report server. To solve this problem we have to configure the oracle 6i report server run time component with application server at client side , but we are unable to configure this component(that is CGI handler).

You can run multiple instances of Reports Server in 6i.
In tnsnames.ora, for each server, have a different name and each listening to different port.
For example,
server1.world = (ADDRESS = (PROTOCOL = TCP)(Host = myhost.mydomain.com)(Port = 1949))
server2.world = (ADDRESS = (PROTOCOL = TCP)(Host = myhost.mydomain.com)(Port = 1950))
Also, if you want to know about Reports Server Clustering, you may refer to "Publishing Reports" document on OTN:
http://otn.oracle.com/docs/products/reports/pdf/A73173_01.pdf

I downloaded a song from i-tunes. It plays on my computer, but won't play on my i-phone. Any suggestions on how to fix this? Or how can I re-download the song without getting charged a second time. I could not find an option to "report a problem".

I downloaded a song from i-tunes. It plays on my computer, but won't play on my i-phone. Any suggestions on how to fix this? Or how can I re-download the song without getting charged a second time. I could not find an option to "report a problem".

I could not find an option to "report a problem".
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

Timer option in report server

Similar Messages

Maybe you are looking for